Number of items at this level: 104.
Kumar, Satish (2013) Study of flexural and compressive strength of glass fiber reinforced graphite composite. BTech thesis.
Baidya , Sudip Sukla (2013) Preparation and Characterization of Hydroxyapatite – Zirconia Composite. BTech thesis.
Ghosal, Samik (2013) Densification and mechanical characterization of pure and doped hydroxyapatite. BTech thesis.
MISHRA, ABHISHEK (2018) Effect of Magnesia and Spinel doping on the Densification
Behaviour and Microstructure of Sintered Alumina. MTech thesis.
A
Agrawal, Nitesh Kumar (2015) Preparation of Ceramic Porous Body Using Different Volume Concentration of Ball Clay & Wheat Flour. BTech thesis.
Anand, Rahul (2022) Evolution of Phase and Nanostructure in Early Transition Metal Doped Polymer Derived Silicon Carbonitride Ceramics. PhD thesis.
B
Badaik, Bikash (2015) Study on Structural and Magnetic Properties of Mn(1-X)ZnxFe2O4 Prepared by Solid-State Reaction Method. BTech thesis.
Bagaria, Vishesh (2012) Processing and study of different properties of
alumina product prepared by Slip Casting. BTech thesis.
Banerjee, Partha (2017) Effect of Simultaneous Addition of Albumin and Yolk on the Porosity and Strength of Alumina Prepared by Gel Casting. MTech thesis.
Barkey, Bijay Kumar (2015) Preparation and Dielectric Measurements of Niobium Pentaoxide Doped Barium Strontium Titanate Glass and Glass Ceramics. BTech thesis.
Baruah, Biswajit (2018) Sintering and mechanical properties of Zr-doped Al2O3. MTech by Research thesis.
Basha, Shaik Akbar (2021) Design, Composition Optimization, Fabrication, and Properties of Al2O3/ZrO2/SrO based Articulating Hip Prosthesis. PhD thesis.
Behera, Pranaya (2010) Study of Filter Press and its Application. BTech thesis.
Behera, S R (2014) The rheological study of slurry containing china clay and ball clay using different deflocculant. BTech thesis.
Behera, Susri Sangeeta (2012) Sol-gel synthesis of borosilicate vitrified bond for Diamond grinding wheel. BTech thesis.
Bhagat, V (2010) Effect of TiO2 as an Additive on the Phase Formation and Densification of Mullite-Zircona Composites. BTech thesis.
Biswal, S (2010) Preparation of Hydroxyapatite Porous Scaffold. BTech thesis.
Biswas, Taniya (2009) Effect of Washing on Strength and Weibull Modulus of Alumina. BTech thesis.
C
Choudhary, Abhisek (2018) Fabrication and Characterization of Preceramic Polymer Derived Macroporous Silicon Oxycarbide. PhD thesis.
Choudhary, Abhisek (2012) Synthesis and characterization of lithium silicate ceramic for the test blanket module (TBM) in fusion reactors. MTech by Research thesis.
Choudhury, Utsarga (2015) Effect of Fly Ash Addition on the Properties of Fired Clay. BTech thesis.
Chowdary, Chava Venkata Appaiah (2018) Sintering Behaviour and Mechanical Properties
of Alumina Doped Zirconia (3YSZ). MTech thesis.
D
Dalei, Bhagyajit (2015) Densification Behavior and Mechanical Properties of Yttrium and Zirconium Doped Alumina Ceramics. BTech thesis.
Das, Gourav (2016) Study of the Effect of Chemical Tempering on Flexural Strength of Soda Lime Silica Glass. MTech thesis.
Das, Pratim (2017) Synthesis and Characterization of Mg and Ti codoped BiFeO3. MTech thesis.
Das, Shibani (2011) Study of decomposition behaviour of binders and the effect of binder type on strength and density of alumina samples. BTech thesis.
Das, Siddharth Sekhar (2015) Preparation & Characterization of Activated Kaolinite. BTech thesis.
Dash, Apurv (2013) Synthesis of Nd:YAG Nanopowder for transparent ceramics. BTech thesis.
Dash, Smruti Rekha (2015) Effect of Fabrication Methods on the Porosity, Microstructure, Strength and In-Vitro Bioactivity of Porous Hydroxyapatite Scaffolds. PhD thesis.
Dixit, Pragya (2018) Fabrication and Characterization of PVDF-Ba0.8Ca0.15Zr0.1Ti0.9O3 (BCZT)
Composite Films. MTech thesis.
Dutta, Debabrata (2011) Utilization of blast furnace slag as a raw material for the manufacture of portland cement clinker. MTech thesis.
E
Ekka, Philomina (2012) Effect of binders and plasticisers on alumina processing. BTech thesis.
Eqbal, Ammar (2018) Development of Highly Anisotropic Porosity in YAG Ceramic by Unidirectional Freeze Casting Method. MTech thesis.
Ezhil Venuswaran , R R (2015) Development Of Porosity Gradient Bioglass Ceramic Scaffold. MTech by Research thesis.
G
Ghosh, Rupita (2018) Study on the Development of Calcium Phosphate based Machinable Bioceramics. PhD thesis.
Gorinta, Jayarao (2018) Development of Li4SiO4-based Ceramics for Solid Breeder and CO2 Absorption Applications. PhD thesis.
Goyal , Lucky (2015) Effect of Clay Sand Ratio on the Properties of Clay Bodies Prepared from Local Clays. BTech thesis.
Gundugolanu, Vijayakumar (2018) Synthesis and Characterization of
Lanthanum doped SrTiO3 (La0.3Sr0.7TiO3)
using Solid State method for SOFC anode
Applications. MTech thesis.
Gupta, Manish Kumar (2015) Phase Analysis and Micro Structure of Zinc Oxide Nanoparticles. BTech thesis.
H
Hansdah, Rajeev (2013) Design and fabrication of permeability apparatus for determination of permeability of porous ceramics. BTech thesis.
J
Joshi, Narayan Dutt (2015) Development of Glaze with Alkali Free Frit. MTech thesis.
Joshi, Samikhya (2009) Synthesis of 
Solid Solution Via Combustion Synthesis Route. BTech thesis.
K
Kaushik, Shubham (2018) Expulsion of Fluoride and Arsenate from Water Solution by Mg/Fe Layered Double Hydroxide. MTech thesis.
Khan, Rahimuddin (2015) Preparation and Characterization of Porous Ceramic Body Using Ball Clay. MTech thesis.
Kochupyloth, Pauljin (2007) Preperation of hydroxyapatie-alumina coated zirconia composites. BTech thesis.
Kujmar, Kundrapu Shyam (2018) Fabrication and Characterization of Porous Mullite
Ceramics. MTech thesis.
Kumar, A (2014) Synthesis and characterization of Ni(OH)2 nanopowders and NiO:8YSZ composites. BTech thesis.
Kumar, Abhay (2013) Design of Centrifugal Casting Experimental Setup for Fabrication of Alumina Tube. BTech thesis.
Kumar, Ajay (2018) Studies on Porous Body of Mgal2o4 Spinel Prepared by Slurry Casting. MTech thesis.
Kumar, Akshay (2013) Synthesis and sintering of alumina precursor powder prepared in hydroxyhydrogel form. BTech thesis.
Kumar, Ankit (2018) Development of Solid-State Derived Strontium Aluminate Based Luminescent Materials. MTech thesis.
Kumar, Sandeep (2015) Effect of TiO2 on Crystallization and Mechanical Properties of Blast Furnace (BF) Slag Based Glass Ceramics. MTech thesis.
Kumar, Sarbajit Sanjat (2014) Dielectric and Piezoelectric Properties of lead free ferroelectric (Ba0.9Ca0.1)(Ti1-xSnx)O3(x=0.06, 0.08,0.1) Ceramics. BTech thesis.
Kumar , Vikash (2015) Effect of Copper Oxide on Dielectric and Magnetic Properties of Substituted Sr-M Hexaferrite. MTech thesis.
Kumari, Akanksha (2012) Synthesis of Bismuth Ferrite and La –doped Bismuth ferrite by auto combustion technique. BTech thesis.
Kumari , Suprita (2013) Effect of nano clay and nano zirconia addition on the properties of Alumina Ceramics. BTech thesis.
L
Lenka, Madhur Kumar (2015) Synthesis and Characterization of Nickel, Cobalt and Ni-Doped Cobalt Hydroxides. BTech thesis.
M
Madhuchhanda, Manali (2015) Preparation and Characterization of Alumina -Strontium Aluminate Based Composite. MTech thesis.
Majhi, Manoj Kumar (2011) Effect of span length on bending strength and Weibull modulus of sintered alumina bar. BTech thesis.
Maji, Kanchan (2017) Gelatin Chitosan And Bioactive Nanoceramic Based Composite Scaffold For Orthopaedic Application. PhD thesis.
Mallik, Rahul Kumar (2012) Synthesis and magnetic properties of cobalt ferrite with different morphology. BTech thesis.
Meena, Deepak Kumar (2016) Preparation and Characterization of (1 − x)MgO.xSrO.Al2O3 (x=0.3, 0.4, 0.5)by Co-precipitation method. MTech thesis.
Meher, Avinash (2015) Preparation and Characterization of Lanthanum Oxide doped Barium Zirconate Titanate (BaZr0.1Ti0.9O3; BZT) Ferroelectric Glass Ceramics. BTech thesis.
Mohan, Sanjay Krishna (2016) Densification and Characterization of Magnesium Aluminate Spinel from Commercial Grade Reactants: Effect of Milling and Additives. MTech by Research thesis.
Mohanty, Debesh Daulat (2011) Effect of Holding time on Binder Burnout, Density and Strength of Green and Sintered Alumina Samples. BTech thesis.
Mohanty, Shyama Prasad (2009) Processing of BiFeO3 Ceramics by Gelcasting. MTech thesis.
Mohapatra, Deepak (2006) Processing of 
Ceramics and Study of its Microstructure, Strength and Thermal Shock resistance. MTech by Research thesis.
Mondal, Trinay (2018) Preparation and Characterization of Sintered Mullite Based Ceramics Using Alumina-Fly Ash Mixture. MTech thesis.
Mondal , Sourav (2015) Adsorption Study of Metal Ions Using Zirconia Nanopowders. BTech thesis.
Murty, Hara Prasad (2012) Development of Porous Bioactive SiO2-Na2O-CaO-P2O5 Glass Ceramic Scaffold. BTech thesis.
N
Nahid, Md (2016) Designing and Fabrication of Shoulder Joint Prototype. MTech thesis.
Nayak, Nadiya Bihary (2017) Borohydride Synthesis for Development of Porous Zirconium Oxide Nanopowders for Novel Applications. PhD thesis.
Nayak, Yougojoti (2010) Hydroxyapatite – TZP Composites: Processing, Mechanical Properties,Microstructure and in Vitro Bioactivity. PhD thesis.
P
Panda, Alok Kumar (2011) Preparation and characterization of Hydroxyapatite-Barium Titanate Composite. BTech thesis.
Panda, Ranjan Kumar (2015) Synthesis and Characterization of Ba0.8Sr0.2TiO3-Co0.8Zn0.2Fe2O4 Multiferroic Composites Prepared by Solid State Reaction Method. BTech thesis.
Patra, Biswajit M (2015) Effect of Cobalt Oxide Addition on Alumina Sintering. BTech thesis.
Patro, Dhirendra Kumar (2015) Phase Evolution, Densification and Dielectric Properties of [KNbO3]1-x[BaNi½Nb½O3-δ]x[x=0.1,0.2] Ferroelectric Ceramics Prepared by Conventional Sintering and Spark Plasma Sintering. BTech thesis.
Purab, Das (2012) Microwave assisted synthesis and characterization fo LSMO: Cobalt ferrite composites. BTech thesis.
R
Rana, Raghunath Prasad (2009) Powder Processing, Densification Behaviour, Microstructure and Mechanical Properties of Al2o3- 50 vol% zro2 Composites. PhD thesis.
S
Sahoo, Soumya Prakash (2016) Effect of Zr and Ti on the Phase Evolution of Silicon Oxycarbide Ceramics. MTech thesis.
Sahu, Swonsl Sitam (2015) Preparation and Characterization of Lanthanum Oxide Doped Barium Strontium Titanate Para Electric Glass Ceramics. BTech thesis.
Sarangi, Abhijeet (2015) Processing of Porous Ceramics Using Natural Foaming Agent. MTech thesis.
Sarath Chandra, K (2017) Processing and Properties Of Polycrystalline Nd:YAG Ceramics. MTech by Research thesis.
Sarkar, D (2007) Synthesis and Thermo-Mechanical Properties of Sol-Gel Derived Zirconia Toughened Alumina Nanocomposite. PhD thesis.
Seth, Prabin Kumar (2015) Synthesis of Zinc Stannate Powder by Solid State Route and Molten Salt Synthesis Method and Their Characterization. BTech thesis.
Sharma, Ankit (2018) Development of Beta-Tricalcium Phosphate Bioglass Composite Scaffold. MTech thesis.
Sharma, Vivek (2015) Study on the Effect of Mno2 as Sintering Additive in Structural, Magnetic and Electrical Properties of Solid-State Derived Ni0.8Zn0.2Fe2O4. BTech thesis.
SiddhardhaSarma, A V (2016) Fabrication and Characterization of Porous Catalyst Support by Gel Casting. MTech thesis.
Singh, Bipin (2007) Preparation and Characteristics of tetragonal phase zirconia using dolomite. BTech thesis.
Singh, P (2010) Effect of La2O3 Addition on Sintering of Alumina. BTech thesis.
Singh, Rahul (2022) Phase, Morphology, And Photoluminescence Characteristics Of Europium Doped Zinc Oxide Nanopowders For Luminescent Applications. PhD thesis.
Singh, Shashwat (2013) Study of the Effect of Different Nucleating Agents
On Lithium Alumino-Silicate Glass-Ceramic System. BTech thesis.
Singh, Vidisha (2015) Phase Evolution and Stability of Aluminum Titanate Prepared by Solid -State Route and Solution Combustion Route. BTech thesis.
Soumya, Devavarapu (2015) Processing of Mullite based Ceramics Using Bauxite-Fly ash Mixture. MTech by Research thesis.
Sowjanya, Chelluri (2022) Studies on the Crystal Structure, Electrical Conductivity and Oxygen Transport Parameter of A0.5Sr0.5Co0.2-xBxFe0.8O3- [A = La, Ba; B = Zn, Al; x = 0 – 0.2] Perovskite Oxides. PhD thesis.
Sowjanya , Chelluri (2015) Processing and Characterization of Porous Alumina Ceramics with Wide Porosity Range. MTech by Research thesis.
Subudhi, Abhijit Kumar (2015) Healing of Crack in Glass by Thermal Tempering Method. BTech thesis.
Surabhi, Soumya (2012) Production of alumina based porous ceramics using naphthalene as the pore former. BTech thesis.
T
Takmeel, Q B (2010) Synthesis Temperature Effect on the stabilization of Tetragonal Zirconia Nanopowders. BTech thesis.
Tanty, Kunal Kumar (2012) Effect of morphology on densification study of nano – hydroxyapatite. BTech thesis.
Thomas, Ashley George (2021) Polymer and Glass-Ceramics Composite Scaffolds for Bone Tissue Engineering. PhD thesis.
Tiwari, Dhirendra Kumar (2017) Preparation and Characterization of Luminescent Magnetic-Ceramic Composite Material. MTech thesis.
W
Warjri, Raja Bipul (2010) Sol-gel synthesis of glass-ceramics using rice husk ash
and its gelcasting. BTech thesis.
Y
Yadav, Amit Kumar (2022) Development of Granular Porous Alumina Adsorbents Using Kaolin for the Mitigation of Excess Fluoride Ions from Aqueous System. PhD thesis.
This list was generated on Sat Nov 9 07:04:21 2024 IST.
