Number of items: 118.
., Ranjeet (2017) Three Dimensional Analysis of Combined Extrusion-forging Process. MTech thesis.
., Shaileja (2017) Identification of Potential Hazards and Critical Tasks Involving High Risks and Providing Additional Control Measures. MTech thesis.
., Sweta Saroj (2017) Deposition of TiC-INCONELl825 Composite Coating on AISI 304 Steel By TIG Cladding Process. MTech thesis.
Acharya, Biswajit (2017) Energy Harvesting From a Non-Prisimatic Cantilever Beam. MTech thesis.
Ahmad, Md Minhaz (2017) Carbon Dioxide (CO2) Capture in Cement Industry. MTech thesis.
Amarthaluri, Lalitha Jyothi (2017) CFD Analysis of Turbine of a Turboexpander. MTech thesis.
Banik, Ashish (2017) Turbulent Natural Convection in a Three Dimensional Enclosure With Triangular Roof. MTech thesis.
Behera, Deepak Kumar (2017) Investigation in to Mechanical and Tribological Behavior of Pistachio Shell Powder (Pistacia Vera) Reinforced Epoxy Composite. MTech thesis.
Behera, Suraj Kumar (2017) Tribology and Rotordynamics of Small High-Speed Cryogenic Turboexpander. PhD thesis.
Bendu, Harisankar (2017) Experimental and Numerical Analysis of Ethanol Fueled HCCI Engine. PhD thesis.
Bhaumik, Debrup (2017) Risk Assessment of Rotating Equipment by Using HIRA Methodology. MTech thesis.
Biswal, Alok Ranjan (2017) Geometric Nonlinear Finite Element and Genetic Algorithm Based Vibration Energy Harvesting from Functionally Graded Nonprismatic Piezolaminated Beams. PhD thesis.
Boddikondla, Rajesh (2017) CFD Analysis of Sloshing Effect in a Rectangular Tank With and Without Baffles Under Linear Acceleration. MTech thesis.
Chaini, Upasana (2017) Entrainment Using Rotary Motion. MTech thesis.
Chakraborty, Debashish (2017) Chilldown Process in Cryogenic Transfer Line. MTech thesis.
Chaturvedi, Abhishek (2017) Fabrication and Characterization of Luffa Fiber Reinforced Polymer Composite and Development of Experimental Set-up for Thermal Free Vibration. MTech thesis.
Chavan, Rahul Gautam (2017) Vibration Analysis of Two Moving Masses on Beam. MTech thesis.
Chide, Punit Shankar (2017) Experimental Investigation of Various Surface Integrity Aspects in Hard Turning of AISI 4340 Alloy Steel With Coated and Uncoated Cermets. MTech thesis.
Dash, Subjit (2017) A Project Report on “Implementation of Contractor Safety Management at One of The
Largest Steel Plants in Odisha”. MTech thesis.
Devireddy, Siva Bhaskara Rao (2017) Mechanical, Thermal and Physical Properties of Hybrid Banana-Jute Fibers Reinforced Epoxy and Polyester Composites: Modeling and Experiments. PhD thesis.
Francis, Abel Christena (2017) Numerical Simulation of Dual Bell Nozzle for Rocket Engines. MTech thesis.
Gadhiraju, Bharath Varma (2017) Fatality Risk Control Program In Hot Strip Mill. MTech thesis.
Ghodki, Devendra M (2017) Kinematic, Dynamic and Gait Analysis for Navigation of NAO Humanoid Robot in a Cluttered Environment. MTech by Research thesis.
Gupta, Amit Kumar (2017) Phase Splitation Through T-Junction. MTech thesis.
Gurung, Diwakar (2017) Implementation of PID and Fuzzy Logic Based Controller in Two Wheel Driven Self-Balancing Robot. MTech thesis.
Habeeb, Rahman VT (2017) Modal Analysis of High Speed Cryogenic Turboexpander. MTech thesis.
Jasti, Anurag (2017) Modelling and Analysis of Plain Weave Fabric Reinforced Composites using Finite Element Method. MTech thesis.
Jawale, Praneet Parmeshwar (2017) Design and Analysis of Electromagnetic Energy Harvester for Improvising Harvester Potential. MTech thesis.
Jena, Prabir Kumar (2017) Crack Assessment of Beam Structures from Changes in Natural Frequencies Using Meta-heuristic Approaches. PhD thesis.
Jena , Ashutosh (2017) A Safety Project Report on Emergency Preparedness, Accident Investigation and HIRA. MTech thesis.
Jhade, Vidhyasagar (2017) Effect of Base Bleed on Drag of a Boat-Tail Projectile. MTech thesis.
Joseph, Jomy (2017) Construction Safety, Risk Management System, Kochi Metro, L&T and Coal Handling Safety, JSW. MTech thesis.
K B, Ashita (2017) Design and Optimization of Heat Exchanger for Cooling of Supercritical Helium Using Boiling Liquid Helium. MTech thesis.
K., Prakash (2017) Numerical Investigation on Single Stage Co-Axial Pulse Tube Refrigerator. MTech thesis.
Kishore, M. L. Pavan (2017) Hydrodynamic Design Structural Analysis and Optimization of Marine Propeller Blade. PhD thesis.
Kishore, Siripurapu Yada (2017) Design of Micro-Channel Heat Sink for Wall Temperature Uniformity. MTech thesis.
Koshti, Krushna Devidas (2017) Numerical Study for Subcooling of Liquid Nitrogen in GM Cryocooler. MTech thesis.
Kothuru , Venkata Vara Lakshmi (2017) Kinematic Design, Dynamic Modelling and Control Studies of Revolute Planar Parallel Manipulator with Secondary Considerations. PhD thesis.
Kulkarni, Prathamesh Ghanashyam (2017) Study of Damping Characteristics in Fiber Reinforced Composite Beams. MTech thesis.
Kumar, Ajit (2017) Flow Field and Heat Transfer Characteristics of an Axisymmetric Air Augmented Rocket. MTech thesis.
Kumar, Anshuman (2017) Investigations on Machining Aspects of Inconel 718 During Wire Electro-Discharge Machining (WEDM): Experimental and Numerical Analysis. PhD thesis.
Kumar, Chandan (2017) Studies on a Shell and Tube Heat Exchanger Using CFD. MTech thesis.
Kumar, Jitesh (2017) Numerical Analysis of Regenerator and Stirling Type Pulse Tube Cryocooler. MTech thesis.
Kumar, Krishna (2017) Experimental Study on Drilling of GFRP and CFRP Composites. MTech thesis.
Kumar, Sunny (2017) Effect of Graphite Particulate on Mechanical Properties of Glass Fiber Reinforced Composite. MTech thesis.
Kumar, Vikas (2017) Hazard Identification and Risk Assessment at Blast Furnace (Cast House). MTech thesis.
Kumar, Vishal (2017) Experimental Investigation of Biogas Production & Its Utilization in CI Engine-An Environmental Approach. MTech thesis.
Kumar , Kamlesh (2017) Design and analysis of Cold Box for Helium Liquefier / Refrigerator. MTech thesis.
Kumar , Saurabh (2017) Study of Dynamics of Functionally Graded Structural Elements Considering Geometric Nonlinearity. PhD thesis.
Mandal, Ritesh (2017) Development of MATLAB Based Dynamic Model of the Helium Liquefier / Refrigerator. MTech thesis.
Mandapati, Ravi Kumar (2017) Influence of PVD AlCrN Coating and Surface Treatments on Characteristics and Performance of Cutting Tools during Machining of Incoloy 825. MTech thesis.
Mathew, Mrudul (2017) Health and Safety Management Systems in Thermal Power Plants and Safety Inspection at L&T Constructions, Kochi Metro Rail Project. MTech thesis.
Md., Riazuddin (2017) Optimization of Process Parameters in Wire Electro Discharge Machining during Taper Cutting of Inconel 625. MTech thesis.
Mehar, Amit Kumar (2017) Development, Characterization of Mechanical Properties, Wear behaviour and Machining Analysis of Ceramic Composites for Bio-Medical Applications. PhD thesis.
Mishra, Dileep Kumar (2017) Experimental Investigation on Through Hole making by Electro-Discharge Machining (EDM) of Inconel 625 Super Alloy Using Hollow Copper Tool Electrode. MTech thesis.
Mishra, Himanshu (2017) Modeling and Optimization of Micro-EDM Operation for Fabrication of Micro Holes. PhD thesis.
Mishra, Itishree (2017) Thermal Analysis of Stave Cooler Near Tap Hole Zone. MTech thesis.
Mishra, Snehlata (2017) An Experimental study on solidification of a binary Mixture inside a Cryovial. MTech thesis.
Misra, Nitish (2017) Identification and Mitigation of Risk Associated with Eot Crane During Material Handling. MTech thesis.
Mittal, Himanshu (2017) Simulation Study of Luffa Fiber Reinforced Composite Under Various Geometrical Parameters. MTech thesis.
Mohapatra, Saktiswarup (2017) Kinematic Analysis and Path Planning of Humanoid NAO. MTech thesis.
Moharana, Bikash Ranjan (2017) Mechanical and Metallurgical Investigation of AISI 304 Stainless Steel and Commercially Pure Copper Dissimilar Metal Couple Weldments. PhD thesis.
Nahak, Pradeep (2017) Dynamics of Cracked Viscoelastic Beam Using Operator Based Finite Element Approach. MTech thesis.
Naik, Danavath Vasu (2017) Mechanical and Tribological Behavior of Rubber Wood Fiber Reinforced Epoxy Composite. MTech thesis.
Nayak, Deepika (2017) Identification of Flow Regime of Two-phase Flow. MTech thesis.
Nayak, Saurav Kumar (2017) Electrical and Thermal Behaviour of High Temperature Superconductors for SFCL Applications. MTech thesis.
Nayak, Soumya Ranjan (2017) Design and Analysis of a Methane Pump for 10 Ton Class Rocket Engine. MTech thesis.
Nigam, Shrutee (2017) Copper Deposition on RP Parts: An Experimental Investigation. PhD thesis.
Panda, Raunak Kumar (2017) Enhancing the Capability & Competency of Vendors for Continual Improvement in their Safety Performance at Tata Steel. MTech thesis.
Parida, Asit Kumar (2017) Heat Assisted Machining of Nickel Base Alloys: Experimental and Numerical Analysis. PhD thesis.
Parthasarathi, S. (2017) A Safety Project Report on Hazard Identification and Risk Assessment of Steel Melting Shop. MTech thesis.
Patel, Bhanupratap (2017) An Experimental Investigation of Ultrasonic Spot Welded Dissimilar Joint of 304SS to Al3003 With Interlayer. MTech thesis.
Patel, Pooja (2017) A Study on Thermal Behaviour of Carbon Black Filled Epoxy Composites. MTech thesis.
Pedada, Sudheer Kumar (2017) CFD Analysis of Double Pipe Helical Coil Heat Exchanger With Micro-fin Inserts. MTech thesis.
Pradhan, Piyus (2017) Hazard Identification and Risk Assessment at New Plate Mill, RSP Rourkela. MTech thesis.
Pradhan, Subhrajit (2017) Moisture Absorption Behavior and its Effect on Mechanical Properties of Orange Peel Reinforced Polymer Composites. MTech thesis.
Pradhan, Swastik (2017) Investigation of Machinability of Titanium Alloy (Grade 5): Experimental and Numerical Analysis. PhD thesis.
Prajapati, Vivekanand (2017) Design and Analysis of Dual-Bed Helium-Purifier operating at 80K Temperature for Helium Refrigerator/Liquefier. MTech thesis.
Purohit, Saswat (2017) Design and Analysis of Diffuser for Helium Turboexpander. MTech thesis.
Rajkonwar, Amit (2017) Investigation into mechanical and tribological properties of Lantana Camara particulate reinforced epoxy composite. MTech thesis.
Rizwan, Syed (2017) Mechanical and Thermal Analysis of Filament Wound Composite Materials. MTech thesis.
Roy, Abhranil (2017) Design and Development of Radial Turbine for a Helium Liquefier. MTech thesis.
Sahoo, Bibekananda (2017) Enhancement of Thermal Insulation Property of Epoxy Based Composites Using Short Natural Fibers. MTech thesis.
Sahoo, Chinmaya Kumar (2017) Development of TiC Based Wear Resistance Composite Coating on AISI 304 Steel by Pulsed Laser and TIG Cladding Process. PhD thesis.
Sahoo, Manas Kumar (2017) Design and Stability Analysis of Biped Robot with Walking Pattern Synthesis. MTech thesis.
Sahoo, Partha Sarathi (2017) Free Vibration and Buckling Analysis of Glass Fibers Reinforced Aluminium Laminated Epoxy (GLARE) Composites. MTech thesis.
Sahu, Bighnesh Kumar (2017) Electro-Discharge Machining of Super Alloy Inconel 718: Emphasis on Material Removal Efficiency and Surface Integrity of the End Product. MTech thesis.
Sahu, Chinmaya Pratik (2017) Observation, Work at Height, Behavior Based Safety and Safety Precaution taken in Coke Oven Plant. MTech thesis.
Sahu, Jyoti (2017) Risk Assessment and Safety Measures for Different Activities at Blooming & Billet Mill, Rail & Structural Mill of Bhilai Steel Plant, Chhattisgarh. MTech thesis.
Sahu, Om Prakash (2017) Design and Development of Sensor Integrated Robotic Hand. PhD thesis.
Sahu, Vaneshwar Kumar (2017) Modelling and Prediction of Fatigue Crack Growth in Part-Through Cracked Pipes under Bending Load. PhD thesis.
Samanta, Abinash (2017) Numerical Analysis on Biomass Gasification in a Fluidized Bed Gasifier. MTech thesis.
Satpathy, Mantra Prasad (2017) Ultrasonic Spot Welding of Dissimilar Metal Sheets: An Experimental, Numerical and Metallurgical Investigation. PhD thesis.
Sen, Dilip Kumar (2017) Analysis of Decision Support Systems of Industrial Relevance: Application Potential of Fuzzy and Grey Set Theories. PhD thesis.
Shaik, Jakeer Hussain (2017) Studies on Design of Spindle-tool System and Their Effects on Overall Milling Process Stability. PhD thesis.
Sharma, Abhishek (2017) Investigations of a Direct Injection Diesel Engine Run on Non Petroleum Fuel Blends. PhD thesis.
Sharma, Rahul (2017) Drilling of Inconel Superalloy: A Numerical Modelling. MTech thesis.
Sharma, Sujeet (2017) Effect of Perfluorohexane Layer on Tissue Necrosis. MTech thesis.
Shende, Chakresh Yashwant (2017) Design and Analysis of Liquid He Transfer Line. MTech thesis.
Shereef , Amal Hisham E. (2017) A Reduced Model of Higher Order Viscoelastic Rotor Using Modified SEREP. MTech thesis.
Shial, Satya Ranjan (2017) Development of Ti-TiC Composites by Powder Metallurgy Route Using Recycled Machined Ti Chips. MTech thesis.
Shukla, Ajay (2017) Hazard Identifications and Risk Assessment at Steel Melting Shop in JSW Steel Mumbai. MTech thesis.
Singh, Deepak (2017) Free Vibration and Buckling Analysis of Carbon Laminated Aluminium Reinforced Epoxy. MTech thesis.
Singh, Pravin (2017) Numerical Investigation of Lmni5 Based Solid State Hydrogen Storage Device. MTech thesis.
Singh, Ved Prakash (2017) Studies on Effect of Rotor Crack on Dynamics Characteristic Using Numerical Methodology. MTech thesis.
Sonavane, Sagar Sambhaji (2017) Vibration Energy Harvesting from Piezoelectric Laminated Cantilever Beam. MTech thesis.
Srivastava, Tushar (2017) CFD Analysis of Fin and Tube Heat Exchangers using ANSYS CFX. MTech thesis.
Suman, Sharda Devi (2017) Effect of Nano Magnetostrictive Particle on the Vibration Response of Polymer Composite. MTech thesis.
Thrinadh, Jadam (2017) Experimental Investigation on EDM of Inconel 718 Alloy Using Triangular Cross Sectioned Copper Tool Electrode. MTech thesis.
Tirkey, Nirmal (2017) Investigation of Various Machining Characteristics Of AISI 4340 Hardened Alloy Steel With Different Uncoated Cermet Inserts. MTech thesis.
Tirupataiah, Kasani (2017) Effects of Surface Treatment and PVD ta-C Coated Tool on Properties and Performance Evaluation during Dry Turning of Al 7075-T6 Alloy. MTech thesis.
Tiwari, Nishant (2017) Recovery of Waste Heat from Pyrolysis Reactor. MTech thesis.
Tudu, Kapura (2017) Experimental Studies of a Direct Injection Diesel Engine Fuelled with Light Fraction Pyrolysis Oil-Diesel Blend. PhD thesis.
V, Rahees Mohammed Kurikkal O. (2017) Risk Mitigation in Major Hazard Scenarios Through Process Safety Management and Barrier Analysis. MTech thesis.
Verma, Akash (2017) Turning of Superalloy- A Numerical Modelling. MTech thesis.
Verma, Navneet Kumar (2017) Design and Control of 7 Degree of Freedom Redundant Manipulator Arm using V-REP. MTech thesis.
Verma, Vikas Kumar (2017) Numerical Study of Porous Parabolic - Finned Receiver for Solar Parabolic- Trough Concentrator. MTech thesis.
Yadav, Upendra Kumar (2017) Design of Turbine for Cryogenic Turboexpander Used for Helium Liquefaction. MTech thesis.
This list was generated on Sat Apr 20 16:15:22 2024 IST.
