Items where Division is " Engineering and Technology > Department of Metallurgical and Materials Engineering" and Year is 2014

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Jump to: Thesis
Number of items: 51.

Thesis

T.M , George Lenin (2014) Development of iron-iron carbide composite by planetary milling and conventional sintering. MTech thesis.

Agarwal, Mukund and Sahoo, Abhishek (2014) Quantification of Qualitative Defects for Automobile Customers. BTech thesis.

Agarwal , N and Mohanty , M (2014) Synthesis and characterization of austenitic stainless steel by mechanical alloying. BTech thesis.

Agrawal, Saurabh (2014) Carbonization of eucalyptus wood and characterization of the properties of chars for application in metallurgy. MTech thesis.

Behera, J K and Sahoo, H (2014) Preparation of synthetic slag in the lab resembling industrial blast furnace slag and study of its flow characteristics. BTech thesis.

Behera, Litu (2014) Mechanical property investigation of hardened and tempered ductile iron. MTech thesis.

Behera, S (2014) Synthesis, characterization and mechanical properties of (Al, Cu)3Ti powder blend by mechanical alloying. MTech thesis.

Bishoyi, Bibhudutta (2014) Laser beam welding of commercially pure titanium sheets. MTech thesis.

Das , A and Singh, G (2014) Plastic deformation and failure studies near a void for copper-aluminium alloy via molecular dynamics simulation. BTech thesis.

Dash, Khushbu (2014) Processing and characterization of Cu-Al2O3 and Al-Al2O3 composites: an evaluation for micro- and nano- particulate reinforcements. PhD thesis.

Dash, Sivasis and Anupam, Antariksh (2014) Improvement of thermal conductivity of water by addition of iron powder. BTech thesis.

Dinkar, V C (2014) Viscous properties of synthetic high alumina
blast furnace slag.
MTech thesis.

Dora, Jay Krishan (2014) Mechanical properties of Pd, Pt and its alloy nanowires studied by molecular dynamics simulations. MTech thesis.

Dungdung, A J and Sethy, R K (2014) Textural and magnetic properties of cross-rolled silicon steels. BTech thesis.

Garg, Subham (2014) Dry and wet grinding behaviour of Fe and Sio2 in specially designed dual drive planetary ball mill. BTech thesis.

Kabijeet, K and Kumar, A (2014) Study of reduction behavior of iron ore lumps by coal. BTech thesis.

Kesavan, Arjun Rajiv (2014) Microstructure and creep properties of MRI230D magnesium alloy. MTech thesis.

Kishor, Rajat (2014) Assessment of Density and Character of Dislocations in Cyclic Loaded Stainless Steel Using X-ray Diffraction Profile Analysis. MTech thesis.

Kumar, Akhilesh (2014) Comparison of Microstructures and Properties of AZ91 and AE42 Magnesium Alloys. BTech thesis.

Kumar, Navratan (2014) Diffusivity studies in Fe-Cr alloys by Molecular dynamics simulations. MTech thesis.

Kumar, Rajnish (2014) Effect of Ag on Sn-Cu Lead Free Solders. MTech thesis.

Kumar, Rakesh (2014) Carbonization study of non coking coals and characterisation of their properties for application in sponge iron making. MTech thesis.

Kumar, Satyajeet (2014) Investigation of fly ash polymer composite. MTech thesis.

Kumar, Suman and Pani , Ashadeep (2014) Hardness, tensile and wear behaviour of a nonconventional austenitic stainless steel upon sensitization. BTech thesis.

Kumar, Sunil and Khan , Arbaz and Pandey, Ankit Kumar (2014) Dry grinding behaviour of Fe and SiO2 in specially designed Dual Drive Planetary Ball Mill. BTech thesis.

Kumbhar, Yudhistir (2014) Microstructure and properties of AE42 magnesium alloy and its composite. BTech thesis.

Mahato, K K (2014) An assessment of mechanical behavior of environmentally conditioned fibre reinforced polymer composites. MTech thesis.

Mahto, Bishnu Prasad (2014) Characterization of ductile iron through fractographic study. MTech thesis.

Maitry, Kheer Sagar (2014) Electrocrystallization of metallic thin films on different substrates: Effect of operating parameters. MTech thesis.

Majhi , Pabitra Kumar and Kumar, Santosh (2014) Effect of tempering temperature & time on impact properties and microstucture of spheroidal graphite iron. BTech thesis.

Mallick, Chinmaya Kumar (2014) Effect of presence of double notch along with various geometry on tensile and compression behaviour of pure copper using molecular dynamics simulation. BTech thesis.

Mishra, Prerna (2014) Determination and characterization of lead free solder alloys. MTech thesis.

Mishra, R and Dash, A (2014) An investigation on texture property correlation in annealed CP-Titanium. BTech thesis.

Narsimhachary, D (2014) Effect of laser welding parameters on 6061 aluminium alloy. MTech by Research thesis.

Nautiyal, Hemant (2014) Effect of overloading and band overloading on fatigue crack growth of aluminum alloy 7075 -T651. MTech thesis.

Nayak, Anil Kumar and Dash, Anuj (2014) Effect of quenching media on properties of aluminium-alumina metal matrix composite. BTech thesis.

Panigrahi, S and Sahoo, B K (2014) Study on flow characteristics of primary blast furnace slag. BTech thesis.

Pragnya, P and Sarma, S (2014) Measurement of synthetic high alumina blast furnace
slags in the laboratory.
BTech thesis.

Reddy, B R (2014) Creep behaviour of Mg-Al-Ca based alloys. MTech thesis.

Sahu, Bibhudatta (2014) Effect of notch geometry on the mechanical properties of pure copper using MD simulation. BTech thesis.

Sahu, Manish (2014) An Investigation on Treatment of Bauxite through Hydrogen Plasma. MTech thesis.

Sahu, Shivangi and Mishra, Soumya (2014) Effects of Thermal Spikes on Hygrothermally and Ultraviolet Radiation Treated Fiber Reinforced Polymer Composites. BTech thesis.

Samal, S K (2014) Studies on plasma processing of blue dust. MTech thesis.

Satyavolu, S (2014) Optimization of production parameters in sms plant, welspun. MTech thesis.

Sen, S and Behera, D K (2014) Wear studies of Al-Si alloys. BTech thesis.

Sethi, Sanghamitra (2014) Environmental Degradation Study of FRP Composites Through Evaluation of Mechanical Properties. PhD thesis.

Singh, S K and Bhengraj, R (2014) Study of Zn-Sn-Al solder alloys. BTech thesis.

Srihar, Nagadamudi and Kunchur , Vishnu (2014) Design and Optimization of Paper Bags. BTech thesis.

Sukumaran, Suvin (2014) Effects of quenching media on the mechanical properties of Al-Al2O3 metal matrix composite. MTech thesis.

Trivedi, A and Seth, S (2014) Reduction behaviour of fired iron ore pellets. BTech thesis.

Upadhyay, Supriya (2014) Low cycle fatigue and post fatigue tensile behavior of a non-conventional austenitic stainless steel. MTech thesis.

This list was generated on Mon Dec 23 11:42:55 2024 IST.