Number of items at this level: 56.
Singhal, Aneesh and Kadiyan, Abhimanyu (2013) Location and extent of cohesive zone in the blast furnace as related to the degree of reduction of iron ore pellets/iron ore. BTech thesis.
A
Agarwal, Anup and Saha, Sudhir (2012) Determining the flow characteristics of synthetic
slag and optimizing the slag characteristics. BTech thesis.
Agarwal, Ripu Sudan and Hembram, Sachin (2013) To Study The Reduction And Swelling Behaviour Of Iron Ore Pellets. BTech thesis.
Agrawal, Saurabh (2014) Carbonization of eucalyptus wood and characterization of the properties of chars for application in metallurgy. MTech thesis.
B
Behera, J K and Sahoo, H (2014) Preparation of synthetic slag in the lab resembling industrial blast furnace slag and study of its flow characteristics. BTech thesis.
Behera, J K and Waddar, V N (2010) Study of Kinetics Involved in Oxidation of Nonferrous Metal Sulphides. BTech thesis.
Behera, Kishore Kumar and Behera, Sushil Kumar (2015) Carbonization of Non-Coking Coal. BTech thesis.
C
Chandran, Ramkumar (2019) Electrochemical Deposition of Cu-Based Chalcopyrite (CISe/CIGSe) Thin Films for Photovoltaic Applications. PhD thesis.
Choudhury, Satyam (2015) Density Functional Theory Based Investigation of 1-Butyl-3-Methylidazolium as a Potential Methane Hydrate Inhibitor. BTech thesis.
D
Das, Biro Kishore and Mallick, Debaprasan (2015) Briquetting of Iron Bearing Materials. BTech thesis.
Dash, Supratik and Mohanty, Nachiketa (2012) Optimization of Flow Characteristics of Blast Furnace Slag. BTech thesis.
Dhurandhar, Vikas (2016) Statistical Model for Estimating the Flow Characteristics of Blast Furnace Slag. MTech thesis.
Dinkar, V C (2014) Viscous properties of synthetic high alumina
blast furnace slag. MTech thesis.
E
Eshwar, Punit Kumar (2015) Studies of The Physical Properties and Reduction-Swelling Behavior of Fired Haematite Iron Ore Pellets. MTech thesis.
G
Gangineni, Pavan Kumar (2022) Mechanical Behavior of Graphene Nanofiller Grafted Carbon Fiber Reinforced Polymer Composites. PhD thesis.
Goenka, Mahesh and Naik, Abhishek (2013) Effect of size distribution and water content on properties of iron ore pellets. BTech thesis.
K
Kabijeet, K and Kumar, A (2014) Study of reduction behavior of iron ore lumps by coal. BTech thesis.
Khandelwal, Deepak and Sanapala, Vinod (2015) Measurement of Viscosity of High Alumina Blast Furnace Slags by Statistical Approach. BTech thesis.
Kishnani , Vinay (2015) Evaluation of Blast Furnace Slag Procured from Adhunik Metallics Limited With Respect to Its Flow Characteristics. MTech thesis.
Kumar, Ashok (2016) Effect of Al2O3 and MgO on Flow Characerstics of Blast Furnace Slag. MTech thesis.
Kumar, Avinash and Kalsi, Satwinder singh (2010) "Reduction kinetics of iron ore pellets made by addition of -100# size fines in conventional pellets". BTech thesis.
Kumar, Dhirendra (2015) Optimization of Blast Furnace Parameters using Artificial Neural Network. MTech thesis.
Kumar, Rahul (2015) Computational Fluid Dynamic (CFD) Simulation for Continuous Casting Process of Steels. MTech thesis.
Kumar, Rakesh (2014) Carbonization study of non coking coals and characterisation of their properties for application in sponge iron making. MTech thesis.
Kumari, Vinita (2015) Mathematical Modelling of Basic Oxygen Steel Making Process. MTech thesis.
L
Lenka, Ramyaranjan (2016) Characterization of The Properties of Some Biomass Species and Estimation of Their Power Generation Potentials. MTech thesis.
M
Meraj, Md. (2019) Molecular Dynamics Simulation Based Study for Creep Deformation Behaviour of Nanocrystalline Nickel and Nickel-Zirconium Alloys. PhD thesis.
Mishra, Sushree Sefali (2022) Role of Y2O3 and Al2O3 Additive during Fabrication of Si3N4-Mo, Si3N4-Mo-Si and Si3N4 Mo-Al Cermets by Powder Metallurgy. PhD thesis.
Mohapatra, Binayak (2009) Study of Reduction Behaviour Of Iron Ore Lumps. BTech thesis.
N
Nahak, Biswanath (2015) Reduction of Iron Ore Pellets. BTech thesis.
Nath, Subhasisa (2009) Study of Reduction Kinetics of Iron Ore Pellets by Noncokingcoal. MTech thesis.
Nayak, Deepak and Mahapatra, Himansu Shekhar and Kumar, Navin (2010) An attempt at optimizing the flow characteristics of blast furnace slag by investigation with synthetic slag prepared in the laboratory using pure oxides. BTech thesis.
Nayak, Jagadish (2016) Dynamic Process Modeling of Stainless Steel Making Through AOD Converter. MTech thesis.
P
Panda, Deepankar (2016) Development of Al-Fe3Al Composites by Powder Metallurgy Route. MTech by Research thesis.
Panigrahi, S and Sahoo, B K (2014) Study on flow characteristics of primary blast furnace slag. BTech thesis.
Parhi, Bikash Ranjan (2018) Reduction of Bauxite through Hydrogen: Future Method of Extraction of Aluminium. PhD thesis.
Pati, Rashmi Ranjan and M, Vinay (2009) Reduction Behaviour of Iron Ore Pellets. BTech thesis.
Patnaik, Pallabi and Dumpawar, Shivani (2010) An attempt at optimizing the flow characteristics of blast furnace slag by Investigation with slag obtained from blast furnace of Rourkela steel plant, SAIL. BTech thesis.
Patra, Deepak and V, Sharath (2011) Effect of Firing Temperature and time on swelling behavior of reduced iron ore pellets. BTech thesis.
Patra, Dharanidhar (2009) Study of Reduction Behaviour Of Iron Ore Lumps. BTech thesis.
Piprani, Vikas and Samal, Prachi and Sahu, Vaneshwar (2009) Fatigue Life Estimation of Pre-corroded Aluminium Alloy. BTech thesis.
Pragnya, P and Sarma, S (2014) Measurement of synthetic high alumina blast furnace
slags in the laboratory. BTech thesis.
R
R., Harish (2017) Study of Carbonization and Dielectric behaviour of Teak Wood Leaves. MTech thesis.
Raj, Kundan and Sood, Sidharth and Panda, Amlan Prateek and Panigrahi, Sridhar Kumar and Pabba, Abhimanyu (2011) An attempt at optimizing the flow characteristics of blast furnace slag by investigation of synthetic slags prepared in the laboratory using pure oxides. BTech thesis.
Ravi, Kreethi (2019) Ratcheting Behaviour of 42CrMo4 Steel under Different Heat Treatment Conditions. PhD thesis.
S
Sahu, Manish (2014) An Investigation on Treatment of Bauxite through Hydrogen Plasma. MTech thesis.
Sahu, Ravindra Kumar (2016) Characterization of the Properties of Non–Coking Coals and their CHARS. MTech thesis.
Samal, S K (2014) Studies on plasma processing of blue dust. MTech thesis.
Sengar, Vasudev Singh (2015) Carbonization Study of Non-Coking Coals and Characterization of Their Properties for Application in DRI Production. MTech thesis.
Singh, Priti (2023) A Detailed Investigation on the Phase Transformation Mechanism During Electrodeposition of Cu(In,Ga)Se2 Films. PhD thesis.
Singhal, Ankit (2015) Flow Characteristics of Indian Blast Furnace Slag. MTech thesis.
Swain, Biswajit Kumar (2022) Mechanical, Tribological and Hydrophobic Properties Evaluation of Atmospheric Plasma Sprayed NiTi Coating. PhD thesis.
Swain , Biswajit Kumar (2016) Plasma Smelting of Iron Ore Fines Having High Silica Content. MTech thesis.
T
Trivedi, A and Seth, S (2014) Reduction behaviour of fired iron ore pellets. BTech thesis.
V
Verma, Indradev (2015) Modeling of High Alumina Blast Furnace Slag. MTech thesis.
Vinjamuri, Raviteja (2022) Roles of Uniaxial, Shear and Cyclic Loading on the Microstructure and Texture Evolution during Plastic Deformation of Ti6Al4V Alloy. PhD thesis.
This list was generated on Wed Jul 17 17:40:11 2024 IST.
