Items where Subject is "Engineering and Technology > Metallurgical and Materials Science"
Group by: Creators | Item Type
Jump to: Thesis
Number of items at this level: 55.
T.M , George Lenin (2014) Development of iron-iron carbide composite by planetary milling and conventional sintering. MTech thesis.
Akarapu, Ashok (2011) Surface Property Modification of Copper by Nanocomposite Coating. MTech thesis.
Anandatheerthan, J and Kumar, Sudipt (2008) Production and Characterisation of Aluminium-Fly ash composite using Stir Casting Method. BTech thesis.
Arvind, K (2009) J-R Behaviour of 20MnMoNi55 Pressure Vessel Steel. MTech thesis.
Behera, Akhya Kumar (2020) Electro-Formation of Cu-Graphene Composites and Its Property Evaluation. PhD thesis.
Behera, Balaram Bijayakumar and Prasad, Neeraj Vimal (2007) Erosion wear of materials. BTech thesis.
Bose, Abhisek and Roy, Dinkar (2007) Effect of coalchar reactivity & reduction temperature on the reduction behaviour of iron ore. BTech thesis.
Dalai, Biswajit (2015) CFD Modelling of Heat Transfer in Blast Furnace. BTech thesis.
Damanapeta, Narsimhachary (2020) Laser Weld-Brazing of Aluminum Alloy (AA6082/AA5083) And Galvanized Interstitial Free Steel with an Emphasis On Fatigue and Corrosion Study. PhD thesis.
Dash, Khushbu (2014) Processing and characterization of Cu-Al2O3 and Al-Al2O3 composites: an evaluation for micro- and nano- particulate reinforcements. PhD thesis.
Divya Bharathi, K (2015) Fatigue- Ratcheting Interaction Behavior of AISI 4340 Steel. MTech by Research thesis.
Dutta, Surajeet Kumar (2008) Study of the Chemical Composition and Energy value of Woody Biomass Species. BTech thesis.
Gaur, Ankur (2009) Effect of Strain Ageing On Welded or Nonwelded Low Carbon Steel. BTech thesis.
Goyal, Gaurav Kumar and Das, Braj Sundar (2008) Effect of Hygrothermal Treatment on the Tensile Properties of Hot-Pressed Jute Fibre Composites. BTech thesis.
Gupta, Mukul and Baghel, Himanshu (2012) Reduction and Swelling Behaviour of Fired Iron Ore Pellets. BTech thesis.
Jaiswal, Amit and Shekhar, Sudhanshu (2008) Heat Treatment of S.G Cast Iron. BTech thesis.
Krishnan, Tintula and Singh, Subhram Keshary (2008) Reduction Kinetics of iron ore pellets and the effect of Binders. BTech thesis.
Kumar, Abhishek (2017) Milling Characteristics of Cu and Ni. MTech thesis.
Kumar, Ajit (2015) Study of Fatigue Crack-hole Interaction and Prediction of Crack Path. MTech by Research thesis.
Kumar, Navin (2015) Design Development and Analysis of Humanoid Robot. MTech thesis.
Kumar, Navratan (2014) Diffusivity studies in Fe-Cr alloys by Molecular dynamics simulations. MTech thesis.
Kumar, Pawan (2015) Prediction of Fatigue Crack Growth in Part-through Cracked Pipes Using Exponential Model and Gamma Model. MTech by Research thesis.
Kumar, S Pavan and Sharma, Samir (2007) Effect of alkali treatment on jute fibre composites. BTech thesis.
Kumar, Saurabh (2012) Uniaxial Ratcheting Behaviour of SA 508 Steel. MTech thesis.
M, Surendra Kumar and Mahanta, Rahul Dev (2007) Casting of thrown away tool steel bits in the centrifugal casting route. BTech thesis.
Madhukar, Poloju (2011) Synthesis and Characterization of ZnO Nanostructures and Synthesis of Zn/Al2O3 Nanocomposite by Mechanical Alloying Route. MTech thesis.
Mahapatra, Lipsa (2007) The effect of strain rate on jute fiber composites. BTech thesis.
Mahto, Bishnu Prasad (2014) Characterization of ductile iron through fractographic study. MTech thesis.
Maitry, Kheer Sagar (2014) Electrocrystallization of metallic thin films on different substrates: Effect of operating parameters. MTech thesis.
Mallik, Manila (2011) Effect of microstructure on the indentation creep behaviour of 2.25Cr-1Mo and its comparison with modified 9Cr-1Mo ferritic steel. MTech thesis.
Markanday, Himanshu (2017) Incremental Forming of CP-Al Sheets Using the Helical Tool Path Strategy. MTech thesis.
Mishra, Barun and Baliarsingh, Sandeep Kumar (2008) Kinetics of Iron Ore Reduction by Coal and Charcoal. BTech thesis.
Mishra, Itishree and Priyadarsini, Asima (2007) Reduction kinetics of iron Ore pellets and the effect of binders. BTech thesis.
Mohakud, Partha Sundar (2009) Structures and Properties of Al-based Al-Si-Ni Nanostructures Developed by Mechanical Alloying. MTech thesis.
Nag, Arpit and Panda, Satyajit (2007) Study on carbonization of nonwoody biomass species. BTech thesis.
Narsimhachary, D (2014) Effect of laser welding parameters on 6061 aluminium alloy. MTech by Research thesis.
Nath, Chirag Ranjan and Panda, Sanup Kumar (2012) Fatigue Life Estimation of Pre-corroded 7075 Aluminium Alloy. BTech thesis.
Nautiyal, Hemant (2014) Effect of overloading and band overloading on fatigue crack growth of aluminum alloy 7075 -T651. MTech thesis.
Panda, Abhisek and Mohapatra, Prabhu Kalyan (2012) Tribological Studies on Al-SiC composite and Al-Si alloy. BTech thesis.
Panda, Ojaswi (2012) A Study on the Effect of Fiber Parameters on the Mechanical Behavior of Bamboo-Glass Fiber Reinforced Epoxy Based Hybrid Composites. BTech thesis.
Pati, Anindita (2015) Viscosity, Flow Characteristics and Microstructural Characterization of Industrial Blast Furnace Slags. MTech by Research thesis.
Pradhan, Akesh Kumar (2017) Development of Wheel Steels for EOT Crane Application. MTech thesis.
Pradhan, Manoj Kumar (2007) Some studies on sea water ageing of E GLASS/EPOXY resin composite with different fiber orientation. BTech thesis.
Praharaj, Swetapadma (2009) Processing and Characterization of Fly Ash - Quartz Coatings. MTech thesis.
Prakash, Nishant and Gamango, Dhirendra (2012) Study of ratcheting behavior of pure copper and pure aluminum using molecular dynamics simulation. BTech thesis.
Ravi, Kreethi (2019) Ratcheting Behaviour of 42CrMo4 Steel under Different Heat Treatment Conditions. PhD thesis.
Sahu, Subash Chandra and Chawla, Nirmal (2007) Effect of size of iron ore pellets on its reduction kinetics. BTech thesis.
Singh, A K (2010) Effect Of Vibration on Delaminated Beams. BTech thesis.
Singh, Kaushal Kishore and Bhattacharjee, Sudipto (2007) Study on the effect of high energy ball milling (a nano material process) on the microstructure and mechanical properties of a (Al-Si-Fe-Cu) alloy. BTech thesis.
Sourav, Pattanayak and Sabyasachi, Panda (2012) Charge Transfer vs Mass Transfer Mechanism in Electrodeposition of Copper thin films: A Structural Exploration. BTech thesis.
Srikar, Potnuru (2012) Studies on the physical properties and reduction-swelling behavior of fired hematite iron ore pellets. MTech thesis.
Subudhi, Sivananda and Kumar, Diwakar (2007) Preparation and characterisation of 60mol% Al2O3 & 40mol%ZrO2 microcomposite by SOL-GEL precipitation route. BTech thesis.
Swain, Bhabani Sankar (2007) Effect of sintering atmosphere on the property of ceria doped tetragonal zirconia polycrystals (Ce-TZP). MTech thesis.
Tiwari, Jai Narain (2015) Characterization of Blast Furnace Slag. PhD thesis.
Verma, Preeti (2011) Ratcheting Fatigue Behaviour and Post-fatigue Tensile Properties of Commercial Aluminium. MTech thesis.