Items where Subject is "Engineering and Technology > Mechanical Engineering > Mechatronics"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type
Jump to: A | B | C | D | G | J | K | M | N | P | R | S | T | Y
Number of items at this level: 45.

A

Alli, Sheak Aftab (2015) Design, Fabrication and Analysis of a Hexapod. MTech thesis.

Amrit, Geet (2015) Design and Fabrication of an Unmanned Aerial Vehicle. MTech thesis.

B

Bandhu, Arpan and Panda, Atula Kumar (2011) Navigation and Control of Automated Guided Vehicle using Fuzzy Inference System and Neural Network Technique. BTech thesis.

Behera, Abyarth Kumar (2015) Wall Climbing Robot for Inspection of Wall Using Digital Image Processing. MTech thesis.

Bhivate, Parth (2011) Modelling & development of antilock braking system. BTech thesis.

C

Chatterjee, Suman (2020) Experimental Investigation on Drilling and Welding of Engineering Materials using Laser. PhD thesis.

Chawla, B S (2005) An Analysis of Strain in Chip Breaking Using Slipline Field Theory with Adhesion Friction at Chip/Tool Interface. PhD thesis.

Cherukuri, Krishna Swamy (2007) Thermal network theory for switchgear under continuous current. MTech thesis.

Chourasiya, Bhuwaneshwar (2007) Navigation of mobil robot using fuzzy logic controller. MTech thesis.

D

Das, Geetanjali (2016) Processing, Characterization and Erosion Wear Behaviour of Coir Fiber Reinforced Epoxy Composites. MTech by Research thesis.

Dash, S K and Marandi, M D (2014) Navigation control of an automated mobile robot robot using neural network technique. BTech thesis.

Dewangan, Hukum Chand (2022) Theoretical and Experimental Analysis of Large Deformation Induced Frequency, Static and Transient Responses of Layered Structure with Cutout under Thermo-Mechanical Loading. PhD thesis.

G

Garg, Sushil (2010) Development of a self balanced robot and its controller. BTech thesis.

J

Jani, Dhyanchand (2016) Autonomous Pathfinding for Planetary Rover by Implementing A* Algorithm on an Aerial Map Processed Using MATLAB Image Processing Tool. MTech thesis.

Jena, Shakti Prasanna (2016) Dynamic Analysis and Fault Detection of Multi Cracked Structure Under Moving Mass Using Intelligent Methods. PhD thesis.

K

Khuntia, Tanmayee (2022) Processing, Characterization and Flammability Behavior of Coir Fiber/Sirisha Bark Filler Reinforced Hybrid Polymer Composite. PhD thesis.

Koteswararao, D (2020) Dynamic Analysis and Active Control of Functionally Graded Rotor Shaft System. PhD thesis.

Kumar, Deepak (2009) Alternative Design of Manipulation for Maintenance Work in Hazardous Environment. BTech thesis.

Kumar, Kamlesh (2020) Ti-6Al-4V alloy weld joint by variant of TIG welding method: Characterization and mechanical performance evaluation. PhD thesis.

Kumar, Raj Babbar (2015) Underwater Control of Mobile Robot. BTech thesis.

M

Malik, Ramee (2016) Studies on Metallization of RP Parts for use in Preserving Artefacts. MTech by Research thesis.

Mehar, Amit Kumar (2017) Development, Characterization of Mechanical Properties, Wear behaviour and Machining Analysis of Ceramic Composites for Bio-Medical Applications. PhD thesis.

Mishra, Manu (2015) Design and Fabrication of Underwater Robot. MTech thesis.

Mishra, Pratik (2012) Design and fabrication of coaxial micro helicopter. BTech thesis.

Mohanta, Dibyendu Kumar (2012) Use of Fuzzy Logic for Automated Steering of Unmanned Robotic Agent. BTech thesis.

Mohapatra, Lopamudra (2018) Characterization & Abrasive Wear Behavior of Bio-fiber Based Carbon Black Reinforced Epoxy Composites. MTech thesis.

N

Nandiganahalli, Suraj (2009) Mobile Platform Control Using Fuzzy-Logic and Webots. BTech thesis.

Nepak, Prabhu Datta (2013) Navigation Control of an Automated Guided Underwater Robot using Neural Network Technique. BTech thesis.

P

Padhy, Adarsh Ranjan (2016) Axisymmetric Analysis of Internally Pressurized Rotating Cylinder Using FEM Under Thermal Environment. MTech thesis.

Padhy, Saroj Kumar (2016) Path Planning and Motion Analysis of an Autonomous Underwater Robot. MTech thesis.

Panda, Debashis (2016) Mathematical Modelling and Design Software for Pulse Tube Cryocoolers. MTech by Research thesis.

Patnaik, S Srikant (2022) Dynamic Analyses of CNT-based Viscoelastic Composite Shell Structures in Hygrothermal Conditions. PhD thesis.

Potnuru, Srikar (2016) Numerical, Analytical and Experimental Analysis of Combined Extrusion Forging Processes Applied to Collet Chuck Holders. PhD thesis.

Pradhan, Mohan Kumar (2010) Experimental Investigation and Modelling of Surface Integrity, Accuracy and Productivity Aspects in EDM of AISI D2 Steel. PhD thesis.

R

Rohan Kumar, Sabat and Anshu J, Behera (2012) Automated steering design using Neural Network. BTech thesis.

S

Sahoo, Biswajit (2018) Study and Analysis of Mobile and Humanoid Robots using Intelligent Optimization Techniques. MTech thesis.

Sahoo, Chiranjibi (2015) Development of a 6 DOF Parallel Serial Hybrid Manipulator. MTech thesis.

Sahu, Sasmita (2016) Inspection and Monitoring of Structural Damage Using Vibration Signatures and Smart Techniques. PhD thesis.

Samal, Kumar (2022) Recognition, Characterization, Categorization, and Forecasting of Counter-Current Gas-Liquid and Liquid-Liquid Two-Phase Flow-Structures: Experimental, Computational, And Numerical Attempts. PhD thesis.

Sarangi, Prakash (2014) An Indigenous Automated GupChup Machine. BTech thesis.

Satpathy, Sanmay (2009) Controling of Mobile Agents using Intelligent Strategy. BTech thesis.

Saxena, Rishabh (2016) Effect Of Oxide Dispersion On Microstructure, Mechanical, And High Temperature Behaviour Of Tungsten Based Alloys. MTech by Research thesis.

Singh, Ashish (2015) Design, Analysis and Fabrication of a Reconfigurable Stair Climbing Robot. MTech thesis.

T

Tibrewal, B and Swain, T K (2014) Path planning and control of mobile robot using fuzzy logic. BTech thesis.

Y

Yuva Raju, Bonda Atchuta Ganesh (2021) Signal Analysis and Chatter Control Studies in Internal Turning Operations. PhD thesis.

This list was generated on Sun Dec 22 18:52:06 2024 IST.