Number of items: 30.
Bag, Mousom (2011) Development of Environment Friendly New Generation MgO-C Brick Using Nano Carbon. MTech thesis.
Baskey, Anupama (2011) Effect of additives on the decomposition, densification and phase analysis of zircon. BTech thesis.
Biswal, Amit Kumar (2011) Development of GeO2 and LaF3 based glass ceramics. BTech thesis.
Chakrabarti, Arundhati (2011) Effect of Some Isovalent and Aliovalent Substitutions on Structure and Ferroelectric Properties of BaBi4Ti4O15. PhD thesis.
Das, Anubhav (2011) On the Synthesis of new four-layered Aurivillius compound Bi2MNa2Nb4O15 (M= Ca, Sr, Ba). BTech thesis.
Das, Shibani (2011) Study of decomposition behaviour of binders and the effect of binder type on strength and density of alumina samples. BTech thesis.
Das, Suraj Kumar (2011) Synthesis and Characterization of BST Ceramics by Solution Combustion Technique. BTech thesis.
Dash, Chandan (2011) Synthesis of lithium titanate by auto combustion method and study of its densification behavior with different binder concentration. BTech thesis.
Dutta, Debabrata (2011) Utilization of blast furnace slag as a raw material for the manufacture of portland cement clinker. MTech thesis.
Gupta, Brijesh Kumar (2011) Fabrication of Li2TiO3 pebble by studying the effect of binder content and sintering temperature on pellets. BTech thesis.
Kumar, Prashant (2011) Preparation and Densification study of Barium Zirconate (BaZrO3) nanopowders. BTech thesis.
Kumar, Rahul (2011) Development of Low Bulk Density Fireclay Insulation Brick. BTech thesis.
Kundan, Paswan (2011) Sintering study of Mag-Al Spinel synthesized via combustion synthesis using glycine as fuel. BTech thesis.
Majhi, Manoj Kumar (2011) Effect of span length on bending strength and Weibull modulus of sintered alumina bar. BTech thesis.
Mallick, Jyoti Prakash (2011) A comparative study of the structure & magnetic properties of nickel cobalt ferrites synthesized by solid state & auto-combustion processing techniques. BTech thesis.
Meena, Seema N (2011) Effect of Particle Size Distribution on Properties of
Alumina Refractories. BTech thesis.
Mishra, Pahupati Nath (2011) Structural and Microstructural Characterization of NiO-8YSZ Nanopowders With Varying Weight Percentage of NiO. BTech thesis.
Mohanty, Debajyoti (2011) Effect of sintering on some properties of NiZn-ferrite. BTech thesis.
Mohanty, Debesh Daulat (2011) Effect of Holding time on Binder Burnout, Density and Strength of Green and Sintered Alumina Samples. BTech thesis.
Mohanty, Rahul (2011) Microwave and Solid State Assisted Synthesis of Lsmo: NiFe2O4 Nanocomposites and comparative study of its microstructural and magnetic properties. BTech thesis.
Nagar, Rahul (2011) Preparation of diopside by novel sol-gel method using rice husk ash as silica source. BTech thesis.
Panda, Alok Kumar (2011) Preparation and characterization of Hydroxyapatite-Barium Titanate Composite. BTech thesis.
Patgiri, Deepak (2011) Synthesis of NiO-8YSZ nanopowders by co-precipitation method
and its structrual and microstructural characterization. BTech thesis.
Pradhan, Sunil Kumar (2011) Characterization of Pb -free “x [Ba (Zr0.2Ti0.8) O3] - (1- x) [(Ba0.7Ca0.3) TiO3]”Ceramics Synthesized by Solid State Reaction Route. BTech thesis.
Praksh, Rahul (2011) Synthesis, characterization and effect of atmosphere on sintering behavior of BaTiO3 nano-powders. BTech thesis.
Ratre, Mukesh (2011) Development of Y2O3 : Er2O3 system and its dispersion study in different media. BTech thesis.
Satapathy, Akash (2011) Effect of different binders on High Alumina Self Flow Castable. BTech thesis.
Shukla, Swapna Samir (2011) Synthesis and dispersion of barium stannate nanopowders. BTech thesis.
Srivastava, Kamal Nayan (2011) Development of GeO2 -BaF2 based glass ceramic. BTech thesis.
Varadrajan, Namitha (2011) A comparative study of microstructural and magnetic properties of lsmo: NiFe2O4 nanocomposites prepared by microwave and solid state route. BTech thesis.
This list was generated on Fri Apr 19 18:37:34 2024 IST.
