Items where Subject is "Engineering and Technology > Chemical Engineering > Process Design"
Group by: Creators | Item Type
Number of items at this level: 30.
Bal , Pramod Kumar (2013) Production of 500 Tons per Day of Pure Hydrogen Gas from Refinery Off-Gas Stream. BTech thesis.
Kattamuri , Venkatesh (2013) Process Flow Sheet Simulation of Hydrogen Production Using Sulfur-Iodine Cycle. BTech thesis.
Reddy , Kotha Pruthvi (2013) Process Fault Analysis Using Signed Directed Graphs and Fuzzy Logic. BTech thesis.
Singh , Gaurav (2013) Implementation of Traditional and Non-Traditional Optimization Algorithms for Heat Exchanger Design. BTech thesis.
Agrawal, Ankit Kumar (2012) Effect on naphtha yield, overall conversion and coke yield through different operating variables in FCC unit using Aspen-Hysys simulator. BTech thesis.
Behera, Ambika Prasad (2018) Laminar Jet Cooling with Surfactant: A Novel Methodology to Enhance Quenching by Augmenting Stagnation and Parallel Zone Length. MTech thesis.
Behera, Managobinda (2010) Vapour Liquid Equillibrium Modeling Using UNIFAC Group Contribution Method And Its Application In Distillation Column Design And Steady State Simulation. BTech thesis.
Biswal, Manish (2015) Design, Optimization and Techno-Economic Feasibility Study of Absorption Refrigeration System Using Ammonia + Water As Working Pair. BTech thesis.
Chaluvadi, Suresh (2021) Studies on Dry and Wet Torrefaction of Sugarcane Bagasse to Maximize the Recovery of Sugars and Bioethanol Yield. PhD thesis.
Dash, Sidhant (2015) Design and Analysis of Absorption Refrigeration System Using [EMIM [OTF] +H2O]. BTech thesis.
Dutta, Jayita (2018) Emphasizing Safety in Industrial Context: Some Case Studies of MCPI Private Limited. MTech thesis.
Jyoti, Ghoshna (2012) Design of heat integrated multiple effect evaporator system. MTech thesis.
Kumar, Sushil (2015) Life Cycle Assessment of the Process Steam Reforming of Methane(SMR). BTech thesis.
Kumar, Vikas (2020) Extraction and Recovery of Various Wastewater Contaminants Using Liquid Membrane Techniques. PhD thesis.
Mohanty, Soumya Ranjan (2015) Design, Optimization and Economic Feasibility of Absorption Refrigeration System Using (Lithium Bromide + Water) as Working Pair. BTech thesis.
Pradhan, P K (2014) Simulation and economic analysis of crude distillation unit using aspen plus. BTech thesis.
Raja, Kintali Vivek (2015) Optimization of Biodiesel Production using Aspen Plus. BTech thesis.
S R, Shubham (2011) Wastewater minimization using aspen water. BTech thesis.
Sabde , ShrirangVishwanth (2013) Management of Industrial Solid Waste by Utilizing as an Adsorbent for Methylene Blue Removal. MTech thesis.
Sahoo, Prasanna Kumar (2011) Production of ethylbenzene by liquid-phase benzene alkylation. BTech thesis.
Sahu, Pooja (2017) Studies on Energy Integration for Modification in Existing Sponge Iron Plant. MTech thesis.
Sahu, Saurav Kumar (2011) Design of waste heat recovery system in a sponge iron plant. BTech thesis.
Sainath, Garimella Venkata (2016) Hazard Operability Study for Blast Furnace and
Senapati, Rajendra Kumar (2015) Design and Analysis of Absorption Refrigeration System Using H2o + [EMIM] [TFA]. BTech thesis.
Sethi, S (2014) Plant design for microbial treatment of waste water with advanced oxidation process. BTech thesis.
Sethy , Amit (2013) Preparation of oxalic acid from molasses. BTech thesis.
Singh, Saurabh (2009) Manufacture of Oxygen by Linde Frankl's process. BTech thesis.
Tenneti, Srinivas (2015) Design of Auto Mix Single Stage Anaerobic Digester and Aspen Plus Simulation for Biogas Production. MTech thesis.
Tewari, Krishna (2011) Design of Cumene Plant using Aspen Plus. BTech thesis.
Tiwari, Priyanka (2011) Thermodyamic, ecoomic analysis and desiging of heating system for the swimming pool present at NIT rourkela. BTech thesis.