Items where Subject is "Engineering and Technology > Mechanical Engineering > Computational Fluid Dynamics"
Group by: Creators | Item Type
Number of items at this level: 133.
Duwary, Bijoy Kumar (2013) Liquid drop movement over an inclined surface using Volume of Fluid model with finite volume method. BTech thesis.
Kumar, Motish (2013) Numerical study of axial wall conduction in partially heated microtubes. MTech thesis.
Nayak, Sukanta (2013) Dynamics of Liquid Droplet on Flat Plate under Shear Flow with Adiabatic Condition. MTech thesis.
Panigrahi, Suseet (2013) Liquid drop dynamics under the effect of an induced horizontal wettability gradient. BTech thesis.
Shreshth, Sandeep (2013) Lattice Boltzmann Method for Single Phase Heat Transfer and Two Phase Drop & Bubble Dynamics. MTech thesis.
Singh , Ashutosh Kr (2013) Numerical Analysis of Performance of Closed-Loop Pulsating Heat Pipe. MTech thesis.
., Gagandeep (2015) Dynamics of Bubble and Drop in Multiphase Flow through Numerical Simulation. MTech thesis.
Abhinav, K (2015) Recharging of a Rectangular Microchannel over a Span to Increase Heat Transfer. BTech thesis.
AD, Thirumuruga and Das, Paramita (2010) CFD Modelling of a flat plate. BTech thesis.
Arora, Shashank (2018) Thermo-Hydrodynamics Analysis of Offset Fin in Compact Heat Exchanger using ANSYS Fluent. MTech thesis.
Azad, Prashant Kumar (2015) Study of Blast Furnace Stave Cooler Based on Heat Transfer Analysis. MTech thesis.
Azaruddin, Mohammad (2015) Numerical Simulation of Heat Transfer in Microchannel with Twisted Tape Insert. MTech thesis.
Banik, Ashish (2017) Turbulent Natural Convection in a Three Dimensional Enclosure With Triangular Roof. MTech thesis.
Behera, Akhilesh (2015) CFD Analysis of Matrix Cooling Method in Gas Turbine Blades. BTech thesis.
Behera, Alok Narayan (2015) Heat Transfer in Pulsatile Flow Through Square Microchannels With Wavy Walls. MTech thesis.
Behera, Ranjit (2016) CFD Analysis of Aerostatic Bearing for Cryogenic Turbo-Expander. MTech thesis.
Behera, Sameer Kumar (2014) Heat transfer analysis of blast furnace stave cooler. MTech thesis.
Behera, Siddhartha Shankar (2013) CFD analysis of heat transfer in a helical coil heat exchanger using fluent. BTech thesis.
Bhagat, Pramod Kumar (2015) Optimization of Refractory Lining Used In Blast Furnace. MTech thesis.
Bhansali, Pratik Santosh (2018) Optimisation of Purge Seal for Turbopump. MTech thesis.
Bharti, Reetu (2016) Thermal Analysis of Cryogenic Rocket Thrust Chamber with Regenerative and Film Cooling. MTech thesis.
Bhoi, Tankadhar (2016) CFD Analysis of Maldistribution in Mini-channel Heat Exchanger. MTech thesis.
Bhola, Deepak Ranjan (2011) CFD analysis of flow through venturi of carburetor. BTech thesis.
Biswal, Hitesh Kumar (2015) Numerical Study of Heat Transfer Characteristics of a Channel with Triangular Wall. BTech thesis.
Bondada , Vinay (2018) Effect of Magnetic Field on MRR and surface Roughness in Electrochemical Machining. MTech thesis.
Chakradhari, Horaj (2016) Numerical Simulation Of Chilldown in LN2 Transfer Line. MTech thesis.
Chanda, Sajal (2016) Heat Flow Analysis of “Bell Less Top Gear Box” of Blast Furnace. MTech thesis.
Chhotray, Animesh (2019) Balanced Postural Control and Path Planning Analysis of a Two-Wheeled Mobile Robot Using Various Soft Computing Techniques. PhD thesis.
Dalai , Sisir Kumar (2013) Numerical analysis of diaphragm type pulse tube refrigerator. MTech thesis.
Damu, Sapkale Vinod (2015) Numerical Investigation of Heat Transfer Enhancement in Corrugated/Wavy Channel. MTech thesis.
Das, Ananta Kumar (2015) Phase‐Split in Two‐Phase Flow through T‐Junction. MTech thesis.
Das, Soumyajit (2015) CFD Modeling and Optimization of Magneto-rheological Abrasive Flow Finishing (MRAFF) Process. MTech thesis.
Deorah, Shashank (2012) CFD Analysis of a vertical tube having internal fins for
Dewangan, A (2014) Numerical investigations of flooding for two-phase counter-current flow. BTech thesis.
Dimri, Hitesh (2013) Computational Fluid Flow Analysis of Cryogenic Turboexpander. MTech thesis.
Farooqui, Mohammed Rayed (2015) Numerical Study on Effect of Rectangular Shaped Ribs Arranged in Different Patterns on Thermal Performance of a Solar Air Heater Duct. MTech thesis.
Francis, Abel Christena (2017) Numerical Simulation of Dual Bell Nozzle for Rocket Engines. MTech thesis.
Gautam, C K (2014) Numerical investigation on the performance of inertance tube pulse tube refrigerator by varying compressor amplitude. MTech thesis.
Ghosh, Dibyendu (2016) Phase Separation Phenomena Through Tee Junction. MTech thesis.
Gupta, Amit (2015) Conjugate Heat Transfer in a Converging Microchannel. BTech thesis.
Gupta, Amit Kumar (2017) Phase Splitation Through T-Junction. MTech thesis.
Gupta, Prashant (2018) Studyon Thermal Characteristics of Epoxy Composites Filled with Micro Size Rutile Particles. MTech thesis.
Janghel, Mithilesh Kumar (2015) An Experimental Study of Hydraulic Jump Due to Moving Jet Impingement. MTech thesis.
Jena, Prabir kumar (2009) Analysis of Combined Conductive and Radiative Heat Transfer in a Two Dimensional Square Enclosure using the Finite Volume Method. MTech thesis.
Jhunjhunwala, Pooja (2013) CFD analysis of helically coiled tube for compact heat exchangers. MTech thesis.
Jishnu, M (2015) Entrainment Phenomenon in Stratified Liquid Layers by Imposing Rotary Motion. MTech thesis.
Kanungo, S (2014) Numerical analysis to optimize the heat transfer rate of tube-in-tube helical coil heat exchanger. MTech thesis.
Katendra, Gaurav (2013) Prediction of coating thickness through thermal analysis. MTech thesis.
Kawade, Ajay (2013) Mobility of air bubble entrapped through jet impingement. MTech thesis.
Khandual, Abinash (2016) CFD Analysis of Stirling Type Inertance Tube Pulse Tube Refrigerator. MTech thesis.
Koshti, Krushna Devidas (2017) Numerical Study for Subcooling of Liquid Nitrogen in GM Cryocooler. MTech thesis.
Kujur, Anjuni (2016) CFD Simulation of Inertance-Tube Pulse Tube Refrigerator with Variable Cross Section of Regenerator and Pulse Tube. MTech thesis.
Kumar, B M (2014) Numerical investigation on the performance of inertance tube pulse tube refrigerator varying compressor frequency. MTech thesis.
Kumar, Chandan (2017) Studies on a Shell and Tube Heat Exchanger Using CFD. MTech thesis.
Kumar, Durgesh (2016) Thermal Analysis of Blast Furnace Stave Cooling. MTech thesis.
Kumar, Pankaj (2009) Numerical Investigation of Fluid Flow and Heat Transfer in Microchannel. MTech thesis.
Kumar, Pankaj (2019) Analysis of Pulse Tube Refrigerator using CFD. PhD thesis.
Kumar, Priyadarshi Biplab (2019) Motion Planning Strategies for Humanoid Robots Using Computational Intelligent Techniques with Computer Vision Assistance. PhD thesis.
Kumar, Sandeep (2015) CFD Analysis of Film Cooling in Gas Tusrbine Blade. BTech thesis.
Kumar , Anshuman (2018) Effects of Cryo-Treatment on the Cut Qualities of Ti-6al-4v Eli Alloy During Wire-Edm Operation. MTech thesis.
Kumar , Kamlesh (2017) Design and analysis of Cold Box for Helium Liquefier / Refrigerator. MTech thesis.
Kumar , Niraj (2013) Study of Sloshing Effects in a Cylindrical Tank With and Without Baffles under Linear Acceleration. MTech thesis.
Kumar , Sumit (2011) Analysis of radiative heat transfer in an absorbing-emitting-scattering medium using fluent. MTech thesis.
Lahare, Pushpendra Bahadur Singh (2016) Analysis of Rectangular Channel Printed Circuit Heat Exchanger(PCHE). MTech thesis.
M, Baburaj (2012) CFD Analysis of Flow Pattern in Electrochemical Machining for L-Shaped Tool. MTech thesis.
M, Vishnu (2015) Numerical Simulation of Helical Coil Tube in Tube Heat Exchanger with Baffles. MTech thesis.
M K, Santhosh Kumar (2009) CFD Analysis of Natural Convection in Differentially Heated Enclosure. MTech thesis.
Manna, Vivek (2015) Numerical Simulation of Air-Lift Pump. BTech thesis.
Meher, Bijaya Kumar (2015) CFD Analysis of a Pulse Tube Cryocooler. BTech thesis.
Mishra, Aman (2016) CFD Analysis of Shell and Tube Heat Exchanger with Segmental Baffles. MTech thesis.
Mishra, Itishree (2017) Thermal Analysis of Stave Cooler Near Tap Hole Zone. MTech thesis.
Mishra, P (2014) Thermo-hydrodynamics of pulsating laminar flow in a microtube: a numerical study. MTech thesis.
Mishra, Praveen (2016) Hydrodynamics of Drop in an Inclined Plane. MTech thesis.
Mishra, Siddhanta (2016) Numerical Simulation of Solidification of NH4Cl-H2O Binary Mixture. MTech thesis.
Mishra, Subhransu Kumar (2009) Melting and Solidification of Binary Alloy Subjected to Cyclic Temperature and Heat Flux Boundary Condition. BTech thesis.
Mishra , Vivek Kumar (2018) Development of A Test Facility and Measurement of Performance of A Three Stream (He/He/He) Plate Fin Heat Exchanger. MTech thesis.
Mohanty, Sabyasachi (2015) Effect of Obstacle-Size on the Flow Structure of Two-Phase Flow Through Enlarging Channel. BTech thesis.
Mohanty, Soumya Ranjan (2013) CFD analysis of heat transfer in a helical coil heat exchanger using fluent. BTech thesis.
Naik, Lalit Ranjan (2014) CFD analysis of heat transfer in a helical coil heat exchanger with constant heat flux boundary condition. BTech thesis.
Nandy, Ajoy Kumar (2014) Heat transfer analysis of blast furnace refractory lining. MTech thesis.
Nayak, Anshul Abhijit (2015) Modelling, Simulation and Experimental Investigation for Generating ‘I’ Shaped Contour Using Electro Chemical Machining. BTech thesis.
Nayak, Swadesh Kumar (2015) CFD Analysis of Flow Pattern in Electrochemical Machining Process. BTech thesis.
Nema, Puneet Kumar (2014) Computational study of sloshing behavior in 3-D rectangular tank with and without baffle under Seismic Excitation. MTech thesis.
Pagidipalli, Bhanu Chandar (2018) Numerical Analysis of Pulse Tube Refrigerator using Mixture of Gases as the Working Fluid. MTech thesis.
Pal, Lipsa (2016) Numerical Study of Flow Over a Projectile. MTech thesis.
Pal, Ram Kumar (2016) Thermo-Hydrodynamic Study of Subcooled and Critical Heat Flux Flow Boiling. MTech thesis.
Panda, Deepak (2015) Computational Fluid Dynamics of Airfoil Sections. BTech thesis.
Parida, Gati Ranjan (2018) Heat Transfer and Flow Friction Characteristics of Rectangular Plain Fin Heat Exchanger. MTech thesis.
Patnaik, Yugesh (2015) CFD Analysis of RIB Turbulated Cooling in Gas Turbine Blades. BTech thesis.
Patro, Brundaban (2014) Eulerian modeling of gas-solid multiphase flow in horizontal pipes. MTech by Research thesis.
Patro, Jatin Kumar (2015) Numerical Simulation of Inertial Entrainment Phenomenon. BTech thesis.
Pradhan, Chandrakant (2016) Entrainment through Rotation in Multiphase System. MTech thesis.
Prasad , Rajeev R (2014) Axial Conduction in a Partially Heated Microchannel Subjected to Isothermal Boundary Condition. MTech thesis.
Pratap, Raghvendra (2016) Design of Turbine Blade of Turboexpander for Helium Liquefaction. MTech thesis.
Purohit, Saswat (2017) Design and Analysis of Diffuser for Helium Turboexpander. MTech thesis.
Raghav, G H (2014) Numerical analysis of hydraulic jump by an impinging jet. MTech thesis.
Rajesh Kumar, V (2015) Conjugate Heat Transfer in Diverging Microchannels. BTech thesis.
Rath, Usharani (2013) Two phase flow analysis in electrochemical machining for L-shaped Tool: A CFD approach. MTech thesis.
Rose, B (2014) Thermo-hydrodynamics of single phase flow in microchannel with obstacles. MTech thesis.
Sahoo, Debiprasad (2016) Pulsatile Flow in A Helically Coiled Tube-in-Tube Heat Exchanger. MTech thesis.
Sahoo, L (2014) CFD analysis of heat transfer in a helical coil heat exchanger with constant wall heat transfer coefficient. BTech thesis.
Sahoo , Gunamani (2018) Design Calculation of Compact Plate and Fin Type of Heat Exchanger for Helium Liquefaction System. MTech thesis.
Sahu, A B (2010) CFD Simulation of a Small Stirling Cryocooler. BTech thesis.
Sahu, Mrutyunjaya (2009) Study on Boundary Shear Stress Distribution in Meandering Trapizoidal Open Channel Flow. BTech thesis.
Sain, Suresh (2011) CFD analysis of flow pattern in electrochemical machining. BTech thesis.
Samantra, Chitrasen (2015) Studies on Risk and Occupational Health Hazards in Industrial Context: Some Case Research. PhD thesis.
Sanwal, Shantanu (2016) Turbulent Natural Convection in an Enclosure With a Triangular Roof with Different Inclination Angles. MTech thesis.
Satapathy, A K (2014) Numerical simulation of slip flow heat transfer in a microtube. MTech thesis.
Sethi, Himansu Sekhar (2015) Finite Element Modeling and Analysis of Nanocomposite Airfoil Structures. MTech thesis.
Sethi, U (2014) Numerical inspection of crack in solid bar using conduction. BTech thesis.
Sethi , Sandeep (2013) CFD analysis of single phase flows inside vertically and horizontally oriented helically coiled tubes. BTech thesis.
Shariq, Sk Avez (2016) A CFD Simulation of High Altitude Testing of the Cryogenic Engine. MTech thesis.
Shevkar, Prafulla Prakash (2016) Thermo-Hydrodynamics of Heat Transfer Enhancement During a Gas-Liquid Taylor Bubble Flow in a Mini/Microchannel. MTech thesis.
Siddiqui, Mohammad Tabish (2018) Study of Sloshing Force in 3-D Rectangular Tank with and without Baffles Under Linear Acceleration. MTech thesis.
Sreevathsanath, Kolli Surya (2013) Study of various parameters in diesel-generator sets. BTech thesis.
Sudhakar, T (2014) Taylor bubble flow in microchannel having an obstacle. MTech thesis.
Sureka, Yogesh (2016) Numerical Simulation of Heat Transfer Mechanism in a ‘V’ Type Corrugated Channel. MTech thesis.
Suyal, Rohit (2016) CFD Analysis of Fuel Sloshing in a Cylindrical Tank with and Without Baffles Under Linear Acceleration. MTech thesis.
Swain, Priyadarshi Tapas Ranjan (2018) Mechanical, Thermal and Tribological Behaviour of Surface Modified Jute Fiber Reinforced Epoxy Composites. PhD thesis.
Thejavath, Mangilal (2015) CFD Analysis and Optimization of Process Parameters of Abrasiveflow Machining. MTech thesis.
Thomas, Basil George (2016) Thermo-Hydraulic Simulation of Oxidizer Booster Turbopump for Semicryogenic Engine. MTech thesis.
Tiwari, Nishant (2017) Recovery of Waste Heat from Pyrolysis Reactor. MTech thesis.
Tom, Sachin (2016) Numerical Study of Turbulent Natural Convection in an Enclosure with Conjugate Heat Transfer. MTech thesis.
Toppo, Krishna Chandra and Rout, Deepak Kumar (2014) Heat transfer enhancement in single micro channel using micro fins. BTech thesis.
Verma, S K (2014) Numerical investigation on the performance of roots blower varying rotor profile. MTech thesis.
Verma, Vikas Kumar (2017) Numerical Study of Porous Parabolic - Finned Receiver for Solar Parabolic- Trough Concentrator. MTech thesis.
Wadile, Prasad P (2015) Numerical Study of Laminar Natural Convection in an Enclosure with Conjugate Heat Transfer. MTech thesis.
Wasim , Khan Rehan (2013) Slip flow in microchannels. MTech thesis.
Yadav, A (2014) Numerical study of axial wall conduction in fully heated microtubes for cryogenic fluid. MTech thesis.
Yadav, Shivam (2015) Study of Shear Stress on the Surface of an Obstacle Attached to Wall of a Narrow Channel. BTech thesis.
Yadav , Surendra Prasad (2018) Study on Effective Thermal Conductivity of Fiber Reinforced Epoxy Composites. MTech thesis.