Number of items: 188.
Thesis
Raghavendra, Gujjala (2015) Mechanical and Tribological Behavior of Nanofiller Reinforced Polymer Nanocomposite. PhD thesis.
., Gagandeep (2015) Dynamics of Bubble and Drop in Multiphase Flow through Numerical Simulation. MTech thesis.
Abhinav, K (2015) Recharging of a Rectangular Microchannel over a Span to Increase Heat Transfer. BTech thesis.
Addala, Sandeep (2015) Design and Modeling of Vacuum Pumping Systems for Laboratory Scale Applications. MTech thesis.
Agnihotri, Vaibhav Kumar (2015) Electrical Discharge Machining of Cu-Al2O3 Metal Matrix Composites. MTech thesis.
Agrawal, Alok (2015) Thermal and Dielectric Behaviour of Polymer Composites with Hybrid Fillers. PhD thesis.
Ahirwar, Pankaj (2015) Experimental Investigation on Autogenous Tungsten Inert Gas (TIG) Welding of AISI 1020 Mild Steel. MTech thesis.
Alli, Sheak Aftab (2015) Design, Fabrication and Analysis of a Hexapod. MTech thesis.
Amrit, Geet (2015) Design and Fabrication of an Unmanned Aerial Vehicle. MTech thesis.
Ankit, Patnala and Patra, Manas Ranjan (2015) Designing and Fabrication of Automatic Cutting Machine. BTech thesis.
Azad, Prashant Kumar (2015) Study of Blast Furnace Stave Cooler Based on Heat Transfer Analysis. MTech thesis.
Azaruddin, Mohammad (2015) Numerical Simulation of Heat Transfer in Microchannel with Twisted Tape Insert. MTech thesis.
Bagal, Dilip Kumar (2015) Experimental Investigation and Optimization of Cutting Parameters in Plasma Arc Cutting. MTech by Research thesis.
Bankar, Suraj Sitaram (2015) Vibration and Acoustic Analysis of Laminated Composite Plate. MTech thesis.
Behera, Abyarth Kumar (2015) Wall Climbing Robot for Inspection of Wall Using Digital Image Processing. MTech thesis.
Behera, Akhilesh (2015) CFD Analysis of Matrix Cooling Method in Gas Turbine Blades. BTech thesis.
Behera, Alok Narayan (2015) Heat Transfer in Pulsatile Flow Through Square Microchannels With Wavy Walls. MTech thesis.
Benarji, Koyilada (2015) Effect of Tool Coating and Cutting Environment on Machinability Characterstics of Nimonic C-263. MTech thesis.
Bhagat, Pramod Kumar (2015) Optimization of Refractory Lining Used In Blast Furnace. MTech thesis.
Bhanariya, Sumit (2015) Assessment of Effective Thermal Conductivity of Epoxy-TiO2 Composites. MTech thesis.
Bhanjdeo, Pratik Ranjan (2015) Neural Networks Technique for the Control of Artificial Mobile Agents. BTech thesis.
Biswal, Hitesh Kumar (2015) Numerical Study of Heat Transfer Characteristics of a Channel with Triangular Wall. BTech thesis.
Biswal , Rasmikanti (2015) Conjugate Heat Transfer Analysis in Cryogenic Microchannel Heat Exchanger. MTech thesis.
Chakravarty, Maussam (2015) A Theoretical Decision Making Framework on the Assessment of Leagility Index in a Supply Chain Management. BTech thesis.
Chandra, Kshitij (2015) Study on Effective Thermal Conductivity of Epoxy- Al2O3 Composites. MTech thesis.
Chandrakar, Ashish and Agrawal, Ankit (2015) Study on Fatigue Crack Growth in the Presence of a Hole in the Vicinity of the Crack Path. BTech thesis.
Chauhan, Laxman (2015) Experimental Study of Solidification at Extreme Low Temperature in a Cylindrical Container. MTech thesis.
Choudhury, Malay Milan (2015) Use of Multi-Criteria Decision Making in Establishment of Solar Power Plant in NIT Rourkela. BTech thesis.
Dahal, Pranesh (2015) Design of Object Identification System Based on Machine Vision. BTech thesis.
Damu, Sapkale Vinod (2015) Numerical Investigation of Heat Transfer Enhancement in Corrugated/Wavy Channel. MTech thesis.
Das, Ananta Kumar (2015) Phase‐Split in Two‐Phase Flow through T‐Junction. MTech thesis.
Das, Jayadev (2015) Design and Development of a Powder Feeding system For Tungsten Inert Gas (TIG) Cladding. BTech thesis.
Das, Siddharth (2015) Multi-Objective Optimization in Machining (Turning) of Copper. BTech thesis.
Das, Soumyajit (2015) CFD Modeling and Optimization of Magneto-rheological Abrasive Flow Finishing (MRAFF) Process. MTech thesis.
Dash, Abhishek and Mohapatra, Anshuman (2015) Atmospheric Water Generator: To Meet the Drinking Water Requirements of a Household in Coastal Regions of India. BTech thesis.
Dash, Pradosh Pritam (2015) Design of Piezoresistive MEMS Accelerometer with Optimized Device Dimension. BTech thesis.
Dash, Rupalika (2015) Modeling and CFD Simulation of Abrasive Flow Machining Process. MTech by Research thesis.
Dawani, Himalaya (2015) Analysis of Spherical Texture On Characteristics of Hydrodynamic Journal Beraing. MTech thesis.
Deepak, B B V L (2015) Design and Development of an Automated Mobile Manipulator for Industrial Applications. PhD thesis.
Dwivedi, Shailesh Kumar (2015) Application of Nanofluid Lubrication During Machining of Aeroengine Grade Stainless Steel. MTech thesis.
Farooqui, Mohammed Rayed (2015) Numerical Study on Effect of Rectangular Shaped Ribs Arranged in Different Patterns on Thermal Performance of a Solar Air Heater Duct. MTech thesis.
Garg, Gaurav Kumar (2015) Investigation into Mechanical and Tribological Behaviour of Hollow Glass Microsphere (HGM) Reinforced Epoxy Composite. MTech thesis.
Garnaik, Samresh (2015) On The Damping Analysis of Layered Beam Structures. MTech by Research thesis.
Geoffrey, Omosa B Michael (2015) Decision Support System for Managing Reverse Supply Chain. MTech thesis.
Gochhayat , Soumya Ranjna (2015) Tungsten Inert Gas (TIG) Assisted TiC-NiCoating on AISI 304 Stainless Steel. BTech thesis.
Gupta, Amit (2015) Conjugate Heat Transfer in a Converging Microchannel. BTech thesis.
Gupta, Gaurav (2015) A Study on Using Glass Micro-Spheres in Erosion Resistant Coatings and Polymer Composites. PhD thesis.
Gurjar, Ashish Kumar (2015) Design and Analysis of Nano Vibratory Beam Gyroscope. MTech thesis.
Hansdah, Dulari (2015) Experimental Studies on Partial Substitution of Diesel With Bioethanol (Derived From Madhuca Indica Flowers) Using Different Techniques. PhD thesis.
Hati, Dinesh Prasad (2015) Comparative Study of Conventional And Minimum Quantity Lubrication During Machining 17-4PH Stainless Steel. BTech thesis.
Hota, Sachidananda (2015) Study, Design and Fabrication of a 3D Printer. BTech thesis.
Inala, Ramu (2015) On the Dynamic Stability of Functionally Graded Material Plates Under Parametric Excitation. PhD thesis.
Irshad , K T (2015) Anvil Design and Experimental Investigation for Ultrasonic Welding of Thin Dissimilar Metals. MTech thesis.
Jacob, Arun (2015) Effect of Micro-blasting on Characteristics and Machining Performance of PVD AlTiN Coated Cutting Tools. MTech by Research thesis.
Jagat, Keshab (2015) Numerical Simulation of Jet Impingement Cooling on a Pin-Fin. MTech thesis.
Jaipuria, Sanjita (2015) The Effect of Uncertainties on Multi-Echelon Serial Supply Chains. PhD thesis.
Janghel, Mithilesh Kumar (2015) An Experimental Study of Hydraulic Jump Due to Moving Jet Impingement. MTech thesis.
Jena, Swarup Raj (2015) Design and Fabrication of Automatic Floor Cleaner. BTech thesis.
Jha, Chandan Kumar (2015) Effective Thermal Conductivity of h-BN Filled Epoxy Composites. BTech thesis.
Jishnu, M (2015) Entrainment Phenomenon in Stratified Liquid Layers by Imposing Rotary Motion. MTech thesis.
Juvvala, Rambabu (2015) Economic Design of X-bar Control Chart Using Gravitational Search Algorithm. MTech thesis.
Kar, Vishesh Ranjan (2015) Nonlinear Thermoelastic Static Vibration and Buckling Behaviour of Functionally Graded Shell Panel. PhD thesis.
Kawar, Bijay Kumar (2015) Development of Software for Different Textured Profile Thrust Bearing. BTech thesis.
Khan, Irshad Ahmad (2015) Study of Computational and Experimental Methodologies for Cracks Recognition of Vibrating Systems using Modal Parameters. PhD thesis.
Khatua, Bapuji (2015) Numerical Analysis of Orifice-Type Aerostatic Thrust Bearing. BTech thesis.
Kishor, Kaushal (2015) Design and Fabrication of Intake and Exhaust Manifold of a Prototype Race Car. BTech thesis.
Koli, Aakash (2015) Study on Thermal and Acoustic Characteristics of Bagasse Fibre Reinforced Epoxy Composites. MTech thesis.
Kujur, Rocky Vinay (2015) Vibration Analysis of Flexible Composite Manipulator. MTech thesis.
Kumar, Abhishek (2015) Experimental Investigations on Machining of CFRP Composites: Study of Parametric Influence and Machining Performance Optimization. PhD thesis.
Kumar, Bathina siva (2015) Comparative Study among Different Cryoprobe Configuration for Effective Necrosis of Biological Tissue. MTech thesis.
Kumar, Manoj (2015) Experimental Analysis of Solidification and Remelting of Brine Solution Over a Cryocooled Sphere. MTech thesis.
Kumar, Mukesh (2015) Investigation of Magnetic Force in Metallic Structure of Superconducting Magnet. MTech thesis.
Kumar, Navin (2015) Design Development and Analysis of Humanoid Robot. MTech thesis.
Kumar, Raj Babbar (2015) Underwater Control of Mobile Robot. BTech thesis.
Kumar, Sandeep (2015) CFD Analysis of Film Cooling in Gas Tusrbine Blade. BTech thesis.
Kumar, Shashibhusan (2015) Study on Thermal Conductivity of Epoxy Filled With Mullite Particles. BTech thesis.
Kumar , Nitish (2015) Vibration Analysis of Functionally Graded Carbon Nanotube Reinforced Beam Structures. BTech thesis.
Kumari, Shilpi (2015) Study of TiC Coating on different type Steel by Electro Discharge Coating. MTech thesis.
Kundu, Shubhasri (2015) Navigational Strategies for Control of Underwater Robot using AI based Algorithms. PhD thesis.
Luha , Shyam Sundar (2015) Study of Effect of Advanced PVD coating on Drilling of Nickel-Based Super Alloy Inconel 825. MTech thesis.
M, Vishnu (2015) Numerical Simulation of Helical Coil Tube in Tube Heat Exchanger with Baffles. MTech thesis.
Mahanand, Tribed Kumar (2015) Differential Evolution Optimization Technique to Design Gear Train System. BTech thesis.
Mahananda, Ranjan (2015) Optimization of Machining Performance Yields during Turning of GFRP Composites: A Grey based Taguchi Approach. BTech thesis.
Mandal, Abhijeet (2015) Gravitational Search Algorithm: A Novel Optimization for Economic Design in Discontinuous Model. BTech thesis.
Manna, Vivek (2015) Numerical Simulation of Air-Lift Pump. BTech thesis.
Matawale, Chhabi Ram (2015) Evaluation of Leanness, Agility and Leagility Extent in Industrial Supply Chain. PhD thesis.
Meher, Bijaya Kumar (2015) CFD Analysis of a Pulse Tube Cryocooler. BTech thesis.
Mishra, Ashutosh (2015) Analysis and Optimization of Process Parameters of Heat Exchangers and Turbines for Helium Refrigerator/Liquefier. MTech thesis.
Mishra, Manu (2015) Design and Fabrication of Underwater Robot. MTech thesis.
Mishra, Purushottam (2015) Multi-Objective Optimization in Electro Discharge Machining of Al/B4c Metal Matrix Composites. MTech thesis.
Mishra, Swadheen Satyakam (2015) Study of Motion Control of A Flexible Link. BTech thesis.
Mishra , Samarth (2015) Dynamic Stress Analysis of Viscoelastic Rotor. MTech thesis.
Mobin, Shaikh Tariq (2015) Design and Development of Solar Panel Cleaning System. MTech thesis.
Mohanty, Chinmaya Prasad (2015) Studies on Some Aspects of Multi-objective Optimization: A Case Study of Electrical Discharge Machining Process. PhD thesis.
Mohanty, Prases Kumar (2015) Analysis and Development of Computational Intelligence based Navigational Controllers for Multiple Mobile Robots. PhD thesis.
Mohanty, Sabyasachi (2015) Effect of Obstacle-Size on the Flow Structure of Two-Phase Flow Through Enlarging Channel. BTech thesis.
Mohapatra, Dhiren (2015) Design and Analysis of Aerostatic Bearings of Cryogenic Turbines for Helium Refrigerator/Liquefier. MTech thesis.
Mohapatra, Jeet (2015) Non Fourier Heat Transfer Across a Gun Barrel. BTech thesis.
Mudgala , Sandeep (2015) Numerical Analysis of Plate Fin Heat Exchanger at Cryogenic Conditions. MTech thesis.
Mukhopadhyay, Akash (2015) Experimental Investigations and Optimization of the Machinability Aspects of AISI 4340 Alloy Steel Using Uncoated Carbide and Coated Cermet Inserts in Dry Hard Turning. MTech thesis.
Nageendrababu, Kona (2015) Development of Arrayed Structures Using Reverse EDM (R-EDM). MTech thesis.
Nahak, Nibedit (2015) Design of Fish Descaling Machine. BTech thesis.
Nanda, Abhishek (2015) Finite Element Modelling and Analysis of Carbon Nanotobe Based Nano Composite Structures. BTech thesis.
Nayak, Anshul Abhijit (2015) Modelling, Simulation and Experimental Investigation for Generating ‘I’ Shaped Contour Using Electro Chemical Machining. BTech thesis.
Nayak, Bijaya Bijeta (2015) Parametric Optimization of Taper Cutting Process using Wire Electrical Discharge Machining (WEDM). PhD thesis.
Nayak, Debasish (2015) Study, Design and Fabrication of a 3D Printer. BTech thesis.
Nayak, Prajapati (2015) Investigation in to Mechanical and Tribological Behaviour of Orange Peel Reinforced Epoxy Composite. MTech thesis.
Nayak, Sarthak Arooni (2015) Study, Design and Fabrication of a 3D Printer. BTech thesis.
Nayak, Shreemoy Kumar (2015) Design of Kinetic Energy Recovery System for Bicycle. BTech thesis.
Nayak, Swadesh Kumar (2015) CFD Analysis of Flow Pattern in Electrochemical Machining Process. BTech thesis.
Nayak, Swaraj Sourav (2015) Thermal Conductivity of Epoxy Composites Filled With Aluminium Nitride (AIN). BTech thesis.
Noor, SK Noor Mohammad (2015) Erosive Wear Behaviour of Orange Peel Char Reinforced Epoxy Composites. BTech thesis.
Ojha, Shakuntala (2015) Investigation in to Mechanical and Tribological Behavior of Biomass Based Carbon Black Filled Epoxy Composite. PhD thesis.
Padhan, Manas Kumar (2015) Fabrication, Balancing and Analysis of Two Wheeled Robot. MTech thesis.
Pal , Ansuman Dutta (2015) Modelling of Abrasive Flow Machining. BTech thesis.
Panda, Deepak (2015) Computational Fluid Dynamics of Airfoil Sections. BTech thesis.
Panda, Manas Ranjan (2015) A Numerical and Experimental Approach to Study the Parametric Effect of Ultrasonic Welding. MTech thesis.
Panda, Samarendra (2015) Numerical Analysis of Double Inlet Pulse Tube Refrigerator. MTech thesis.
Pandey, Prashant (2015) Multi-Objective Optimization in Electro Discharge Machining of Al/Al2O3 Metal Matrix Composite. MTech thesis.
Panigrahy, Umesh (2015) Uncertain Vibration Analysis of Laminated Structure-A Fuzzy Finite Element Approach. BTech thesis.
Parida, Pravas Janmejay (2015) Design of Mechanical Device to Transfer a Seriously Ill Person to the Operation Theater. BTech thesis.
Parida, Ram Prasad (2015) FEM Modeling of Single Walled Carbon Nanotube. BTech thesis.
Parijat, Kumar (2015) Multi-Objective Optimization in Machining (Turning) of Aluminium. BTech thesis.
Paswan, Ajay Kumar (2015) Free Vibration and Bending Analysis of Uniformly Distributed Carbon Nanotube Composite Plate Using Finite Element Method. MTech thesis.
Patel, Mrityunjay Prasad (2015) Vibration Analysis of Functionally Graded Nanocomposite Conical Shell Structures. MTech thesis.
Pati, Pravat Ranjan (2015) A Study on Utilization of LD Slag in Erosion Resistant Coatings and Polymer Composites. PhD thesis.
Pati, Swarupa Ranjan (2015) Three-Body Abrasive Wear Behaviour of Jute-Glass Reinforced Epoxy Composite. BTech thesis.
Patil, Dinesh (2015) Thermo-Mechanical Stress Analysis of Functionally Graded Tapered Shaft System. MTech thesis.
Patnaik, Yugesh (2015) CFD Analysis of RIB Turbulated Cooling in Gas Turbine Blades. BTech thesis.
Patra, Prabir Kumar (2015) Finite Element Simulation of Machining of Inconel 825, a Nickel Based Superalloy. BTech thesis.
Patra, Pravajyoti (2015) Aerodynamic Analysis of Pivotless Tilting Pad Gas Journal Bearing. MTech thesis.
Patro, Jatin Kumar (2015) Numerical Simulation of Inertial Entrainment Phenomenon. BTech thesis.
Pradhan, Preetiranjan (2015) Finite Element Analysis of Gas Foil Bearings. BTech thesis.
Pradhan, Rama Prasanna (2015) Friction and Wear Behaviour of Cenosphere Dispersed Aluminium Matrix Composite Fabricated by Powder Metallurgy Route. MTech thesis.
Pradhan, Ranbir Pratik and Shivadas, Patil Gagan (2015) Design and Development of Automated Filler Rod Feeding System for TIG Welding. BTech thesis.
Pradhani, Amit Kumar (2015) Design, Fabrication & Testing of Alignment Test Set Up. BTech thesis.
Praharaj, Rajendra Kumar (2015) Design and Development of Liquid Nitrogen Storage Vessel Using ASME Boiler and Pressure Vessel Code. MTech thesis.
Prakash, Chandra (2015) Effective Thermal Conductivity of Yttria Stabilised Zirconia Filled Epoxy Composites. BTech thesis.
Praveen, K (2015) Modal Reduction of Viscoelastic Beam Cosidering Higher Order System. MTech thesis.
Rajesh Kumar, V (2015) Conjugate Heat Transfer in Diverging Microchannels. BTech thesis.
Rajpuriya, Vishnu (2015) Analysis of Solidification and Remelting of Water Over a Cryocooled Sphere Through Natural Convection. MTech thesis.
Ranjan, Vivek Kumar (2015) Design, Fabrication & Testing of Shaft Alignment Test Set Up. BTech thesis.
Ranjit Kumar, A (2015) Finite Element Analysis of a Rotor Supported with Hydrodynamic Journal Bearings. BTech thesis.
Rout, Sachindra Kumar (2015) Design and Analysis of Pulse Tube Refrigerator. PhD thesis.
S, Bala Murugan (2015) Finite element analysis of multi-disk rotor-bearing system with transverse crack. MTech by Research thesis.
Sahoo, Ajitesh (2015) Study on Ultrasonic Welding of Aluminimum Sheets. BTech thesis.
Sahoo, Biswajit (2015) Vibration Analysis of Cantilever Beam With Two Inclined Cracks and Its Implementation in Fault Diagnosis. MTech thesis.
Sahoo, Chiranjibi (2015) Development of a 6 DOF Parallel Serial Hybrid Manipulator. MTech thesis.
Sahoo, Deepak Kumar (2015) Fabrication of Functionally Graded Material (FGM) Set-Up. BTech thesis.
Sahoo, Mitravanu (2015) Experimental and Numerical Studies on Plate Fin Heat Exchanger. MTech thesis.
Sahoo, Satyaprakash (2015) Analytical Simulation and Experimental Investigation of Various Characteristics of Hole Quality During Micro Drilling of PCB. BTech thesis.
Sahu, Anoop Kumar (2015) Supply Chain Performance Appraisement and Benchmarking for Manufacturing Industries: Emphasis on Traditional, Green, Flexible and Resilient Supply Chain along with Supplier Selection. PhD thesis.
Sahu, Binaya Kumar (2015) Experimental Investigation of Turning of Austenitic Steel. BTech thesis.
Sahu, Hulash Ram (2015) Design of Auxiliary Passive Magnetic Bearing for Cryogenic Turboexpander. MTech thesis.
Sahu, Pankaj (2015) Experimental Investigation and Optimization of Parameters in Electrochemical Machining Operation. MTech thesis.
Sahu, Sudhanshu Shekhar (2015) Axial Back Conduction in Cryogenic Fluid Microtube. MTech thesis.
Sahu , Sharwan Kumar (2015) Drilling of Glass Fiber Reinforced Polymer (GFRP) Composites: Multi Response Optimization Using Grey Relation Analysis with Taguchi’s Method. MTech thesis.
Saikia, Nihar (2015) Static and Free Vibration Analysis of a Sandwich Beam with Partial Constraining Layer with MR Fluid Core. MTech thesis.
Samal, Ali Padarbinda (2015) Characterization of Properties and Estimation of Power Generation Potentials of Residues of Some Woody Biomass Species. MTech by Research thesis.
Samal, Sangram Kumar (2015) Numerical Study of Taylor Bubble Breakup by Placing Obstacle at T-Junction Bifurcation. MTech thesis.
Samantaray, Sambeet (2015) Experimental Analysis on Surface Roughness of En-24 Hardened Steel. BTech thesis.
Samantra, Chitrasen (2015) Studies on Risk and Occupational Health Hazards in Industrial Context: Some Case Research. PhD thesis.
Satapathy, Sourav Bikash (2015) Development of an Experimental Set-Up for Producing Metal and Ceramic Functionally Graded Materials. BTech thesis.
Satheesh, Adireddi (2015) Navigation of Real Mobile Robot by Using Fuzzy Logic Technique. MTech thesis.
Sen, Deeprodyuti (2015) Analytical and Experimental Determination of Mechanical Properties of Irradiated Materials. MTech thesis.
Senapati, Rajaranjan (2015) Automation and Controlling of Automatic Floor Cleaner. BTech thesis.
Sethi, Himansu Sekhar (2015) Finite Element Modeling and Analysis of Nanocomposite Airfoil Structures. MTech thesis.
Shamim, Kausar (2015) Erosive Wear Behavior of Pomegranate Peel Reinforced Epoxy Composite. BTech thesis.
Singh, Ashish (2015) Design, Analysis and Fabrication of a Reconfigurable Stair Climbing Robot. MTech thesis.
Singh, Ravi Pratap (2015) Vibration and Bending Behavior of Laminated Composite Plate with Uncertain Material Properties Using Fuzzy Finite Element Method. MTech thesis.
Singh , Abhishek (2015) Drilling of Glass Fiber Reinforced Polymer (GFRP) Composites: Parametric Appraisal and Multi Response Optimization. MTech thesis.
Soni, Lalit (2015) TiC Coating on AISI 304 Stainless Steel by Tungsten Inert Gas (TIG) Cladding Using Preplaced Powder. MTech thesis.
Soni, Vijay Kumar (2015) Experimental Studies on Thermal Behavior of 6T Cryogen-Free Superconducting Magnet System. MTech thesis.
Subhash, Sane (2015) Studies on Trajectory Tracking of Two Link Planar Manipulator. MTech thesis.
Sudheepth, K (2015) Optimization of Machining Performance during the Turning of GFRP Composites:Topsis Based Taguchi Method. BTech thesis.
Sukhdeve, Chandrakant S (2015) Experimental Set Up for Vacuum Laboratory. MTech thesis.
Suman, Navneet Kumar (2015) Liquefaction of Helium and Nitrogen with GM Cryocooler. MTech thesis.
Swain, Prasant Kumar (2015) Effect of Displacement Increment on Fracture Toughness (JIc) of HSLA Steel. MTech thesis.
Teli, Satish Balaso (2015) Modeling and Analysis of Bimorph Piezoelectromagnetic Energy Harvester. MTech thesis.
Thejavath, Mangilal (2015) CFD Analysis and Optimization of Process Parameters of Abrasiveflow Machining. MTech thesis.
Tripathy, Gyanendra (2015) Multi-Objective Optimization in Machining (Turning) Of Brass. BTech thesis.
Tripathy, Satyabrata (2015) Characterization and Estimation of Power Generation Potentials Of Some Agricultural Wastes. MTech by Research thesis.
Vanapalli, Viswa Teja (2015) Modelling & Dynamic Analysis of Wind Turbine Blades. MTech thesis.
Vyankatrao, Deshmukh Akshay (2015) Buckling and Free Vibration Analysis of Sandwich Beam With MR Core. MTech thesis.
Wadile, Prasad P (2015) Numerical Study of Laminar Natural Convection in an Enclosure with Conjugate Heat Transfer. MTech thesis.
Wamankar, Arun Kumar (2015) Experimental Studies on Analysis,Performance,Emissions and Combustion Characteristics of Carbon blends as Fuel in a CI Engine. PhD thesis.
Yadav, Shivam (2015) Study of Shear Stress on the Surface of an Obstacle Attached to Wall of a Narrow Channel. BTech thesis.
Yuva Raju, Bonda Atchuta Ganesh (2015) Experimental Investigation and Numerical Analysis of Combined Extrusion-Forging Process. MTech thesis.
This list was generated on Fri Apr 26 12:32:07 2024 IST.
