Items where Subject is "Engineering and Technology > Chemical Engineering > Chemical Process Modeling"
Group by: Creators | Item Type
Jump to: Thesis
Number of items at this level: 68.
Biswas , Ritam (2013) Removal of methylene blue dye using oil cake (karanja). BTech thesis.
Kattamuri , Venkatesh (2013) Process Flow Sheet Simulation of Hydrogen Production Using Sulfur-Iodine Cycle. BTech thesis.
Pradhan, Debalaxmi (2011) Recovery of value added fuels from waste polyolefins bicycle tyre and tube. MTech by Research thesis.
Agir, Sujeevan Kumar (2019) Detection and Quantification of Arsenic in Contaminated Drinking Water Using Electronic Tongue. PhD thesis.
Ansari, Mazhar Husain (2013) Simulation of effects of various parameters in solid waste gasification in a fixed bed reactor. BTech thesis.
Arora, S (2014) Simulation study of divided wall distillation column. BTech thesis.
Ayyalusamy, Sureshkumar (2019) Preparation and Characterization of Activated Carbon from Post-consumer Polyethylene terephthalate Bottles and its Applications in Carbofuran Detection and Removal. PhD thesis.
Bala , Pritam Kumar (2015) Steady State Simulation of Extractive Distillation System Using Aspen Plus. BTech thesis.
Bandpatte, Sagar Chandu (2013) Application of LQR and MPC on Distillation and Batch Crystallization Process. MTech thesis.
Barman , Ghanshyam (2011) Congo Red (cr)Removal from Aqueous Solution by Commercial and Laboratory Prepared Low Cost Adsorbents Using Adsorption. MTech thesis.
Behera, Managobinda (2010) Vapour Liquid Equillibrium Modeling Using UNIFAC Group Contribution Method And Its Application In Distillation Column Design And Steady State Simulation. BTech thesis.
Behera, Ranjit (2014) Adsorption studies of malachite green using activated carbon
Bhatia, Jasmeet Singh (2013) Performance Analysis of Circulating Fludized Bed Biomass Gasifier: Aspen Simultaion. BTech thesis.
Biswal, Nihar Ranjan (2012) Studies on Adsorption and Wetting Phenomena Associated with Solid Surfaces in Aqueous Synthetic and Natural Surfactant Solutions. PhD thesis.
Chauhan, Apoorv Singh (2016) Construction Sites Safety in India: An Assessment Through Eyes of Workers. MTech thesis.
Choudhary , Sanjana Anand (2015) Simulation Analysis of A Propane Recovery Plant from Using ASPEN PLUS. BTech thesis.
D., Seshu Kumar (2018) Devising Numerical Methods for Simulation, Identification and Control of Fractional Order Processes. PhD thesis.
Garapati, Vamsi Krishna (2012) Biodegradation of Petroleum Hydrocarbons. MTech by Research thesis.
Gautami , G (2011) Modeling and simulation of multiple effect evaporator system. MTech thesis.
Javaji, S K (2009) Study of Dynamic Behavior of Ethyl Acetate Reactive Distillation Column Using ASPEN PLUS. BTech thesis.
Jha, Preeti (2017) Two Stage Synthesis of Aromatic Thioethers using Hydrogen Sulfide and Reusable Phase Transfer Catalyst. PhD thesis.
Kaushikaram, K S (2010) Partial Least Squares and Neural Network Based Identification of Process Dynamics & Design of Neural Controllers. BTech thesis.
Korumilli, Tarangini (2015) Studies on Pigment Production by Microorganisms Using Raw
Kulkarni, Vaibhav V (2016) Carbon Dioxide Appropriation Using Alkanolamine Blends: Vapor-Liquid Equilibrium Modelling Approach. MTech thesis.
Kumar, Ashish (2009) Development of Mixed Integer Non-Linear Model for Hydrogen Distribution in them Refinery. BTech thesis.
Kumar, S (2010) Modelling and Simulation of Ethyl Acetate Reactive Distillation Column using ASPEN PLUS. BTech thesis.
Kumar, Sushil (2015) Life Cycle Assessment of the Process Steam Reforming of Methane(SMR). BTech thesis.
Kumar, Vikas (2020) Extraction and Recovery of Various Wastewater Contaminants Using Liquid Membrane Techniques. PhD thesis.
Kumari, Saroj (2017) Hydrogen Sulfide Capture and Utilization: Multiphase Catalysis in Synthesis of Symmetrical Aromatic Sulfides. MTech by Research thesis.
M, A Kumar (2010) Modelling the Hydrodynamic Characteristics of Gas-Liquid-Solid Fluidized Bed using Artificial Neural Networks. BTech thesis.
Mahapatra, Dibya Lochan (2009) Modeling of Fluid Phase Equilibria by PC-Saft EOS: Solubility of Gases/Vapor in Polythylene. BTech thesis.
Mahapatra, N (2010) Design and Simulation of Cumene Plant using Aspen Plus. BTech thesis.
Maity, S K (2003) Modeling and Simulation of Solid-Liquid Equilibrium by Perturbed-Chain Statistical Associating Fluid Theory. MTech thesis.
Mishra, D P (2014) Simulation of carbon dioxide - monoethanolamine - water system using equilibrium approach. BTech thesis.
Mishra, Sambhurisha (2013) Hydrodynamic Studies of Three-Phase Fluidized Bed by Experiment and CFD Analysis. MTech by Research thesis.
Modi, Sourav (2011) Application of UNIQUAC model in modeling VLE of
Moghekar, Deepak (2008) Project Report On Modeling and simulation of gas-liquid interfacial area in three phase fluidized and semi-fluidized bed. MTech thesis.
Mohanty, V (2014) Simulation of methyldiethanolamine-carbon dioxide-water system
Mohapatra, Swaraj (2010) Classification of Electrocardiogram Waveforms Using PNN. BTech thesis.
Mondal, Ujjal (2017) Chemoselective Reduction of Nitroarenes using Hydrogen Sulphide under Phase Transfer Catalysis. PhD thesis.
Nemani, Kameswari Mani Priyanka (2015) Simulation of Continuous Stirred Tank Reactors (CSTR’s) Using Orthogonal Functions. MTech thesis.
Pandey, Meenakshee (2013) Lipase catalysed hydrolysis of non-conventional oil resources: kinetics & optimization study. MTech by Research thesis.
Parihari, Arati (2009) Performance Study of Spray Dryer Using Various Salt Solutions. MTech by Research thesis.
Patel, Bhishma (2015) Microbial Degradation of Chlorophenols in Batch and Continuous Bioreactors: Kinetic Study and Optimization of Process Parameters. PhD thesis.
Pati, A (2014) Simulation and modelling of divided wall distillation column by programming design equations using MATLAB. BTech thesis.
Patra, R (2014) Rate studies on monoethanolamine-carbon dioxide-water system. BTech thesis.
Pradhan, Kuldeep (2012) Simulation of fluid catalytic cracker. BTech thesis.
Purbia, Rahul (2018) Sustainable Synthesis of Multifunctional Nanomaterials for Sensing and Catalytic Applications. PhD thesis.
Raja, Kintali Vivek (2015) Optimization of Biodiesel Production using Aspen Plus. BTech thesis.
Raosaheb, Parkhe Shashank (2015) Steady State Simulation of an Azeotropic Distillation System Using Aspen Plus. BTech thesis.
Ravindra, Vutukuru (2014) Design,Development and Testing of Nb-Ti Superconducting Magnet & Creation of Liquid Helium Test Facility. MTech by Research thesis.
Ray, Minaketan (2012) Synthesis and characterization of AgBr/SiO2 core/shell nanoparticles. MTech by Research thesis.
Ritanjali, Sushree Ritu (2018) Synthesis and Characterization of Anisotropic Nanostructures of Noble Metals (Au, Ag) for Enhanced Optical and Catalytic Applications. MTech by Research thesis.
S, Sivamani (2019) Nanoscale Zeolite from Low-Cost Resources: Synthesis, Optimization and Application in Wastewater Treatment. PhD thesis.
Saleh, Abdullah (2011) Study Of The Performance Of Batch Distillation Using gPROMS. BTech thesis.
Sambit, S (2014) Simulation and flow analysis through a straight pipe. BTech thesis.
Sethy , Amit (2013) Preparation of oxalic acid from molasses. BTech thesis.
Sikder, Sayantani (2018) Abatement of Chromium (VI) and Mobilization of Selected Pollutants Including Cr(VI) in Aquatic Food Chain. MTech by Research thesis.
Singh, Gaurav (2016) Phase Transfer Catalyzed Synthesis of Organosulfur Fine Chemicals using Hydrogen Sulfide. PhD thesis.
Singh , Anil Kumar (2013) Classification of Flow Regimes Using Linear Discriminant Analysis (LDA) and Support Vector Machine (SVM). MTech thesis.
Swapnasrita, Sangita (2016) Prediction of Properties of Fluids by Molecular Simulation Techniques. MTech thesis.
Tenneti, Srinivas (2015) Design of Auto Mix Single Stage Anaerobic Digester and Aspen Plus Simulation for Biogas Production. MTech thesis.
Tripathi, Nagesh Kumar (2012) Production, Purification and Characterization of Recombinant Viral Proteins. PhD thesis.
Varghese, Soniya Mariya (2018) Development of Functionalised Nano-catalysts for Enhanced Catalytic/photo-catalytic Applications. MTech thesis.
Venumadhav, Penta (2015) Design of A Plant to Produce 5 Ton per Day Liquid Fuel from Waste Plastic (Low Density Polyethylene). BTech thesis.