Number of items: 162.
Thesis
Kumar, Abhishek (2014) A study on mechanical and sliding wear behaviour of e-glass fibre reinforced epoxy composites. MTech thesis.
., Om Prakash (2014) Elastic plastic fracture behavior and effect of band- overload on fatigue crack growth rate of an HSLA steel. MTech thesis.
., Priyanka (2014) Multi Response optimization of characteristics of AISI D2 steel using utility concept and harmonic search method machined with different tool materials. MTech thesis.
Acharya, Soham (2014) Mathematical modeling of bioethanol fueled DI diesel engine. BTech thesis.
Aditya, . (2014) Resilient supplier selection through fuzzy-topsis. BTech thesis.
Agrawal, Priyanka and Varma, Nitish (2014) Experimental and Numerical Investigation of Strength of Inertial Entrainment. BTech thesis.
Agrawalla, Y (2014) Optimization of machining parameters in a turning operation of austenitic stainless steel to minimize surface roughness and tool wear. BTech thesis.
Ahmad, D (2014) Vibration analysis and control of rotating composite shaft system using active magnetic bearings. MTech thesis.
Anandita, S (2014) Application of MoS2 based cutting fluids in minimum quantity lubrication during machining of stainless steel AISI 316. MTech thesis.
Arka, G N (2014) Optimization of the machining parameters for ultrasonic vibration assistedturning of hard material. MTech thesis.
Asdaque, P. M. G. Bashir (2014) Vibration analysis of non-uniform shaft-rotor system. MTech by Research thesis.
Ashok, Divekar Aniket (2014) Design and analysis of kinematically redundant planar parallel manipulator for isotropic stiffness condition. MTech thesis.
Baad, S (2014) Vibration analysis and damping characteristics of hybrid composite plate using finite element analysis. MTech thesis.
Bal, P K (2014) Thermal conductivity of cement kiln dust filled epoxy composites. BTech thesis.
Banjare, Johan (2014) Equivalent Thermal Conductivity of Epoxy Composites Filled with Aluminium and Red Mud Particles. MTech thesis.
Baral, Ansuman (2014) Flexible job shop scheduling operation. BTech thesis.
Barik, Rashmiranjan (2014) Characterization, Rheological and Pipe Loop Test Studies on Fly Ash Samples. MTech thesis.
Behera, A (2014) Optimization of process parameters in laser welding of dissimilar materials in lap joint configuration using multi-objective Taguchi analysis. MTech thesis.
Behera, Adarsh Kumar (2014) Design and Analysis of Internal 20 K Helium Gas Purification System for the kW Class Helium Refrigerator/Liquefier. MTech thesis.
Behera, Jyoti Ranjan (2014) Investigation and proximate analysis of carbon black from waste tyre. BTech thesis.
Behera, Sameer Kumar (2014) Heat transfer analysis of blast furnace stave cooler. MTech thesis.
Bhunya, D K (2014) Simulation study of cryogenic air separation unit using Aspen Hysys at Rourkela steel plant. MTech thesis.
Boipai, Budhram (2014) FEM analysis for WEDM process. MTech thesis.
Chatterjee, Suman (2014) A Study on Parametric Appraisal of Drilling on Bio-compatible Materials. MTech by Research thesis.
Choudhury, Gourav (2014) Barrelling test of t-section aluminium billet at room temperature. BTech thesis.
D, Tijo (2014) Electrical discharge coating of ceramic metal composite on metal substrate using powder compact electrodes. MTech thesis.
Dalai, S K and Chand, P R (2014) Optimisation of abrasive wear of rice husk reinforced epoxy composite by using response surface methodology. BTech thesis.
Das, M K (2014) Selected heuristic algorithms for solving job shop and flow shop scheduling problems. BTech thesis.
Das, S (2014) Optimization of heat transfer using CFD simulation for concentric helical coil heat exchanger for constant temperature outer wall. BTech thesis.
Dash, S K and Marandi, M D (2014) Navigation control of an automated mobile robot robot using neural network technique. BTech thesis.
Dehury, Sourprakash (2014) Experimental study and modeling of diesel engine fueled with rubber seed oil. BTech thesis.
Dewangan, A (2014) Numerical investigations of flooding for two-phase counter-current flow. BTech thesis.
Dewangan, Shailesh Kumar (2014) Multi-objective optimisation and analysis of EDM of AISI P20 tool steel. PhD thesis.
Dhakarwal, Mukesh (2014) Development of ccr based variable temperature insert for cryogen free superconducting magnet system. MTech thesis.
Dutta, Shounak (2014) Modelling and analysis of resistive superconducting fault current limiter. MTech thesis.
Gautam, A K (2014) Solution of different multi-criteria decision making engineering problems by PROMETHEE II and VIKOR. BTech thesis.
Gautam, C K (2014) Numerical investigation on the performance of inertance tube pulse tube refrigerator by varying compressor amplitude. MTech thesis.
Gupta, S K (2014) A study on mechanical behavior of bamboo fiber based polymer composites. BTech thesis.
Gupta , Rajeev Kumar (2014) Life prediction model for creep-fatigue interaction of P92 advanced grade martensitic steel. MTech thesis.
Haridas, B (2014) A study on mechanical and thermal behavior of coir fiber reinforced epoxy composites. MTech thesis.
Hemanth, Poripireddy (2014) Laser coating of titanium carbide and titanium boride on aluminium substrate. BTech thesis.
Hussain, M A (2014) Buckling analysis of functionally graded carbon nanotubes reinforced composite (FG-CNTRC) plate. MTech thesis.
Hussain, Md.Afzal (2014) Effect of low cycle fatigue damage on tensile behavior of sensitized stainless steel. MTech thesis.
Islam, Tayyab (2014) Analysis of Dissimilar Metal Welding of 1020 Mild Steel and 304 Stainless Steel. MTech thesis.
Istiyaq , M and Agarwal, A (2014) Prestressed modal analysis of non uniform beam using ansys. BTech thesis.
Jadhav, N (2014) Analysis of cooling capacity and optimization of compressor outlet pressure for KW class helium refrigerator/liquefier. MTech thesis.
Jefrin Jose , P (2014) Dynamics and Control of Flexible Composite Robotic Manipulators Based on Finite Element Method. MTech by Research thesis.
Kanungo, S (2014) Numerical analysis to optimize the heat transfer rate of tube-in-tube helical coil heat exchanger. MTech thesis.
Kar, Punit (2014) Design and analysis of cold box and its internal component layout for kW class Helium Refrigerator/Liquefier. MTech thesis.
Kavi, Binit (2014) Dynamics and Damping of Thin Riveted Beam Composite Structures of Various Configurations. PhD thesis.
Khare, A (2014) Study of dynamic stress and estimation of life for viscoelastic rotor-a finite element approach. MTech thesis.
Kumar, B M (2014) Numerical investigation on the performance of inertance tube pulse tube refrigerator varying compressor frequency. MTech thesis.
Kumar, M (2014) Phasor analysis of GM-type double Inlet pulse tube refrigerator. BTech thesis.
Kumar, S (2014) Study on mechanical behaviour of banana fiber reinforced epoxy composites. BTech thesis.
Kumar, Sikandar (2014) Active vibration control of rotating composite shaft system. MTech thesis.
Kumar, T N (2014) Vibration analysis of viscoelastic sandwich beam using finite element method. MTech thesis.
kumar, V B (2014) Control of a Superconducting Magnetic Energy Storage unit for Synchronous Generator Damping Enhancement. MTech thesis.
Kumar , A (2014) A study on mechanical behaviour of hair fiber reinforced epoxy composites. BTech thesis.
Kumar , Ashish (2014) Design and Development of Cryocooler Based Liquid Nitrogen Plant. MTech thesis.
Kumar , Ranjan (2014) Fault Diagnosis of Inclined Edge Cracked Cantilever Beam Using Vibrational Analysis and Artificial Intelligence Techniques. MTech thesis.
Kundu, Pritam Kumar (2014) Design and fabrication of work holding device for a drilling machine. BTech thesis.
Mahapatra, Omshree (2014) Design Of 3-Stream(He-He-He) Plate-Fin Heat Exchanger For Helium Plant. MTech thesis.
Mahapatra, Shubharanshu Shekhar (2014) Experimentation and Evaluation of Tyre Pyrolysis Oil. BTech thesis.
Malhotra, Rishabh (2014) Differential Evolution Optimization Technique To Design
Gear Train System. BTech thesis.
Mallick, S (2014) Study on pulsed Nd:YAG laser butt welding of high carbon steel. BTech thesis.
Meher, Siddharth (2014) Development of a Software for Rotodynamic Analysis Of Flexible Rotor. BTech thesis.
Minj, Amit Prem Prakash (2014) Green supply chain performance assessment: exploration fuzzy logic to tackle linguistic evaluation information. BTech thesis.
Mishra, A K (2014) Deformation Behaviour of C-Mn440 Automobile Steel under Varying Strain Rates. MTech thesis.
Mishra, D (2014) A study on thermal and dielectric characteristics of solid glass microsphere filled epoxy composites. PhD thesis.
Mishra, D K (2014) Thermo-mechanical Processing of API-X60 grade pipe line steel. MTech thesis.
Mishra, Diptatej (2014) A Fuzzy Based Decision Making Approach for Selecting and Evaluating Green Suppliers. BTech thesis.
Mishra, P (2014) Thermo-hydrodynamics of pulsating laminar flow in a microtube: a numerical study. MTech thesis.
Mishra, Sandeep (2014) Free Vibration Analysis of Curved Panels. BTech thesis.
Mishra, Subrat (2014) Combined loose piece pattern for a complex job. BTech thesis.
Mishra, Vivek (2014) Physical, mechanical and abrasive wear behaviour of jute fiber reinforced polymer composites. PhD thesis.
Mohan, P (2014) Study the effects of welding parameters on TIG welding of aluminium plate. MTech thesis.
Mohanty, A (2014) Influence of CVD multilayer coating on machinability characteristics of aerospace grade stainless steel. MTech thesis.
Mohanty, S K (2014) Thermal energy distribution and optimization of process parameters during electrical discharge machining of AISI D2 steel. BTech thesis.
Mohanty, Suranjan (2014) Modelling of hard turning process. MTech thesis.
Nahak, Rajat Kumar (2014) Conceptual design of casting patter. BTech thesis.
Naik, Jitendra (2014) Dynamic response of beam and frame structure subjected to moving load. MTech thesis.
Naik, Lalit Ranjan (2014) CFD analysis of heat transfer in a helical coil heat exchanger with constant heat flux boundary condition. BTech thesis.
Nandy, Ajoy Kumar (2014) Heat transfer analysis of blast furnace refractory lining. MTech thesis.
Nayak, B (2014) Multi-response optimization in machining: exploration of TOPSIS and Deng’s similarity based approach. MTech thesis.
Nayak, S (2014) Torsional rigidity in beams with arbitrary cross-sections. BTech thesis.
Nayak, Sourava Jyoti (2014) Buckling analysis of swcnt reinforced composite plate. BTech thesis.
Nayak , S K (2014) Comparative study of machinability characteristics during machining nimonic c-263 with uncoated and cvd multicoated carbide inserts. BTech thesis.
Nema, Puneet Kumar (2014) Computational study of sloshing behavior in 3-D rectangular tank with and without baffle under Seismic Excitation. MTech thesis.
P.S., Shihabudeen (2014) Design of rotary, turbo-molecular and cryo-sorption pumping systems for vacuum laboratory. MTech thesis.
Pandey, Krishna Kant (2014) Design and analysis of Intelligent Navigational
controller for Mobile Robot. MTech by Research thesis.
Panigrahi, Soumya (2014) Fuzzy-TOPSIS for Appropriate Site Selection for Establishing a Thermal Power Plant. BTech thesis.
Patel, N K (2014) Parametric optimization of process parameters for EDM of stainless steel 304. MTech thesis.
Patro, Brundaban (2014) Eulerian modeling of gas-solid multiphase flow in horizontal pipes. MTech by Research thesis.
Penthia, Trilochan (2014) Design and modelling of vacuum experimental set-ups. MTech thesis.
Pol, M S (2014) Navigation of mobile robot in cluttered environment. MTech thesis.
Pothal, Jayanta Kumar (2014) Intelligent motion planning and obstacle avoidance for multiple mobile robots in highly cluttered environments. PhD thesis.
Prasad , Rajeev R (2014) Axial Conduction in a Partially Heated Microchannel Subjected to Isothermal Boundary Condition. MTech thesis.
Purohit, Abhilash (2014) Dephosphorization of steel produced from sponge iron in the induction furnace. MTech thesis.
Pyasi, A (2014) Value added metal extraction from red mud. MTech thesis.
Raghav, G H (2014) Numerical analysis of hydraulic jump by an impinging jet. MTech thesis.
Ranjan, R (2014) Surface modification by Electro-Discharge Coating (EDC) with Tic-Cu P/M electrode tool. BTech thesis.
Ravindra, Vutukuru (2014) Design, development and testing of nb-ti superconducting magnet & creation of liquid helium test facility. MTech by Research thesis.
Rose, B (2014) Thermo-hydrodynamics of single phase flow in microchannel with obstacles. MTech thesis.
Roy, Abhijit (2014) Economic Design of X-bar Chart Using Genetic Algorithm. MTech thesis.
Sah , Sudhir (2014) Design and development of a packedbed scrubber for upgradation of biogas using a closed-loop process: An
economical and environmental approach. BTech thesis.
Sahoo, A G (2014) A decision support framework towards benchmarking of enterprise (supply chain) agility: an empirical research. BTech thesis.
Sahoo, A K (2014) Static, free vibration and dynamic stabilty analysis of sandwich beam with functionally graded material constraining layer in high temperature environment. MTech thesis.
Sahoo, L (2014) CFD analysis of heat transfer in a helical coil heat exchanger with constant wall heat transfer coefficient. BTech thesis.
Sahoo, S and Naik, K and Sahoo, S S (2014) Thermo-mechanical analysis of carbon nanotube based functionally graded Timoshenko beam. BTech thesis.
Sahu, Madhusmita (2014) A study on thermal characteristics of polymer composites
filled with micro sized tio2 particles. MTech by Research thesis.
Sahu, Chandan Kumar (2014) Design of Blade Contour for High Speed Expansion Turbine. BTech thesis.
Sahu, J K (2014) TiB2-TiC-Al2O3 coating on Aluminium substrate by in-situ laser coating process using pulsed Nd: YAG laser. MTech thesis.
Sahu, P K (2014) Study of hydrogen assisted cracking in ship building grade steel. MTech thesis.
Sahu, Praseed (2014) Buckling analysis of Laminated Composite plates. BTech thesis.
Sahu, S (2014) Non-linear forced vibration analysis of axially functionally graded tapered beam with various end conditions. MTech thesis.
Sahu, Santosh Kumar (2014) Development of decision support systems towards supply chain performance appraisement. MTech by Research thesis.
Sahu, Y K (2014) Study on the effective thermal conductivity of fiber reinforced epoxy composites. MTech thesis.
Sahu , Sandip Kumar (2014) Cooling Load Estimation for a Multi-story office building. MTech thesis.
Samal, C (2014) Study of process parameters towards improving efficiency of closed die hot forging process. MTech thesis.
Samal, Soubhagya Ranjan (2014) Effective thermal conductivity of epoxy matrix composites filles with coconut coir dust. BTech thesis.
Samantarai, Shakti Prasad (2014) Tribological behaviour of rice husk reinforced polymer matrix composite. PhD thesis.
Sandeep, E S (2014) Synthesis and characterization of ODS-304L steels by mechanical alloying. MTech thesis.
Sarangi, Prakash (2014) An Indigenous Automated GupChup Machine. BTech thesis.
Sarangi, Sambit (2014) Dynamic analysis of a wind turbine blade. BTech thesis.
Satapathy, A K (2014) Numerical simulation of slip flow heat transfer in a microtube. MTech thesis.
Satpathy, Subhransu Mohan and Dash, Praveen (2014) Dynamic analysis of cantilever beam and its experimental validation. BTech thesis.
Sena, A K and Maharana, A (2014) Prediction of fatigue crack propagation in a cracked beam specimen. BTech thesis.
Senthooran, Ravikumar (2014) Computational Fluid Flow analysis in Cryogenic Turbo expander. BTech thesis.
Seth, P P (2014) Study of Bak-hardening of ultra-low carbon BH 220 steel at different strain rates. MTech thesis.
Sethi, Durjyodhan (2014) Hydrodynamic analysis of different textured profile thrust bearing. MTech thesis.
Sethi, U (2014) Numerical inspection of crack in solid bar using conduction. BTech thesis.
Sethy, R (2014) Experimental investigation and optimisation in EDM process of AISI P20 tool steel. MTech by Research thesis.
Sharma, N (2014) Study of water absorption behaviour of natural fibre reinforced composites. MTech thesis.
Sheelvardhan, K (2014) Analysis and simulation of superconducting magnetic energy storage system. MTech thesis.
Shrivastava, Raj (2014) HTS inductive energy controlled discharging circuit & its application in the design of UPS. MTech thesis.
Singh, A (2014) Processing, characterization and sliding wear behavior of functionalized carbon nanotube reinforced epoxy matrix composite. MTech thesis.
Singh, A K (2014) Analysis of Combustion and Emission Characteristics of a Diesel Engine Fueled With Ethanol as an Alternate Fuel. BTech thesis.
Singh, Abhishek (2014) Effect of pre and post mechanical treatment on pvd coated tools' characteristics and machining performance. MTech thesis.
Singh, Anunay Kumar (2014) Effective thermal conductivity of epoxy matrix composites filled with granite dust. BTech thesis.
Singh, D (2014) Study on feasibility of coir dust as feedstock for entrained flow gasification system. MTech thesis.
Singh, Manas Ranjan (2014) A study on flexible flow shop and job shop scheduling using meta-heuristic approaches. PhD thesis.
Singh, R K (2014) Thermal buckling analysis of laminated composite shell panel embedded with shape memory alloy fibre under TD and TID. MTech thesis.
Singh, Shalini (2014) Experimental investigation and modeling of hot machining operation using high-strength material. MTech by Research thesis.
Sonkar, V (2014) Multi-objective optimization in machining of GFRP and MMC composites: two case experimental research. MTech thesis.
Subudhi , Ashutosh (2014) Modelling of residual stress as a function of temperature in EDM. BTech thesis.
Sudhakar, T (2014) Taylor bubble flow in microchannel having an obstacle. MTech thesis.
Suna, Bhagyashree (2014) Design and Analysis of Laminated Composite Materials. BTech thesis.
Sutar, R (2014) Multi objective optimization of cutting parameters in turning operation using Taguchi method. BTech thesis.
Swain, D P (2014) Supplier selection in risk consideration: a fuzzy based topsis approach. BTech thesis.
Swain, S (2014) Stress analysis of high speed turbomachine. BTech thesis.
Tibrewal, B and Swain, T K (2014) Path planning and control of mobile robot using fuzzy logic. BTech thesis.
Tiwari, Pawan Kumar (2014) Experimental investigation of ethanol fueled partially premixed compression ignition (PPCI) diesel engine. MTech thesis.
Tiwari, R and Sameer, S and P.B.S, S (2014) Tribological behaviour study of ceramic composites. BTech thesis.
Toppo, Krishna Chandra and Rout, Deepak Kumar (2014) Heat transfer enhancement in single micro channel using micro fins. BTech thesis.
Vaikunthbhai, K P (2014) Free Vibration and Buckling Behaviour of Laminated Composite Panel under Thermal and Mechanical Loading. MTech by Research thesis.
Verma, Chuneshwar Lal (2014) Design of an air distribution system. MTech thesis.
Verma, S K (2014) Numerical investigation on the performance of roots blower varying rotor profile. MTech thesis.
Verma, Yogesh (2014) Comparative study between various reduced model and modal analysis of viscoelastic rotors. MTech thesis.
Vinjamuri, Raviteja (2014) Experimental investigation and 3d analysis of combined extrusion-forging process. MTech thesis.
Virendra, M (2014) Non-linear forced vibration study of axially functionally graded non-uniform beams by using Broyden method. MTech thesis.
Yadav, A (2014) Numerical study of axial wall conduction in fully heated microtubes for cryogenic fluid. MTech thesis.
Yadav, Rajiv Kumar (2014) An experimental and simulation study on parametric analysis in turning of inconel 718 and GFRP composite using coated and
uncoated tools. MTech by Research thesis.
This list was generated on Sat Apr 20 14:04:59 2024 IST.
