Items where Division is " Engineering and Technology > Department of Metallurgical and Materials Engineering" and Year is 2018

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Number of items: 27.

Annam, Dinesh Kumar (2018) Microstructure and Impression Creep Behaviour of AZ91 Alloy with Trace Additions of Sb and Sr. MTech thesis.

Behera, Biplab (2018) Selection of vacuum pressure and vacuum implication
position during steel making through RH degasser for maximizing recirculation process.
MTech thesis.

Behera, Kishore Kumar (2018) Optimisation of Ferrochrome Addition Using Multi-Objective
Evolutionary and Genetic Algorithms for Stainless Steel Making
via AOD Converter.
MTech thesis.

Debta, Malaya Kumar (2018) Characterisation of Texture Evolution in Commercially Pure Titanium through VPSC Simulation: a Case Study to Investigate the Role of Strain-Paths on Texture Evolution. MTech thesis.

Dewangan, Gainendra Kumar (2018) Fatigue Crack-macrocrack Interaction in 316 Stainless Steel Sheet. MTech thesis.

Fulmali, Abhinav O. (2018) Effect of CNT/CNT-COOH Addition on Creep Performance and Water Absorption Behaviour of Embedded Glass Fiber/Epoxy Composites. MTech thesis.

Gupta, Pallavi (2018) Effect of Pre-Strain on Low Cycle Fatigue Behavior of Aluminium 7075 T6 Alloy. MTech thesis.

Jindal, Nikhil (2018) Development of Lead Free sn-bi-cu Solder Alloy. MTech thesis.

Kattaguri, Rani (2018) Resistance of CNF Modified Glass Fiber/Epoxy Composites
Towards Various Corrosive Fluids.
MTech thesis.

Kumar, Sudhanshu (2018) Processing Bio-char and Study of Dielectric Behaviour of Castor Plant Biomass. MTech thesis.

Kumar, Sunil (2018) Effect of Different Heat Treatment Parameters and Copper Addition on the Mechanical Properties of Austempered Ductile Iron (ADI). MTech thesis.

Midathada , Sai Venkat Ravi Kishor (2018) Characterisation of Bricks Fabricated Using fly-ash with Different Additive Materials Namely Granite-powder,Alite-
cement and Black-sand in Different Compositions for High temperature furnace lining.
MTech thesis.

Mishra, Srimant Kumar (2018) Ratcheting and ratcheting-creep interaction in A356 aluminium
alloy.
PhD thesis.

Parhi, Bikash Ranjan (2018) Reduction of Bauxite through Hydrogen: Future Method of Extraction of Aluminium. PhD thesis.

Patidar, Divyank (2018) Estimation of Power Generation Potential of Agricultural Based Biomass Residues and Coal–Biomass Mixed pellets. MTech thesis.

Pattnaik, Deepankar (2018) Processing Value Added Material From Bamboo
Leaves and a Wild Plant.
MTech thesis.

Prajapat, Vivek (2018) Synthesis and Characterization of Ni-WC-Zr Nanocomposite Coating by Electrodeposition. MTech thesis.

Singh, Rohit (2018) Tensile Behavior of Cold Welded Metal-Metallic Glass: a Molecular Dynamics Simulation Study. MTech thesis.

Singh, Sandeep Kumar (2018) Enhancement of Recirculation Process for RH Degasser Steel Making Through Bottom purging Inert Gas: A CFD based Investigation. MTech thesis.

Solanki, Madhav Singh (2018) Fatigue Behavior Analysis of Medium Carbon Steel. MTech thesis.

Srinivasanaik, Azmeera (2018) AFM and STM Characterization of Electrochemically Synthesized Few-Layer Graphene Nano-Sheets. MTech thesis.

Talekar, Vikram Rambhau (2018) Fabrication and Characterization of Various Nano-oxides Dispersed W-Ni Alloys by Mechanical Alloying and Conventional Sintering. MTech thesis.

Teja , Undru Prasanna Ravi (2018) Synthesis of Cu/Gr Nano-composites by Electrodeposition Route. MTech thesis.

Verma, Sarthak (2018) Milling Characteristics of BCC, FCC and HCP Metals. MTech thesis.

Yadav, Deepak (2018) Cyclic Nano-Indentation study of Sintered Aluminium and Aluminium-Copper Alloy Reinforced (Cu66Zr34) Metallic Glass Composites: A Molecular Dynamics Study. MTech thesis.

Yadav, Sunil Kumar (2018) Recrystallization Texture Evolutionin Ti-6Al-4V Alloys. MTech thesis.

Yadlapalli , Bharath Kumar (2018) Synthesis and Characterization of Cr-WC Composite Coatings by Electrocodeposition. MTech thesis.

This list was generated on Sat Nov 2 16:52:49 2024 IST.