Items where Division is " Engineering and Technology > Department of Mechanical Engineering" and Year is 2016
Number of items: 104.
Abhiman, Tompe Umesh (2016) Vibration Analysis of Nano-Plate Using Nonlocal Elasticity. MTech thesis.
Abhishek , . (2016) Ultrasonic Spot Welded Dissimilar Joint of AISI 304SS to CP-Copper Sheets with Inter Layer: An Experimental Investigation. MTech thesis.
Alkassar, Yassin (2016) Fault Analysis/Condition Monitoring of Vibrating Structures. MTech thesis.
Azim, Sabana (2016) Effect of Cutting Parameters on Micro Drilling Characteristics of Incoloy 825. MTech thesis.
Babu, Kaki Sarath (2016) Thermal and Acoustic Behaviour of Sisal Fibre Reinforced Epoxy Composites. MTech thesis.
Barik, Debabrata (2016) Experimental studies on Biogas Production and Its Utilization in a Direct Injection Diesel Engine Run on Dual Fuel Mode. PhD thesis.
Behera, Ranjit (2016) CFD Analysis of Aerostatic Bearing for Cryogenic Turbo-Expander. MTech thesis.
Bharti, Reetu (2016) Thermal Analysis of Cryogenic Rocket Thrust Chamber with Regenerative and Film Cooling. MTech thesis.
Bhoi, Tankadhar (2016) CFD Analysis of Maldistribution in Mini-channel Heat Exchanger. MTech thesis.
Biswal, Somen (2016) Processing and Characterization of Epoxy Composites Reinforced with Short Palmyra Fibers. MTech thesis.
Chakradhari, Horaj (2016) Numerical Simulation Of Chilldown in LN2 Transfer Line. MTech thesis.
Chanda, Sajal (2016) Heat Flow Analysis of “Bell Less Top Gear Box” of Blast Furnace. MTech thesis.
Chandraker, Saurabh (2016) Modelling and Model Reduction of Viscoelastic Composite Rotors - An Operator Based Approach. PhD thesis.
Cherukuri, Surinarayana (2016) Experimental and Numerical Analysis of Angular Error in Taper Cutting Using Wire Electrical Discharge Machining. MTech thesis.
Dansana, Kalyani (2016) Design of Blade Profile for Inward Flow Radial Turbine. MTech thesis.
Das, Geetanjali (2016) Processing, Characterization and Erosion Wear Behaviour of Coir Fiber Reinforced Epoxy Composites. MTech by Research thesis.
Dash, Mimosha (2016) A Study on Thermal Characteristics of Epoxy Composites Filled with Natural Fiber and Particulate. MTech by Research thesis.
Dewangan, Rahul (2016) Mechanical and Tribological Behaviour of Rubber Wood Powder (Hevea Brasiliensis) Reinforced Epoxy Composite. MTech thesis.
Ganguly, Abhijeet (2016) Economic Design of Control Charts Using Metaheuristic Approaches. PhD thesis.
Gattu, Naga Pavan Kumar (2016) Surface Modification of AISI 304 Stainless Steel by Electrical Discharge Coating Using Powder Suspension Method. MTech thesis.
Ghosh, Dibyendu (2016) Phase Separation Phenomena Through Tee Junction. MTech thesis.
Gupta, Sagar (2016) Finite Element Analysis of Composite Multi Leaf Spring for
Jain, Ashish (2016) Multi-Objective Optimization of Process Parameters for Through-Hole Machining of Ti-6Al-4V Alloy by EDM. MTech thesis.
Jani, Dhyanchand (2016) Autonomous Pathfinding for Planetary Rover by Implementing A* Algorithm on an Aerial Map Processed Using MATLAB Image Processing Tool. MTech thesis.
Jena, Rini (2016) Free Vibration and Buckling Analysis of Sandwich Plate. MTech thesis.
Jena, Shakti Prasanna (2016) Dynamic Analysis and Fault Detection of Multi Cracked Structure Under Moving Mass Using Intelligent Methods. PhD thesis.
Jha, Alok Kumar (2016) Intelligent Control and Path Planning of Multiple Mobile Robots Using Hybrid Ai Techniques. PhD thesis.
Jogee, Sourabh Sadanand (2016) Design and Analysis of Expansion Wheel for Low Temperature Helium Turbine. MTech thesis.
Kandi, Rudranarayan (2016) Acoustic Horn Design, Numerical and Experimental Investigations of Ultrasonic Vibration Assisted Turning of Ti-6Al-4V. MTech by Research thesis.
Khandual, Abinash (2016) CFD Analysis of Stirling Type Inertance Tube Pulse Tube Refrigerator. MTech thesis.
Kujur, Anjuni (2016) CFD Simulation of Inertance-Tube Pulse Tube Refrigerator with Variable Cross Section of Regenerator and Pulse Tube. MTech thesis.
Kumar, Chitranjan (2016) Aerodynamic Analysis of Spiral Grooved Gas Thrust Bearing. MTech thesis.
Kumar, Durgesh (2016) Thermal Analysis of Blast Furnace Stave Cooling. MTech thesis.
Kumar, Peeus (2016) Dynamic Analysis of Rotating Bladed Disk with Underplatform Damper. MTech thesis.
Lahare, Pushpendra Bahadur Singh (2016) Analysis of Rectangular Channel Printed Circuit Heat Exchanger(PCHE). MTech thesis.
Majhy, Butunath (2016) A Study on Thermal Characteristic of Solid and Hollow Glass Microspheres Filled Polypropylene Composites. MTech thesis.
Mali, Venkat Reddy (2016) Optimization of Machining Performances in CNC Drilling CFRP (Epoxy) Composites. MTech thesis.
Malik, Ramee (2016) Studies on Metallization of RP Parts for use in Preserving Artefacts. MTech by Research thesis.
Manoj, K N Sai (2016) Experimental Studies Towards Development of a Single Stage High Refrigerating Capacity G-M Type Pulse Tube Refrigerator. MTech by Research thesis.
Mishra, Aman (2016) CFD Analysis of Shell and Tube Heat Exchanger with Segmental Baffles. MTech thesis.
Mishra, Devasis (2016) Dynamic Behavior of Damaged Beam Subjected To Moving Mass. MTech thesis.
Mishra, Praveen (2016) Hydrodynamics of Drop in an Inclined Plane. MTech thesis.
Mishra, Swayam (2016) A Study On Parametric Appraisal of Fused Deposition Modelling (FDM) Process. PhD thesis.
Mohan, Sagar (2016) Non-Prismatic Energy Harvester for Rotating System. MTech thesis.
Mohanta, Niharika (2016) Preparation and Characterization of Luffa Cylindrica Fiber Reinforced Polymer Composite. PhD thesis.
Mohanty, Salil (2016) Computational Flow Analysis of Cryogenic Turboexpander. MTech thesis.
Mohapatra, Sambit Kumar (2016) Aluminium Based Material Extrusion Through Mathematical Contoured Die: Numerical & Experimental Investigation. PhD thesis.
Nadaf, Arman Mohaddin (2016) Quench Protection System of Superconducting Quadrupole Magnet: Simulation and Experimental Studies. MTech thesis.
Nayak, Prashit Kumar (2016) Modelling and Experimental Investigation of HASTELLOY C-276 Using Electro Discharge Machining (Edm). MTech thesis.
Nepak, Banamali (2016) Free Vibration Analys of Sandwiched Cylindrical Shell. MTech thesis.
Nitesh, . (2016) Effect of Pulsed Current for Autogenous TIG Welding of AISI 304 Stainless Steel. MTech thesis.
Padhy, Adarsh Ranjan (2016) Axisymmetric Analysis of Internally Pressurized Rotating Cylinder Using FEM Under Thermal Environment. MTech thesis.
Padhy, Saroj Kumar (2016) Path Planning and Motion Analysis of an Autonomous Underwater Robot. MTech thesis.
Pal, Lipsa (2016) Numerical Study of Flow Over a Projectile. MTech thesis.
Pal, Ram Kumar (2016) Thermo-Hydrodynamic Study of Subcooled and Critical Heat Flux Flow Boiling. MTech thesis.
Panda, Debashis (2016) Mathematical Modelling and Design Software for Pulse Tube Cryocoolers. MTech by Research thesis.
Panda, Sandeep Ranjan (2016) Study and Design of Helium Scroll Compressor. MTech thesis.
Pandey, Anish (2016) Mobile Robot Navigation in Static and Dynamic Environments using Various Soft Computing Techniques. PhD thesis.
Pandey, Ankit Kumar (2016) Studies on Parametric Appraisal of Friction Stir Welding. MTech by Research thesis.
Panwariya, Chirag (2016) Evaluation of Nitride Layer on Ti-6Al-4V Titanium Alloy by Tungsten Inert Gas (TIG) Nitriding Method. MTech thesis.
Patle, Bhumeshwar Kunjilal (2016) Intelligent Navigational Strategies For Multiple Wheeled Mobile Robots Using Artificial Hybrid Methodologies. PhD thesis.
Pattanaik, Samarendra (2016) Improvement in Service Life of Skip Car by Using Chromium Carbide Overlay Plate with Special Reference to Rourkela Steel Plant. MTech by Research thesis.
Posa, Lokesh (2016) Design and Performance of Helium Liquefier based on GM Cryocooler. MTech thesis.
Potnuru, Srikar (2016) Numerical, Analytical and Experimental Analysis of Combined Extrusion Forging Processes Applied to Collet Chuck Holders. PhD thesis.
Pradhan, Chandrakant (2016) Entrainment through Rotation in Multiphase System. MTech thesis.
Pradhan, Premendra Mani (2016) Modelling and Prediction of Low Temperature Fatigue Life of 7075-T651 Aluminium Alloy. MTech thesis.
Pradhan, Tussarkanti (2016) A Study on Thermal Characteristics of Epoxy Composites Reinforced with Short Bagasse Fibres. MTech thesis.
Pradhan , Dilip Kumar (2016) Improvement of Surface Finish in Boring Operation Using Composite Material. MTech thesis.
Prasad, Gourav (2016) FE Modelling of EDM Process. MTech thesis.
Pratap, Raghvendra (2016) Design of Turbine Blade of Turboexpander for Helium Liquefaction. MTech thesis.
Rahul, . (2016) Vibration Analysis of Nanocomposite Shell Structures. MTech thesis.
Rai, Aryan (2016) Heat Pump Technology Feasibility Analysis for Dishwashers. MTech thesis.
Rajasekhar, M (2016) Dynamic Analysis, Identification and Control Studies of Aero-Engine Model Rotor-Bearing Systems. PhD thesis.
Sahoo, Debiprasad (2016) Pulsatile Flow in A Helically Coiled Tube-in-Tube Heat Exchanger. MTech thesis.
Sahoo, Sushanta Kumar (2016) Environmental Friendly Electroless Copper Metallization on FDM Build ABS Parts. MTech thesis.
Sahoo, Sushree Sasmita (2016) Experimental and Numerical Investigation of Static and Dynamic Analysis of Delaminated Composite Plate. MTech by Research thesis.
Sahu, Sasmita (2016) Inspection and Monitoring of Structural Damage Using Vibration Signatures and Smart Techniques. PhD thesis.
Sahu, Sibasish (2016) Free Vibration Study of Sandwich Plate With Different Boundary Conditions. MTech thesis.
Samant, Abhijit (2016) An Experimental Investigation in Hard Turning of AISI 4140 Steel. MTech thesis.
Sanwal, Shantanu (2016) Turbulent Natural Convection in an Enclosure With a Triangular Roof with Different Inclination Angles. MTech thesis.
Senapati, Madhusmita (2016) Design and Control of an Articulated Robotic Arm Using Visual Inspection for Replacement Activities. MTech by Research thesis.
Shariq, Sk Avez (2016) A CFD Simulation of High Altitude Testing of the Cryogenic Engine. MTech thesis.
Shevkar, Prafulla Prakash (2016) Thermo-Hydrodynamics of Heat Transfer Enhancement During a Gas-Liquid Taylor Bubble Flow in a Mini/Microchannel. MTech thesis.
Singh, Abhilekh (2016) Free Vibration Analysis of Sandwich Shell. MTech thesis.
Singh, Kalebar (2016) A Predictive System for Blast Furnace Cooling Stave Using Heat Transfer Model and Neural Network. MTech thesis.
Singh, Mahendra (2016) Effect of Cutting Parameters and Cutting Environment on Surface Integrity During Machining of Nimonic C-263. MTech thesis.
Singh, Rahul (2016) Analysis and Parametric Identification of Air Foil Bearing Rotor System. MTech thesis.
Sinha, Vishal Anand (2016) A Parametric Study on the Cryosurgery of Gel Mimicking Tissue Phantoms. MTech thesis.
Srikanth, Rupavath (2016) Experimental and Numerical Analysis of Free Vibration and Dynamic Behaviour of Laminated Composite Shallow Shell under Hygrothermal Condition. MTech thesis.
Sureka, Yogesh (2016) Numerical Simulation of Heat Transfer Mechanism in a ‘V’ Type Corrugated Channel. MTech thesis.
Suyal, Rohit (2016) CFD Analysis of Fuel Sloshing in a Cylindrical Tank with and Without Baffles Under Linear Acceleration. MTech thesis.
Talla, Gangadharudu (2016) Powder-mixed Electric Discharge Machining (PMEDM) of Inconel 625. PhD thesis.
Thakur, Aruna (2016) Influence of Advanced Coated Tools on Machinability Characteristics of Incoloy 825. PhD thesis.
Thakur, Arvind Kumar (2016) Elastic and Thermal Analysis of Clay/Polymer Nanocomposite Material. MTech thesis.
Thomas, Basil George (2016) Thermo-Hydraulic Simulation of Oxidizer Booster Turbopump for Semicryogenic Engine. MTech thesis.
Thomas, Benedict (2016) Vibration Analysis of Functionally Graded Carbon Nanotubes Reinforced Composite Shell Structures. PhD thesis.
Tiwari, Pawan Kumar (2016) Vibration Analysis of CNT Based Functionally Graded Shell
Tom, Sachin (2016) Numerical Study of Turbulent Natural Convection in an Enclosure with Conjugate Heat Transfer. MTech thesis.
Ukirde, Vikram Umakant (2016) Experimental and Numerical Analysis of PZT Bonded Laminated Composite Plate. MTech thesis.
Upadhyay, Chandramani (2016) An Experimental Investigation Emphasizing Surface Characteristics of Electro-Discharge Machined Inconel 601. MTech thesis.
Vasu, Posipogu Shanmukha (2016) Tribological Behaviour of Epoxy Composites Reinforced with Micro-Sized Red Mud Particles. MTech thesis.
Verma, Naveen Kumar (2016) Nonlinear Free Vibration Analysis of Tapered Hollow Beam. MTech thesis.
Vishwakarma, Bipin Kumar (2016) Modeling of 2m Single Phase High Temperature Superconducting Power Cable. MTech thesis.
Yadao, Adik Ramdayal (2016) Dynamic Analysis of Cracked Rotor in Viscous Medium and its Crack Diagnosis Using Intelligent Techniques. PhD thesis.