Items where Division is " Engineering and Technology > Department of Metallurgical and Materials Engineering" and Year is 2016
Jump to: Thesis
Number of items: 42.
Ankur, . (2016) Synthesis and Characterization of Nano-Y2O3 Dispersed Zr-based Alloys by Mechanical Alloying and Conventional Sintering. MTech thesis.
Behera, Ranjan Kumar (2016) Development Of Spheroidal Graphite Cast Iron For Nuclear Fuel Transport Cask. PhD thesis.
Bhargava, Banda Venkata (2016) Evaluation of Fracture Toughness of Welded High Strength Low Alloy Line-pipe Steel. MTech thesis.
Bhuyan, Pallabi (2016) Development of Cu-Based Metal Matrix Composites Using Fe3Al as Reinforcement by Powder Metallurgy Route. MTech thesis.
Das, Pranay (2016) Development and Characterization of Zn-Al2O3 Composite. MTech thesis.
Dehury , Ranjit Kumar (2016) Impression Creep and Corrosion Behaviour of MRI230D Magnesium Alloy. MTech thesis.
Dhurandhar, Vikas (2016) Statistical Model for Estimating the Flow Characteristics of Blast Furnace Slag. MTech thesis.
Giriraj, Bhardwaj Ravindra (2016) Numerical Study of Post Welds Residual Stress and Creep Behavior of Inconel 718 and 316 Stainless Steel Joints. MTech thesis.
Gope, Rahul (2016) Synthesis and Characterization of ZrB2-WC-Si Cermets. MTech thesis.
Ila, Joshi Amar Nareshkumar (2016) Effect of Low Temperature on Fatigue Crack Growth Rate of HSLA Steel. MTech thesis.
Jogi, Bhushan (2016) Continuum Modelling of Al-Cu Bimetallic Materials: Stress Intensity Factor Calculations. MTech thesis.
Katakam, Krishna Chaitanya (2016) Deformation Behavior of Radiation Damaged Nano Copper Single Crystal:A Molecular Dynamics Simulation Study. MTech thesis.
Kumar, Ashok (2016) Effect of Al2O3 and MgO on Flow Characerstics of Blast Furnace Slag. MTech thesis.
Lenka, Ramyaranjan (2016) Characterization of The Properties of Some Biomass Species and Estimation of Their Power Generation Potentials. MTech thesis.
Maharana, Himanshu Sekhar (2016) Surface Modification of Copper by Electro-codeposition. PhD thesis.
Mishra, Jitendra Kumar (2016) Effect of Cross-Rolling on Microstructure, Texture and Magnetic Properties of Cold Rolled Non-Oriented Electrical Steels. MTech thesis.
Mishra, Tanvi (2016) Joining of Brass/Copper/Nickel with Stainless Steel by Powder Metallurgy Process. MTech thesis.
Mohanty, Sabyasachi (2016) Effect of Micro Constituents on Wear Properties of Alloyed Ductile Iron. MTech thesis.
Mohanty, Sarat Chandra (2016) Development of CNT Modified GFRP Composite and Assessment of Its Elevated Temperature Mechanical Performance. MTech thesis.
Nayak, Avinas Kumar (2016) Effect of Compact Height and Compaction Pressure on Densification of Tungsten Dispersed and Yttria Dispersed Duplex Stainless Steel Fabricated by High Energy Planetary Milling Followed by Conventional Sintering. MTech thesis.
Nayak, Jagadish (2016) Dynamic Process Modeling of Stainless Steel Making Through AOD Converter. MTech thesis.
Nuthalapati , Mohan (2016) Development of Nano-Tio2/Y2O3 Dispersed Zirconium Alloys By Mechanical Alloying Followed By Conventional and Spark Plasma Sintering. PhD thesis.
Panda, Deepankar (2016) Development of Al-Fe3Al Composites by Powder Metallurgy Route. MTech by Research thesis.
Panda, Surjyakant (2016) Recrystallization Textures in HCP Metals. PhD thesis.
Patra, Sanjeev Kumar (2016) Characterization of Dual Matrix Structured Ductile Iron. MTech thesis.
Phani, Akella Siva Durga (2016) A Comparative Study of the Sn-Ag, Sn-Zn, Sn-Cu, Sn-Bi Lead Free Solder Alloys with the Commercially Available Sn-Pb Solder Alloy. MTech thesis.
Reddy, K Vijay (2016) Prediction of Microstructure for Heat Treatment Process in Dual Phase Steels using Cellular Automata. MTech thesis.
Sahni, Sandeep Kumar (2016) Texture and Microstructure Developments During Hot Rolling of Commercially Pure Titanium. MTech thesis.
Sahu, Deepak Kumar (2016) Sono-Electroplating of Cu-Ni Alloy Thin Films and their Corrosion Behavior. MTech thesis.
Sahu, Ravindra Kumar (2016) Characterization of the Properties of Non–Coking Coals and their CHARS. MTech thesis.
Samantaray, Saphalya Kumar (2016) Effect of Intermetallic Phases on the Tribological Behaviour of Iron and Aluminium alloy. MTech thesis.
Sambaraj, Sravan Kumar (2016) Development of Nano-oxide Dispersed Austenitic Stainless Steels by Mechanical Alloying Followed by Conventional Sintering and Spark Plasma Sintering. MTech by Research thesis.
Saxena, Rishabh (2016) Effect Of Oxide Dispersion On Microstructure, Mechanical, And High Temperature Behaviour Of Tungsten Based Alloys. MTech by Research thesis.
Sharma, Binit Kumar (2016) Microstructure and Impression Creep Behaviour of Mg-Sb Alloys. MTech thesis.
Shashanka , R (2016) Fabrication of Nano-Structured Duplex and Ferritic Stainless Steel by Planetary Milling Followed by Consolidation. PhD thesis.
Singh, Bhanu Pratap (2016) Mechanical Performance Evaluation of Carbon Nanotube Reinforced Polymer Nanocomposites at above Ambient Temperature Environments. MTech thesis.
Singh, Duleshwar (2016) Electrophoretic Deposition of Graphene on Copper and its Corrosion Behaviour. MTech thesis.
Sreenivasan, S (2016) The Role of Ratcheting Deformation on Low Cycle Fatigue Behaviour of Al 7075-T6 Alloy. MTech thesis.
Sriram, Yelumarthy Lakshmi (2016) Deformation Studies of Polymer Matrix Composites Reinforced With Jute Fibre: A Continuum Modelling Approach. MTech thesis.
Swain , Biswajit Kumar (2016) Plasma Smelting of Iron Ore Fines Having High Silica Content. MTech thesis.
Tripathy , Subhrasmita (2016) Effect of Pre-strain and Pre-corrosion on Ratcheting Behavior of ASTM A668 Class D Steel. MTech by Research thesis.
Upadhyay, Pundrikaksha (2016) Corrosion Behavior of 304 Stainless Steel in Borate Buffer Solution:Effects of pH & Chloride Ions. MTech thesis.