Items where Division is " Engineering and Technology > Department of Metallurgical and Materials Engineering" and Year is 2012

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Jump to: A | B | D | G | K | M | N | P | S | T | Y
Number of items: 24.

A

Agarwal, Anup and Saha, Sudhir (2012) Determining the flow characteristics of synthetic
slag and optimizing the slag characteristics.
BTech thesis.

Anand, Kshitiz and Vadlamoodi, Kishore and Roy , Seshadri Deb (2012) Synthesis and Characterization of Al-4.5%Cu Alloy Powder Using Mechanical Alloying. BTech thesis.

B

Behera, Gourahari and Sohala, Soumya Ranjan (2012) Effect of copper on the properties of austempered ductile iron castings. BTech thesis.

D

Das, Amar Kumar (2012) Effect of Processing Parameters on Properties of Alloyed Austempered Ductile Iron. MTech by Research thesis.

Dash, Supratik and Mohanty, Nachiketa (2012) Optimization of Flow Characteristics of Blast Furnace Slag. BTech thesis.

Dhal, Satyanarayan and Yadlapalli, Raja (2012) Effect of size and strain rate on deformation
behaviour of Cu50Zr50 metallic glass: A molecular dynamics simulation study.
BTech thesis.

G

Gupta, Mukul and Baghel, Himanshu (2012) Reduction and Swelling Behaviour of Fired Iron Ore Pellets. BTech thesis.

K

Kindo, Ajit Kumar and Goel, Rajesh (2012) Optimization of heat treatment of steel developed for turbine shafts. BTech thesis.

Kumar, Saurabh (2012) Uniaxial Ratcheting Behaviour of SA 508 Steel. MTech thesis.

M

Mohanty, Sibabrata and Mohanty, Abhijeet (2012) Synthesis & Characterization of Copper-Graphite Metal Matrix Composite by Powder Metallurgy Route. BTech thesis.

N

Nath, Chirag Ranjan and Panda, Sanup Kumar (2012) Fatigue Life Estimation of Pre-corroded 7075 Aluminium Alloy. BTech thesis.

P

Panda, Abhisek and Mohapatra, Prabhu Kalyan (2012) Tribological Studies on Al-SiC composite and Al-Si alloy. BTech thesis.

Panda, Sujata (2012) A study on deformation behaviour of Cu- Al2O3 metal matrix composite with the variation of size and volume fraction of reinforcement particle. MTech thesis.

Prakash, Nishant and Gamango, Dhirendra (2012) Study of ratcheting behavior of pure copper and pure aluminum using molecular dynamics simulation. BTech thesis.

Prusty, Dibyaranjan and Pradhan, Hitaindra Kumar (2012) An investigation on texture-property correlation in cold-rolled non-oriented silicon steel. BTech thesis.

S

Saheb, Vikas (2012) Studies on Blast Furnace Slag Flow Characteristics. MTech thesis.

Sahoo, Sandeep Kumar (2012) A Study on the effect of austempering temperature, time and copper addition on the mechanical properties of austempered ductile iron. MTech thesis.

Samal, Chandana Priyadarshini (2012) Microstructure and mechanical property study of cu-graphite metal matrix composite prepared by powder metallurgy route. MTech thesis.

Sarkar, Arindam and Panda, Swayambhu (2012) A development study of Microalloyed steel (HSLA) through experimental exploration. BTech thesis.

Sourav, Pattanayak and Sabyasachi, Panda (2012) Charge Transfer vs Mass Transfer Mechanism in Electrodeposition of Copper thin films: A Structural Exploration. BTech thesis.

Srikar, Potnuru (2012) Studies on the physical properties and reduction-swelling behavior of fired hematite iron ore pellets. MTech thesis.

Srivastava, Anshika and Singh, Priya (2012) Synthesis and Characterisation of Metallic Coating by Pulsed DC. BTech thesis.

T

Tangi, Lakshmana Rao (2012) Effect of processing parameters on austempering behavior of alloyed/unalloyed ductile iron. MTech thesis.

Y

Yadav, Gayatri and ., Chandni (2012) Synthesis and Characterization of Zn/Al2O3 Nanocomposite by Mechanical Alloying Route. BTech thesis.

This list was generated on Sun Nov 19 19:45:54 2017 IST.