Items where Subject is "Engineering and Technology > Chemical Engineering > Chemical Reactor"
Group by: Creators | Item Type
Number of items at this level: 25.
Bal , Pramod Kumar (2013) Production of 500 Tons per Day of Pure Hydrogen Gas from Refinery Off-Gas Stream. BTech thesis.
Khan, Alisher (2013) Parametric studies on synthesis of Di-benzyl sulfide using H2S and Aliquat-336. BTech thesis.
Kumar, Akash (2013) Kinetics studies in synthesis of dibenzyl sulphide in liquid-liquid-solid mode. BTech thesis.
Mohapatra, Sowhm Swain (2013) Production of Bio-fuel & Bio-char from Sugarcane Bagasse by Thermal Pyrolysis. MTech thesis.
Agrawal, Ankit Kumar (2012) Effect on naphtha yield, overall conversion and coke yield through different operating variables in FCC unit using Aspen-Hysys simulator. BTech thesis.
Behera, Kuldeep (2009) Production of Value-Added Chemicals from Glycerol (A by-product of Biodiesel Industry). BTech thesis.
Behera, Nayana (2009) Treatment of Industrial Effluents in a Bioreactor. BTech thesis.
Bhoi, S K (2010) Adsorption Characteristics of Congo Red Dye onto PAC and GAC based on S/N ratio:A Taguchi Approach. BTech thesis.
Champati, Debabrata (2014) A detailed study of effect of process parameters on Reduction of Metachloronitrobenzene (MCNB) using Hydrogen sulphide and Phase Transfer Catalyst. BTech thesis.
K, S Kumar (2010) Extraction of Essential Oil Using Steam Distillation. BTech thesis.
Khandeparker, Ashish (2012) Study of different operating parameters of fcc unit with aspen-hysys. BTech thesis.
Kumar, N (2010) Experimental Studies on Conversion of Waste Polystyrene to Styrene and Liquid Fuel. BTech thesis.
Kumar, S (2010) Conversion of Food Wastes to Useful Chemicals/Products. BTech thesis.
Mahaling, Kumuda Ranjan (2013) Synthesis of dibenzyl sulphide by using PEG-6000 as a green catalyst. BTech thesis.
Maity, S K (2007) Multiphase Reactions (Utilization of Hydrogen Sulfide For the Production of Value-Added Chemicals). PhD thesis.
Meher, Bidhu Bhusan (2011) Hydrodynamic Characteristic Study of a Three Phase Co-current Trickle-bed Reactor: CFD analysis. BTech thesis.
Nagarjun, S. (2013) Kinetics of Reaction of Benzyl Chloride with H2S-Rich Aqueous Monoethanolamine Under Liquid-Liquid-Liquid Phase-Transfer Catalysis. MTech thesis.
Pradhan, Kuldeep (2012) Simulation of fluid catalytic cracker. BTech thesis.
Reddy, E. Harikishan (2008) Target identification and drug design for human pathogen chlamydophila pneumoniae -in silico analysis. MTech thesis.
Sahoo, A G (2014) A decision support framework towards benchmarking of enterprise (supply chain) agility: an empirical research. BTech thesis.
Sahoo, Brahmotri (2011) The effect of parameters on the performance of a Fluidized bed reactor and Gasifier. MTech thesis.
Sharma, A (2010) Liquefaction of Low Density Polyethylene to Useful Products. BTech thesis.
Srinivas , Thadela (2013) Effect of Process Parameters on Conversion and Selectivity for the Synthesis of Dibenzyl Sulfide Using Hydrogen Sulfide and Solid Reusable Tri-Phase Transfer Catalyst. MTech thesis.
Tripathy, Rajesh (2013) Production of Hydrogen Gas from Biomass Wastes Using Fluidized Bed Gasifier. MTech by Research thesis.
Yadaw, Vishnu Prasad (2010) Study on Esterification of Ethylene Glycol With Acetic Acid in the Presence of Seralite SRC-120 and Molecular Sieve 13X Catalyst. MTech thesis.