Items where Subject is "Engineering and Technology > Metallurgical and Materials Science > Composites > Metal-Matrix"
Group by: Creators | Item Type
Number of items at this level: 32.
Gupta, Sujasha and Gupta, Savita (2013) Effect of thermal shock and loading rate on the microstructure and properties of Cu/Al2O3 composites. BTech thesis.
Mohapatra, Shanta (2013) Processing, Microstructure and Properties of Hybrid
Annam, Dinesh Kumar (2018) Microstructure and Impression Creep Behaviour of AZ91 Alloy with Trace Additions of Sb and Sr. MTech thesis.
Behera, Biplab (2018) Selection of vacuum pressure and vacuum implication
Behera, Saswat Kumar and Prajapati , Sonu Kumar (2015) Development of Tungsten Based Alloy Through Nano Structuring. BTech thesis.
Bhuyan, Pallabi (2016) Development of Cu-Based Metal Matrix Composites Using Fe3Al as Reinforcement by Powder Metallurgy Route. MTech thesis.
Chaturvedi, Abhishek (2013) Low cycle fatigue behaviour of AISI 308 stainless steel weld metal. MTech thesis.
Das, Pranay (2016) Development and Characterization of Zn-Al2O3 Composite. MTech thesis.
Dewangan, Gainendra Kumar (2018) Fatigue Crack-macrocrack Interaction in 316 Stainless Steel Sheet. MTech thesis.
Kumar, Avinash and Singh, Satyajeet (2011) Wear Property of Metal Matrix Composite. BTech thesis.
Kumar, Sidheshwar and Singh, Bhagirathi (2011) Study on silicon carbide produced From rice husk as a reinforcing agent. BTech thesis.
Maity, Sabarna and Sabarna, Sambal Shashank (2013) Synthesis and Characterization of Zn-Al2O3Composite. BTech thesis.
Majhi, Jichil (2022) Microstructural Correlation of Creep, Tensile and Corrosion Behaviour of AZ91 Magnesium Alloy with Bi, Ca and Sr Additions. PhD thesis.
Meher, Arabinda (2015) Synthesis and Characterization of Cu-graphite-SiC Hybrid Metal Matrix Composite Prepared by Powder Metallurgy Route. MTech thesis.
Mohanty, Sibabrata and Mohanty, Abhijeet (2012) Synthesis & Characterization of Copper-Graphite Metal Matrix Composite by Powder Metallurgy Route. BTech thesis.
Moharana, Gyanti Prakash (2011) Effect of catalyst on the synthesis of SiC from rice husk. MTech thesis.
Mozumder, Yahya Hoque (2015) Influence of Intercritical Austenitizing Temperature, Quenching Media and Tempering Temperature on Mechanical Properties and Wear Behavior of Ductile Iron with Dual Matrix Structure. MTech by Research thesis.
Nag, Saurendra and Talluri, Neeradh (2013) Processing, Microstructure and Properties of Micro and Nano Alumina Reinforced Aluminium Composites. BTech thesis.
Pani, Sanjibani (2008) Some Aspects of Performance Appraisal of Aluminum - Silicon Carbide Particulate (SiCp) Metal Matrix Composite. MTech by Research thesis.
Patidar, Divyank (2018) Estimation of Power Generation Potential of Agricultural Based Biomass Residues and Coal–Biomass Mixed pellets. MTech thesis.
Prasad, Naresh (2006) Development and Characterization of Metal Matrix Composite Using Red Mud an Industrial Waste for Wear Resistant Applications. PhD thesis.
Ray, Nigamananda and Kerketta, Dilip Kumar (2010) Some studies on aluminium matrix in-situ composites produced by stir casting method. BTech thesis.
Sahani, Pankajini (2010) Synthesis and Characterizations of Copperbased Nanostructures Developed by Mechanical Milling. MTech thesis.
Sahoo, Aishwarya Rani (2015) Synthesis and Characterization of α-Al2O3 by Sol-Gel Process and Development of Zn-Al2O3 Composites by Powder Metallurgy Route. MTech thesis.
Sahoo, Alok Ranjan (2015) Study of Wear, Aging and Corrosion Behaviour of Aluminium-3%Magnesium-10%Silicon Carbide Composite. MTech thesis.
Sahu, Sushanta Kumar (2009) An appraisal of Characteristic Mechanical Properties of Aluminium 6061 alloy – Silicon Carbide (SiCp) Metal Matrix Composite (MMC) exposed to different thermal conditions. MTech thesis.
Samal, Chandana Priyadarshini (2012) Microstructure and mechanical property study of cu-graphite metal matrix composite prepared by powder metallurgy route. MTech thesis.
Singh, Akhilesh (2010) Studies on Aluminum – Iron ore in-situ Particulate Composite. MTech thesis.
Venumbaka , Sarat Chandra (2015) Simulation and Experimental Studies of Al Metal Matrix Composites Reinforced With Fe3Al Intermetallic. MTech thesis.
Verma, Sarthak (2018) Milling Characteristics of BCC, FCC and HCP Metals. MTech thesis.
Vishwakarma, Jaydeep (2017) Characterization and Reduction Behaviors of Iron Ore Pellets for the Application In Iron Making. MTech thesis.