Items where Subject is "Engineering and Technology > Metallurgical and Materials Science > Mechanical Alloying"
Group by: Creators | Item Type
Jump to: Thesis
Number of items at this level: 34.
Lakra, Paul Pramod (2013) Nano-Indentation Deformation Studies of Al-Cu Alloy Via Molecular Dynamic Simulation. MTech thesis.
Nayak, Debasis (2013) Grain size stabilization of Fe and Fe-Ni nanostructures developed by mechanical alloying. MTech thesis.
Abhinay, Seelamanthula V (2015) Fatigue Crack Growth Prediction of Band Overloaded 7075-T651 Aluminium Alloy by Exponential Model and Gamma Model. MTech by Research thesis.
Agarwal, Mukund and Sahoo, Abhishek (2014) Quantification of Qualitative Defects for Automobile Customers. BTech thesis.
Agarwal , N and Mohanty , M (2014) Synthesis and characterization of austenitic stainless steel by mechanical alloying. BTech thesis.
Anand, Kshitiz and Vadlamoodi, Kishore and Roy , Seshadri Deb (2012) Synthesis and Characterization of Al-4.5%Cu Alloy Powder Using Mechanical Alloying. BTech thesis.
Bankoti, Anil Kumar Singh (2017) Creep, tensile and corrosion behaviour of Ca and/or Sb added AZ91 Mg alloys. PhD thesis.
Behera, Bibhu Prasad and Jena, Saroj Kumar (2013) Synthesis of Nano-Structured Stainless Steel
Behera, Bishnupriya (2011) Microstructural and magnetic properties of in-situ and ball mill synthesized LSMO: CoFe2O4 nanocomposites using microwave oven. MTech thesis.
Behera, Ranjan Kumar (2016) Development Of Spheroidal Graphite Cast Iron For Nuclear Fuel Transport Cask. PhD thesis.
Biswal, Sweta Rani (2013) Fatigue Behaviour Analysis Of Differently Heat Treated Medium Carbon Steel. MTech by Research thesis.
Das , A and Singh, G (2014) Plastic deformation and failure studies near a void for copper-aluminium alloy via molecular dynamics simulation. BTech thesis.
Dash, Sudhir Kumar and Horo, Rajan (2013) Synthesis of Nano-dispersed TiO2 Zirconium Based Alloy by
Garg, Subham (2014) Dry and wet grinding behaviour of Fe and Sio2 in specially designed dual drive planetary ball mill. BTech thesis.
Gupta, Kapil Kumar and Bhattamishra, Smarak Dash (2015) Effect of Addition of Al to Sn-Zn Solder Alloys. BTech thesis.
Gupta, Shalabh (2015) Synthesis of Nano-Structured Duplex and Ferritic Stainless Steel Powders by Planetary Milling: an Experimental and Simulation Study. MTech thesis.
Kanungo, Nishank and Sharma, Ankur (2010) Preparation and characterization of Copper-Chromium nanostructures by Mechanical milling. BTech thesis.
Kumar, Akhilesh (2014) Comparison of Microstructures and Properties of AZ91 and AE42 Magnesium Alloys. BTech thesis.
Kumar, Pankaj (2015) Tribological Behaviour of Iron-Aluminium Alloy. MTech thesis.
Kumar, Sunil and Khan , Arbaz and Pandey, Ankit Kumar (2014) Dry grinding behaviour of Fe and SiO2 in specially designed Dual Drive Planetary Ball Mill. BTech thesis.
Mishra, Manas Kumar (2013) A Study of Intermetallics in Cu-Sn system and Development of Sn-Zn Based Lead Free Solders. MTech thesis.
Nuthalapati , Mohan (2016) Development of Nano-Tio2/Y2O3 Dispersed Zirconium Alloys By Mechanical Alloying Followed By Conventional and Spark Plasma Sintering. PhD thesis.
Panda, Deepankar (2016) Development of Al-Fe3Al Composites by Powder Metallurgy Route. MTech by Research thesis.
Panda, Surjyakant (2016) Recrystallization Textures in HCP Metals. PhD thesis.
Rai, Shantanu and Roy, Deepanjan (2008) Sintering Characteristics And Characterisation Of Al-Mn-Ce Nanostructured Material Prepared By Mechanical Alloying. BTech thesis.
Rajput, Abhimanyu and Bhuyan, Prashant (2011) High Energy Planetary Milling Of Fe, Cr & Ni Powder. BTech thesis.
Sahu, Sushanta Kumar (2009) An appraisal of Characteristic Mechanical Properties of Aluminium 6061 alloy – Silicon Carbide (SiCp) Metal Matrix Composite (MMC) exposed to different thermal conditions. MTech thesis.
Samal, Sumanta (2009) Production and Dispersion Stability of Ultrafine Al, Cu and Al-Cu Particles in Base Fluid for Heat Transfer Applications. MTech thesis.
Sambaraj, Sravan Kumar (2016) Development of Nano-oxide Dispersed Austenitic Stainless Steels by Mechanical Alloying Followed by Conventional Sintering and Spark Plasma Sintering. MTech by Research thesis.
Shama, Shaik (2017) Comparison of Mechanical Properties of Austenitic Ductile Cast Iron with Ferritic/Pearlitic Ductile Cast Iron. MTech by Research thesis.
Shashanka , R (2016) Fabrication of Nano-Structured Duplex and Ferritic Stainless Steel by Planetary Milling Followed by Consolidation. PhD thesis.
Swain, Susanta Kumar (2015) Property Development in As-Cast Heavy Section SG Iron Castings by Alloying with Nickel and Copper. PhD thesis.
Vedant, Rajan (2015) Development of ZrB2-B4C-Mo Ceramic Matrix Composite for High Temperature Applications. MTech thesis.
Yadav, Gayatri and ., Chandni (2012) Synthesis and Characterization of Zn/Al2O3 Nanocomposite by Mechanical Alloying Route. BTech thesis.