Number of items at this level: 93.
Thesis
A, Aswin Jagadeesh. (2018) Numerical investigation of Taylor bubble flow distribution in multi cross-branched microchannels. MTech thesis.
Shreshth, Sandeep (2013) Lattice Boltzmann Method for Single Phase Heat Transfer and Two Phase Drop & Bubble Dynamics. MTech thesis.
Agarwal, Ankush (2009) Study on Thermal Storage from Exhaust of a Diesel Engine. BTech thesis.
Agarwal, Peeyush (2009) Simulation of Heat Transfer Phenomenon in Furnace Using Fluent-Gambit. BTech thesis.
Agrawal, Alok (2009) Bio Heat Transfer Model for Clinical Dermatological Treatment. MTech thesis.
Ahmad, Md Minhaz (2017) Carbon Dioxide (CO2) Capture in Cement Industry. MTech thesis.
Babu, Kaki Sarath (2016) Thermal and Acoustic Behaviour of Sisal Fibre Reinforced Epoxy Composites. MTech thesis.
Bal, P K (2014) Thermal conductivity of cement kiln dust filled epoxy composites. BTech thesis.
Banjare, Johan (2014) Equivalent Thermal Conductivity of Epoxy Composites Filled with Aluminium and Red Mud Particles. MTech thesis.
Barik, Rashmiranjan (2014) Characterization, Rheological and Pipe Loop Test Studies on Fly Ash Samples. MTech thesis.
Behera, Pritinika (2009) Analysis of Transient Heat conduction in Different Geometries. MTech thesis.
Bhanariya, Sumit (2015) Assessment of Effective Thermal Conductivity of Epoxy-TiO2 Composites. MTech thesis.
Bhanja, Amritraj and Panda, Anjan Kumar (2009) Numaerical Solution of Three Dimensionsl Conjugate Heat Transfer in a Microchannel Heat Sink and CFD Analysis. BTech thesis.
Bharti, Reetu (2016) Thermal Analysis of Cryogenic Rocket Thrust Chamber with Regenerative and Film Cooling. MTech thesis.
Chanda, Sajal (2016) Heat Flow Analysis of “Bell Less Top Gear Box” of Blast Furnace. MTech thesis.
Chandra, Kshitij (2015) Study on Effective Thermal Conductivity of Epoxy- Al2O3 Composites. MTech thesis.
Chauhan, Laxman (2015) Experimental Study of Solidification at Extreme Low Temperature in a Cylindrical Container. MTech thesis.
Chhotray, Animesh (2019) Balanced Postural Control and Path Planning Analysis of a Two-Wheeled Mobile Robot Using Various Soft Computing Techniques. PhD thesis.
Choudhury, Samir (2009) Radiation Modeling for Bio-Medical Applications. BTech thesis.
D, Tijo (2018) In-situ TiC-TiB2 coating on Ti-6Al-4V alloy by powder suspension electro-discharge coating (EDC) and tungsten inert gas (TIG) cladding processes. PhD thesis.
Dahariya, Karun Kumar (2013) Estimation of power generation potential of agricultural based biomass spiceis and coal-biomass mixed briquettes. MTech thesis.
Das, Bablu (2011) Estimation of Power Generation Potential of Non- Woody Biomass and Coal – Biomass Mixed Briquettes. MTech thesis.
Dear, Rishi Kumar (2007) Estimation of power generation potential of agricultural based biomass species. MTech thesis.
Dewangan, Hukum Chand (2022) Theoretical and Experimental Analysis of Large Deformation Induced Frequency, Static and Transient Responses of Layered Structure with Cutout under Thermo-Mechanical Loading. PhD thesis.
Dubey, Ankit Kumar (2012) Numerical Inspection of Heterogeneity: Homogeneous Intrusion in Bulk. MTech thesis.
Ekka, Sandip Belas (2013) Comparative studies on engine behavior in a DI diesel engine fueled with UTO at different compression ratios. MTech thesis.
Gangineni, Pavan Kumar (2022) Mechanical Behavior of Graphene Nanofiller Grafted Carbon Fiber Reinforced Polymer Composites. PhD thesis.
Hirwani, Chetan Kumar (2019) Experimental and Numerical Analysis of Nonlinear Dynamic Behavior of Delaminated Composite Shell Panel under Hygro-thermo-mechanical Loading. PhD thesis.
Inala, Ramu (2015) On the Dynamic Stability of Functionally Graded Material Plates Under Parametric Excitation. PhD thesis.
Inamdar, Anand S (2009) Drilling in Bone: Modeling Heat Generation & Temperature Distribution by Using HBIM. BTech thesis.
J, Rahul (2009) Analytical Solutions of Heat Conduction Problems. BTech thesis.
Jha, Chandan Kumar (2015) Effective Thermal Conductivity of h-BN Filled Epoxy Composites. BTech thesis.
Jha , Abhishekh Kumar (2013) CFD Simulation of a Small Stirling Cryocooler Using Non-Thermal Equilibrium Model. BTech thesis.
JOSEPH, SHINCE V. (2018) Buckling, Free Vibration and Dynamic Stability of Sandwich Plates with Functionally Graded Material Constraining Layer. PhD thesis.
Kar, Ashishman (2012) CFD analysis for natural convection of a vertical tube with various fin configurations. BTech thesis.
Kar, Vishesh Ranjan (2015) Nonlinear Thermoelastic Static Vibration and Buckling Behaviour of Functionally Graded Shell Panel. PhD thesis.
Katakam, Krishna Chaitanya (2022) Role of Defects on the Deformation Behavior and Mechanisms in Large-scale Nickel Nanowire Subjected to Different Loading Methods: A Molecular Dynamics Simulation Study. PhD thesis.
Koli, Aakash (2015) Study on Thermal and Acoustic Characteristics of Bagasse Fibre Reinforced Epoxy Composites. MTech thesis.
Kumar, Chandranan (2009) Counter Current Flow Phenomenon & Pressure Drop Calculation in Annular Geometry. MTech thesis.
Kumar, Durgesh (2016) Thermal Analysis of Blast Furnace Stave Cooling. MTech thesis.
Kumar, Jitesh (2023) Thermohydrodynamic Analysis of Gas Foil Bearings for High-Speed Turbomachinery. PhD thesis.
Majhy, Butunath (2016) A Study on Thermal Characteristic of Solid and Hollow Glass Microspheres Filled Polypropylene Composites. MTech thesis.
Mallick, Nirmal Charan (2018) Study of Algae Growth Using co2 From the Engine Exhaust. MTech thesis.
Nanda, Bishnu Prasad (2022) Development and Characterization of Epoxy Based Hybrid Composites Reinforced with Hair Fibers. PhD thesis.
Nayak, Deepika (2017) Identification of Flow Regime of Two-phase Flow. MTech thesis.
Nayak, Swaraj Sourav (2015) Thermal Conductivity of Epoxy Composites Filled With Aluminium Nitride (AIN). BTech thesis.
Nayak , Rakesh Rajan (2018) Experimental Study of Biogas Production & its Utilization in CI Engine in Dual Fuel Mode. MTech thesis.
Ojha, Shakuntala (2009) CFD Analysis on Forced Convection Cooling of Electronic Chips. MTech by Research thesis.
Padhy, Adarsh Ranjan (2016) Axisymmetric Analysis of Internally Pressurized Rotating Cylinder Using FEM Under Thermal Environment. MTech thesis.
Pal, Ram Kumar (2016) Thermo-Hydrodynamic Study of Subcooled and Critical Heat Flux Flow Boiling. MTech thesis.
Panda, Asutosh (2013) A Study on Thermal Conductivity of Epoxy/Al2O3 Composites. MTech thesis.
Panda, Debashis (2022) Thermopneumatic Analysis and Process Design of Closed Cycle Cryocoolers. PhD thesis.
Pradhan, Protsahan (2013) Comparative study of different adsorbent materials in a charcoal canister. BTech thesis.
Pradhan, Subhrajit (2022) Mechanical and Tribological Behaviour of Natural Fiber (Eulaliopsis Binata) Reinforced Polymer Composite. PhD thesis.
Pradhan, Tussarkanti (2016) A Study on Thermal Characteristics of Epoxy Composites Reinforced with Short Bagasse Fibres. MTech thesis.
Prakash, Chandra (2015) Effective Thermal Conductivity of Yttria Stabilised Zirconia Filled Epoxy Composites. BTech thesis.
Priyadarshini, Manisha (2021) Wire Electro-discharge Machining of Sub-cooled AISI P20 Tool Steel. PhD thesis.
Rai, Aryan (2016) Heat Pump Technology Feasibility Analysis for Dishwashers. MTech thesis.
Ramteke, Prashik Malhari (2023) Nonlinear Numerical Modelling and Analysis of Porous Functionally Graded Curved Structures under Thermomechanical Loading. PhD thesis.
Rao, K Sudhakara (2007) Analysis of flow maldistribution in tubular heat exchangers by fluent. MTech thesis.
Rath, Deepali (2011) Development of a gasifier for fueling of a diesel engine. BTech thesis.
Rath, Sunil Kumar (2009) CFD Analysis using Multigrid Algorithm. BTech thesis.
S , Sujaykhosh (2018) Effect of Silicon Carbide as Filler Reinforcement on the Damping properties of Glass-Fibre Epoxy Composites. MTech thesis.
Sahoo, Debiprasad (2016) Pulsatile Flow in A Helically Coiled Tube-in-Tube Heat Exchanger. MTech thesis.
Sahu, Madhusmita (2014) A study on thermal characteristics of polymer composites
filled with micro sized tio2 particles. MTech by Research thesis.
Sahu, Anshuman Kumar (2021) Performance Assessment of Rapid Tool Electrodes During Electrical Discharge Machining of Titanium and Its Alloy. PhD thesis.
Sahu , Sandip Kumar (2014) Cooling Load Estimation for a Multi-story office building. MTech thesis.
Samal, Ali Padarbinda (2015) Characterization of Properties and Estimation of Power Generation Potentials of Residues of Some Woody Biomass Species. MTech by Research thesis.
Samal, Kumar (2022) Recognition, Characterization, Categorization, and Forecasting of Counter-Current Gas-Liquid and Liquid-Liquid Two-Phase Flow-Structures: Experimental, Computational, And Numerical Attempts. PhD thesis.
Samal, Soubhagya Ranjan (2014) Effective thermal conductivity of epoxy matrix composites filles with coconut coir dust. BTech thesis.
Samantarai, Shakti Prasad (2014) Tribological behaviour of rice husk reinforced polymer matrix composite. PhD thesis.
Sanwal, Shantanu (2016) Turbulent Natural Convection in an Enclosure With a Triangular Roof with Different Inclination Angles. MTech thesis.
Sarkar, Binay Krishna (2018) Flow-Regime of a Liquid-Liquid Counter Current Two-Phase Flow. MTech thesis.
Shaibu, V.B (2021) Thermo-mechanical Investigation of Dissimilar Welding of AISI 304 Stainless Steel with Commercially Pure Copper. PhD thesis.
Sharma, Santosh Kumar (2019) Studies on Some Aspects of Implementation of Reverse Logistics in Indian Context. PhD thesis.
Shekhar, Shashi (2013) CFD analysis of heat transfer in a helical coil heat exchanger using fluent. BTech thesis.
Shevkar, Prafulla Prakash (2016) Thermo-Hydrodynamics of Heat Transfer Enhancement During a Gas-Liquid Taylor Bubble Flow in a Mini/Microchannel. MTech thesis.
Shukla, Anand (2009) Forced Convection in Channels with Viscous Dissipation. BTech thesis.
Singh, Anunay Kumar (2014) Effective thermal conductivity of epoxy matrix composites filled with granite dust. BTech thesis.
Singh, Ashutosh (2009) Analysis of Reweting of Hot System. BTech thesis.
Singh, D (2014) Study on feasibility of coir dust as feedstock for entrained flow gasification system. MTech thesis.
Singh, Gurpreet (2010) Mixed Convection Heat Transfer in the
Entrance Region of an Inclined Channel. BTech thesis.
Swain, Priyadarshi Tapas Ranjan (2018) Mechanical, Thermal and Tribological Behaviour of Surface Modified Jute Fiber Reinforced Epoxy Composites. PhD thesis.
Thomas, Basil George (2016) Thermo-Hydraulic Simulation of Oxidizer Booster Turbopump for Semicryogenic Engine. MTech thesis.
Thomas, Benedict (2016) Vibration Analysis of Functionally Graded Carbon Nanotubes Reinforced Composite Shell Structures. PhD thesis.
Tiwari, Nishant (2017) Recovery of Waste Heat from Pyrolysis Reactor. MTech thesis.
Tom, Sachin (2016) Numerical Study of Turbulent Natural Convection in an Enclosure with Conjugate Heat Transfer. MTech thesis.
Toppo, Niraj (2013) Determination of sauter mean diameter of four different fuels and their effects on performance and emission in a CI engine. MTech thesis.
Upadhyay , Shivam (2018) Dynamic Analysis of Cracked Viscoelastic Beam with Circular Cross Section using an Operator Based Finite Element Approach. MTech thesis.
Vaikunthbhai, K P (2014) Free Vibration and Buckling Behaviour of Laminated Composite Panel under Thermal and Mechanical Loading. MTech by Research thesis.
Vaikunthbhai, Katariya Pankajkumar (2020) Nonlinear Structural Analysis of SMA Bonded Curved Skew Sandwich Composite Panel Under Hygro-Thermo- Mechanical Loading. PhD thesis.
Verma, Chuneshwar Lal (2014) Design of an air distribution system. MTech thesis.
Yadav, Amit Kumar (2013) Thermal characteristics of boron nitride filled epoxy composites. MTech thesis.
This list was generated on Mon Dec 23 03:07:44 2024 IST.
