Browse by Supervisors

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Jump to: A | B | G | J | K | L | M | P | R | S | U
Number of items: 23.

A

Agrawalla, Y (2014) Optimization of machining parameters in a turning operation of austenitic stainless steel to minimize surface roughness and tool wear. BTech thesis.

Agarwal, Ricky (2010) Optimization of Process Parameters of Micro Wire EDM. BTech thesis.

B

Bagal, Dilip (2012) Experimental investigation and modeling micro-drilling operation of aerospace material. BTech thesis.

Bhuyan, Sandip Kumar (2009) Micro-Drilling using Nd-YAG Laser. BTech thesis.

Behera, Bismay Kumar (2011) Parametric optimizartion of microdrilling in aerospace material. BTech thesis.

G

Goudhaman, J (2007) Experimental Investigation of Hot Machining Process of High Manganese Steel using Design of experiments by Taguchi Method. BTech thesis.

Goudhaman, J (2007) Experimental investigation of hot machining process of high manganese steel using SNMG carbide inserts by design of experiments using taguchi method. BTech thesis.

Gupta, Nand Lal (2011) Optimization of Micro-Wire EDM Operation Using Grey Taguchi Method. BTech thesis.

J

Joshi , Mayank (2013) Optimization of Micromillingprocess Using Grey Taguchi Method. BTech thesis.

K

Khandelwal, Samir (2009) Designing a Valveless Micropump. BTech thesis.

L

Lenka, Arunesh (2012) Optimization of hot-machining using taguchi method. BTech thesis.

M

Mishra, Ashutosh (2012) Modelling Of Micro Wire-EDM. BTech thesis.

P

Patnaik, Sibasish and Sachdev, Ankur (2009) Design and Development of Micro Turbine. BTech thesis.

Patra, Sitakant (2010) Design And Modeling of Axial Micro Gas Turbine. BTech thesis.

Patra, S (2010) Design and Modeling of Axial Micro Gas Turbine. BTech thesis.

Pal , Ansuman Dutta (2015) Modelling of Abrasive Flow Machining. BTech thesis.

Pati, Fakir Mohan (2010) Study of Parametric Optimization of Microdrilling Operation using Taguchi Method. BTech thesis.

R

Rajput, Mudit (2010) CFD modelling of hot machining operation. BTech thesis.

Rout, Sarbeswar (2013) Parametric Optimization of Turning Operation on Stainless Steel Using a Carbide Tool. BTech thesis.

S

Sahu, Binaya Kumar (2015) Experimental Investigation of Turning of Austenitic Steel. BTech thesis.

Sutar, R (2014) Multi objective optimization of cutting parameters in turning operation using Taguchi method. BTech thesis.

Sarma, Sushanta (2011) Parametric optimization of turning operation on stainless steel using a carbide tool. BTech thesis.

U

Upadhyay, Avadhesh (2009) Design of a Micropump. BTech thesis.

This list was generated on Thu Oct 3 23:11:12 2024 IST.