Number of items at this level: 48.
Gupta, Sujasha and Gupta, Savita (2013) Effect of thermal shock and loading rate on the microstructure and properties of Cu/Al2O3 composites. BTech thesis.
A
Aggarwal, Tarun (2009) Sliding Wear Behavior of Glass Fibre Reinforced 
Filled Epoxy Resin Composite. BTech thesis.
B
Behera, Akhya Kumar (2020) Electro-Formation of Cu-Graphene Composites and Its Property Evaluation. PhD thesis.
Bhardwaj, Hem Shruti and Sahoo, Paramita Sahoo (2015) Environmental Study of Nano-Filler Embedded Fiber Reinforced Polymer Composite. BTech thesis.
Bhatnagar, Shrey (2017) Structure Property Correlation of Cu-Al-V2O5 Composite Coating Prepared by Electro-Codeposition from Al-V2O5 Dispersed Bath. MTech thesis.
C
Chandran, Ramkumar (2019) Electrochemical Deposition of Cu-Based Chalcopyrite (CISe/CIGSe) Thin Films for Photovoltaic Applications. PhD thesis.
D
Das, Chandra Bhanu (2009) Waste Silk Yarn Reinforced Epoxy Laminate. BTech thesis.
Das, Pranay (2016) Development and Characterization of Zn-Al2O3 Composite. MTech thesis.
G
Ganguly, Sourav (2020) Creep, Tensile, Wear and Corrosion Behaviour of SiC Nanoparticles Reinforced Squeeze-Cast AZ91-Ca-Sb Magnesium Alloy. PhD thesis.
Gope, Rahul (2016) Synthesis and Characterization of ZrB2-WC-Si Cermets. MTech thesis.
K
Khan, Irshad Ahamd (2009) Prediction of elastic properties of 2D orthogonal plain weave fabric composites. MTech thesis.
Kumar, Devalingam Santhosh (2015) New Generation Fibre Reinforced Polymer Composites for Low and Cryogenic Temperature Applications. MTech thesis.
Kumar, Nitish and Agarwal, Rishabh (2015) Comparison of Microstructures and Properties of Ae42 Magnesium Alloy and Its Composites. BTech thesis.
Kumbhar, Yudhistir (2014) Microstructure and properties of AE42 magnesium alloy and its composite. BTech thesis.
M
Mahato, Kishore Kumar (2020) Environmental Durability of Multiscale Glass Fiber/Epoxy Composites: An Assessment On Mechanical Properties and Microstructural Evaluation. PhD thesis.
Meena, Vishvendra and Saroya, Avtar (2011) Study of Mechanical Properties of Hybrid Natural Fiber Composite. BTech thesis.
Meher, Arabinda (2015) Synthesis and Characterization of Cu-graphite-SiC Hybrid Metal Matrix Composite Prepared by Powder Metallurgy Route. MTech thesis.
Mhetre, Yogesh Shamsundar (2017) Mechanical Performance Evaluation of Woven and Unidirectional GFRP Composite Through Numerical Simulation. MTech thesis.
Mishra, Biswajita (2017) Deformation Behaviour Study of Cu-graphite, Cu-graphite-SiC Metal Matrix Composite Prepared by Powder Metallurgy. MTech thesis.
Mohanty, Sarat Chandra (2016) Development of CNT Modified GFRP Composite and Assessment of Its Elevated Temperature Mechanical Performance. MTech thesis.
Mohanty, Sibabrata and Mohanty, Abhijeet (2012) Synthesis & Characterization of Copper-Graphite Metal Matrix Composite by Powder Metallurgy Route. BTech thesis.
Mohapatra , Swopnil and Kanungo, Debesh (2015) Studies on Tribological Behaviour and Thermal Properties of Marble Powder-Epoxy Composites. BTech thesis.
N
Nag, Saurendra and Talluri, Neeradh (2013) Processing, Microstructure and Properties of Micro and Nano Alumina Reinforced Aluminium Composites. BTech thesis.
Nalla, Rakesh (2015) Molecular Dynamics Studies on the Prediction of Interface Strength of Cu(Metal)-Cu50Zr50(Metallic glass) Metal Matrix Composites. MTech thesis.
Nayak, Anil Kumar and Dash, Anuj (2014) Effect of quenching media on properties of aluminium-alumina metal matrix composite. BTech thesis.
Nayak, B B (2006) Magnetic Nanocomposite Material. PhD thesis.
Nayak, Nadia Bihari (2010) Fabrication & Tribological Behaviour Of Feather Reinforced Polymer Composites. MTech by Research thesis.
P
Pani, Sanjibani (2008) Some Aspects of Performance Appraisal of Aluminum - Silicon Carbide Particulate (SiCp) Metal Matrix Composite. MTech by Research thesis.
Parihar, Jyoti Singh (2013) Wear behavior and electrical conductivity study of Cu-graphite MMC prepared by powder metallurgy route. MTech thesis.
Prusty, Debasmini (2015) Processing and Property Evaluation of Iron Oxide Powder Reinforced Polymer Composite. MTech thesis.
Prusty, Rajesh Kumar (2017) Implication of CNT Fillers on Environmental Durability of GFRP Composites: An Evaluation of Microstructural Features and Mechanical Properties. PhD thesis.
R
Rathi, Avinash Singh (2017) Synthesis and Characterization of ZrB2-TiC-Mo Cermets. MTech thesis.
Ray, Subhrajit (2009) Processing and Characterization of Titania Filled Epoxy - Glass Fiber Composites. MTech thesis.
S
Sahani, Pankajini (2017) Fabrication of SiC-B4C–Si and SiC-B4C–Al Cermets by Powder Metallurgy Route. PhD thesis.
Sahoo, Aishwarya Rani (2015) Synthesis and Characterization of α-Al2O3 by Sol-Gel Process and Development of Zn-Al2O3 Composites by Powder Metallurgy Route. MTech thesis.
Sahoo, Alok Ranjan (2015) Study of Wear, Aging and Corrosion Behaviour of Aluminium-3%Magnesium-10%Silicon Carbide Composite. MTech thesis.
Sahu, Shivangi and Mishra, Soumya (2014) Effects of Thermal Spikes on Hygrothermally and Ultraviolet Radiation Treated Fiber Reinforced Polymer Composites. BTech thesis.
Samal, Sumant Kumar (2021) Processing Ferroalloys from Lean Ore and Fines using Thermal Plasma. PhD thesis.
Samantaray, Rajashree (2021) Sequestration of Activated Carbon from a Wasteland Weed and its Application in High Performance Supercapacitor-based Energy-Storage System. PhD thesis.
Shukla, Meet Jayesh (2015) Elevated Temperature Performance of Hybrid Polymer Composites. MTech thesis.
Singh, Bhanu Pratap (2016) Mechanical Performance Evaluation of Carbon Nanotube Reinforced Polymer Nanocomposites at above Ambient Temperature Environments. MTech thesis.
Srihar, Nagadamudi and Kunchur , Vishnu (2014) Design and Optimization of Paper Bags. BTech thesis.
Srivastava, Manu (2009) Parametric Appraisal of Erosion Process in Polyster Glass Fiber Composites. BTech thesis.
Sukumaran, Suvin (2014) Effects of quenching media on the mechanical properties of Al-Al2O3 metal matrix composite. MTech thesis.
Supriya, Akankshya (2017) Studies on Pre-treated Coir Dust Reinforced Polymer Composites. MTech by Research thesis.
T
Tulip, Sudhanshu Sekhar and Shekhar, Raj (2013) An Assessment of Mechanical Behavior on High Temperature and Different Volume Fraction of Glass Fiber Reinforced Polymer Composites. BTech thesis.
V
Vedant, Rajan (2015) Development of ZrB2-B4C-Mo Ceramic Matrix Composite for High Temperature Applications. MTech thesis.
Verma, Dipanshu (2015) Development and Characterization of Al-E Glass Fiber Composites. MTech thesis.
This list was generated on Sat Nov 9 03:42:52 2024 IST.
