Items where Division is " Engineering and Technology > Department of Metallurgical and Materials Engineering" and Year is 2009

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | G | K | M | N | O | P | S | T
Number of items: 26.

A

Arvind, K (2009) J-R Behaviour of 20MnMoNi55 Pressure Vessel Steel. MTech thesis.

B

Bankoti, A K S (2009) Synergistic study on electrochemically deposited thin film with a spectrum from micro to nano range structures. MTech thesis.

Bisht, Anita (2009) Effect of Heat Treatment Procedures on Microstructure and Mechanical Properties of Nodular Iron. MTech thesis.

C

Chatterjee, Aniruddha and Dash, Biswaranjan (2009) Modeling of Phase Transformation Kinetics of Plain Carbon Steel. BTech thesis.

D

Deb, Susmit Kumar (2009) Reavling of Failure Modes in FRP Composites. BTech thesis.

G

Gaur, Ankur (2009) Effect of Strain Ageing On Welded or Nonwelded Low Carbon Steel. BTech thesis.

Gusaiwal, Hemant Kumar (2009) Synthesis of Al-Si-Ni Nanostructured Materials by Mechanical Alloying. BTech thesis.

K

Kumar, Deepak (2009) Fabrication and Characterization of Al-fly Ash Composite using Stir Casting Method. BTech thesis.

M

Mishra, Gyanaranjan and Baske, Chaitanya Prasad (2009) Characterization of Hybrid FRP composites with Hygrothermal Exposure Under Varied Ambient Conditions. BTech thesis.

Mohakud, Partha Sundar (2009) Structures and Properties of Al-based Al-Si-Ni Nanostructures Developed by Mechanical Alloying. MTech thesis.

Mohanty, Jyotiranjan (2009) Fatigue Life Prediction Under Constant Amplitude and Interspersed Mode-I and Mixed-Mode (I and II) Overload using An Exponential Model. PhD thesis.

Mohapatra, Binayak (2009) Study of Reduction Behaviour Of Iron Ore Lumps. BTech thesis.

Mohapatra, Chiranjeevee (2009) Revealing of Failure Modes of FRP Composites by Microscopic Technique. BTech thesis.

N

Nath, Subhasisa (2009) Study of Reduction Kinetics of Iron Ore Pellets by Noncokingcoal. MTech thesis.

O

Ojha, Soumya and Mahajan, Sahil (2009) Synthesis and Characterization of Ultra Fine Al-cu Powder Particles and Subsequent Dispersion for Heat Transfer Applications. BTech thesis.

P

Panigrahi, Ajit (2009) Characterization of Hybrid FRP Composite with Hydrothermal Exposure Under Varied Ambient Conditions. BTech thesis.

Pati, Rashmi Ranjan and M, Vinay (2009) Reduction Behaviour of Iron Ore Pellets. BTech thesis.

Patra, Dharanidhar (2009) Study of Reduction Behaviour Of Iron Ore Lumps. BTech thesis.

Piprani, Vikas and Samal, Prachi and Sahu, Vaneshwar (2009) Fatigue Life Estimation of Pre-corroded Aluminium Alloy. BTech thesis.

Pradhan, Gaurav and John, David (2009) Erosion Wear Behaviour of Bio-Waste Reinforced Polymer Composites. BTech thesis.

Praharaj, Swetapadma (2009) Processing and Characterization of Fly Ash - Quartz Coatings. MTech thesis.

S

Sabat, Rama Krushna and Rajak, Rahul Kumar (2009) Sliding Wear Behavior of Bio Waste Reinforced Polymer Composite. BTech thesis.

Sahu, Sushanta Kumar (2009) An appraisal of Characteristic Mechanical Properties of Aluminium 6061 alloy – Silicon Carbide (SiCp) Metal Matrix Composite (MMC) exposed to different thermal conditions. MTech thesis.

Samal, Sumanta (2009) Production and Dispersion Stability of Ultrafine Al, Cu and Al-Cu Particles in Base Fluid for Heat Transfer Applications. MTech thesis.

Sarangi, Subhakanta (2009) Fabrication and Characterization of Aluminum-Fly Ash Composite Using Stir Casting Method. BTech thesis.

T

Tripathy, Shuvendu (2009) Studies on Aluminum–Fly-Ash Composite Produced by Impeller Mixing. MTech thesis.

This list was generated on Tue Sep 26 17:37:39 2017 IST.