Number of items: 88.
Singh, Bhagat (2011) Study of damping in layered and welded
beams. PhD thesis.
A, J S N B Vamsee (2011) Dynamicanalysis of electrostatically exited micro cantilever beam. MTech thesis.
Agrawal, Sonam (2011) Effective Thermal Conductivity of Epoxy Matrix Composites Filled With Titania(TiO2) Powder. BTech thesis.
Akash, Pandey (2011) Performance analysis of a compact heat exchanger. MTech thesis.
Bandhu, Arpan and Panda, Atula Kumar (2011) Navigation and Control of Automated Guided Vehicle using Fuzzy Inference System and Neural Network Technique. BTech thesis.
Bansal, Rajan (2011) Improving dimensional accuracy of fused deposition modelling (FDM) parts using response surface methodology. BTech thesis.
Bathala, Srikanth (2011) Composites for machine tool beds. MTech thesis.
Behera, Bikash Chandra (2011) Development and experimental study of machining parameters in ultrasonic vibration-assisted turning. MTech thesis.
Behera, Bismay Kumar (2011) Parametric optimizartion of microdrilling in aerospace material. BTech thesis.
Bhivate, Parth (2011) Modelling & development of antilock braking system. BTech thesis.
Bhola, Deepak Ranjan (2011) CFD analysis of flow through venturi of carburetor. BTech thesis.
Bhushan, Jitendra (2011) Helium Purification by Gas Adsorption method. MTech thesis.
Bhuyan, Rajat Narayan (2011) Material Flow System in Robotic Assembly. BTech thesis.
Boity, Biswajit (2011) Dry sliding wear response of LD slag filled poly-ether-ether ketone composites. BTech thesis.
Chaubey, Santosh (2011) Modeling and Design of Die Profile of Extrusion of Square Section from Round Billet through Non-linear Converging Dies. MTech thesis.
Choudhury, Ajoy Kumar (2011) Investigation on electrochemical machining(ECM) for optimization of surface roughness using response surface methodolgy(RSM). BTech thesis.
Choudhury, Sasanka (2011) Identification of Transverse Crack in a Cracked Cantilever Beam Using Fuzzy Logic and Kohonen Network. MTech thesis.
Dalai, Harekrushna (2011) Case studies on productivity improvement and supplier selection. BTech thesis.
Darun , Prasath.L (2011) Economic design of X-bar control chart using simulated annealing. BTech thesis.
Das, Bablu (2011) Estimation of Power Generation Potential of Non- Woody Biomass and Coal – Biomass Mixed Briquettes. MTech thesis.
Das, Liza (2011) Effective Thermal Conductivity of Epoxy Matrix Composites Filled With Aluminium Powder. BTech thesis.
Das, Sidharth and Baral, Joy and Chatterjee, Peenak (2011) Active vibration control of piezo-laminated cantilever beam. BTech thesis.
Debnath, Kishore (2011) A study on mechanical behavior and damage assessment of short bamboo fiber based polymer composites. MTech thesis.
Devadasi, Vickey and Garg, Shubham and Sahoo, Suryakant (2011) Dynamic behavior of Sandwich Beam with Piezoelectric layers. BTech thesis.
Ganjir, Rahul (2011) Optimisation of Process Parameter in ECM by using Rotary U Shaped tool. MTech thesis.
Ganti, Vinay (2011) Analysis of 4-dof force/torque sensor for intelligent gripper. BTech thesis.
Gupta, Deepak (2011) Design and Analysis of a Horizontal Shaft Impact Crusher. BTech thesis.
Gupta, Gajanand (2011) Economic Design of X-bar control chart using particle swarm optimization. MTech thesis.
Gupta, Nand Lal (2011) Optimization of Micro-Wire EDM Operation Using Grey Taguchi Method. BTech thesis.
Gupta, Sanyukta (2011) Preparation and Characterization of Waste Silk Fiber Reinforced Polymer Composites. MTech by Research thesis.
Hansda, Sanjib Kr. (2011) Machinability Study of AISI 316 Grade Austenitic Stainless Steel Using P 30 Grade Cemented Carbide Insert. BTech thesis.
Jaiswal, Abhash (2011) Effect of hydrogen induction on co mbustion, performance and emission behaviour of compression ignition engine using used transformer oil as a main fuel. MTech thesis.
Kalo, Roupyakanta (2011) Design of reconfigurable manufacturing system. BTech thesis.
Kanaujia, Kamal Kumar (2011) An Investigation of Dissimilar Welding Joint of AISI 304L
Stainless Steel with Pure Copper by Nd:YAG Pulse Laser: Optimization of Tensile Strength. MTech thesis.
Kesarwani, Vishal (2011) Investigation on Electric Discharge Machine for optimization of Surface Roughness using Response Surface Methodology approach. BTech thesis.
Kisku, Ram Chandra (2011) Modelling of temperature profile in turning with uncoated and coated cemented carbide insert. BTech thesis.
Kumar, Nikhil (2011) Vibrational Analysis Of Laminated Composite Beam. BTech thesis.
Kumar, Nishant (2011) Optimizing the cutting parameters using taguchi method to reduce the cutting tool vibration. BTech thesis.
Kumar, Pradeep (2011) Optimization of structural parameters using artificial neural network for vibration reduction in beams. BTech thesis.
Kumar, Ravi (2011) Design Fabrication and Testing of Gearbox for Fault Detection. BTech thesis.
Kumar, Shashi (2011) Prediction of crack propagation using γ-model for through wall cracked Pipes. MTech thesis.
Kumar , Sumit (2011) Analysis of radiative heat transfer in an absorbing-emitting-scattering medium using fluent. MTech thesis.
Kundu , Shubhasri (2011) Control of Real Mobile Robot Using Artificial Intelligence Technique. MTech thesis.
Maharana, Birendra Kumar (2011) Optimization of Process Parameters in Laser Sheet Metal Bending. BTech thesis.
Maiti, Trijit Kumar (2011) Development and Study of a Helium Purifier based on Low Temperature High Pressure Adsorption of Impurities. MTech by Research thesis.
Meda, Venkata Saikumar (2011) Optimization of Induction Length and Flow Rates of Acetylene in Diesel Engine. MTech thesis.
Meena, Vishvendra and Saroya, Avtar (2011) Study of Mechanical Properties of Hybrid Natural Fiber Composite. BTech thesis.
Mishra, Kaushik (2011) Scheduling of automated guided vehicles in a FMS Environment using particle swarm optimization. BTech thesis.
Mishra, Punyapriya (2011) Development and Characterization of Low Cost Composite from Sugarcane Bagasse Waste. PhD thesis.
Mishra, Tanmaya (2011) Machine Loading in Flexible Manufacturing system using Artificial Immune algorithm. BTech thesis.
Mohanta, Jagadish Chandra (2011) Navigational control of multiple mobile robots in various environments. PhD thesis.
Mohanty, Chiranjiv (2011) Experimental investigation of the combustion, performance and emission parameters of a compression ignition engine using blends of vegetable oil and diesel fuel. BTech thesis.
Mohapatra, Chinmoy Krushna (2011) Computer aided analysis of balancing of multi cylinder radial and v- engines. BTech thesis.
Mondal, Arpan Kumar (2011) An investigation on characterization of bio-composites. MTech thesis.
Nath, Rashmi Ranjan (2011) Design and Analysis of Thick walled cylinders with holes. BTech thesis.
Nathan, Senthil (2011) Service Quality in Power Sector. BTech thesis.
Nayak, Sarthak (2011) Study of chip breaker on turning of stainless steel. BTech thesis.
Padhy, Durga Madhab (2011) A case study on Application of FUZZY logic in Electrical Discharge Machining(EDM). BTech thesis.
Pavankumar, Vodnala (2011) Damping of machine tool structures with riveted joints. MTech thesis.
Pullagura, Gandhi (2011) Effect of hydrogen enrichment on the performance emissions and combustion parameters of a complete biofueled diesel engine. MTech thesis.
Rath, Deepali (2011) Development of a gasifier for fueling of a diesel engine. BTech thesis.
Roul, Shakti Prasad (2011) Application of Ant Colony Optimization for finding
Navigational Path of mobile robot. BTech thesis.
Rout, Matruprasad (2011) Flow stress and barreling behavior of aluminum alloy during upset forging at elevated temperature. MTech thesis.
Saeed, Ahmed (2011) Path synthesis of four-bar mechanism using harmony search optimization. BTech thesis.
Saha, Saurav (2011) A study on effect of fiber parameters on mechanical behavior of natural fiber based polymer composites. BTech thesis.
Sahoo, Alok Kumar (2011) Dry Sliding Wear Response of Fly Ash Filled Poly-Ether-Ether-Ketone Composites. BTech thesis.
Sahoo, Biranchi Narayan (2011) Effect of Cryogenic Treatment of Cemented Carbide Inserts on Properties & Performance Evaluation in Machining of Stainless Steel. MTech thesis.
Sahoo, Swati (2011) Study of Capillary Filling Dynamics in a Microtube. BTech thesis.
Sahoo , Smrutiranjan (2011) Prediction of machining parameters for optimum Surface Roughness in turning SS 304. BTech thesis.
Sahu, Ashish Kumar (2011) Dynamic analysis of a simply supported beam with crack. BTech thesis.
Sahu, Ranjeet Kumar (2011) An investigation on dimensional accuracy of fused deposition modeling (FDM) processed parts using fuzzy logic. MTech thesis.
Sahu, Sasmita (2011) Vibration Analysis of Cracked Beam using Intelligent Technique. MTech by Research thesis.
Sain, Suresh (2011) CFD analysis of flow pattern in electrochemical machining. BTech thesis.
Saraf, Kunal Kumar (2011) Study of effective thermal condutivity of copper filled epoxy base composite. BTech thesis.
Sarangi, Sangita (2011) Optimization of Robot Motion Planning using Ant Colony
Optimization. MTech thesis.
Sarma, Sushanta (2011) Parametric optimization of turning operation on stainless steel using a carbide tool. BTech thesis.
Sethy, Soumya Ranjan (2011) A Study on Mechanical Behavior of Surface Modified Natural Fiber Based Polymer Composites. BTech thesis.
Shrivastava, Amit Kumar (2011) Optimization of robotic assembly of printed circuit board by using evolutionary algorithm. MTech thesis.
Shukla, Shankar Prasad (2011) Investigation in to tribo potential of rice husk (RH) char reinforced epoxy composite. MTech thesis.
Singh, Sarthak Sambit and Patnaik, Shantanu and Tripathy, Suraj (2011) Fatigue Crack Growth of Circular Pipes and Modeling of Single-Edge-Notched Tension (SENT) Specimen. BTech thesis.
Singh, Vivek (2011) A Brief Study on Dynamics of Viscoelastic Rotors – An Operator Based Approach. MTech thesis.
Sood, Anoop Kumar (2011) Study on Parametric Optimization of Fused Deposition Modelling (FDM) Process. PhD thesis.
Soreng, Ajit (2011) Performance of multilayer coated tool in dry machining of AISI 316 austenitic stainless steel. BTech thesis.
Swain, Manisha (2011) Study of Capillary Filling Dynamics in a Microchannel. BTech thesis.
V, Devaraj and Chhabra, Yatin (2011) Mathematical and Optimization Analysis of a Miniature Stirling Cryo-cooler. BTech thesis.
Veluri, Gangadhar (2011) Rub-impact analysis in rotor dynamic systems. MTech thesis.
Vishwakarma, Umesh Kumar (2011) Modelling of Micro Electro Discharge Machining in Aerospace Material. MTech thesis.
Yadav, Utkarsh (2011) Multi-criteria decision making approach for vendor selection. BTech thesis.
This list was generated on Fri May 10 18:17:35 2024 IST.
