Items where Division is " Engineering and Technology > Department of Metallurgical and Materials Engineering" and Year is 2017

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | K | M | N | P | R | S | V
Number of items: 32.

A

A., Usha Kiran (2017) Study on Flow Characteristics of Synthetic Slag. MTech thesis.

Aabasaheb, Sardar Parag (2017) Development of Nano-Y2O3 Dispersed Zirconium Alloys Synthesized by Mechanical Alloying Consolidated by Pulse Plasma Sintering. MTech thesis.

B

Bankoti, Anil Kumar Singh (2017) Creep, tensile and corrosion behaviour of Ca and/or Sb added AZ91 Mg alloys. PhD thesis.

Bansal Darji, Vinaykumar (2017) Finite Element Analysis for Adhesive Bonding Strength of Steel and FRP Composite Joint. MTech thesis.

Behera, Jagabandhu (2017) Effect of Different Heat Treatment Parameters on Mechanical Properties of DMS Ductile Iron. MTech thesis.

Bhatnagar, Shrey (2017) Structure Property Correlation of Cu-Al-V2O5 Composite Coating Prepared by Electro-Codeposition from Al-V2O5 Dispersed Bath. MTech thesis.

Biswal, Pradeep Kumar (2017) Mechanical Performance of Hybrid Composites Under Cryogenic Temperature and Humid Environment. MTech thesis.

C

Chilakampalli, Sivajyothi (2017) Investigations on the Formability of Incrementally Sheet Formed Al Alloys. MTech thesis.

D

D.S, Aakash (2017) Effect of Strain Path on Texture and Microstructure of Cold Rolled Non-Oriented Electrical Steel. MTech thesis.

Das, Tanmoy (2017) Microstructure and Impression Creep Behaviour of the Bi and Sr Added Squeeze-Cast AZ91 Mg Alloy. MTech thesis.

K

Kumar, Abhishek (2017) Milling Characteristics of Cu and Ni. MTech thesis.

Kumar, Lailesh (2017) Development of Cu and Al-Based Metal Matrix Composites using Graphite Nanoplatelets and Multiwalled Carbon Nanotubes as Reinforcement. PhD thesis.

M

Mallampalli V S S D S , Surya Pavan (2017) Effect of Rolling Temperature on the Evolution of Texture and Microstructure of Ti-6al-4v. MTech thesis.

Markanday, Himanshu (2017) Incremental Forming of CP-Al Sheets Using the Helical Tool Path Strategy. MTech thesis.

Mhetre, Yogesh Shamsundar (2017) Mechanical Performance Evaluation of Woven and Unidirectional GFRP Composite Through Numerical Simulation. MTech thesis.

Mishra, Biswajita (2017) Deformation Behaviour Study of Cu-graphite, Cu-graphite-SiC Metal Matrix Composite Prepared by Powder Metallurgy. MTech thesis.

Mishra, Sankalp (2017) A Molecular Dynamics Study of Sintering Process of FCC and BCC Materials. MTech thesis.

N

Naithani, Nitin (2017) Characterization and Comparison of Lead Free Eutectic Sn-Based Solder Alloys and the Effect of Addition of Ni in Eutectic Sn-0.7Cu Solder Alloy. MTech thesis.

P

Pandey, Gaurav (2017) Electroplating of Magnetic Ni-Fe Alloy Thin Films and Their Characterization. MTech thesis.

Patra, Anshuman (2017) Fabrication of Nano-Y2O3 Dispersed Tungsten Alloys by Mechanical Alloying Followed by Conventional and Spark Plasma Sintering. PhD thesis.

Pattanaik, Ashutosh (2017) Effect of Processing Conditions on Properties of Fly ash-Epoxy Composite. PhD thesis.

Pradhan, Akesh Kumar (2017) Development of Wheel Steels for EOT Crane Application. MTech thesis.

Prusty, Rajesh Kumar (2017) Implication of CNT Fillers on Environmental Durability of GFRP Composites: An Evaluation of Microstructural Features and Mechanical Properties. PhD thesis.

R

R., Harish (2017) Study of Carbonization and Dielectric behaviour of Teak Wood Leaves. MTech thesis.

Rathi, Avinash Singh (2017) Synthesis and Characterization of ZrB2-TiC-Mo Cermets. MTech thesis.

S

Sahani, Pankajini (2017) Fabrication of SiC-B4C–Si and SiC-B4C–Al Cermets by Powder Metallurgy Route. PhD thesis.

Sahoo, Debaraj (2017) Effect of Humid Ageing on the Durability of Functionalized CNT Embedded GFRP Composite. MTech thesis.

Sahoo, Rasmi Ranjan (2017) Comparative Study of Nano ZrO2 and Nano Y2O3 Dispersed Mechanically Alloyed and Conventionally Sintered W-Ni-Nb-Ti. MTech thesis.

Sahoo, Sumanta Kumar (2017) Electrochemically Controlled Synthesis of Few-Layer Graphene Nanosheets and its Evaluation for Applications. PhD thesis.

Shama, Shaik (2017) Comparison of Mechanical Properties of Austenitic Ductile Cast Iron with Ferritic/Pearlitic Ductile Cast Iron. MTech by Research thesis.

Supriya, Akankshya (2017) Studies on Pre-treated Coir Dust Reinforced Polymer Composites. MTech by Research thesis.

V

Vishwakarma, Jaydeep (2017) Characterization and Reduction Behaviors of Iron Ore Pellets for the Application In Iron Making. MTech thesis.

This list was generated on Mon Dec 23 12:33:00 2024 IST.