Items where Division is " Engineering and Technology > Department of Mechanical Engineering" and Year is 2007

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Jump to: B | C | D | G | J | K | M | N | O | P | R | S | T | V
Number of items: 58.

B

Bagh, Ashwin kumar and Behera, Nikesh kumar (2007) Detecting shift in a Weibull process using bootstrap method. BTech thesis.

Behera, Dibyajyoti and Mohapatra, Abinash (2007) Design of a pen which remembers what it writes. BTech thesis.

C

Cherukuri, Krishna Swamy (2007) Thermal network theory for switchgear under continuous current. MTech thesis.

Chourasiya, Bhuwaneshwar (2007) Navigation of mobil robot using fuzzy logic controller. MTech thesis.

D

Das, Debashish and Das, Sambit (2007) Design of the drive mechanism for a reciprocating coal feeder. BTech thesis.

Das, Samarendra and Nanda, Gopal Krishna (2007) Development of an erosion testing machine. BTech thesis.

Datta, Abhijit and Manna, Swarnendu (2007) Kinematic analysis of wheeled mobile robot. BTech thesis.

Datta, Sandip and Samad, Sabir Kumar (2007) Data mining of machine design elements using AI techniques. BTech thesis.

Dear, Rishi Kumar (2007) Estimation of power generation potential of agricultural based biomass species. MTech thesis.

Dikshit, Vishwesh (2007) Development of compact copper-stainless steel heat exchanger using diffusing bonding techniques. MTech thesis.

Dwivedi , Piyush and Vishal , Vivek (2007) Particle swarm optimization applied to job shop scheduling. BTech thesis.

G

Goudhaman, J (2007) Experimental Investigation of Hot Machining Process of High Manganese Steel using Design of experiments by Taguchi Method. BTech thesis.

Goudhaman, J (2007) Experimental investigation of hot machining process of high manganese steel using SNMG carbide inserts by design of experiments using taguchi method. BTech thesis.

Gunde, Rajesh Babu (2007) Analysis of fatigue crack growth retardation due to overloading by using AFGROW. MTech thesis.

Gupta, Rishi and Namdeo Pendam, Ashish (2007) Navigation of mobile robots using artificial intelligence technique. BTech thesis.

J

Jesthi, Sanjit and Chanakya, Abhinav (2007) Buffer allocation strategies in shop floor using simulation. BTech thesis.

Jha , Amit Kumar (2007) Free vibration analysis of sandwich panel. MTech thesis.

K

K, Venkata Sai Gopal (2007) Static analysis of cross-ply laminated composite plate using finite element method. MTech thesis.

Kanchan, Manu and Bansal, Ankur (2007) Conceptual design to transfer handicapped or old people from one platform to another. BTech thesis.

Kanhar, Sunil Kumar and Senapati, Sudipta (2007) Analytical approach to the determination of dynamic characteristics of a cracked beam. BTech thesis.

Kar, Amit Bikram and Saran , Abhisek (2007) Transient radiative transport in homogeneous/ non-homogeneous participating medium. BTech thesis.

Kar, Satya Prakash (2007) CFD analysis Of printed circuit heat exchanger. MTech thesis.

Kumar, Rajeev (2007) Numerical solution of moving boundary problem related to continuous casting. MTech thesis.

Kumar , Shiv Ranjan (2007) Design of plant layout having passages and inner structural wall using particle swarm optimization. MTech thesis.

M

M, Chaithanya (2007) Processing & Characterization of Nickel-Aluminide Coating on Metal Substrates. MTech thesis.

Mahapatra, Mitrabhanu and Biswal, Satya Prakash (2007) Finite element analysis of multifarious machine components. BTech thesis.

Maharana, Ashwini Kumar and Sahoo, Manas Ranjan (2007) Layout Planning with Isles: A Genetic Approach. BTech thesis.

Mandal, Dinesh Kumar and Mahapatra, Manik Chandra (2007) Dynamic sability of rotating shaft under parametric excitation subjected to specified boundary conditions. BTech thesis.

Mazumdar, Sourav and Singh, Rahul (2007) CFD studies on flow through compact heat exchangers. BTech thesis.

Mishra, Punyapriya (2007) Effect of environment on mechanical properties of bagasse fiber reinforced polymer composite. MTech thesis.

Mishra, Shankar (2007) Estimation of power generation potential of nonwoody biomass species. MTech thesis.

N

Nalla, Thulasiram (2007) Vibration analysis of a cracked beam with elastic support. MTech thesis.

Nayak, Paresh Ranjan (2007) Electronic chip cooling in vertical configuration using fluent gambit. BTech thesis.

Nayak, Shweta and Mishra, Swetaleena (2007) Effects of addendum modification on root stress in involute spur gears. BTech thesis.

O

Ohid, Soumya Aditya (2007) Bullwhip effect in supply chain management. MTech thesis.

P

Pati, Pradeep Kumar (2007) Design and development of an AGV using RF module. BTech thesis.

Patnaik, Kishore Chandrasekhar and Soni, Manish (2007) 3-D Solid Modeling of Screw and Scroll Compressors Including Animation. BTech thesis.

Patnaik, Sidhartha and Pattnaik, Biswajit (2007) Design and Analysis of Impact Crushers. BTech thesis.

Patra, Saroj Kumar (2007) CFD analysis of electronics chip cooling. MTech thesis.

Pradhan, Saroj Kumar (2007) Navigation Techniques for Control of Multiple Mobile Robots. PhD thesis.

Priyadarshini, Amrita (2007) A study of the effect of cryogenic treatment on the performance of high speed steel tools and carbide inserts. MTech thesis.

Pujapanda, Asim and Acharya, Sibashish Priyadarshi (2007) Identification of control chart patterns using neural networks. BTech thesis.

R

Raghuvanshi , Sourabh Singh (2007) Study of digital modulation techniques in the presence and absence of noise. BTech thesis.

Rao, K Sudhakara (2007) Analysis of flow maldistribution in tubular heat exchangers by fluent. MTech thesis.

Reddy, G Chanukya (2007) CFD studies on flow through screw compressor. MTech thesis.

Roy, Sayan and Sahoo, Soumya Ranjan (2007) Path Planning of Mobile Agents using AI Technique. BTech thesis.

S

S, Naga Mahendra Babu (2007) Processing, characterization and tribological evaluation of peek-glass fiber composites. MTech thesis.

Sahoo, Ranjan and Samantaray, Pinaki (2007) Study of friction welding. BTech thesis.

Satyanarayan, Shivakumar and Patel, Amarendra Kumar (2007) Dynamic stability of layered beams with bolted joints under parametric excitation. BTech thesis.

Shantharam, Pradeep and Murali, R (2007) Creative Design of a Device that not only Cleans the Teeth but also Anti-Germinates. BTech thesis.

Sinha, Saikat and Patel, Bimal (2007) Solid particle erosion of jute fibre reinforced red-mud filled epoxy resin composite. BTech thesis.

Soni, Pankaj Kumar and Gholley, Raju (2007) Study and analysis of residual stresses in electro-discharge machining(EDM). BTech thesis.

Srivastava, Shivam and Saraogi, Mayur (2007) Electronic chip cooling in horizontal configuration using fluent-gambit. BTech thesis.

Sudhakarapandian, R (2007) Application of Soft Computing Techniques for Cell Formation Considering Operational Time and Sequence. PhD thesis.

T

Tenali , Vijaya Sagar (2007) Simulation of electro-hydraulic servo actuator. MTech thesis.

Tirkey, Sanjeeb Kumar (2007) Three dimensional analysis of lateral extrusion of some complex forms. MTech thesis.

Tripathy, Sasmeeta (2007) Thermal-electrical modelling of electrical discharge machining process. MTech thesis.

V

V, Venkatesh and R, Chandru (2007) Experimental Study of Pulse Tube Refrigerators. BTech thesis.

This list was generated on Tue Sep 26 01:55:42 2017 IST.