Items where Subject is "Engineering and Technology > Metallurgical and Materials Science > Composites > FRP"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type
Jump to: A | B | C | D | J | K | M | P | S | U
Number of items at this level: 31.


Agrawalla, Abhisek and Keshri, Namrata (2015) Durability Assessment of Multiwalled Carbon-Nanotubes Modified Advanced Fibrous Polymeric Composite in Different Marine Environment. BTech thesis.


Banerjee, Shubhonil and Patel, Dipak Kumar (2008) A Comparative Study of Effects on Characteristic Properties of FRP Composites When Exposed to Distilled Water, Nacl-Water Solution and Sea Water Separately. BTech thesis.

Bansal Darji, Vinaykumar (2017) Finite Element Analysis for Adhesive Bonding Strength of Steel and FRP Composite Joint. MTech thesis.

Biswal, Pradeep Kumar (2017) Mechanical Performance of Hybrid Composites Under Cryogenic Temperature and Humid Environment. MTech thesis.


Chakraverty, Ananta Prasad (2015) Some Aspects of Evaluation of GFRP Composite Depending on Its End Use. PhD thesis.

Chakraverty, Ananta Prasad (2010) Response of E-Glass/Epoxy Composite to Up and Down-Thermal Shocks under the Influence of Varying Environmental Condition. MTech by Research thesis.


Dalai, Renu Prava (2010) An Assessment of Mechanical Behavior of Fibrous Polymeric Composites Under Different Loading Speeds at Above- And Sub-Ambient Temperatures. MTech thesis.

Das, Snehamayee (2012) Fabrication and characterization of raw and bleached
treatment coir fiber Reinforced polymer composite.
MSc thesis.

Dash, Nishikant (2009) Strengthening of Reinforced concrete Beams using Glass Fiber Reinforced Polymer Composites. MTech thesis.

Deb, Susmit Kumar (2009) Reavling of Failure Modes in FRP Composites. BTech thesis.


Jha, Alok Kumar (2009) Mechanical Characterization and Solid Particle Erosion Response of Particulate Filled Jute-Epoxy Composites. MTech thesis.

Jha, Prachi Swatantrata and Mitra, Swati (2011) Impact and Implication of Thermal Conditioning on the Mechanical behavior of FRP Composites. BTech thesis.


K, S and Panda, G and Kumari, M (2010) Damage and Degradation Study of FRP Composites. BTech thesis.

K , Bijesh (2010) Effect of fiber loading on mechanical behavior of chopped glass fiber reinforced polymer composites. BTech thesis.

Kumar, Devalingam Santhosh (2015) New Generation Fibre Reinforced Polymer Composites for Low and Cryogenic Temperature Applications. MTech thesis.


Mahato, K K (2014) An assessment of mechanical behavior of environmentally conditioned fibre reinforced polymer composites. MTech thesis.

Maliya, vinod kumar and Naik, preetam kumar (2011) Effect of defects on mechanical properties of composite. BTech thesis.

Mallick, Sushree Sangita (2012) Fabrication and characterisation of natural fibre reinforced polymer composites. MSc thesis.

Mhetre, Yogesh Shamsundar (2017) Mechanical Performance Evaluation of Woven and Unidirectional GFRP Composite Through Numerical Simulation. MTech thesis.

Mishra, Gyanaranjan and Baske, Chaitanya Prasad (2009) Characterization of Hybrid FRP composites with Hygrothermal Exposure Under Varied Ambient Conditions. BTech thesis.

Mohapatra, Chiranjeevee (2009) Revealing of Failure Modes of FRP Composites by Microscopic Technique. BTech thesis.


Panda, Prabhash Kumar and Nayak, Rakesh (2011) Effect of Thermal and Microwave Treatment on Low Temperature Mechanical Property of Glass Fiber Reinforced Polymer Composite: An Experimental Exploration. BTech thesis.

Panigrahi, Ajit (2009) Characterization of Hybrid FRP Composite with Hydrothermal Exposure Under Varied Ambient Conditions. BTech thesis.

Pradhan, Gaurav and John, David (2009) Erosion Wear Behaviour of Bio-Waste Reinforced Polymer Composites. BTech thesis.

Priyadarshi, Ashutosh A and Das, Kuntal (2008) Interface Assessment of FRP by Alternating DSC and FTIR Imaging Techniques. BTech thesis.


Sahoo, Debaraj (2017) Effect of Humid Ageing on the Durability of Functionalized CNT Embedded GFRP Composite. MTech thesis.

Samal, Nirjharini (2012) Fabrication and characterization of Acetone Treated Natural Fibre Reinforced Polymer Composites. MSc thesis.

Sethi, Sanghamitra (2010) Characterization of interfacial integrity and its implication on mechanical behavior of FRP composites. MTech thesis.

Sharma, Neeti (2007) Assessment of small interactions and structural gradient at the interface of FRP composites by FTIR-imaging and DSC techniques. MTech thesis.

Shukla, Meet Jayesh (2015) Elevated Temperature Performance of Hybrid Polymer Composites. MTech thesis.


Upadhyay, Paritosh and Patro, Subrat Kumar (2008) Failure Characterization of FRP by Scanning Electron Microscope Technique. BTech thesis.

This list was generated on Tue Apr 16 12:38:16 2024 IST.