Items where Division is " Engineering and Technology > Department of Mechanical Engineering" and Year is 2018
Number of items: 90.
A, Aswin Jagadeesh. (2018) Numerical investigation of Taylor bubble flow distribution in multi cross-branched microchannels. MTech thesis.
., Ritesh Prasad (2018) Study the Microstructural and Mechanical Behaviours
Aadhithiyan , A K (2018) Studies on Hard Chrome Plating on Cylinder Liner of Air Compressor and Numerical Analysis of Cascade Cooler for an Air Separation Unit. MTech thesis.
Arora, Shashank (2018) Thermo-Hydrodynamics Analysis of Offset Fin in Compact Heat Exchanger using ANSYS Fluent. MTech thesis.
B., Chetankumar (2018) Performance Study of an Automotive Fresh Air Subwoofer. MTech thesis.
Behera , Anita (2018) Design, Fabrication and Testing of HTS-based Current Lead used for Cryogenic Application. MTech thesis.
Bhansali, Pratik Santosh (2018) Optimisation of Purge Seal for Turbopump. MTech thesis.
Bhuyan, Pranjal (2018) Effect of Operating Conditions, Lobe-number, Clearance Size and Rotor Profile on the Transient Hydrodynamics, Heat Interaction, and Performance of a Root Blower. MTech by Research thesis.
Bondada , Vinay (2018) Effect of Magnetic Field on MRR and surface Roughness in Electrochemical Machining. MTech thesis.
C, Madan Raj (2018) Determination of Safety Integrity Level of a Sugar Plant
Chaudhari, Rohit (2018) Vibration Analysis of Tapered Pre-Twisted Functionally Graded Rotating Blade. MTech thesis.
Chaurasia, Bipin Kumar (2018) Mechanical and Tribological Behavior of Eulaliopsis Binate (Short Fiber) Reinforced Epoxy Polymer Composite. MTech thesis.
Chouhan , Abhijeet Singh (2018) Balancing and Control Strategy of Two-Wheeled Self-Balancing Mobile Robot using Hybrid PSO-Fuzzy-PID Controller. MTech thesis.
Dey, Biswajit (2018) Selection of Dielectric Media (Kerosene and Used Transformer Oil) towards Improving Efficiency of Powder-Mixed EDM. MTech thesis.
Dhananjay, Adarsh (2018) Effects of Various Nanofluids on Different Machinability Aspects of AISI 4340 Hardened Alloy Steel. MTech thesis.
Dhananjay , Adarsh (2018) Effects of Various Nanofluids on Different Machinability Aspects of AISI 4340 Hardened Alloy Steel. MTech thesis.
Gavel, Vikas (2018) Modelling and Analysis of Pineapple Honeycomb Core Sandwich Composites. MTech thesis.
Ghosh, Abhijeet (2018) Study of Mechanical and Tribological Properties of AZ91/SiC Composites. MTech thesis.
Goel, Anuj Kumar (2018) Upgradation of Bio-Gas Using Cryogenic Upgradation Technique. MTech thesis.
Gupta, Ajay Kumar (2018) Performance of Plate Fin Heat Exchanger at Cryogenic Temperature. PhD thesis.
Gupta, Prashant (2018) Studyon Thermal Characteristics of Epoxy Composites Filled with Micro Size Rutile Particles. MTech thesis.
Haldar, Nimai (2018) Experimental Studies on AA6063-Cu Dissimilar Friction Stir Welding Using Inconel 601 Tool. MTech thesis.
Isaac Ivo , de Souza (2018) Development of a Stirling cycle based cryocooler. MTech thesis.
Jalli, Sagar Kumar (2018) Numerical study to optimize the heat transfer rate of
Jha, Aman Kumar (2018) Structure-property correlation of wear plates. MTech thesis.
JOSEPH, SHINCE V. (2018) Buckling, Free Vibration and Dynamic Stability of Sandwich Plates with Functionally Graded Material Constraining Layer. PhD thesis.
Khan, Akhtar (2018) Machinability Assessment of Commercially Pure Titanium (CP-Ti) Grade 2 during Turning Operation. PhD thesis.
Koustubh, Bhosarkar (2018) Numerical Simulation of 3 Buffer type Pulse tube Cryocooler. MTech thesis.
Krishnatreya, Dravida (2018) Numerical Analysis to Visualize the Flow Pattern
Kumar, Avinash (2018) Free Transverse Vibration Analysis of Thin Rectangular Plates Having Arbitrarily Varying Non-Homogeneity Along Two Concurrent Edge. MTech thesis.
Kumar, Ch Sateesh (2018) Effect of Surface Modifications on the Hard Turning Performance of Al2O3/TiCN Mixed Ceramic Cutting Tools. PhD thesis.
Kumar, Manoj (2018) Experimental Studies of EDM Performance on TI-6AL-4V Alloy: Effects of Process Factors on Machinability. MTech thesis.
Kumar, Vikash (2018) Fabrication of Compression Moulding Machine and Analysis of Fiber Reinforced Polymer Composites Using Finite Element Method. MTech thesis.
Kumar , Anshuman (2018) Effects of Cryo-Treatment on the Cut Qualities of Ti-6al-4v Eli Alloy During Wire-Edm Operation. MTech thesis.
Mallick, Nirmal Charan (2018) Study of Algae Growth Using co2 From the Engine Exhaust. MTech thesis.
Manhare, Devendra Kumar (2018) Static and Vibration Analysis of Aluminium and Carbon Hybrid Composite Plate. MTech thesis.
Mansaram, Mahajan Vaibhav (2018) Experimental Study on Dimensional Accuracy of FDM Build Part. MTech thesis.
Mishra , Vivek Kumar (2018) Development of A Test Facility and Measurement of Performance of A Three Stream (He/He/He) Plate Fin Heat Exchanger. MTech thesis.
Mohapatra, Kasinath Das (2018) Experimental and Numerical Investigations of Machining Ti-6Al-4V Spur Gears Using WEDM Process. PhD thesis.
Mohapatra, Lopamudra (2018) Characterization & Abrasive Wear Behavior of Bio-fiber Based Carbon Black Reinforced Epoxy Composites. MTech thesis.
Nashine, Chandan (2018) Design and Analysis of LOX Pump for 10 Tonne Thrush LCH4-LOX Cryogenic Engine. MTech thesis.
Nayak, Pritish Kumar (2018) Processing, Characterisation and Mechanical Behaviour of Rice Husk Filled Jute Epoxy Hybrid Composite. MTech thesis.
Nayak , Praveen Kumar (2018) Effect of Process Parameters on the Mechanical Behaviour of FDM and DMLSBuild Parts: an Experimental Investigation. MTech thesis.
Nayak , Rakesh Rajan (2018) Experimental Study of Biogas Production & its Utilization in CI Engine in Dual Fuel Mode. MTech thesis.
Nayak , Satyabrata (2018) Design and Simulation of Linear or Rotary Electromagnetic Actuator. MTech thesis.
Padaseti, Bijaya Kumar (2018) Experimental and Numerical Investigation on the Key Machinability Measures of Hastelloy C276 During Wire-EDM Operation. MTech thesis.
Padhee, Chinmaya Kumar (2018) Microstructure Evolution and Mechanical Performance of W-Niti Composite Coating Produced on Ti-6Al-4V Titanium Alloy by TIG Cladding Method. MTech thesis.
Pagidipalli, Bhanu Chandar (2018) Numerical Analysis of Pulse Tube Refrigerator using Mixture of Gases as the Working Fluid. MTech thesis.
Parhi, Debasis (2018) Numerical Study of Shell and Tube Heat Exchanger Using C.F.D. MTech thesis.
Parida, Gati Ranjan (2018) Heat Transfer and Flow Friction Characteristics of Rectangular Plain Fin Heat Exchanger. MTech thesis.
Parida, Smita (2018) On the Linear and Nonlinear Free Vibration of Functionally Graded Material Plates in the Thermal Environment. PhD thesis.
Patnaik, Prabina Kumar (2018) Processing, Characterization and Slurry Abrasion Wear Behaviour of Needle-Punched Nonwoven Fabric Reinforced Polymer Composites. PhD thesis.
Patra, Abhishek (2018) Static and Vibration Analysis of Glare Hybrid Composite. MTech thesis.
Paul, Binay Kumar (2018) Performance of Additive Mixed Electro-Discharge Machining of Inconel 718 Super Alloys. MTech thesis.
Pradhan, Biren Kumar (2018) Static and Dynamic Analysis of Gas Foil Journal Bearing for High-Speed Rotor. MTech thesis.
Pradhan , Diptimayee (2018) CFD Analysis of Regenerator of a GM cryocooler. MTech thesis.
Pradhan , Pullak (2018) A Reduced Model of Higher Order Composite Rotor using Balanced Realization Technique. MTech thesis.
Praharaj, Ami t Kumar (2018) Simulation of Electrolyte Flow Pattern and Variation of MRR With Machining Variables in ECM for L-shaped Tool using CFD. MTech thesis.
Prakash, Ved (2018) Mechanical and Erosion Wear Behavior of Syngonanthus Nitens Fiber Reinforced Epoxy Composite. MTech thesis.
Pulagam, Madhu Kalyan Reddy (2018) Numerical Analysis of a High Pressure Helical Coil
Purohit, Abhilash (2018) Processing and Tribo-Performance Analysis of Polymer Composites Filled with Linz-Donawitz Sludge. PhD thesis.
Ramana , Kukarasi (2018) Development of Cryogenic Helium Turboexpander. MTech thesis.
Ramteke, Prashik Malhari (2018) Design and Dynamic Analysis of Laminated Smart Composite Plate. MTech thesis.
Rawat, Himanshu (2018) Path Planning and Control of various moving robots using Artificial Intelligence techniques in unknown cluttered environment. MTech thesis.
Roy, Kanchan (2018) Study of Damping in Epoxy-Al2O3/Glass Composite Beams. MTech thesis.
S , Sujaykhosh (2018) Effect of Silicon Carbide as Filler Reinforcement on the Damping properties of Glass-Fibre Epoxy Composites. MTech thesis.
Sahoo, Biswajit (2018) Study and Analysis of Mobile and Humanoid Robots using Intelligent Optimization Techniques. MTech thesis.
Sahoo , Gunamani (2018) Design Calculation of Compact Plate and Fin Type of Heat Exchanger for Helium Liquefaction System. MTech thesis.
Sahoo , Bibhuti Bhusan (2018) Buckling, Vibration and Dynamic Stability of Sandwich Beams with Functionally Graded Material Constraining Layer. PhD thesis.
Sahu, Akash Kumar (2018) Performance Study of Cryogenic Turboexpander Using Gas Foil
Sahu, Chinmaya (2018) Navigational Analysis of Artificial Intelligence based Control Strategy for Humanoid Robot. PhD thesis.
Sahu, Madhusmita (2018) Performance of Used Transformer Oil as Dielectric Media During EDM of Inconel 718 Super Alloys. MTech thesis.
Sarkar, Binay Krishna (2018) Flow-Regime of a Liquid-Liquid Counter Current Two-Phase Flow. MTech thesis.
Sha, Bibhu Bhusan (2018) Numerical and experimental investigation of common header pulsating heat pipe. MTech thesis.
Siddiqui, Mohammad Tabish (2018) Study of Sloshing Force in 3-D Rectangular Tank with and without Baffles Under Linear Acceleration. MTech thesis.
Singh, Abhishek Kumar (2018) Developent of Helium Re-condenser for 1.5 T ZBO MRI Scanner. MTech thesis.
Singh, Devender (2018) Finite Element Modeling and Dynamic Analysis of Propulsion Rotor System. MTech thesis.
Singh, Gaurav Jaiprakash (2018) Static and Vibration Analysis of Glass Aluminium Reinforced Epoxy(glare) Cylindrical Panel. MTech thesis.
Singh, Subhajit (2018) Surface Roughness Estimation of FDM and DMLS Build Parts. MTech thesis.
Singh , Vivek Pratap (2018) Investigations on Sudden Unbalance Effects in Overhung Bowed Rotor System. MTech thesis.
Swain, Ashirbad (2018) Viscoelastic Modelling and Dynamic Analysis of CNT-based Composite Shell Panels. PhD thesis.
Swain, Mahendra Kumar (2018) Forced Vibration of Isotropic and Nonhomogeneous Rectangular Plate of Linearly Varying Thickness. MTech thesis.
Swain, Priyadarshi Tapas Ranjan (2018) Mechanical, Thermal and Tribological Behaviour of Surface Modified Jute Fiber Reinforced Epoxy Composites. PhD thesis.
Swar, Avinash (2018) Experimental Study of a Diesel Engine Using Pretreated Biogas on Dual Fuel Mode at Different Injection Timings. MTech thesis.
Upadhyay , Shivam (2018) Dynamic Analysis of Cracked Viscoelastic Beam with Circular Cross Section using an Operator Based Finite Element Approach. MTech thesis.
Vimal , Prashant Mahesh (2018) CFD Analysis of Fluid Flow in Centrifugal Compressor. MTech thesis.
Waghmare , Dipak Tanaji (2018) Niti Coating on Ti-6Al-4V Alloy by TIG Cladding Process for Improvement of Wear Resistance: Microstructure Evolution and Mechanical Performances. MTech thesis.
Yadav , Surendra Prasad (2018) Study on Effective Thermal Conductivity of Fiber Reinforced Epoxy Composites. MTech thesis.