Items where Subject is "Engineering and Technology > Mining Engineering > Open Cast Mining"
Group by: Creators | Item Type
Number of items at this level: 64.
Kerketta, Suraj (2013) Modeling for the Steady State Production of Large Open Cast Mines- Case Study. BTech thesis.
Agarwal, Vishal Kumar (2009) Geotechnical Investigation of Coal Mine Refuse for Backfilling in Mines. BTech thesis.
Agrawal, Harshit (2012) Modeling of opencast mines using Surpac and its optimization. BTech thesis.
Asdaque, PMG Shohood (2016) Instrumentation for Real Time Monitoring of Slope Stability in Opencast Mines Using Arduino Based System. MTech thesis.
Behera, Banita (2013) Experimental And Numerical Investigation Into Behaviour Of Fly Ash Composite Material In The Subbase Of Surface Coal Mine Haul Road. PhD thesis.
Behera , Pir Mohan (2007) Present status of solid waste management and its future need. BTech thesis.
Brahma, K C (2007) A Study on Application of Strategic Planning And Operations Research Techniques in Open Cast Mining. PhD thesis.
Chakravarty, Raj (2013) Study of Stability of Overburden Dumps Mixed with Flyash in an Opencast Coal Mine. BTech thesis.
Chauhan, Arvind Kumar (2018) Assessment of Water Quality Indices of Some Opencast Mines. MTech thesis.
Choudhary, S S K and Ranjan, Ravi (2014) Blast vibration monitoring in opencast mines. BTech thesis.
Chowdhury, Olive (2014) DESIGN OF ILLUMINATION SYSTEM FOR AN OPENCAST COAL MINING PROJECT–A CASE STUDY. MTech thesis.
Dandapat, Prasanjit (2016) Application of Schmidt Rebound Number for Estimating Coal Strength. BTech thesis.
Das, Anshuman (2012) Mining Machine Reliability Analysis Using
Das, Bitanshu (2012) Open Pit Production Scheduling applying Meta Heuristic approach. BTech thesis.
Das, Sidharth and Chakraborty, Suman (2007) Development of computer based equipment performance monitoring systems in open cast mines. BTech thesis.
Dutta, Abhijeet (2016) Application of Soft Computing Techniques for Prediction of Slope Failure in Opencast Mines. MTech thesis.
Dutta, Samrat (2012) Application of Surface Miner in Indian Coal Mines. BTech thesis.
Gaikwad, Sudhir Laxman (2017) Optimization of Performance Monitoring of Equipment to Increase the Productivity from Large Opencast Mine. MTech thesis.
Ghorai, Uttam (2011) Production Optimization and Simulation of large Open Cast Mines. MTech by Research thesis.
Harish, Y N (2016) Prevention of Unauthorized Transport of Ore in Opencast Mines Using Automatic Number Plate Recognition. MTech thesis.
Jain, Saurabh (2007) Environmental and safety risk assessment in mines. BTech thesis.
Jha, Nandan Kumar (2017) Assessment of Whole Body Vibration Exposure of Mining Operators in Opencast Mines. MTech thesis.
Joshi, Devendra (2018) Stochastic Open Pit Mine Production Scheduling under Geological Uncertainties. PhD thesis.
Khan, Kamaul Hoque (2015) Development of Automatic Digitization of Truck Number in Open Cast Mines Using Microcontroller. MTech thesis.
Khan, Roshan (2016) Analysis of Different Slope Features and to Develop Stable Slope Models for Opencast Mine Using FLAC Slope. MTech thesis.
Kishore, Kaushal (2015) Ambient Air Quality Modelling Using Aermod and Particulate Matter Characterization in Opencast Mines. MTech thesis.
Kumar, Deepak (2015) Numerical Modelling and Field Monitoring of Stability of Cut Slopes. BTech thesis.
Kumar, Pradeep (2013) Performance Appraisal of Equipments in Opencast Mines. BTech thesis.
Kumar, Sri Ankit (2014) Dragline performance study in indian coal mines. BTech thesis.
Mallick, Soumya Ranjan (2012) Development and Evaluation of Clinker Stabilized Fly Ash Based Composite Material for Haul Road Application. MTech by Research thesis.
Manadhata, Chitransu (2013) Modeling for the steady state production of large open cast mines- case study. BTech thesis.
Mirdha, Santosh Kumar (2012) Investigation into Role of Intrinsic Factors in
Mishra, Ashutosh (2009) Designing of Surface Blasts - A Computational Approach. BTech thesis.
Mohanta, Debashrit (2015) Determination of Some Bench Blast Parameters Using Voronoi Diagram Concept. MTech thesis.
Nag, Soumyakant (2013) Evaluation of dragline mining in Indian coal mines. BTech thesis.
Nandan, Seethiraju Eswar (2015) Performance Assessment of Surface Miner in Indian Coal Mines. MTech thesis.
Nayak, Nirlipta Priyadarshini (2008) Characterization and Utilization of Solid Wastes Generated From Bhilai Steel Plant. MTech thesis.
Nayak, Prashant Kumar and V, Srikrishnan (2007) Strength development of fly ash based composite material. BTech thesis.
Pal, laxman (2015) Slope Stability Analysis of Open Cast Manganese Ore Mine- Dongri Buzurg Moil. MTech thesis.
Parida, Satyajeet (2015) Design of Illumination System for an Opencast Manganese Mine. MTech thesis.
Pradhan, Premananda (2009) Development of a Computer Program for selection of Optimum Mode of Operation for Surface Miner. BTech thesis.
Pradhan, S (2014) Stability analysis of open PIT slope using FLAC. BTech thesis.
Pradhan, Samresh Kumar (2016) A Neural Network Approach for the Prediction of Ground Vibrations Induced Due to Blasting. MTech thesis.
Pragyan, Arya (2012) Evaluation of blasting in an opencast mine. BTech thesis.
Prakash, Bisleshana Brahma (2009) Design of Stable Slope for Opencast Mines. BTech thesis.
Ram, Pankajkumar Kanchan (2016) Development of a Needle Penetrometer Device and Evaluation of its Performance. MTech thesis.
Rao, Debashis (2015) Design of Stable Slopes for Dumps Admixture with Flyash. BTech thesis.
Rath, Debasis (2012) Application of inhibitors to prevent spontaneous heating of coal. BTech thesis.
Reddy, Challa Dinesh (2013) Evaluation of Truck Dispatch System and its Application using GPS in Opencast Mines- a Case Study of Indian Mines. BTech thesis.
Sahoo, Abhijit (2013) Suitability Study of Surface Miner in Indian Coal Mines. BTech thesis.
Sahoo, Bishnu Prasad (2018) Characterization of Overburden and Fly ash Materials for Back filling in Opencast Coal Mines vis-a-vis Hydrogeochemical Analysis – A Case Study. PhD thesis.
Sahoo, Soubhagya (2012) Truck allocation model using linear programming and queueing theory. BTech thesis.
Sahu, Atma Ram (2015) Performance Study & Evaluation of Electrical Parameter of Dragline in Open Cast Mines. MTech thesis.
Sahu, Rajat Kumar (2012) Application of ripper-dozer combination in surface mines: its applicability and performance study. BTech thesis.
Sarkar, Saptarshi (2009) Development of a Computer Oriented Algorithmic Approach for Opencast Mine Dispatch System. BTech thesis.
Sharma, Nitin (2018) Performance Analysis of Heavy Earth Moving Machineries (hemm) in Opencast Mines. MTech thesis.
Singh, Manish (2013) Suitability study of ripper-dozer combination in Indian mines. BTech thesis.
Soren, Masa (2010) Effects of faults on slope stability in opencast mines. BTech thesis.
Suman, Sandeep (2015) Slope Stability Analysis Using Numerical Modelling. BTech thesis.
Tripathi, Jitendra Kumar (2017) Slope Stability Analysis of Open Cast Mines Using FLAC 3D. MTech thesis.
Upadhyay, Ankur and Kamal, Manish (2007) Characterization and utilization of fly ash. BTech thesis.
Varwade, Kartik (2015) Pit Slope Stability Analysis at Rajpardi Lignite Open Cast Mine, Gujarat. MTech thesis.
Vemana, Balaji Vemana (2012) Performance Appraisal of Dragline Mining in India. BTech thesis.
Vora, J (2010) Dust Dispersion Modeling For Opencast Mines. BTech thesis.