Items where Division is " Engineering and Technology > Department of Chemical Engineering" and Year is 2013

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Jump to: | . | A | B | C | D | J | K | M | N | P | R | S | T | V | Y
Number of items: 63.

Bal , Pramod Kumar (2013) Production of 500 Tons per Day of Pure Hydrogen Gas from Refinery Off-Gas Stream. BTech thesis.

Behera, Sauvagya (2013) Hydrodyamic study of newtonian fluid flow over a sphere using CFD models. BTech thesis.

Biswas , Ritam (2013) Removal of methylene blue dye using oil cake (karanja). BTech thesis.

Das , Manas Ranjan (2013) Rheological behavior of clay water slurry in the presence of cationic surfactants and Electrolytes. BTech thesis.

Dhir, Satarupa (2013) Study of flow of granular solids through horizontal orifices. BTech thesis.

Dhir, Satarupa (2013) Study of flow of granular solids through horizontal orifices. BTech thesis.

Kattamuri , Venkatesh (2013) Process Flow Sheet Simulation of Hydrogen Production Using Sulfur-Iodine Cycle. BTech thesis.

Kedia, Ankit (2013) Effect of Electrolyte on Adsorption of Dye at Clay – water Interface. BTech thesis.

Khan, Alisher (2013) Parametric studies on synthesis of Di-benzyl sulfide using H2S and Aliquat-336. BTech thesis.

Kumar, Akash (2013) Kinetics studies in synthesis of dibenzyl sulphide in liquid-liquid-solid mode. BTech thesis.

Lata, Manju (2013) Biodegradation of phenol by bacterial strain isolated from paper sludge. BTech thesis.

Mahapatra , Siddharth (2013) Self-assembly of colloidal nanoparticles from sessile evaporating drops. BTech thesis.

Mishra , Siddharth (2013) Behaviour of Three Phase Fluidized Beds Using Wood Particles. BTech thesis.

Mohanta , Yayati Kishore (2013) Hydrodynamics stydy of conventionl (cylindrical) fluidized bed at ambient temperature. BTech thesis.

Mohapatra, Sowhm Swain (2013) Production of Bio-fuel & Bio-char from Sugarcane Bagasse by Thermal Pyrolysis. MTech thesis.

Omar, Rohit (2013) Self-Assembly of Sodium Carboxymethyl Cellulose on Glass
Surface from Evaporating Drops.
MTech thesis.

Pare , Aakanksha (2013) Hydrodynamics of three phase fluidized bed using low density particles. MTech thesis.

Ravi , Prasanna Rao (2013) Numerical Study of Crystallization Process Using CFD Tools. MTech thesis.

Reddy , Kotha Pruthvi (2013) Process Fault Analysis Using Signed Directed Graphs and Fuzzy Logic. BTech thesis.

Seal , Suprabhat (2013) Pyrolysis of cotton seed and characterization of the liquid product. BTech thesis.

Singh , Gaurav (2013) Implementation of Traditional and Non-Traditional Optimization Algorithms for Heat Exchanger Design. BTech thesis.

Soni, Ajeet Kumar (2013) Isolation and characterization of biosurfactant producing bacteria from oil contaminated soil. BTech thesis.


., Shivani (2013) Vapor-liquid equilibrium and thermodynamic property estimation of CO2 - alkanolamines - water system using molecular modeling and validation with experiments. MTech by Research thesis.


Agarwal , Kumud (2013) Removal of Dyes Using Conventional and Advanced Adsorbents Advanced Adsorbents. BTech thesis.

Ansari, Mazhar Husain (2013) Simulation of effects of various parameters in solid waste gasification in a fixed bed reactor. BTech thesis.


Bakhsh, Anis (2013) Modeling and simulation of forced circulation evaporation crystallizer. MTech by Research thesis.

Bandpatte, Sagar Chandu (2013) Application of LQR and MPC on Distillation and Batch Crystallization Process. MTech thesis.

Behera, Amulya Kumar (2013) Study On the Effect Of Various Catalysts For Biomass Gasification Process. BTech thesis.

Behura, Satya Soumendra (2013) Study of Heat Transfer Enhancement in Microchannels using
Computational Fluid Dynamics (CFD) Models.
BTech thesis.

Bhatia, Jasmeet Singh (2013) Performance Analysis of Circulating Fludized Bed Biomass Gasifier: Aspen Simultaion. BTech thesis.

Bochalya, Rameshwar kumar (2013) Analysis of synthesis gas produced from biomass gasification. BTech thesis.


Chaudhuri, Rajib Ghosh (2013) Studies on Sulfur Templated Core/Shell and Hollow Nanoparticles Synthesized in Aqueous Micellar Media. PhD thesis.


Dhanibabu, Talakala (2013) CFD Analysis for Heat Transfer Augmentation Inside Plain and Finned Circular Tubes with Twisted Tape Inserts. MTech thesis.


Jain , Garima (2013) Removal of copper and zinc from wastewater using chitosan. MTech thesis.


Kumar, Gaurav (2013) Vapour-liquid Equilibrium of Carbon Dioxide in Newly Proposed Blends of Alkanolamines. PhD thesis.

Kumar , Akash (2013) Adsorptive removal of Rhodamine B (dye) using low cost adsorbents. MTech thesis.


Mahaling, Kumuda Ranjan (2013) Synthesis of dibenzyl sulphide by using PEG-6000 as a green catalyst. BTech thesis.

Mahamallik, Amlan (2013) Synthesis and Characterization of Porous Activated Carbon from a new Precursor(karanja oil cake). BTech thesis.

Maharana, Abhishek (2013) An Integrated Design of Hydrothermal Liquefaction and Biogas Plant For The Conversion of Feedstock (Biomass) To Biofuel. BTech thesis.

Majhi, Bhabesh (2013) Two phase fluidization of coarse materials in a tapered fluidized bed. BTech thesis.

Mishra , Debesh (2013) Preparation of Soap Using Different Types of Oils and Exploring its Properties. BTech thesis.


Nagarjun, S. (2013) Kinetics of Reaction of Benzyl Chloride with H2S-Rich Aqueous Monoethanolamine Under Liquid-Liquid-Liquid Phase-Transfer Catalysis. MTech thesis.


Panda, Siddhant (2013) The Determination of Minimum Bubbling Velocity, Minimum
Fluidization velocity and Fluidization Index of Fine Powders
using Gas-Solid Tapered Beds.
BTech thesis.

Pandey, Meenakshee (2013) Lipase catalysed hydrolysis of non-conventional oil resources: kinetics & optimization study. MTech by Research thesis.

Pandey, Saurabh (2013) Theoretical Analysis of Mixed Gas Adsorption Behaviour of
(CH4+CO2) on Metal Organic Framework (MOF).
BTech thesis.

Parma , Sandeep (2013) Preparation and Characterization of Ceramic Microfiltration Membrane using Red Mud as cost effective resource. MTech thesis.

Patra, Shalini (2013) CFD analysis of heat transfer augmentation for flow through a tube using wire coil inserts. BTech thesis.

Patro, V.Balaji (2013) Bio-transformation of natural oil into industrially useful product (Lauric acid). MTech by Research thesis.


Ranjan , Debesh Kumar (2013) Preparation of Ceramic Membranes for Effluent Treatment. BTech thesis.

Rout , Tanmaya Kumar (2013) Pyrolysis of coconut shell. MTech thesis.


Sabde , ShrirangVishwanth (2013) Management of Industrial Solid Waste by Utilizing as an Adsorbent for Methylene Blue Removal. MTech thesis.

Sahu, Samir Kumar (2013) Experimental Studies on Heat Transfer Augmentation using Triangular Wavy Tape (TWT) As Inserts For Tube Side Flow Of Liquids. BTech thesis.

Samal, Anil Kumar (2013) Shell and Tube Heat Exchanger Design Using CFD Tools. BTech thesis.

Sandha, Jasobanta (2013) Experimental studies on hydrodynamic behaviour of flow through a tube with Triangular Wavy Tapes (TWT). BTech thesis.

Sethi , Siba Sankar (2013) production of bio fuel from pyrolysis of Jatropha seed. BTech thesis.

Sethy , Amit (2013) Preparation of oxalic acid from molasses. BTech thesis.

Shailaja, N. (2013) Hydrodynamic study on inverse fluidization: A CFD analysis. MTech thesis.

Singh , Anil Kumar (2013) Classification of Flow Regimes Using Linear Discriminant Analysis (LDA) and Support Vector Machine (SVM). MTech thesis.

Srikrishnan , A (2013) Simulation of 2D Riser Regenerator. MTech thesis.

Srinivas , Thadela (2013) Effect of Process Parameters on Conversion and Selectivity for the Synthesis of Dibenzyl Sulfide Using Hydrogen Sulfide and Solid Reusable Tri-Phase Transfer Catalyst. MTech thesis.


Tripathy, Rajesh (2013) Production of Hydrogen Gas from Biomass Wastes Using Fluidized Bed Gasifier. MTech by Research thesis.


Vyankatesh, Sakhare Rahul (2013) Catalytic pyrolysis of castor seed into liquid hydrocarbon transportation fuels. BTech thesis.


Yadav , Sunil (2013) Energy from municipal waste using a gasifier. BTech thesis.

This list was generated on Mon Sep 25 23:09:05 2017 IST.