Items where Subject is "Engineering and Technology > Ceramic Engnieering > Refractories"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type
Jump to: | A | B | C | D | G | K | M | P | R | S
Number of items at this level: 46.

Das , Swagatika (2013) Preparation of magnesium aluminate spinel by auto combustion route using glycine as fuel and densification study with Cr2O3 addition. BTech thesis.

Mahapatra, Prateik (2013) Development of acid resistant bricks using waste materials. BTech thesis.

Mahato, Subham (2013) Expanded graphite fortified magnesia-carbon refractories : fabrication and properties. MTech thesis.

Parija, Anwesha (2013) Low cement high alumina castables: Effect of distribution coefficients. BTech thesis.

Saigal, Chirag (2013) Reaction Sintered Zircon-Dolomite Compositions for Insulating Refractories. BTech thesis.


Agrawal, Nitesh Kumar (2015) Preparation of Ceramic Porous Body Using Different Volume Concentration of Ball Clay & Wheat Flour. BTech thesis.


Bag, Mousom (2011) Development of Environment Friendly New Generation MgO-C Brick Using Nano Carbon. MTech thesis.

Bhagat, V (2010) Effect of TiO2 as an Additive on the Phase Formation and Densification of Mullite-Zircona Composites. BTech thesis.

Bhowmick, Tynee (2013) A Study on the Development of Refractories for Carbon Black Reactor. MTech thesis.

Bilung, Ankita (2012) Synthesis and Characterization of Cordierite and Mullite composite. BTech thesis.

Bisoyi, Kavita (2012) Study of Zirconia-Mullite system: Effect of SrO addition with alumina content variation. BTech thesis.


Choudhury, Utsarga (2015) Effect of Fly Ash Addition on the Properties of Fired Clay. BTech thesis.


Das, L (2014) Phase evolution behaviour of dolomite-alumina system. BTech thesis.

Das, Rashmi Rekha (2010) Effect of Micron and Nano MgAL2O4 Spinel Addition on the Properties of Magnesia-Carbon Refractories. MTech by Research thesis.

Dash, Smruti Rekha (2009) Development of Improved Tap Hole Clay for Blast Furnace Tap Hole. MTech thesis.


Ghose , Subhojeet (2013) Effect of Filler material replacement on the properties of high alumina conventional castables. BTech thesis.

Goyal , Lucky (2015) Effect of Clay Sand Ratio on the Properties of Clay Bodies Prepared from Local Clays. BTech thesis.

Gugliani, Gaurav Kumar (2013) Study the Effect of Graphite and Nano Carbon on
Corrosion and Spalling resistance of the Zirconia-
Graphite Refractory.
MTech thesis.

Gupta , Pragati (2015) Study and Preparation of High Alumina Insulating Castables. BTech thesis.


Kantha, Shravan Kumar (2012) Study of the microstructure of dolomite doped alumina. BTech thesis.

Kiche rai, Sanjeev (2012) Preparation Of Calcium Aluminate-Spinel Synthetic Aggregates Using Electrostatic Precipitated Dolomite DustAnd Calcined Alumina. BTech thesis.

Kumar, Kumar (2014) Effect of distribution coefficients: silica sol bonded high alumina castable. MTech thesis.

Kumar, Rahul (2011) Development of Low Bulk Density Fireclay Insulation Brick. BTech thesis.

Kumar , Amarjeet (2014) Development of Magnesia Spinel brick using Pre-synthesized and in-situ spinel. BTech thesis.


Meena, Seema N (2011) Effect of Particle Size Distribution on Properties of
Alumina Refractories.
BTech thesis.

Mishra, Anupam (2012) Effect of different high alumina cements on the properties of self flow castable with distribution coefficient 0.21. BTech thesis.

Mishra, Anupam (2012) Effect of different high alumina cements on the properties of self flow castable with distribution coefficient 0.21. BTech thesis.

Mishra, Swagatika (2014) Effect of different bonding agents on sintering behaviour of al2o3-sio2 based mortar. MTech thesis.

Mohapatra, I (2014) Studies on zircon-dolomite system for refractory application. BTech thesis.

Mula, Raju (2015) Synthesis of Graphite/SiC Micro-composites and their influence on MgO-C Refractories. MTech by Research thesis.


Patra, Santosh Kumar (2014) Effect of specially formulated graphite on the thermo mechanical properties of Al2O3-C slide gate plate refractory. BTech thesis.

Paul, Anil (2014) Effect of bonding phases on the properties of Al2O3 based slide gate plates. MTech thesis.

Pradhan, Sai Shankar (2014) Development of alkali free glaze for refractory application application. BTech thesis.

Prasad, Priya (2014) Development of dolomite bricks with positive plc. MTech thesis.


Ram, Deo Karan (2016) Experimental and Computational Studies on Fluidized Bed Biomass Gasifier for Production of Clean Energy. PhD thesis.

Raut, Haraprasad (2012) Mullitization behaviour of alumina enriched clay inpresence of dopant fe2o3. BTech thesis.

Ray, Anuj Kumar (2007) Synthesis and characterization of BaTio3 powder prepared by combustion synthesis process. BTech thesis.

Ray, Saimon (2013) Synthesis of grapite-sic microcomposite
and its effect on the mechanical strength of tempered magnesiacarbon
BTech thesis.

Rout, Rashmi Ranjan (2009) Studies on the Effect of Alumina Aggregates on he Performances of Alumna-Carbon Refractories. MTech thesis.


Sahoo, S (2014) Study on the effect of the effect of different raw materials sources on spinelization and densification of MgO-Al2O3 spinel. BTech thesis.

Samant, Aditya Pratap Dhall (2015) Effect of Deflocculants on High Alumina Low Cement Castables. BTech thesis.

Satapathy, Akash (2011) Effect of different binders on High Alumina Self Flow Castable. BTech thesis.

Saxena, Mandvi (2013) Development of Shotcreting Castable. MTech thesis.

Shrimali, Aditya Prakash (2013) Studies on phase formation in high alumina cement by varying manufacturing parameter and effect of those phases in refractory castable. MTech thesis.

Singh, K (2014) Specially treated graphite fortified alumina- silicon carbide- carbon refractories: fabrication and properties. MTech thesis.

Singh, P (2010) Effect of La2O3 Addition on Sintering of Alumina. BTech thesis.

This list was generated on Thu Apr 27 06:52:39 2017 IST.