Items where Subject is "Engineering and Technology > Mechanical Engineering > Machine Design"
Group by: Creators | Item Type
Jump to: Thesis
Number of items at this level: 243.
Baliarsingh, Avaya Kumar (2013) Prediction of fatigue crack propagation life in single edge notched beams using exponential model. MTech thesis.
Bhardwaj, Gautam (2013) Measurment of electrical conductivity of natural fiber composite. BTech thesis.
Das, Suraj Kumar (2013) Study of Flexural Behaviour of Jeffcott Rotor. BTech thesis.
Gayen , Debabrata (2013) Finite element based vibration and stability analysis of functionally graded rotating shaft system under thermal environment. MTech thesis.
Mishra, Pradeep Kumar (2013) Nonlinear static analysis of magnetostrictive laminated composite plate. MTech thesis.
Porwal , Himanshu (2013) Piezoelectric Transduction Mechanism For Vibration Based Energy Harvesting. MTech thesis.
Singh , Ajeet Bahadur (2013) Mechanical and solid particle erosion behavior of modified rice-husk filled epoxy composite. MTech thesis.
Sonkar , Rakesh Kumar (2013) Navigation of Automatic Vehicle using AI Techniques. MTech thesis.
., Hemanshu (2013) Vibration Analysis of Composite Beam. MTech thesis.
., Om Prakash (2014) Elastic plastic fracture behavior and effect of band- overload on fatigue crack growth rate of an HSLA steel. MTech thesis.
A, J S N B Vamsee (2011) Dynamicanalysis of electrostatically exited micro cantilever beam. MTech thesis.
Acharya, Biswajit (2017) Energy Harvesting From a Non-Prisimatic Cantilever Beam. MTech thesis.
Agarwalla, Deepak Kumar (2013) Diagnosis of Damages in Beam Structures using Vibration Parameters and Artificial Intelligence Techniques. MTech thesis.
Ahmad, D (2014) Vibration analysis and control of rotating composite shaft system using active magnetic bearings. MTech thesis.
Ankit, Patnala and Patra, Manas Ranjan (2015) Designing and Fabrication of Automatic Cutting Machine. BTech thesis.
Ashok, Divekar Aniket (2014) Design and analysis of kinematically redundant planar parallel manipulator for isotropic stiffness condition. MTech thesis.
B., Chetankumar (2018) Performance Study of an Automotive Fresh Air Subwoofer. MTech thesis.
Baad, S (2014) Vibration analysis and damping characteristics of hybrid composite plate using finite element analysis. MTech thesis.
Bankar, Suraj Sitaram (2015) Vibration and Acoustic Analysis of Laminated Composite Plate. MTech thesis.
Barik, Sanjog and Singh, Brijesh Kumar (2012) Experimental Investigation of Tribological Properties of Cu/Al2O3/TiO2 composites. BTech thesis.
Baruah, Madhurya and Rakshin, H A (2010) Design and Fabrication of a Gear Box Motor Current Analysis System. BTech thesis.
Basumatary , Kamal Kumar (2013) Investigation into Mechanical and Tribological Properties of Ipomoea carnea Reinforced Epoxy Composite. MTech thesis.
Behera, Deepak (2012) Design and Analysis of Underactuated compliant mechanisms. BTech thesis.
Behera, Deepak Kumar (2017) Investigation in to Mechanical and Tribological Behavior of Pistachio Shell Powder (Pistacia Vera) Reinforced Epoxy Composite. MTech thesis.
Behera, P S (2010) Vibration Analysis of a Beam using Neural Network Technique. BTech thesis.
Behera, Ranjit (2016) CFD Analysis of Aerostatic Bearing for Cryogenic Turbo-Expander. MTech thesis.
Behera, Suraj Kumar (2017) Tribology and Rotordynamics of Small High-Speed Cryogenic Turboexpander. PhD thesis.
Bera, Tanusree (2019) Development and Characterisation of Metal Matrix Composite Using Cenosphere for Wear Resistant Applications. PhD thesis.
Bharule, Ajay (2009) Computer Aided Design and Analysis of Swing Jaw Plate of Jaw Crusher. MTech thesis.
Bhuyan, Sandip Kumar (2009) Micro-Drilling using Nd-YAG Laser. BTech thesis.
Biswal, Rabishankar (2010) Study of Wear Behaviour of Rice Husk Ceramic Composites. BTech thesis.
Biswal, Somen (2016) Processing and Characterization of Epoxy Composites Reinforced with Short Palmyra Fibers. MTech thesis.
Bondada , Vinay (2018) Effect of Magnetic Field on MRR and surface Roughness in Electrochemical Machining. MTech thesis.
Chanap, Rahul (2012) Study of Mechanical and Flexural properties of coconut shell ash reinforced epoxy composites. BTech thesis.
Chandole, Pranayajoshi (2012) Mechanical and tribological behaviour of coconut shell char reinforced polymer cosmposite. MTech thesis.
Chandrakar, Ashish and Agrawal, Ankit (2015) Study on Fatigue Crack Growth in the Presence of a Hole in the Vicinity of the Crack Path. BTech thesis.
Chandraker, Saurabh (2016) Modelling and Model Reduction of Viscoelastic Composite Rotors - An Operator Based Approach. PhD thesis.
Chatterjee, Suman (2020) Experimental Investigation on Drilling and Welding of Engineering Materials using Laser. PhD thesis.
Chatterjee, Suman (2014) A Study on Parametric Appraisal of Drilling on Bio-compatible Materials. MTech by Research thesis.
Chaudhari, Rohit (2018) Vibration Analysis of Tapered Pre-Twisted Functionally Graded Rotating Blade. MTech thesis.
Chauhan, S (2010) Revival of an Electro-Magnetic Resonance (EMR) Machine. BTech thesis.
Chaurasia, Bipin Kumar (2018) Mechanical and Tribological Behavior of Eulaliopsis Binate (Short Fiber) Reinforced Epoxy Polymer Composite. MTech thesis.
Chavan, Rahul Gautam (2017) Vibration Analysis of Two Moving Masses on Beam. MTech thesis.
Cherukuri, Krishna Swamy (2007) Thermal network theory for switchgear under continuous current. MTech thesis.
Choudhury, Sasanka (2011) Identification of Transverse Crack in a Cracked Cantilever Beam Using Fuzzy Logic and Kohonen Network. MTech thesis.
Chouhan , Abhijeet Singh (2018) Balancing and Control Strategy of Two-Wheeled Self-Balancing Mobile Robot using Hybrid PSO-Fuzzy-PID Controller. MTech thesis.
Chourasiya, Bhuwaneshwar (2007) Navigation of mobil robot using fuzzy logic controller. MTech thesis.
Dahal, Pranesh (2015) Design of Object Identification System Based on Machine Vision. BTech thesis.
Dalai, S K and Chand, P R (2014) Optimisation of abrasive wear of rice husk reinforced epoxy composite by using response surface methodology. BTech thesis.
Das, Debashish and Das, Sambit (2007) Design of the drive mechanism for a reciprocating coal feeder. BTech thesis.
Das, Layatitdev (2012) Prediction of Inverse Kinematics Solution of a Redundant manipulator using ANFIS. MTech thesis.
Das, Samarendra and Nanda, Gopal Krishna (2007) Development of an erosion testing machine. BTech thesis.
Dash, Abhishek and Mohapatra, Anshuman (2015) Atmospheric Water Generator: To Meet the Drinking Water Requirements of a Household in Coastal Regions of India. BTech thesis.
Dash, Pradosh Pritam (2015) Design of Piezoresistive MEMS Accelerometer with Optimized Device Dimension. BTech thesis.
Dawani, Himalaya (2015) Analysis of Spherical Texture On Characteristics of Hydrodynamic Journal Beraing. MTech thesis.
Dewangan, Palash (2009) Passive Viscoelastic Constrained Layer Damping for Structural Application. MTech thesis.
Dewangan, Rahul (2016) Mechanical and Tribological Behaviour of Rubber Wood Powder (Hevea Brasiliensis) Reinforced Epoxy Composite. MTech thesis.
Dewangan, Tikendra (2013) Development of Exponential Model to Find Fatigue Crack Growth and Residual Life for Constant Amplitude Loading. BTech thesis.
Dhakal, Pushpa narayan and Singh, Digvijay (2013) Tribological behaviour of zirconium di-oxide ceramic. BTech thesis.
Dhananjay , Adarsh (2018) Effects of Various Nanofluids on Different Machinability Aspects of AISI 4340 Hardened Alloy Steel. MTech thesis.
Ganguly, Krishanu (2021) Modelling and Analysis of Various Issues in Viscoelastic Composite Rotors. PhD thesis.
Garg, Gaurav Kumar (2015) Investigation into Mechanical and Tribological Behaviour of Hollow Glass Microsphere (HGM) Reinforced Epoxy Composite. MTech thesis.
Garnaik, Sobhan (2010) Computer aided design of jaw crusher. BTech thesis.
Goel, Sitesh (2012) Theoretical and Experimental Investigation Of a Shaft Disc System With a Crack. BTech thesis.
Goudhaman, J (2007) Experimental investigation of hot machining process of high manganese steel using SNMG carbide inserts by design of experiments using taguchi method. BTech thesis.
Gupta, Deepak (2011) Design and Analysis of a Horizontal Shaft Impact Crusher. BTech thesis.
Gupta, Sanyukta (2011) Preparation and Characterization of Waste Silk Fiber Reinforced Polymer Composites. MTech by Research thesis.
Gupta , Rajeev Kumar (2014) Life prediction model for creep-fatigue interaction of P92 advanced grade martensitic steel. MTech thesis.
Gurjar, Ashish Kumar (2015) Design and Analysis of Nano Vibratory Beam Gyroscope. MTech thesis.
Gurung, Diwakar (2017) Implementation of PID and Fuzzy Logic Based Controller in Two Wheel Driven Self-Balancing Robot. MTech thesis.
Hota, Sachidananda (2015) Study, Design and Fabrication of a 3D Printer. BTech thesis.
Inamdar , Prasad Kiran (2013) Free Vibration and Thermal Analysis of Randomly Oriented Carbon Nano Tube Based Functionally Graded Beam. MTech thesis.
Isaac Ivo , de Souza (2018) Development of a Stirling cycle based cryocooler. MTech thesis.
Jalli, Sagar Kumar (2018) Numerical study to optimize the heat transfer rate of
Jawale, Praneet Parmeshwar (2017) Design and Analysis of Electromagnetic Energy Harvester for Improvising Harvester Potential. MTech thesis.
Jena, Rini (2016) Free Vibration and Buckling Analysis of Sandwich Plate. MTech thesis.
Jena, Swarup Raj (2015) Design and Fabrication of Automatic Floor Cleaner. BTech thesis.
Jha, Alok Kumar (2009) Mechanical Characterization and Solid Particle Erosion Response of Particulate Filled Jute-Epoxy Composites. MTech thesis.
Jha , Amit Kumar (2007) Free vibration analysis of sandwich panel. MTech thesis.
K, Venkata Sai Gopal (2007) Static analysis of cross-ply laminated composite plate using finite element method. MTech thesis.
Kanhar, Sunil Kumar and Senapati, Sudipta (2007) Analytical approach to the determination of dynamic characteristics of a cracked beam. BTech thesis.
Karnal, Prashanth B and Karthik, Santhosh and Sethi , Dibyajyoti (2013) Conversion of a circumferentially cracked pipe into a beam and prediction of fatigue crack propagation in a beam using FRANC 2D. BTech thesis.
Kashyap, Sudhir Kumar (2012) Optimisation of Support Parameters in Mining Terrain using Artificial Intelegent Techniques. PhD thesis.
Kawar, Bijay Kumar (2015) Development of Software for Different Textured Profile Thrust Bearing. BTech thesis.
Khan, Akhtar (2018) Machinability Assessment of Commercially Pure Titanium (CP-Ti) Grade 2 during Turning Operation. PhD thesis.
Khare, A (2014) Study of dynamic stress and estimation of life for viscoelastic rotor-a finite element approach. MTech thesis.
Khatua, Bapuji (2015) Numerical Analysis of Orifice-Type Aerostatic Thrust Bearing. BTech thesis.
Khayum, Naseem (2021) Studies on a Dual Fuel Engine with a Waste Heat Recovery Unit. PhD thesis.
Khetan , Rohit (2013) Stress analysis of thick walled cylinder. BTech thesis.
Kishore, M. L. Pavan (2017) Hydrodynamic Design Structural Analysis and Optimization of Marine Propeller Blade. PhD thesis.
Kispotta, Raj Kumar (2009) Vibration Analysis of a Cracked Shaft Using FEM. BTech thesis.
Koteswararao, D (2020) Dynamic Analysis and Active Control of Functionally Graded Rotor Shaft System. PhD thesis.
Kumar, Abhishek (2015) Experimental Investigations on Machining of CFRP Composites: Study of Parametric Influence and Machining Performance Optimization. PhD thesis.
Kumar, Avinash (2018) Free Transverse Vibration Analysis of Thin Rectangular Plates Having Arbitrarily Varying Non-Homogeneity Along Two Concurrent Edge. MTech thesis.
Kumar, Ch Sateesh (2018) Effect of Surface Modifications on the Hard Turning Performance of Al2O3/TiCN Mixed Ceramic Cutting Tools. PhD thesis.
Kumar, Chitranjan (2016) Aerodynamic Analysis of Spiral Grooved Gas Thrust Bearing. MTech thesis.
Kumar, D. Jaswant (2013) Aerodynamic Analysis of Compliant Thrust Foil Bearings. BTech thesis.
Kumar, Peeus (2016) Dynamic Analysis of Rotating Bladed Disk with Underplatform Damper. MTech thesis.
Kumar, Pradeep (2011) Optimization of structural parameters using artificial neural network for vibration reduction in beams. BTech thesis.
Kumar, Praveen (2012) Mechanical Behavior of Orange Peel Reinforced Epoxy Composite. BTech thesis.
Kumar, Priyadarshi Biplab (2019) Motion Planning Strategies for Humanoid Robots Using Computational Intelligent Techniques with Computer Vision Assistance. PhD thesis.
Kumar, Ravi (2011) Design Fabrication and Testing of Gearbox for Fault Detection. BTech thesis.
Kumar, Sikandar (2014) Active vibration control of rotating composite shaft system. MTech thesis.
Kumar, V Rakesh (2013) Teaching Learning based Optimization Applied to Mechanical Constrained Design Problems. MTech thesis.
Kumar, Vikash (2018) Fabrication of Compression Moulding Machine and Analysis of Fiber Reinforced Polymer Composites Using Finite Element Method. MTech thesis.
Kumar , Ranjan (2014) Fault Diagnosis of Inclined Edge Cracked Cantilever Beam Using Vibrational Analysis and Artificial Intelligence Techniques. MTech thesis.
Mahapatra, Mitrabhanu and Biswal, Satya Prakash (2007) Finite element analysis of multifarious machine components. BTech thesis.
Maharana, Pradyumna Keshari (2012) Computer aided analysis and design of hoisting mechanism of an E.O.T crane. BTech thesis.
Majumder, Himadri (2019) Experimental Investigations on Machinability Aspects of Nickel-Titanium Based Alloys during Wire Electrical Discharge Machining. PhD thesis.
Mandal, Dinesh Kumar and Mahapatra, Manik Chandra (2007) Dynamic sability of rotating shaft under parametric excitation subjected to specified boundary conditions. BTech thesis.
Manhare, Devendra Kumar (2018) Static and Vibration Analysis of Aluminium and Carbon Hybrid Composite Plate. MTech thesis.
Maurya, Gaurav (2013) Analysis of gyroscopic effects in rotor disc systems. MTech thesis.
Meena, Vishvendra and Saroya, Avtar (2011) Study of Mechanical Properties of Hybrid Natural Fiber Composite. BTech thesis.
Mehar, Suraj Kumar (2009) Weathering Behaviour of Bagasse Fiber Reinforced Polymer Composite. MTech by Research thesis.
Meher, Siddharth (2014) Development of a Software for Rotodynamic Analysis Of Flexible Rotor. BTech thesis.
Meher, Sudhansu (2012) Dynamic Response of a Beam Structure to a Moving Mass Using Green’s Function. MTech thesis.
Mishra, Devasis (2016) Dynamic Behavior of Damaged Beam Subjected To Moving Mass. MTech thesis.
Mishra, Himanshu (2017) Modeling and Optimization of Micro-EDM Operation for Fabrication of Micro Holes. PhD thesis.
Mishra, Punyapriya (2007) Effect of environment on mechanical properties of bagasse fiber reinforced polymer composite. MTech thesis.
Mishra , Samarth (2015) Dynamic Stress Analysis of Viscoelastic Rotor. MTech thesis.
Mogal, Shyam (2009) Vibration Analysis of Cracked Beam. MTech thesis.
Mohammed, Zuberuddin (2009) Study on the Effects of Band Overload on Fatigue Crack Growth Retardation. MTech thesis.
Mohan, Sagar (2016) Non-Prismatic Energy Harvester for Rotating System. MTech thesis.
Mohanta, Niharika (2016) Preparation and Characterization of Luffa Cylindrica Fiber Reinforced Polymer Composite. PhD thesis.
Mohanty, Ramesh Chandra (2010) Damping of Layered and Jointed Beams with Riveted Joints. PhD thesis.
Mohapatra, Lopamudra (2018) Characterization & Abrasive Wear Behavior of Bio-fiber Based Carbon Black Reinforced Epoxy Composites. MTech thesis.
Mohapatra, Saktiswarup (2017) Kinematic Analysis and Path Planning of Humanoid NAO. MTech thesis.
Mutalikdesai, Pavan Ramesh (2013) Study of Modal Behaviour of Viscoelastic Rotors Using
Mutra, Rajasekhara Reddy (2019) Dynamics and Control Simulations of Turbocharger Rotor-Bearing Systems. PhD thesis.
Nahak, Pradeep (2017) Dynamics of Cracked Viscoelastic Beam Using Operator Based Finite Element Approach. MTech thesis.
Nalla, Thulasiram (2007) Vibration analysis of a cracked beam with elastic support. MTech thesis.
Nanda, Abhishek (2015) Finite Element Modelling and Analysis of Carbon Nanotobe Based Nano Composite Structures. BTech thesis.
Nayak, Debasish (2015) Study, Design and Fabrication of a 3D Printer. BTech thesis.
Nayak, Prajapati (2015) Investigation in to Mechanical and Tribological Behaviour of Orange Peel Reinforced Epoxy Composite. MTech thesis.
Nayak, Pritish Kumar (2018) Processing, Characterisation and Mechanical Behaviour of Rice Husk Filled Jute Epoxy Hybrid Composite. MTech thesis.
Nayak, Sarthak Arooni (2015) Study, Design and Fabrication of a 3D Printer. BTech thesis.
Nayak, Shibani Shankar (2013) Vibrational analysis of a simply supported beam with crack. BTech thesis.
Nayak, Shreemoy Kumar (2015) Design of Kinetic Energy Recovery System for Bicycle. BTech thesis.
Nayak , Satyabrata (2018) Design and Simulation of Linear or Rotary Electromagnetic Actuator. MTech thesis.
Nial, Tophan and Reddy, Gogireddy Ravindra and Gaihre, Kosish (2013) Vibration Analysis of Rotor Shaft System using Journal Bearing. BTech thesis.
Nigam, Kushagra (2012) Synthesis of Planar Parallel Mechanism. BTech thesis.
Noor, SK Noor Mohammad (2015) Erosive Wear Behaviour of Orange Peel Char Reinforced Epoxy Composites. BTech thesis.
obbineni, mallikarjanareddy (2013) Dynamic stability analysis of a sandwich beam with functionally graded material constraining layer. MTech thesis.
Pandey, Ankit Kumar (2016) Studies on Parametric Appraisal of Friction Stir Welding. MTech by Research thesis.
Pandey, Krishna Kant (2020) Intelligent Trajectory Planning and Navigational Analysis of Wheeled Mobile Robot in Cluttered Workspace. PhD thesis.
Parhi, Debasis (2018) Numerical Study of Shell and Tube Heat Exchanger Using C.F.D. MTech thesis.
Pati, Swarupa Ranjan (2015) Three-Body Abrasive Wear Behaviour of Jute-Glass Reinforced Epoxy Composite. BTech thesis.
Patil, Dinesh (2015) Thermo-Mechanical Stress Analysis of Functionally Graded Tapered Shaft System. MTech thesis.
Patnaik, S Srikant (2022) Dynamic Analyses of CNT-based Viscoelastic Composite Shell Structures in Hygrothermal Conditions. PhD thesis.
Patnaik, Sidhartha and Pattnaik, Biswajit (2007) Design and Analysis of Impact Crushers. BTech thesis.
Patra, Abhishek (2018) Static and Vibration Analysis of Glare Hybrid Composite. MTech thesis.
Patra, Laxmi Narayan (2012) 3D Analysis of Combined Extrusion-Forging Processes. PhD thesis.
Patra, Pravajyoti (2015) Aerodynamic Analysis of Pivotless Tilting Pad Gas Journal Bearing. MTech thesis.
Patra, S (2010) Design and Modeling of Axial Micro Gas Turbine. BTech thesis.
Patra, Sitakant (2010) Design And Modeling of Axial Micro Gas Turbine. BTech thesis.
Pattanaik, Samarendra (2016) Improvement in Service Life of Skip Car by Using Chromium Carbide Overlay Plate with Special Reference to Rourkela Steel Plant. MTech by Research thesis.
Paul, Binay Kumar (2018) Performance of Additive mixed Electro-Discharge Machining of Inconel 718 Super Alloys. MTech thesis.
Pol, M S (2014) Navigation of mobile robot in cluttered environment. MTech thesis.
Potnuru, Srikar (2016) Numerical, Analytical and Experimental Analysis of Combined Extrusion Forging Processes Applied to Collet Chuck Holders. PhD thesis.
Pradhan, Biren Kumar (2018) Static and Dynamic Analysis of Gas Foil Journal Bearing for High-Speed Rotor. MTech thesis.
Pradhan, Premendra Mani (2016) Modelling and Prediction of Low Temperature Fatigue Life of 7075-T651 Aluminium Alloy. MTech thesis.
Pradhan, Rama Prasanna (2015) Friction and Wear Behaviour of Cenosphere Dispersed Aluminium Matrix Composite Fabricated by Powder Metallurgy Route. MTech thesis.
Pradhan, Swastik (2017) Investigation of Machinability of Titanium Alloy (Grade 5): Experimental and Numerical Analysis. PhD thesis.
Pradhan , Diptimayee (2018) CFD Analysis of Regenerator of a GM cryocooler. MTech thesis.
Pradhani, Amit Kumar (2015) Design, Fabrication & Testing of Alignment Test Set Up. BTech thesis.
Praharaj, Rajendra Kumar (2015) Design and Development of Liquid Nitrogen Storage Vessel Using ASME Boiler and Pressure Vessel Code. MTech thesis.
Prakash, Ved (2018) Mechanical and Erosion Wear Behavior of Syngonanthus Nitens Fiber Reinforced Epoxy Composite. MTech thesis.
Praveen, K (2015) Modal Reduction of Viscoelastic Beam Cosidering Higher Order System. MTech thesis.
Priyadarshini, Amrita (2007) A study of the effect of cryogenic treatment on the performance of high speed steel tools and carbide inserts. MTech thesis.
Priyadarshini, Manisha (2021) Wire Electro-discharge Machining of Sub-cooled AISI P20 Tool Steel. PhD thesis.
Rahul, . (2016) Vibration Analysis of Nanocomposite Shell Structures. MTech thesis.
Ramteke, Prashik Malhari (2018) Design and Dynamic Analysis of Laminated Smart Composite Plate. MTech thesis.
Rana, Hemanta Kumar (2012) Dynamic analysis of fixed-fixed beams. MTech thesis.
Ranjan, Vivek Kumar (2015) Design, Fabrication & Testing of Shaft Alignment Test Set Up. BTech thesis.
Ravindra, Sonawane Ishan (2013) Static and Dynamic Analysis of High Contact Ratio Spur Gear Drive. MTech thesis.
Rawat, Himanshu (2018) Path Planning and Control of various moving robots using Artificial Intelligence techniques in unknown cluttered environment. MTech thesis.
Rout, Akshaya Kumar (2010) A Class of Solutions for Extrusion through Converging Dies. PhD thesis.
S , Sujaykhosh (2018) Effect of Silicon Carbide as Filler Reinforcement on the Damping properties of Glass-Fibre Epoxy Composites. MTech thesis.
Saha, Shubhendra Nath (2013) Aerodynamic analysis of compliant journal foil bearings. BTech thesis.
Sahoo, Biswajit (2015) Vibration Analysis of Cantilever Beam With Two Inclined Cracks and Its Implementation in Fault Diagnosis. MTech thesis.
Sahoo, Biswajit (2018) Study and Analysis of Mobile and Humanoid Robots using Intelligent Optimization Techniques. MTech thesis.
Sahoo, Chinmaya Kumar (2017) Development of TiC Based Wear Resistance Composite Coating on AISI 304 Steel by Pulsed Laser and TIG Cladding Process. PhD thesis.
Sahoo, Deepak Kumar (2015) Fabrication of Functionally Graded Material (FGM) Set-Up. BTech thesis.
Sahoo, Manas Kumar (2017) Design and Stability Analysis of Biped Robot with Walking Pattern Synthesis. MTech thesis.
Sahu, Chandan Kumar (2014) Design of Blade Contour for High Speed Expansion Turbine. BTech thesis.
Sahu, Jagannatha (2013) Study of tensile and flexural properties of luffa fiber reinforced epoxy composite. BTech thesis.
Sahu, Sibasish (2016) Free Vibration Study of Sandwich Plate With Different Boundary Conditions. MTech thesis.
Sahu, Vaneshwar kumar (2009) Study on the Effect of Pre-Corrosion on Crack Initiation and Fatigue Life of an Aluminum Alloy. MTech thesis.
Sahu, Vaneshwar Kumar (2017) Modelling and Prediction of Fatigue Crack Growth in Part-Through Cracked Pipes under Bending Load. PhD thesis.
Saikia, Nihar (2015) Static and Free Vibration Analysis of a Sandwich Beam with Partial Constraining Layer with MR Fluid Core. MTech thesis.
Salgar , Manojkumar Madhukar (2013) Dynamic Modeling of AFM Cantilever Probe Under Base Excitation system. MTech thesis.
Samal, Sangram Kumar (2021) Thermo-Hydrodynamics of Single-Phase and Two-Phase Flow Boiling in a Novel Design Recharging Microchannel Heat Sink. PhD thesis.
Samal, Sumit Kumar (2009) Study of Parameters of Ultrasonic Machining. BTech thesis.
Sarangi, Sambit (2014) Dynamic analysis of a wind turbine blade. BTech thesis.
Satapathy, Sourav Bikash (2015) Development of an Experimental Set-Up for Producing Metal and Ceramic Functionally Graded Materials. BTech thesis.
Satpathy, Mantra Prasad (2017) Ultrasonic Spot Welding of Dissimilar Metal Sheets: An Experimental, Numerical and Metallurgical Investigation. PhD thesis.
Satyanarayan, Shivakumar and Patel, Amarendra Kumar (2007) Dynamic stability of layered beams with bolted joints under parametric excitation. BTech thesis.
Sethi, Durjyodhan (2014) Hydrodynamic analysis of different textured profile thrust bearing. MTech thesis.
Sethi, Mohan Charan (2012) Dynamic Response of Beam Under Moving Mass. BTech thesis.
Shaik, Jakeer Hussain (2017) Studies on Design of Spindle-tool System and Their Effects on Overall Milling Process Stability. PhD thesis.
Shaik, Sadikababa (2007) Dynamic stability of multilayered beam with bolted joints. MTech thesis.
Shaik, Zuneid Alam (2009) Design and Development of a Solar Dryer. BTech thesis.
Shamim, Kausar (2015) Erosive Wear Behavior of Pomegranate Peel Reinforced Epoxy Composite. BTech thesis.
Sharan, Alankar and Kumar, Atul (2008) Vibrational analysis of sandwich beams. BTech thesis.
Sharma, N (2014) Study of water absorption behaviour of natural fibre reinforced composites. MTech thesis.
Shereef , Amal Hisham E. (2017) A Reduced Model of Higher Order Viscoelastic Rotor Using Modified SEREP. MTech thesis.
Shukla, Rishi Kumar (2013) Vibration Analysis of Tapered Beam. MTech thesis.
Shukla, Shankar Prasad (2011) Investigation in to tribo potential of rice husk (RH) char reinforced epoxy composite. MTech thesis.
Singh, Abhilekh (2016) Free Vibration Analysis of Sandwich Shell. MTech thesis.
Singh, Akhileshwar (2013) Analysis of stiffened rectangular plate. MTech thesis.
Singh, Devender (2018) Finite Element Modeling and Dynamic Analysis of Propulsion Rotor System. MTech thesis.
Singh, Digvijay (2013) Tribological behaviour of zirconium di-oxide ceramic. BTech thesis.
Singh, Gaurav Jaiprakash (2018) Static and Vibration Analysis of Glass Aluminium Reinforced Epoxy(glare) Cylindrical Panel. MTech thesis.
Singh, R K (2014) Thermal buckling analysis of laminated composite shell panel embedded with shape memory alloy fibre under TD and TID. MTech thesis.
Singh, Rahul (2016) Analysis and Parametric Identification of Air Foil Bearing Rotor System. MTech thesis.
Singh, Sarthak Sambit and Patnaik, Shantanu and Tripathy, Suraj (2011) Fatigue Crack Growth of Circular Pipes and Modeling of Single-Edge-Notched Tension (SENT) Specimen. BTech thesis.
Singh, Ved Prakash (2017) Studies on Effect of Rotor Crack on Dynamics Characteristic Using Numerical Methodology. MTech thesis.
Singh, Vivek (2011) A Brief Study on Dynamics of Viscoelastic Rotors – An Operator Based Approach. MTech thesis.
Singh , Harshdeep (2013) Design of water level controller using fuzzy logic system. BTech thesis.
Singh , Vivek Pratap (2018) Investigations on Sudden Unbalance Effects in Overhung Bowed Rotor System. MTech thesis.
Sonavane, Sagar Sambhaji (2017) Vibration Energy Harvesting from Piezoelectric Laminated Cantilever Beam. MTech thesis.
Sood, Anoop Kumar (2011) Study on Parametric Optimization of Fused Deposition Modelling (FDM) Process. PhD thesis.
Srivastava, Tushar (2017) CFD Analysis of Fin and Tube Heat Exchangers using ANSYS CFX. MTech thesis.
Suna, Bhagyashree (2014) Design and Analysis of Laminated Composite Materials. BTech thesis.
Sutar, Mihir Kumar (2009) Fault Detection of Cracked Cantilever Beam Sing Smart Technique. MTech thesis.
Swain, Mahendra Kumar (2018) Forced Vibration of Isotropic and Nonhomogeneous Rectangular Plate of Linearly Varying Thickness. MTech thesis.
Swain, Prasant Kumar (2015) Effect of Displacement Increment on Fracture Toughness (JIc) of HSLA Steel. MTech thesis.
Swain, S (2014) Stress analysis of high speed turbomachine. BTech thesis.
Teli, Satish Balaso (2015) Modeling and Analysis of Bimorph Piezoelectromagnetic Energy Harvester. MTech thesis.
Tenali , Vijaya Sagar (2007) Simulation of electro-hydraulic servo actuator. MTech thesis.
Thakur, Aruna (2016) Influence of Advanced Coated Tools on Machinability Characteristics of Incoloy 825. PhD thesis.
Thakur, Arvind Kumar (2016) Elastic and Thermal Analysis of Clay/Polymer Nanocomposite Material. MTech thesis.
Thrinadh, Jadam (2020) Experimental Studies on Machinability Assessment of Difficult-to-Cut alloys (Inconel 718 and Ti-6Al-4V) During Traditional and Non-Traditional Machining. PhD thesis.
Tiwari, Pawan Kumar (2016) Vibration Analysis of CNT Based Functionally Graded Shell
Tiwari, R and Sameer, S and P.B.S, S (2014) Tribological behaviour study of ceramic composites. BTech thesis.
Tudu, Kapura (2017) Experimental Studies of a Direct Injection Diesel Engine Fuelled with Light Fraction Pyrolysis Oil-Diesel Blend. PhD thesis.
Upadhyay , Shivam (2018) Dynamic Analysis of Cracked Viscoelastic Beam with Circular Cross Section using an Operator Based Finite Element Approach. MTech thesis.
Vasu, Posipogu Shanmukha (2016) Tribological Behaviour of Epoxy Composites Reinforced with Micro-Sized Red Mud Particles. MTech thesis.
Veluri, Gangadhar (2011) Rub-impact analysis in rotor dynamic systems. MTech thesis.
Verma, Naveen Kumar (2016) Nonlinear Free Vibration Analysis of Tapered Hollow Beam. MTech thesis.
Verma, Navneet Kumar (2017) Design and Control of 7 Degree of Freedom Redundant Manipulator Arm using V-REP. MTech thesis.
Verma, Yogesh (2014) Comparative study between various reduced model and modal analysis of viscoelastic rotors. MTech thesis.
Yuva Raju, Bonda Atchuta Ganesh (2021) Signal Analysis and Chatter Control Studies in Internal Turning Operations. PhD thesis.