Number of items at this level: 35.
Ranjan , Atul and Ranjan, Manindra (2013) Effect of Isothermal Annealing Temperature and Cooling Rate on Mechanical Properties of Ductile Iron. BTech thesis.
A
A., Usha Kiran (2017) Study on Flow Characteristics of Synthetic Slag. MTech thesis.
B
Behera, Gourahari and Sohala, Soumya Ranjan (2012) Effect of copper on the properties of austempered ductile iron castings. BTech thesis.
Behera, Litu (2014) Mechanical property investigation of hardened and tempered ductile iron. MTech thesis.
Behera, Ranjan Kumar (2016) Development Of Spheroidal Graphite Cast Iron For Nuclear Fuel Transport Cask. PhD thesis.
Bisht, Anita (2009) Effect of Heat Treatment Procedures on Microstructure and Mechanical Properties of Nodular Iron. MTech thesis.
Bramaramba, Ventrapragada (2024) Effect of Different Heat Treatment Procedures on Mechanical Properties and Wear Behavior of Ductile Cast Iron. PhD thesis.
D
Das, Amar Kumar (2012) Effect of Processing Parameters on Properties of Alloyed Austempered Ductile Iron. MTech by Research thesis.
Dasari, Srinivasu (2023) Influence of Temperature on Mechanical Performance of Glass Fiber/epoxy Composite with Continuous and Discontinuous Secondary Carbon Fiber Reinforcement. PhD thesis.
J
Jaiswal, Amit and Shekhar, Sudhanshu (2008) Heat Treatment of S.G Cast Iron. BTech thesis.
K
Kotta, Anand Babu (2019) Studies on the Chemical, Physical and Mechanical Properties of Different Iron Ore Pellets Prepared under Different Conditions. PhD thesis.
Kumar, Ravindra (2015) Effect of Tempering Temperature and Time on Strength and Hardness of Ductile Cast Iron. MTech thesis.
M
Majhi , Pabitra Kumar and Kumar, Santosh (2014) Effect of tempering temperature & time on impact properties and microstucture of spheroidal graphite iron. BTech thesis.
Mittal, Ranjan and Nanda, Sunit (2010) Property enhancement of spheroidal graphite cast iron by heat treatment. BTech thesis.
Mohanty, Manoja Kumar (2019) Reducibility Study of Briquettes Made from Iron Bearing Metallurgical Wastes for use in Iron Blast Furnace. PhD thesis.
Mohanty, Sabyasachi (2016) Effect of Micro Constituents on Wear Properties of Alloyed Ductile Iron. MTech thesis.
Mozumder, Yahya Hoque (2015) Influence of Intercritical Austenitizing Temperature, Quenching Media and Tempering Temperature on Mechanical Properties and Wear Behavior of Ductile Iron with Dual Matrix Structure. MTech by Research thesis.
P
Panda, Ranjit Kumar (2011) Effect of copper on austempering behavior of ductile iron. MTech thesis.
Patra, Sanjeev Kumar (2016) Characterization of Dual Matrix Structured Ductile Iron. MTech thesis.
R
Raj, Kundan and Sood, Sidharth and Panda, Amlan Prateek and Panigrahi, Sridhar Kumar and Pabba, Abhimanyu (2011) An attempt at optimizing the flow characteristics of blast furnace slag by investigation of synthetic slags prepared in the laboratory using pure oxides. BTech thesis.
S
Sahoo, Sandeep Kumar (2012) A Study on the effect of austempering temperature, time and copper addition on the mechanical properties of austempered ductile iron. MTech thesis.
Salim, Mohammad (2015) Tribological Behavior of Heat Treated Spheroidal Graphite Cast Iron. MTech thesis.
Samantaray, Rajashree (2021) Sequestration of Activated Carbon from a Wasteland Weed and its Application in High Performance Supercapacitor-based Energy-Storage System. PhD thesis.
Satyavolu, S (2014) Optimization of production parameters in sms plant, welspun. MTech thesis.
Shama, Shaik (2017) Comparison of Mechanical Properties of Austenitic Ductile Cast Iron with Ferritic/Pearlitic Ductile Cast Iron. MTech by Research thesis.
Shekhar, Sudhanshu and Jaiswal, Amit (2008) Heat treatment of S.G cast iron and its effects. BTech thesis.
Singh, Harshpreet (2015) Development of Cu-Based Metal Matrix Composites Using Silicon Carbide, E-Glass Fiber and Multiwalled Carbon Nanotubes as Reinforcement. MTech by Research thesis.
Singh, Subhram Keshary and Krishnan, Tintula (2008) Reduction kinetics of iron ore pellets and
the effect of binders. BTech thesis.
Swain, Biswajit Kumar (2022) Mechanical, Tribological and Hydrophobic Properties Evaluation of Atmospheric Plasma Sprayed NiTi Coating. PhD thesis.
Swain, S K (2008) Effect of Chemistry and Processing Variables on the
Mechanical Properties of Thin-wall Ductile Iron Castings. MTech by Research thesis.
Swain, Susanta Kumar (2015) Property Development in As-Cast Heavy Section SG Iron Castings by Alloying with Nickel and Copper. PhD thesis.
T
Talapaneni, Trinath (2019) Physicochemical Properties of CaO-MgO-SiO2-Al2O3 Synthetic Slag. PhD thesis.
Tangi, Lakshmana Rao (2012) Effect of processing parameters on austempering behavior of alloyed/unalloyed ductile iron. MTech thesis.
Tripathy , Subhrasmita (2016) Effect of Pre-strain and Pre-corrosion on Ratcheting Behavior of ASTM A668 Class D Steel. MTech by Research thesis.
V
Vinjamuri, Raviteja (2022) Roles of Uniaxial, Shear and Cyclic Loading on the Microstructure and Texture Evolution during Plastic Deformation of Ti6Al4V Alloy. PhD thesis.
This list was generated on Fri Apr 19 05:24:05 2024 IST.
