Items where Subject is "Engineering and Technology > Mechanical Engineering > Cryogenics"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type
Jump to: . | A | B | C | D | F | G | I | J | K | L | M | N | P | R | S | T | V | Y
Number of items at this level: 115.

.

., Anil Kumar (2018) Thermal and AC-DC Characterization of 2nd Generation High
Temperature Superconducting Tape for the Development of
Superconducting Fault Current Limiter.
MTech thesis.

A

Aadhithiyan , A K (2018) Studies on Hard Chrome Plating on Cylinder Liner of Air Compressor and Numerical Analysis of Cascade Cooler for an Air Separation Unit. MTech thesis.

Addala, Sandeep (2015) Design and Modeling of Vacuum Pumping Systems for Laboratory Scale Applications. MTech thesis.

Akash, Pandey (2011) Performance analysis of a compact heat exchanger. MTech thesis.

Alur, Sidramappa (2012) Experimental studies on plate fin
heat exchangers.
PhD thesis.

Amarthaluri, Lalitha Jyothi (2017) CFD Analysis of Turbine of a Turboexpander. MTech thesis.

B

B, Aarif (2013) Simulation of 1610 Helium Liquefier. MTech thesis.

Behera, Adarsh Kumar (2014) Design and Analysis of Internal 20 K Helium Gas Purification System for the kW Class Helium Refrigerator/Liquefier. MTech thesis.

Behera, Ranjit (2016) CFD Analysis of Aerostatic Bearing for Cryogenic Turbo-Expander. MTech thesis.

Behera, Suraj Kumar (2017) Tribology and Rotordynamics of Small High-Speed Cryogenic Turboexpander. PhD thesis.

Behera , Anita (2018) Design, Fabrication and Testing of HTS-based Current Lead used for Cryogenic Application. MTech thesis.

Bhunya, D K (2014) Simulation study of cryogenic air separation unit using Aspen Hysys at Rourkela steel plant. MTech thesis.

Bhushan, Jitendra (2011) Helium Purification by Gas Adsorption method. MTech thesis.

Bishoyee, N (2010) 3-D Modeling and Rapid Prototyping of a Cryogenic Liquefier. BTech thesis.

Biswal , Rasmikanti (2015) Conjugate Heat Transfer Analysis in Cryogenic Microchannel Heat Exchanger. MTech thesis.

C

Chakraborty, Debashish (2017) Chilldown Process in Cryogenic Transfer Line. MTech thesis.

Choudhury, Balaji Kumar (2009) Process Design of Turboexpander based nitrogen Liquefier. MTech thesis.

D

Dalai , Sisir Kumar (2013) Numerical analysis of diaphragm type pulse tube refrigerator. MTech thesis.

Dansana, Kalyani (2016) Design of Blade Profile for Inward Flow Radial Turbine. MTech thesis.

Das, Harish Chandra (2009) Intelligent Diagnosis and Smart Detection of Crack in a Structure from its Vibration Signatures. PhD thesis.

Dash, S M (2009) Study of Cryogenic Cycles with Aspen-Hysys Simulations. BTech thesis.

Dewatwal, Jainender (2009) Design of Compact Plate Fine Heat Exchanger. BTech thesis.

Dhakarwal, Mukesh (2014) Development of ccr based variable temperature insert for cryogen free superconducting magnet system. MTech thesis.

Dhananjay , Adarsh (2018) Effects of Various Nanofluids on Different Machinability Aspects of AISI 4340 Hardened Alloy Steel. MTech thesis.

Dimri, Hitesh (2013) Computational Fluid Flow Analysis of Cryogenic Turboexpander. MTech thesis.

Dutta, Shounak (2014) Modelling and analysis of resistive superconducting fault current limiter. MTech thesis.

F

Francis, Abel Christena (2017) Numerical Simulation of Dual Bell Nozzle for Rocket Engines. MTech thesis.

G

Ghosh, S K (2008) Experimental and Computational Studies on Cryogenic Turboexpander. PhD thesis.

Goel, Anuj Kumar (2018) Upgradation of Bio-Gas Using Cryogenic Upgradation Technique. MTech thesis.

Gupta, Ajay Kumar (2018) Performance of Plate Fin Heat Exchanger at Cryogenic Temperature. PhD thesis.

I

Isaac Ivo , de Souza (2018) Development of a Stirling cycle based cryocooler. MTech thesis.

J

Jadhav, N (2014) Analysis of cooling capacity and optimization of compressor outlet pressure for KW class helium refrigerator/liquefier. MTech thesis.

Jagat, Keshab (2015) Numerical Simulation of Jet Impingement Cooling on a Pin-Fin. MTech thesis.

Jha , Abhishekh Kumar (2013) CFD Simulation of a Small Stirling Cryocooler Using Non-Thermal Equilibrium Model. BTech thesis.

Jogee, Sourabh Sadanand (2016) Design and Analysis of Expansion Wheel for Low Temperature Helium Turbine. MTech thesis.

K

K B, Ashita (2017) Design and Optimization of Heat Exchanger for Cooling of Supercritical Helium Using Boiling Liquid Helium. MTech thesis.

K., Prakash (2017) Numerical Investigation on Single Stage Co-Axial Pulse Tube Refrigerator. MTech thesis.

Khandual, Abinash (2016) CFD Analysis of Stirling Type Inertance Tube Pulse Tube Refrigerator. MTech thesis.

Kujur, Anjuni (2016) CFD Simulation of Inertance-Tube Pulse Tube Refrigerator with Variable Cross Section of Regenerator and Pulse Tube. MTech thesis.

Kukkala, Vivekananda (2019) Ultrasonic Vibration Assisted Turning of a Nickel-based Superalloy: Acoustic Horn Design, Experimental Investigations and Numerical Analysis. PhD thesis.

Kumar, Bathina siva (2015) Comparative Study among Different Cryoprobe Configuration for Effective Necrosis of Biological Tissue. MTech thesis.

Kumar, Chandan (2017) Studies on a Shell and Tube Heat Exchanger Using CFD. MTech thesis.

Kumar, Jitesh (2017) Numerical Analysis of Regenerator and Stirling Type Pulse Tube Cryocooler. MTech thesis.

Kumar, M (2014) Phasor analysis of GM-type double Inlet pulse tube refrigerator. BTech thesis.

Kumar, Manoj (2015) Experimental Analysis of Solidification and Remelting of Brine Solution Over a Cryocooled Sphere. MTech thesis.

Kumar, Mukesh (2015) Investigation of Magnetic Force in Metallic Structure of Superconducting Magnet. MTech thesis.

kumar, V B (2014) Control of a Superconducting Magnetic Energy Storage unit for Synchronous Generator Damping Enhancement. MTech thesis.

Kumar , Ashish (2014) Design and Development of Cryocooler Based Liquid Nitrogen Plant. MTech thesis.

Kumar , Kamlesh (2017) Design and analysis of Cold Box for Helium Liquefier / Refrigerator. MTech thesis.

Kumar , Ravindra (2013) CFD Simulation of a Small Stirling Cryocooler. BTech thesis.

L

Lahare, Pushpendra Bahadur Singh (2016) Analysis of Rectangular Channel Printed Circuit Heat Exchanger(PCHE). MTech thesis.

M

Mahapatra, Omshree (2014) Design Of 3-Stream(He-He-He) Plate-Fin Heat Exchanger For Helium Plant. MTech thesis.

Maiti, Trijit Kumar (2011) Development and Study of a Helium Purifier based on Low Temperature High Pressure Adsorption of Impurities. MTech by Research thesis.

Mandal, Ritesh (2017) Development of MATLAB Based Dynamic Model of the Helium Liquefier / Refrigerator. MTech thesis.

Manoj, K N Sai (2016) Experimental Studies Towards Development of a Single Stage High Refrigerating Capacity G-M Type Pulse Tube Refrigerator. MTech by Research thesis.

Mishra, Ashutosh (2015) Analysis and Optimization of Process Parameters of Heat Exchangers and Turbines for Helium Refrigerator/Liquefier. MTech thesis.

Mishra, Snehlata (2017) An Experimental study on solidification of a binary Mixture inside a Cryovial. MTech thesis.

Mishra , Vivek Kumar (2018) Development of A Test Facility and Measurement of Performance of A Three Stream (He/He/He) Plate Fin Heat Exchanger. MTech thesis.

Mohanty, Biswaranjan (2009) Development of experiments on vacuum technology. BTech thesis.

Mohanty, Chinmaya Prasad (2015) Studies on Some Aspects of Multi-objective Optimization: A Case Study of Electrical Discharge Machining Process. PhD thesis.

Mohanty, Salil (2016) Computational Flow Analysis of Cryogenic Turboexpander. MTech thesis.

Mohapatra, Dhiren (2015) Design and Analysis of Aerostatic Bearings of Cryogenic Turbines for Helium Refrigerator/Liquefier. MTech thesis.

Mudgala , Sandeep (2015) Numerical Analysis of Plate Fin Heat Exchanger at Cryogenic Conditions. MTech thesis.

N

Nadaf, Arman Mohaddin (2016) Quench Protection System of Superconducting Quadrupole Magnet: Simulation and Experimental Studies. MTech thesis.

Naik, Deepak Kumar (2019) Investigation and Optimization of Plasma Arc Cutting Process. PhD thesis.

Nashine, Chandan (2018) Design and Analysis of LOX Pump for 10 Tonne Thrush LCH4-LOX Cryogenic Engine. MTech thesis.

Nayak, Asutosh (2010) Development of design software for Cryogenic Turbo Expander. BTech thesis.

Nayak, Saurav Kumar (2017) Electrical and Thermal Behaviour of High Temperature Superconductors for SFCL Applications. MTech thesis.

Nayak, Soumya Ranjan (2017) Design and Analysis of a Methane Pump for 10 Ton Class Rocket Engine. MTech thesis.

Nayak , Praveen Kumar (2018) Effect of Process Parameters on the Mechanical Behaviour of FDM and DMLSBuild Parts: an Experimental Investigation. MTech thesis.

P

P.S., Shihabudeen (2014) Design of rotary, turbo-molecular and cryo-sorption pumping systems for vacuum laboratory. MTech thesis.

Panda, Debashis (2016) Mathematical Modelling and Design Software for Pulse Tube Cryocoolers. MTech by Research thesis.

Panda, Samarendra (2015) Numerical Analysis of Double Inlet Pulse Tube Refrigerator. MTech thesis.

Panda, Sandeep Ranjan (2016) Study and Design of Helium Scroll Compressor. MTech thesis.

Patnaik, Kishore Chandrasekhar and Soni, Manish (2007) 3-D Solid Modeling of Screw and Scroll Compressors Including Animation. BTech thesis.

Penthia, Trilochan (2014) Design and modelling of vacuum experimental set-ups. MTech thesis.

Posa, Lokesh (2016) Design and Performance of Helium Liquefier based on GM Cryocooler. MTech thesis.

Pradhan, Bidhan Kumar (2009) Computational Fluid Dynamics Analysis of Flow in High Speed Turbine using Fluent. BTech thesis.

Pradhan , Diptimayee (2018) CFD Analysis of Regenerator of a GM cryocooler. MTech thesis.

Prajapati, Vivekanand (2017) Design and Analysis of Dual-Bed Helium-Purifier operating at 80K Temperature for Helium Refrigerator/Liquefier. MTech thesis.

Prasad, Shailesh (2009) Simulation of Nitrogen Liquefication Cycles. MTech thesis.

Purohit, Saswat (2017) Design and Analysis of Diffuser for Helium Turboexpander. MTech thesis.

R

Rajpuriya, Vishnu (2015) Analysis of Solidification and Remelting of Water Over a Cryocooled Sphere Through Natural Convection. MTech thesis.

Ramana , Kukarasi (2018) Development of Cryogenic Helium Turboexpander. MTech thesis.

Rao, K Sudhakara (2007) Analysis of flow maldistribution in tubular heat exchangers by fluent. MTech thesis.

Rawat, Vivek Kumar (2009) Theoretical and Experimental Studies on Pulse Tube Refrigerator. BTech thesis.

Rout, Sachindra Kumar (2015) Design and Analysis of Pulse Tube Refrigerator. PhD thesis.

Roy, Abhranil (2017) Design and Development of Radial Turbine for a Helium Liquefier. MTech thesis.

Roy, Bibartan (2010) Numerical Analysis in a Thermoacoustic Cryocooler. BTech thesis.

S

S , Sujaykhosh (2018) Effect of Silicon Carbide as Filler Reinforcement on the Damping properties of Glass-Fibre Epoxy Composites. MTech thesis.

Sahoo, Mitravanu (2015) Experimental and Numerical Studies on Plate Fin Heat Exchanger. MTech thesis.

Sahoo, Somadutta (2010) Process design of cryogenic system using ASPENHYSYS simulation. BTech thesis.

Sahu, A B (2010) CFD Simulation of a Small Stirling Cryocooler. BTech thesis.

Sahu, Akash Kumar (2018) Performance Study of Cryogenic Turboexpander Using Gas Foil
Bearing.
MTech thesis.

Sahu, Hulash Ram (2015) Design of Auxiliary Passive Magnetic Bearing for Cryogenic Turboexpander. MTech thesis.

Sahu, Sudhanshu Shekhar (2015) Axial Back Conduction in Cryogenic Fluid Microtube. MTech thesis.

Sarangi, S K (2006) Experimental and Computational Studies on Oil Injected Twin-Screw Compressor. PhD thesis.

Senthooran, Ravikumar (2014) Computational Fluid Flow analysis in Cryogenic Turbo expander. BTech thesis.

Shariq, Sk Avez (2016) A CFD Simulation of High Altitude Testing of the Cryogenic Engine. MTech thesis.

Sharma, Sujeet (2017) Effect of Perfluorohexane Layer on Tissue Necrosis. MTech thesis.

Sheelvardhan, K (2014) Analysis and simulation of superconducting magnetic energy storage system. MTech thesis.

Shende, Chakresh Yashwant (2017) Design and Analysis of Liquid He Transfer Line. MTech thesis.

Shrivastava, Raj (2014) HTS inductive energy controlled discharging circuit & its application in the design of UPS. MTech thesis.

Singh, Abhishek Kumar (2018) Developent of Helium Re-condenser for 1.5 T ZBO MRI Scanner. MTech thesis.

Singh, Anurag and Singh, Prashant (2012) CFD Analysis of Stirling Cryocoolers. BTech thesis.

Sinha, Vishal Anand (2016) A Parametric Study on the Cryosurgery of Gel Mimicking Tissue Phantoms. MTech thesis.

Soni, Vijay Kumar (2015) Experimental Studies on Thermal Behavior of 6T Cryogen-Free Superconducting Magnet System. MTech thesis.

Sukhdeve, Chandrakant S (2015) Experimental Set Up for Vacuum Laboratory. MTech thesis.

Suman, Navneet Kumar (2015) Liquefaction of Helium and Nitrogen with GM Cryocooler. MTech thesis.

T

Thomas, Basil George (2016) Thermo-Hydraulic Simulation of Oxidizer Booster Turbopump for Semicryogenic Engine. MTech thesis.

Tiwari, Nishant (2019) Conjugate Heat Transfer in Single-Phase and Two-Phase Flow Boiling in Mini/ Microchannels. PhD thesis.

V

V, Devaraj and Chhabra, Yatin (2011) Mathematical and Optimization Analysis of a Miniature Stirling Cryo-cooler. BTech thesis.

V, Venkatesh and R, Chandru (2007) Experimental Study of Pulse Tube Refrigerators. BTech thesis.

Vishwakarma, Bipin Kumar (2016) Modeling of 2m Single Phase High Temperature Superconducting Power Cable. MTech thesis.

Y

Yadav, Upendra Kumar (2017) Design of Turbine for Cryogenic Turboexpander Used for Helium Liquefaction. MTech thesis.

This list was generated on Sat Dec 14 13:40:20 2019 IST.