Browse by Thesis Type

Thesis

Puthal, D K (2008) Quality of Service Provisioning with modified IEEE 802.11 MAC Protocol. MTech by Research thesis.

Gajbhiye, M R (2008) Fuzzy Inference Based Adaptive MMSE-MRC Multiuser Detection of DS-CDMA Signals. MTech by Research thesis.

Mohapatra, Subrajeet (2008) Development of Impulsive Noise Detection Schemes
for Selective Filtering in Images. MTech by Research thesis.

Nandi, Mrinal (2008) A Technique to Minimize Contention in Optical Burst Switching Networks. MTech by Research thesis.

Mohanty, Debidutta (2008) Channel Equalization using GA Family. MTech by Research thesis.

Pani, Sanjibani (2008) Some Aspects of Performance Appraisal of Aluminum - Silicon Carbide Particulate (SiCp) Metal Matrix Composite. MTech by Research thesis.

Nanda, Satyasai Jagannath (2009) Artificial Immune Systems: Principle, Algorithms and Applications. MTech by Research thesis.

Ekka, A A (2007) Fault Tolerant Real Time Dynamic Scheduling Algorithm For Heterogeneous Distributed System. MTech by Research thesis.

Sa, Pankaj Kumar (2006) On the Development of Impulsive Noise Removal Schemes. MTech by Research thesis.

Pattnaik, Sunil Kumar (2006) Development of Low Power Image Compression Techniques. MTech by Research thesis.

Mohanty, Alekhika (2006) Study and Implementation of Watermarking Algorithms. MTech by Research thesis.

Mishra, Saroj Kumar (2006) Design , Development and Performance Evaluation of Intelligence Sensors. MTech by Research thesis.

Mohapatra, Deepak (2006) Processing of Ceramics and Study of its Microstructure, Strength and Thermal Shock resistance. MTech by Research thesis.

Bhanja, Ipsita (2006) Performance Evaluation of Phase Optimized Spreading Codes in Non Linear DS-CDMA Receiver. MTech by Research thesis.

Vamsi Krishna, T (2006) Development Of Novel Neuro-Fuzzy Techniques For Adaptive Systems. MTech by Research thesis.

Mohanta, Laxmi (2006) Dynamic Stability of a Sandwich Beam Subjected to Parametric Excitation. MTech by Research thesis.

Subudhi, Badri (2009) Video Image Segmentation and Object Detection Using Markov Random Field Model. MTech by Research thesis.

Subhashini, K R (2008) Development of a Novel Equaliser for Communication Channels using Tabu search Technique in Neural Network Paradigm. MTech by Research thesis.

Tarangini, K (2009) Biosorption of Heavy Metals using Individual and Mixed Cultures of Pseudomonas Aeruginosa and Bacillus Subtilis. MTech by Research thesis.

Parihari, Arati (2009) Performance Study of Spray Dryer Using Various Salt Solutions. MTech by Research thesis.

Swain, A K (2010) Design and Verification of WISHBONE Bus Interface for SOC Integration. MTech by Research thesis.

Rao, K Jagajjanani (2009) Solubilization and Biodegradation of Naphthalene in Presence of Sapindus Mukorossi − Synthetic Mixed Surfactant Systems. MTech by Research thesis.

Das, Alok Prasad (2009) Bioreduction based Bioremediation of Hexavalent Chromium Cr (VI) through Potential Indigenous Microbes. MTech by Research thesis.

sudeendra, SK (2009) Controller Area Network: its Interface, Applications and ASIC Implementation. MTech by Research thesis.

Kumari, Nirulata (2009) Study and Development of Some Novel Image Segmentation Techniques. MTech by Research thesis.

Swain, S K (2008) Effect of Chemistry and Processing Variables on the
Mechanical Properties of Thin-wall Ductile Iron Castings. MTech by Research thesis.

Nayak, Nadia Bihari (2010) Fabrication & Tribological Behaviour Of Feather Reinforced Polymer Composites. MTech by Research thesis.

Sahu, Shitarashmi (2010) Bio-Mineral Processing: A Suitable Approach. MTech by Research thesis.

Mohanty, Sanatan (2010) Energy Efficient Routing Algorithms for Wireless Sensor Networks and Performance Evaluation of Quality of Service for IEEE 802.15.4 Networks. MTech by Research thesis.

Guha, Devi Rani (2011) Artificial Neural Network Based Channel Equalization. MTech by Research thesis.

Chakraverty, Ananta Prasad (2010) Response of E-Glass/Epoxy Composite to Up and Down-Thermal Shocks under the Influence of Varying Environmental Condition. MTech by Research thesis.

Maiti, Trijit Kumar (2011) Development and Study of a Helium Purifier based on Low Temperature High Pressure Adsorption of Impurities. MTech by Research thesis.

Ashe, Barnali (2011) A Detail investigation to observe the effect of zinc oxide and Silver nanoparticles in biological system. MTech by Research thesis.

Ojha, Shakuntala (2009) CFD Analysis on Forced Convection Cooling of Electronic Chips. MTech by Research thesis.

Sahoo, Nirjharini (2009) Investigation of Power Factor Correction in Single Phase AC-DC Converters. MTech by Research thesis.

Mehrotra, Hunny (2010) Iris Identification using Keypoint Descriptors and Geometric Hashing. MTech by Research thesis.

K, Aroul (2009) Development of efficient power supply For low voltage high current Applications. MTech by Research thesis.

Sharma, Surajit (2009) Generation of Optimized Robotic Assembly Sequence using Soft Computing Methods. MTech by Research thesis.

Kumar , Dhiraj (2009) Study On Clustering Techniques And Application To Microarray Gene Expression Bioinformatics Data. MTech by Research thesis.

Sahu, Santosini (2008) Development of Alternative Methods for Robot Kinematics. MTech by Research thesis.

Pattnayak, Priyadarsini (2010) Excipient Mediated Biostabilization of Protein Using Spray Drying Technique. MTech by Research thesis.

Dash, Rudra Narayan (2010) Fault Diagnosis in Induction Motor Using Soft Computing Techniques. MTech by Research thesis.

Shadangi, Krushna Prasad (2010) Liquid Fuel From Bio-Mass. MTech by Research thesis.

Pradhan, Smita (2010) Development of Unsupervised Image Segmentation Schemes for Brain MRI using HMRF model. MTech by Research thesis.

Mohapatra, Srabani (2009) A New Approach for Performance Improvement of OFDM System using Pulse Shaping. MTech by Research thesis.

Das, Rashmi Rekha (2010) Effect of Micron and Nano MgAL2O4 Spinel Addition on the Properties of Magnesia-Carbon Refractories. MTech by Research thesis.

Sahu, Bhabani Sankar (2010) Development of Lithium Titanate Ceramic for the Test Blanket Module (TBM) in Fusion Reactor. MTech by Research thesis.

Barpanda, Soubhagya Sankar (2010) A Graph Coloring Approach to Dynamic Slicing of Object-Oriented Programs. MTech by Research thesis.

Mehar, Suraj Kumar (2009) Weathering Behaviour of Bagasse Fiber Reinforced Polymer Composite. MTech by Research thesis.

Pattnaik, Sushant Kumar (2010) Design and Implementation of a Soft Switched Inverter Based 400 Hz Power Supply. MTech by Research thesis.

Biswal, Baikuntha Narayan (2010) Test Case Generation and Optimization of Object-Oriented Software using UML Behavioral Models. MTech by Research thesis.

Das, Bikramaditya (2010) Performance Enhancement of Ultra Wideband WPAN using Narrowband Interference Mitigation Techniques. MTech by Research thesis.

Das, Dushmanta Kumar (2010) Robustness Improvement by Dynamic State Feedback Stabilization. MTech by Research thesis.

Panda, Yashobanta (2010) Analysis Of Cascaded Multilevel Inverter Induction Motor Drives. MTech by Research thesis.

Biswal, Mousumi (2011) Control Techniques for DC-DC Buck Converter with Improved Performance. MTech by Research thesis.

Kavuri, Naga Chaitanya (2011) Data-Based Modeling: Application in Process Identification, Monitoring and Fault Detection. MTech by Research thesis.

Barick, Barun Kumar (2011) Studies Of Structural, Dielectric And Electrical Properties Of A/B Site Modified (Na0.5bi0.5)Tio3 Ceramic Oxides. MTech by Research thesis.

Rout, Kamalesh Chandra (2011) Dynamic Stability Enhancement of Power System Using Fuzzy Logic Based Power System Stabilizer. MTech by Research thesis.

Barpanda, Ravi Sankar (2011) A Multi-Objective ILP Formulation for RWA Problem in WDM Networks. MTech by Research thesis.

Bhuyan, Srinibas (2011) Development and Control of Networked Servo System. MTech by Research thesis.

Pattanaik, Mausumi (2011) Synthesis and Characterizations of Lead Free KNN Ceramics Near Morphotropic Phase Boundaries. MTech by Research thesis.

Gupta, Sanyukta (2011) Preparation and Characterization of Waste Silk Fiber Reinforced Polymer Composites. MTech by Research thesis.

Ghorai, Uttam (2011) Production Optimization and Simulation of large Open Cast Mines. MTech by Research thesis.

Sahu, Sasmita (2011) Vibration Analysis of Cracked Beam using Intelligent Technique. MTech by Research thesis.

Pradhan, Debalaxmi (2011) Recovery of value added fuels from waste polyolefins bicycle tyre and tube. MTech by Research thesis.

Panda, Anukul Chandra (2011) Parallel algorithms for iris biometrics. MTech by Research thesis.

Pati, Swagat (2011) Performance and Power Factor Improvement of Indirect Vector Controlled Cage Induction Generator in Wind Power Application. MTech by Research thesis.

S, Venkatesh (2012) Multi user chaotic communication systems using orthogonal chaotic vectors. MTech by Research thesis.

Mohanty, Satya Sundar (2012) Microbial Degradation of Phenol:A Comparitive Study. MTech by Research thesis.

Rajavathsavai, Divya (2012) Study of Hydrodynamic and Mixing Behaviour of Continuous Stirred Tank Reactor Using CFD Tools. MTech by Research thesis.

Mallick, Soumya Ranjan (2012) Development and Evaluation of Clinker Stabilized Fly Ash Based Composite Material for Haul Road Application. MTech by Research thesis.

Sharma, Vijay Kumar (2012) Efficient VLSI Architectures for Image Compression Algorithms. MTech by Research thesis.

Sahoo, Pranati (2012) Hydrodynamic Studies of Coarse, Fine and Nano Particles in a Cylindrical Fluidized / Spouted Bed: CFD Simulation. MTech by Research thesis.

Rout, Raja (2012) Control of Autonomous Underwater
Vehicles. MTech by Research thesis.

T , Rakesh Krishnan (2012) On Stabilization of Cart-Inverted Pendulum System: An Experimental Study. MTech by Research thesis.

Ray, Minaketan (2012) Synthesis and characterization of AgBr/SiO2 core/shell nanoparticles. MTech by Research thesis.

Choudhary, Abhisek (2012) Synthesis and characterization of lithium silicate ceramic for the test blanket module (tbm) in fusion reactors. MTech by Research thesis.

Muni, Bijaya (2013) Physical Layer Implementation of a class of
ZigBee Baseband Transceiver using FPGA. MTech by Research thesis.

Singh, Ankita (2012) Studies on some aspects of composite machining. MTech by Research thesis.

Tripathy, Rajesh (2013) Production of Hydrogen Gas from Biomass Wastes Using Fluidized Bed Gasifier. MTech by Research thesis.

Garapati, Vamsi Krishna (2012) Biodegradation of Petroleum Hydrocarbons. MTech by Research thesis.

Sahoo, Nirjharini (2012) Effect of Differential Roughness on Flow Characteristics in a Compound Open Channel. MTech by Research thesis.

Choudhary, Abhisek (2012) Synthesis and characterization of lithium silicate ceramic for the test blanket module (TBM) in fusion reactors. MTech by Research thesis.

Acharya, Sanghamitra (2012) Studies On Superconductor Nano Composite Of Bi2Sr2CaCu2O8/BiFeO3. MTech by Research thesis.

Tripathy, Rasmita (2012) Pushover Analysis Of R/C Setback
Bulding Frames. MTech by Research thesis.

Mishra, Srimant Kumar (2012) PROCESSING, CHARACTERIZATION AND EROSION WEAR RESPONSE OF PARTICULATE FILLED ZA-27 METAL MATRIX COMPOSITES. MTech by Research thesis.

Singh, S K (2013) Strata control technology for mass exploitation of underground coal deposits: a case study of continuous miner. MTech by Research thesis.

Dwivedi, A K (2014) Formalization and model checking of software architectural style. MTech by Research thesis.

Rout, S (2012) Techniques to enhance the MANET lifetime. MTech by Research thesis.

Narsimhachary, D (2014) Effect of laser welding parameters on 6061 aluminium alloy. MTech by Research thesis.

Patro, V.Balaji (2013) Bio-transformation of natural oil into industrially useful product (Lauric acid). MTech by Research thesis.

Sethy, R (2014) Experimental investigation and optimisation in EDM process of AISI P20 tool steel. MTech by Research thesis.

Raman, R (2013) Study on models for smart surveillance through multi-camera networks. MTech by Research thesis.

., Shivani (2013) Vapor-liquid equilibrium and thermodynamic property estimation of CO2 - alkanolamines - water system using molecular modeling and validation with experiments. MTech by Research thesis.

Pradhan, Arundhati (2012) Damping Of Bolted Beams With Unequal Thickness Ratio. MTech by Research thesis.

Jena, Swetananda (2012) Performance Improvement of Sensorless Direct
Field Oriented Induction Motor Drive with Sliding Mode and Fuzzy Sliding Mode Controllers. MTech by Research thesis.

Ray Singh, Meena (2012) Simulation of Runoff and Flood Inundation in Kosi River Basin using Hydrological models, ANN, Remote Sensing and GIS. MTech by Research thesis.

Choudhury, Sarat Chandra (2012) Flexural and Shear Strengthening of RC Beams with FRP –An Experimental Study. MTech by Research thesis.

Mahapatra, Supriya (2012) Analysis and Control of Mobile Robots in Various Environmental Conditions. MTech by Research thesis.

Biswal, Sweta Rani (2013) Fatigue Behaviour Analysis Of Differently Heat Treated Medium Carbon Steel. MTech by Research thesis.

Mishra, Sambhurisha (2013) Hydrodynamic Studies of Three-Phase Fluidized Bed by Experiment and CFD Analysis. MTech by Research thesis.

Das, Amar Kumar (2012) Effect of Processing Parameters on Properties of Alloyed Austempered Ductile Iron. MTech by Research thesis.

Hati, Kalyan Kumar (2013) An Approach for Object Tracking in Video Sequences. MTech by Research thesis.

Panigrahi, Archana Kumari (2013) Strengthening of Shear Deficient RC T-Beams with Externally Bonded FRP Sheets. MTech by Research thesis.

Pradhan, Kumar Prasannajit (2013) Modeling & Performance Enhancement Analysis of Some Nanoscale MOSFET Structures. MTech by Research thesis.

Panigrahy, Sarita (2013) Studies of short channel effects and
Performance enhancement of nano-mosfet Based on multi-objective genetic algorithm Approach. MTech by Research thesis.

Eliot, Elias (2013) Design, analysis and fabrication of an articulated mobile manipulator. MTech by Research thesis.

Patro, Brundaban (2014) Eulerian modeling of gas-solid multiphase flow in horizontal pipes. MTech by Research thesis.

Garnaik, Mohita Mohan (2014) Effects of highway geometric elements on accident modelling. MTech by Research thesis.

Kumar, Ravi (2014) Comparative analysis of hashing schemes for Iris identification using local features. MTech by Research thesis.

Sahu, Madhusmita (2014) A study on thermal characteristics of polymer composites
filled with micro sized tio2 particles. MTech by Research thesis.

Sahoo, Mrunmayee Manjari (2014) Analysis and modelling of surface water quality in river basins. MTech by Research thesis.

Verma, Vishal Kumar (2014) Microbial degradation of acetylsalicylic acid and ibuprofen. MTech by Research thesis.

Patra, Chinmayee (2014) Cfd simulations of fluidized bed Biomass gasification. MTech by Research thesis.

Sahu, Santosh Kumar (2014) Development of decision support systems towards supply chain performance appraisement. MTech by Research thesis.

Chatterjee, Suman (2014) A Study on Parametric Appraisal of Drilling on Bio-compatible Materials. MTech by Research thesis.

Das, Bibhuti Bhusan (2014) Characterization of ferrochrome slag as an embankment and pavement material. MTech by Research thesis.

Nakade, Priya G. (2014) Phase transfer catalyzed reaction for synthesis of sulfides and disulfides using hydrogen sulfide. MTech by Research thesis.

Patil, Sangram Shamrao (2014) Biodegradation Study of Phenol by Burkholderia sp. PS3 and Bacillus pumilus OS1 Isolated from Contaminated Soil. MTech by Research thesis.

Prakash, Shree (2014) Gesture-based Numeral Extraction and Recognition
Shree Prakash. MTech by Research thesis.

Pandey, Krishna Kant (2014) Design and analysis of Intelligent Navigational
controller for Mobile Robot. MTech by Research thesis.

Yadav, Rajiv Kumar (2014) An experimental and simulation study on parametric analysis in turning of inconel 718 and GFRP composite using coated and
uncoated tools. MTech by Research thesis.

Parwin, Rijwana (2014) Assessment of water resources & management strategies of Brahmani river basin. MTech by Research thesis.

Devismita, Dibya (2014) Numerical modelling of cell dehydration during cryopreservation. MTech by Research thesis.

Bakhsh, Anis (2013) Modeling and simulation of forced circulation evaporation crystallizer. MTech by Research thesis.

Sar, Debranjan (2014) Seismic evaluation of un-reinforced masonry structures. MTech by Research thesis.

Mahapatra, Amrit Anand (2014) Improved braking performance of an electric vehicle by integrating plug braking with regenerative braking. MTech by Research thesis.

Asdaque, P. M. G. Bashir (2014) Vibration analysis of non-uniform shaft-rotor system. MTech by Research thesis.

Mahapatro, Soumya Ranjan (2014) Control algorithms for a two tank liquid level system: An experimental study. MTech by Research thesis.

Ravindra, Vutukuru (2014) Design,Development and Testing of Nb-Ti Superconducting Magnet & Creation of Liquid Helium Test Facility. MTech by Research thesis.

Ravindra, Vutukuru (2014) Design, development and testing of nb-ti superconducting magnet & creation of liquid helium test facility. MTech by Research thesis.

Parhi, Sidharth Sankar (2014) Gainful utilization of spent pot lining – A hazardous waste from aluminum industry. MTech by Research thesis.

Pandey, Meenakshee (2013) Lipase catalysed hydrolysis of non-conventional oil resources: kinetics & optimization study. MTech by Research thesis.

S, Bala Murugan (2015) Finite element analysis of multi-disk rotor-bearing system with transverse crack. MTech by Research thesis.

Nath, Harjeet (2015) Studies on abatement of fluorides using fluidized bed reactor: aspen plus simulation. MTech by Research thesis.

Ghosh , Aritri (2014) Synthesis of Gold-Iron Oxide Composite Nanoparticles Using Tea Extract. MTech by Research thesis.

Mohanty, Ram Prasad (2014) Studies on the Impact of Cache Configuration on Multicore Processor. MTech by Research thesis.

Singh, Shalini (2014) Experimental investigation and modeling of hot machining operation using high-strength material. MTech by Research thesis.

Mohapatra, Soumya Ranjan (2015) Performance Enhancement of Active Power Filter using Robust Control Strategies. MTech by Research thesis.

Swain, Sudarshan (2015) Simulation and Experimental Realization of Adaptive
Controllers for Shunt Active Power Filter to improve
Power Quality. MTech by Research thesis.

Bharadwaj, A V S L Sai (2015) Preparation and Characterization of Activated Carbon from Tire and Biomass Char and its Applications in Liquid Phase Adsorption. MTech by Research thesis.

Badolia, Abhishek (2015) Study On the Development of the Alumina - Rare Earth Phosphate Machinable Composites for Biomedical Applications. MTech by Research thesis.

Sahu, Beeren (2015) Development of Local Feature Extraction and Reduction Schemes for Iris Biometrics. MTech by Research thesis.

Pandey, Pooja (2015) Impact of Climate Change on the Hydrology of Mahanadi River Basin. MTech by Research thesis.

Singh, Harshpreet (2015) Development of Cu-Based Metal Matrix Composites Using Silicon Carbide, E-Glass Fiber and Multiwalled Carbon Nanotubes as Reinforcement. MTech by Research thesis.

Bagal, Dilip Kumar (2015) Experimental Investigation and Optimization of Cutting Parameters in Plasma Arc Cutting. MTech by Research thesis.

Vaikunthbhai, K P (2014) Free Vibration and Buckling Behaviour of Laminated Composite Panel under Thermal and Mechanical Loading. MTech by Research thesis.

Kumar, Pawan (2015) Prediction of Fatigue Crack Growth in Part-through Cracked Pipes Using Exponential Model and Gamma Model. MTech by Research thesis.

Sahoo, Goutam Kumar (2015) A Framework for Remote Patient Monitoring to Diagnose the Cardiac Disorders. MTech by Research thesis.

Panda, Amitav (2014) Improved Vertical Handoff Schemes for K-Tier Heterogeneous Wireless Network. MTech by Research thesis.

Samal, Ali Padarbinda (2015) Characterization of Properties and Estimation of Power Generation Potentials of Residues of Some Woody Biomass Species. MTech by Research thesis.

Jefrin Jose , P (2014) Dynamics and Control of Flexible Composite Robotic Manipulators Based on Finite Element Method. MTech by Research thesis.

Tripathy, Satyabrata (2015) Characterization and Estimation of Power Generation Potentials Of Some Agricultural Wastes. MTech by Research thesis.

Suryendu, Chhavi (2015) Time-Delay Estimation Based Wireless-Networked Temperature Control System. MTech by Research thesis.

Mandal, Tarapada (2015) Microscopic Modelling Of Pedestrian Dynamics. MTech by Research thesis.

Mula, Raju (2015) Synthesis of Graphite/SiC Micro-composites and their influence on MgO-C Refractories. MTech by Research thesis.

Adhikari, Prativa (2015) Effect of Different Nano-oxide Addition on Densification, Microstructure, Electrical and Mechanical Properties of Ba(Zr0.2Ti0.8)O3–0.5(Ba0.7Ca0.3)TiO3 (BZT–BCT) Ferroelectric Ceramics. MTech by Research thesis.

Kumar, Ashwani (2015) Molecular Dynamics Simulation of Nano-indentation Studies on Zr-based Metallic Glass Matrix Composites. MTech by Research thesis.

Tirumalaraju, Deepthi (2011) Removal of Zinc, Nickel and Copper Ions from Waste Water Using Char-A Sponge Iron Plant Waste. MTech by Research thesis.

Debta, Birendra Kumar (2015) Dynamic Analysis, Voltage Control and Experiments on a Self Excited Induction Generator for Wind Power Application. MTech by Research thesis.

Jena, Subasini (2011) Studies on Batch Drying Characteristics and Transfer Coefficients of the Food Grains and Vegetables in A Fluidized Bed Dryer using Ann Method. MTech by Research thesis.

Pachari, Sreenivasulu (2015) Structure, Microstructure and Magneto-Dielectric Properties of Barium Titanate-Ferrite Based Composites. MTech by Research thesis.

Abhinay, Sreeram (2015) Effect of Dispersant and Binder on Fabrication of BZT-0.5BCT Piezoelectric Wafers by Tape Casting Technique. MTech by Research thesis.

Sangita, Sushree (2015) Hydraulic Conductivity and Leachate Characteristics of Lime Stabilized Flyash. MTech by Research thesis.

Raghava Ravi Teja, Peri (2015) Studies on Mechanical Properties of Brick Masonry. MTech by Research thesis.

Swain, Satyabrata (2014) Level 3 Feature Based Fingerprint Identification. MTech by Research thesis.

Shastri, Hrishikesh (2015) Correlation of Microstructure with Tensile, Creep and Corrosion Behaviour of Az91 Mg Alloy Fabricated by Three Different Casting Techniques. MTech by Research thesis.

Pilli, Venkatesh (2015) Study on the Alumina - Silicon Carbide - Carbon Based Trough Castable. MTech by Research thesis.

Mozumder, Yahya Hoque (2015) Influence of Intercritical Austenitizing Temperature, Quenching Media and Tempering Temperature on Mechanical Properties and Wear Behavior of Ductile Iron with Dual Matrix Structure. MTech by Research thesis.

Ghosh, Surya Prakash (2015) Synthesis & Characterizations of ZnO Thin Films and Nanostructures by Modified Aqueous Chemical Growth Method for Sensor Applications. MTech by Research thesis.

Pati, Anindita (2015) Viscosity, Flow Characteristics and Microstructural Characterization of Industrial Blast Furnace Slags. MTech by Research thesis.

Divya Bharathi, K (2015) Fatigue- Ratcheting Interaction Behavior of AISI 4340 Steel. MTech by Research thesis.

Nayak , Bighna Kalyan (2015) Study on Innovation in Product Design Considering Aesthetics and Ergonomics. MTech by Research thesis.

Sethi, Tanjot (2015) Design and Development of Instrumented Remote Centre Compliance. MTech by Research thesis.

Kumar, Ajit (2015) Study of Fatigue Crack-hole Interaction and Prediction of Crack Path. MTech by Research thesis.

Singh, Rupali (2016) Mullite Ceramic from Diphasic Precursor Powder. MTech by Research thesis.

Panda, Biranchi Narayan (2015) Design and Development of Cellular Structure for Additive Manufacturing. MTech by Research thesis.

Sowjanya , Chelluri (2015) Processing and Characterization of Porous Alumina Ceramics with Wide Porosity Range. MTech by Research thesis.

Soumya, Devavarapu (2015) Processing of Mullite based Ceramics Using Bauxite-Fly ash Mixture. MTech by Research thesis.

Abhinay, Seelamanthula V (2015) Fatigue Crack Growth Prediction of Band Overloaded 7075-T651 Aluminium Alloy by Exponential Model and Gamma Model. MTech by Research thesis.

Jacob, Arun (2015) Effect of Micro-blasting on Characteristics and Machining Performance of PVD AlTiN Coated Cutting Tools. MTech by Research thesis.

Ojha, Somanath (2015) Coal Handling System-Its Performance Monitoring & Suggestive Measures for Improvements. MTech by Research thesis.

Mondal, Soumini (2016) Mg-Al Layered Double Hydroxide Nano-Carrier for Controlled Release of anti-inflammatory Drug. MTech by Research thesis.

Panda, Ipsita (2015) Characterization of Red Mud as a Construction Material Using Bioremediation. MTech by Research thesis.

Swain, Kajal (2015) Stabilization of Soil Using Geopolymer and Biopolymer. MTech by Research thesis.

Priyadarshini, Sujata (2015) Static and Dynamic Analysis of Geogrid Reinforced Unpaved Road. MTech by Research thesis.

Das, Bamadev (2015) Fabrication of Chemical Vapor Deposition (CVD) Setup & Preparation of Copper Oxide (CuO) -CdX (X= Se, S) Nanoparticles Decorated Core-Shell Heterostructure. MTech by Research thesis.

Routray, Sharmili (2015) Shear Behaviour of BFRP Strengthened RC T-Beams. MTech by Research thesis.

Panigrahi, Ayaskanta (2015) Design and Analysis of Dual-Linearly Polarized Dielectric Resonator Antenna Array. MTech by Research thesis.

Jena, Jayadev (2012) Study of Rain Attenuation Calculation and Strategic Power Control for Ka-Band Satellite Communication in India. MTech by Research thesis.

Dash, Mimosha (2016) A Study on Thermal Characteristics of Epoxy Composites Filled with Natural Fiber and Particulate. MTech by Research thesis.

Sahoo, Sushree Sasmita (2016) Experimental and Numerical Investigation of Static and Dynamic Analysis of Delaminated Composite Plate. MTech by Research thesis.

Panigrahi, Kajal (2015) Experimental Study of Flow Through Rigid Vegetation in Open Channel. MTech by Research thesis.

Das, Pragyan Paramita (2015) Primary and Secondary Compression Behavior of Soft Clays. MTech by Research thesis.

Sambaraj, Sravan Kumar (2016) Development of Nano-oxide Dispersed Austenitic Stainless Steels by Mechanical Alloying Followed by Conventional Sintering and Spark Plasma Sintering. MTech by Research thesis.

Dash, Rupalika (2015) Modeling and CFD Simulation of Abrasive Flow Machining Process. MTech by Research thesis.

Ezhil Venuswaran , R R (2015) Development Of Porosity Gradient Bioglass Ceramic Scaffold. MTech by Research thesis.

Panda, Deepankar (2016) Development of Al-Fe3Al Composites by Powder Metallurgy Route. MTech by Research thesis.

Garnaik, Samresh (2015) On The Damping Analysis of Layered Beam Structures. MTech by Research thesis.

Tripathy , Subhrasmita (2016) Effect of Pre-strain and Pre-corrosion on Ratcheting Behavior of ASTM A668 Class D Steel. MTech by Research thesis.

Das, Geetanjali (2016) Processing, Characterization and Erosion Wear Behaviour of Coir Fiber Reinforced Epoxy Composites. MTech by Research thesis.

Badhai, Pranati (2016) Graphene Oxide-Magnetite Hybrid Nanoadsorbents For Toxin Removal in Aqueous System. MTech by Research thesis.

Srimagal, A (2016) Effects of Pre-treatments on Drying Characteristics of Bitter gourd. MTech by Research thesis.

Malik, Ramee (2016) Studies on Metallization of RP Parts for use in Preserving Artefacts. MTech by Research thesis.

Shaw, Gauri Shankar (2016) Preparation and Characterization of Gelatin-Tamarind Gum /Carboxymethyl Tamarind Gum Based Phase Separated Hydrogels and Films for Tissue Engineering Application. MTech by Research thesis.

Pattanaik, Samarendra (2016) Improvement in Service Life of Skip Car by Using Chromium Carbide Overlay Plate with Special Reference to Rourkela Steel Plant. MTech by Research thesis.

Banerjee, Sumit Kumar (2016) Experimental Study on Resistance in Gravel Bed Channels. MTech by Research thesis.

Mishra, Shreeparna (2016) Preparation and Characterization of Cassia-4 Hydroxy-Benzoic Acid Resin for Removal of Cr+6 From Contaminated Water. MTech by Research thesis.

Parida, Abinash (2016) Evaluation of Blasting Efficiency in Surface Mines. MTech by Research thesis.

Kandi, Rudranarayan (2016) Acoustic Horn Design, Numerical and Experimental Investigations of Ultrasonic Vibration Assisted Turning of Ti-6Al-4V. MTech by Research thesis.

Senapati, Madhusmita (2016) Design and Control of an Articulated Robotic Arm Using Visual Inspection for Replacement Activities. MTech by Research thesis.

Rout, Raja (2016) Design and Experimental Realization of Adaptive Control Schemes for an Autonomous Underwater Vehicle. MTech by Research thesis.

Mohan, Sanjay Krishna (2016) Densification and Characterization of Magnesium Aluminate Spinel from Commercial Grade Reactants: Effect of Milling and Additives. MTech by Research thesis.

Pradhan, Dhruti Sundar (2016) Impact of Surface Runoff from Opencast Coal Mines in the Ib Valley Basin and its Management. MTech by Research thesis.

Shama, Shaik (2017) Comparison of Mechanical Properties of Austenitic Ductile Cast Iron with Ferritic/Pearlitic Ductile Cast Iron. MTech by Research thesis.

Manoj, K N Sai (2016) Experimental Studies Towards Development of a Single Stage High Refrigerating Capacity G-M Type Pulse Tube Refrigerator. MTech by Research thesis.

Panda, Debashis (2016) Mathematical Modelling and Design Software for Pulse Tube Cryocoolers. MTech by Research thesis.

Pandey, Ankit Kumar (2016) Studies on Parametric Appraisal of Friction Stir Welding. MTech by Research thesis.

Barik, Sipra (2017) Production of Biodiesel from Food Waste. MTech by Research thesis.

Sarath Chandra, K (2017) Processing and Properties Of Polycrystalline Nd:YAG Ceramics. MTech by Research thesis.

Deepika, S (2017) Infrared and Microwave Assisted Hot Air Drying of Lemon (Citrus limon L.). MTech by Research thesis.

Agrawal, Shaleka (2017) A Numerical Study of Thin Liquid Film Flow over a Topographically Patterned Rotating Cylinder. MTech by Research thesis.

S., Sivapratha (2017) Development of a Multilayer Emulsion System for the Protection of Polyunsaturated Fatty Acids in Flaxseed Oil. MTech by Research thesis.

Samantaray, Saroj Kumar (2017) Experimental Determination and Prediction of Drag
Coefficient of Newtonian Fluids Flowing Over Solid
and Hollow Objects. MTech by Research thesis.

Supriya, Akankshya (2017) Studies on Pre-treated Coir Dust Reinforced Polymer Composites. MTech by Research thesis.

Sahu, Priyanka (2017) Study on Electrical and Magnetic Properties of Modified Strontium Hexaferrite (SrFe12O19). MTech by Research thesis.

Satapathy, Mitra (2017) Development of Durable Superhydrophobic Polymer Composite Coatings for Self-Cleaning and Oil-Water Separation Applications. MTech by Research thesis.

Kumari, Saroj (2017) Hydrogen Sulfide Capture and Utilization: Multiphase Catalysis in Synthesis of Symmetrical Aromatic Sulfides. MTech by Research thesis.

Ghodki, Devendra M (2017) Kinematic, Dynamic and Gait Analysis for Navigation of NAO Humanoid Robot in a Cluttered Environment. MTech by Research thesis.

Dhir, Prateek Kumar (2017) Seismic Performance Assessment of RC Multi-Storeyed Gravity Load Designed Frames. MTech by Research thesis.

Biswal, Manas Ranjan (2017) Some Studies on RF Measurement and Modeling for Assessment of Radiation Hazard. MTech by Research thesis.

Ritanjali, Sushree Ritu (2018) Synthesis and Characterization of Anisotropic Nanostructures of Noble Metals (Au, Ag) for Enhanced Optical and Catalytic Applications. MTech by Research thesis.

Bhuyan, Pranjal (2018) Effect of Operating Conditions, Lobe-number, Clearance Size and Rotor Profile on the Transient Hydrodynamics, Heat Interaction, and Performance of a Root Blower. MTech by Research thesis.

Perumalla, Ram Mohan (2018) Application of Fuzzy Logic for Prediction of Roof Fall Area in the Goaf in Coal Mines. MTech by Research thesis.

Sikder, Sayantani (2018) Abatement of Chromium (VI) and Mobilization of Selected Pollutants Including Cr(VI) in Aquatic Food Chain. MTech by Research thesis.

Satapathy, Monalisha (2018) Simultaneous Estimation of Speed–Dependent Dynamic Parameters and Residual Unbalances in Rotor–Bearing–Coupling Systems. MTech by Research thesis.

Hossain, Md. Mosarraf (2018) Investigation on Electromagnetic Welding (EMW)for Tubular Jobs using FEA. MTech by Research thesis.

Das, Prithika (2018) Development and Characterization of Composites filled with Coal Mine Overburden Material and other Industrial Wastes. MTech by Research thesis.

Baruah, Biswajit (2018) Sintering and mechanical properties of Zr-doped Al2O3. MTech by Research thesis.

Saxena, Rishabh (2016) Effect Of Oxide Dispersion On Microstructure, Mechanical, And High Temperature Behaviour Of Tungsten Based Alloys. MTech by Research thesis.

Shukla, Neha (2017) Utilization of moringa oleifera for reuse of treated domestic wastewater. MTech by Research thesis.

Patro, S Aloka (2019) IoT Based System for Compressed Air Consumption Monitoring. MTech by Research thesis.

Mallick, Pratishruti (2019) Gas Permeability of Coal at In-Situ Conditions. MTech by Research thesis.

Dey, Diptiman (2019) Design and Real-time Implementation of Adaptive Grid Synchronization Control Schemes for Photovoltaic System. MTech by Research thesis.

Mishra, Soumya Nandan (2020) Study of Routing Protocols for Low Power Internet of Things (IoT) Devices. MTech by Research thesis.

Panda, Bandana (2020) Studies on Magnetic, Electric and Dielectric Properties of Ferrite Modified LCMO Nanocomposite Systems. MTech by Research thesis.

Majhi, Snehashis (2021) Weakly-supervised Anomaly Detection and Classification in Untrimmed Surveillance Videos. MTech by Research thesis.

Uttarkabat, Satarupa (2020) Outlier Detection using Unsupervised Learning Techniques. MTech by Research thesis.

Sahoo, Asit (2021) Designing Lightweight Authentication Schemes for IoT Applications. MTech by Research thesis.

Anchal, . (2022) Detection and Mitigation of DDoS Attack in Software Defined Networks (SDN) using Statistical Approach. MTech by Research thesis.