Number of items: 37.
Gupta, Sujasha and Gupta, Savita (2013) Effect of thermal shock and loading rate on the microstructure and properties of Cu/Al2O3 composites. BTech thesis.
Jain, Reliance (2013) Study of SG iron and its tribological behaviour. MTech thesis.
Kumar, Rajnish (2013) Studies on the physical properties and reduction-swelling behavior of fired haematite iron ore pellets. MTech thesis.
Kumar , Ajnish (2013) Effect of Ti & Al addition on the mechanical properties of Cu-Zr based metallic glasses: A molecular dynamic simulation study. MTech thesis.
Lakra, Paul Pramod (2013) Nano-Indentation Deformation Studies of Al-Cu Alloy Via Molecular Dynamic Simulation. MTech thesis.
Mehta, Gaurav and Patra, Hrushikesh (2013) Effect of size, temperature and strain rate on deformation behavior of nickel nanowires: A molecular dynamics simulation study. BTech thesis.
Mohapatra, Shanta (2013) Processing, Microstructure and Properties of Hybrid
Metallic and Ceramic Reinforced Aluminium Composites. MTech thesis.
Moharana, Madhusmita (2013) Mapping of structures and properties evolved during sono-electroplating of nickel thin films. MTech thesis.
Nayak, Debasis (2013) Grain size stabilization of Fe and Fe-Ni nanostructures developed by mechanical alloying. MTech thesis.
Patel , Sumeet Sekhar and Mohapatra, Swastik (2013) Stabilisation of Fe based nano-structures developed
through mechanical milling. BTech thesis.
Ranjan , Atul and Ranjan, Manindra (2013) Effect of Isothermal Annealing Temperature and Cooling Rate on Mechanical Properties of Ductile Iron. BTech thesis.
Sahoo, Sanjay Kumar and Pal , Siddharth (2013) Recrystallization Texture Development in CP-Titanium. BTech thesis.
Sahu , Lopamudra (2013) Ratcheting behavior of a non-conventional stainless steel and it's associated microstructural variations. MTech thesis.
Sampark , P. and Majhi , Goutam Kumar (2013) Deformation Induced Phase Transformation of 304L Stainless Steel and its Structural Characterization. BTech thesis.
Sethy, Bipin Kumar and Mishra, Siddharth (2013) Nano-Indentation of Copper – Nickel thin films -A Molecular Dynamics Simulation Study. BTech thesis.
Singhal, Aneesh and Kadiyan, Abhimanyu (2013) Location and extent of cohesive zone in the blast furnace as related to the degree of reduction of iron ore pellets/iron ore. BTech thesis.
., Divya and Kamal, Zeba (2013) Ratcheting Behaviour of Nano-Scale Copper by Classical Molecular Dynamics Simulations. BTech thesis.
Agarwal, Ripu Sudan and Hembram, Sachin (2013) To Study The Reduction And Swelling Behaviour Of Iron Ore Pellets. BTech thesis.
Bagwan , Manish (2013) Prediction of adhesive strength, deposition efficiecny and wear behaviour of plasma spray coating of low grade mineral on mild steel and copper Substrate by soft computing technique. MTech thesis.
Behera, Bibhu Prasad and Jena, Saroj Kumar (2013) Synthesis of Nano-Structured Stainless Steel
Powder by Mechanical Alloying and
Characterization. BTech thesis.
Biswal, Sweta Rani (2013) Fatigue Behaviour Analysis Of Differently Heat Treated Medium Carbon Steel. MTech by Research thesis.
Chaturvedi, Abhishek (2013) Low cycle fatigue behaviour of AISI 308 stainless steel weld metal. MTech thesis.
Dash, Sudhir Kumar and Horo, Rajan (2013) Synthesis of Nano-dispersed TiO2 Zirconium Based Alloy by
Mechanical Alloying. BTech thesis.
Daspattanayak, Tusharkanta and Mohanty, Kaibalya (2013) Effect of heat treatment on wear properties of plain carbon steel. BTech thesis.
Goenka, Mahesh and Naik, Abhishek (2013) Effect of size distribution and water content on properties of iron ore pellets. BTech thesis.
Lakra, Suprabha Charjren (2013) Synthesis and characterization of Pulsed- Electrodeposited Cr and Cr-ZrO2 Coating. MTech thesis.
Maity, Sabarna and Sabarna, Sambal Shashank (2013) Synthesis and Characterization of Zn-Al2O3Composite. BTech thesis.
Mishra, Manas Kumar (2013) A Study of Intermetallics in Cu-Sn system and Development of Sn-Zn Based Lead Free Solders. MTech thesis.
Mohapatra, Pratyasha and Sahoo , Swayam Prakash (2013) Studies on Erosion Wear Behaviour of Al-3Mg-10SiC Composite. BTech thesis.
Nag, Saurendra and Talluri, Neeradh (2013) Processing, Microstructure and Properties of Micro and Nano Alumina Reinforced Aluminium Composites. BTech thesis.
Nayak, Dillip kumar and Rajesh kumar , Palai (2013) To study the effect of strain rate on tensile properties and high cycle fatigue behaviour of if steel. BTech thesis.
Parihar, Jyoti Singh (2013) Wear behavior and electrical conductivity study of Cu-graphite MMC prepared by powder metallurgy route. MTech thesis.
Phanindra, Srungavarapu Durga and Reddy, Ankireddypalle Hema Sagar (2013) Electrochemical analysis of austenitic stainless steel of type 304L SS in nitric acid medium. BTech thesis.
Raj, Sanjay (2013) Significance of Activation Energy in Process Metallurgy. MTech thesis.
Sahoo , Baidehish (2013) Recrystallization Texture development in CP-Titanium. MTech thesis.
Sarangi, Rama Chandra (2013) A Study of Processing of Indium Doped Semiconductor Material. MTech thesis.
Tulip, Sudhanshu Sekhar and Shekhar, Raj (2013) An Assessment of Mechanical Behavior on High Temperature and Different Volume Fraction of Glass Fiber Reinforced Polymer Composites. BTech thesis.
This list was generated on Sat Dec 21 22:07:12 2024 IST.
