Items where Subject is "Engineering and Technology > Mechanical Engineering > Production Engineering"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type
Jump to: Thesis
Number of items at this level: 363.

Thesis

Kishor, Ved Prakash (2013) Modelling of micro electro discharge machining in aerospace material. MTech thesis.

Agrawal , Parbesh (2013) Evaluation of surface roughness and MRR of EN18 steel tool in EDM process. BTech thesis.

Bhagat, Vineet Kumar (2013) Processing, Characterization and Mechanical Behaviour of Coir/Glass Fibre Reinforced Epoxy Based Hybrid Composites. MTech thesis.

Bican , Lokesh Kumar (2013) Optimization of Electrical Discharge Machining
Parameters Using Genetic Algorithm Technique.
BTech thesis.

Biswal, Shatabdi (2013) Fabrication of abrasive jet machine. BTech thesis.

Das, Pratik (2013) Decision-making scenario towards Supply chain performance assessment in Fuzzy Context. BTech thesis.

Jena, Sampreeti (2013) Multi-Objective Optimization of the Design Parameters of a Shell and Tube Type Heat Exchanger Based on Economic and Size Consideration. BTech thesis.

Kumar, Abhishek (2014) A study on mechanical and sliding wear behaviour of e-glass fibre reinforced epoxy composites. MTech thesis.

Marandi, Amit Kumar (2013) Scalability planning for reconfigurable manufacturing system using simulated annealing. BTech thesis.

Mohanta, Malay Kumar (2013) Lean Metric Evaluation in Fuzzy Environment. BTech thesis.

Mohapatra, Raj Amrit (2013) Multi Objective Optimization of Cutting Parameters in Turning Operation to Reduce Tool Vibration and Cutting Forces. BTech thesis.

Navyanth , Kusampudi (2013) Minimization of defects in aluminium alloy castings using SQC. BTech thesis.

Raj, Rahul (2013) Compression test of aluminium alloy at different strain rate. BTech thesis.

Rout, Amruta (2013) Non-conventional Machining of Metal Matrix Composites: Parametric Appraisal and Multi-Objective Optimization. MTech thesis.

., Choppakalyan (2013) Laser coating of titanium carbide on stainless steel substrate. BTech thesis.

., K. Ushashri (2013) Laser assisted titanium carbide (TiC) coating on AISI304 stainless steel. MTech thesis.

., Priyanka (2014) Multi Response optimization of characteristics of AISI D2 steel using utility concept and harmonic search method machined with different tool materials. MTech thesis.

., Ranjeet (2017) Three Dimensional Analysis of Combined Extrusion-forging Process. MTech thesis.

., Ritesh Prasad (2018) Study the Microstructural and Mechanical Behaviours
of Large Surface area Cladding of NiTi on Ti-Alloy by
TIG Surface Modification Technique.
MTech thesis.

., Sweta Saroj (2017) Deposition of TiC-INCONELl825 Composite Coating on AISI 304 Steel By TIG Cladding Process. MTech thesis.

Abhishek, Sonu (2013) Processing, characterization and mechanical behavior of coir fiber reinforced epoxy Composites. BTech thesis.

Abhishek , . (2016) Ultrasonic Spot Welded Dissimilar Joint of AISI 304SS to CP-Copper Sheets with Inter Layer: An Experimental Investigation. MTech thesis.

Aditya, . (2014) Resilient supplier selection through fuzzy-topsis. BTech thesis.

Agarwal, Deepak Kumar (2012) GRA Coupled with Fuzzy Linguistic Reasoning for Quality Productivity Improvement in Electrical Discharge Machining (EDM). BTech thesis.

Agarwal, Ricky (2010) Optimization of Process Parameters of Micro Wire EDM. BTech thesis.

Agnihotri, Vaibhav Kumar (2015) Electrical Discharge Machining of Cu-Al2O3 Metal Matrix Composites. MTech thesis.

Agrawal, Jatin (2012) A study on analysis and prediction of erosion response of plasma sprayed titania coatings. BTech thesis.

Agrawalla, Y (2014) Optimization of machining parameters in a turning operation of austenitic stainless steel to minimize surface roughness and tool wear. BTech thesis.

Ahirwar, Pankaj (2015) Experimental Investigation on Autogenous Tungsten Inert Gas (TIG) Welding of AISI 1020 Mild Steel. MTech thesis.

Anand Amrit , Raj (2010) Economic Design of Control Chart. BTech thesis.

Anandita, S (2014) Application of MoS2 based cutting fluids in minimum quantity lubrication during machining of stainless steel AISI 316. MTech thesis.

Arka, G N (2014) Optimization of the machining parameters for ultrasonic vibration assistedturning of hard material. MTech thesis.

Ashirbad, Swain (2012) Analysis of machine tool structure using RSM approach. MTech thesis.

Azim, Sabana (2016) Effect of Cutting Parameters on Micro Drilling Characteristics of Incoloy 825. MTech thesis.

Bagal, Dilip (2012) Experimental investigation and modeling micro-drilling operation of aerospace material. BTech thesis.

Bagal, Dilip Kumar (2015) Experimental Investigation and Optimization of Cutting Parameters in Plasma Arc Cutting. MTech by Research thesis.

Bagh, Ashwin kumar and Behera, Nikesh kumar (2007) Detecting shift in a Weibull process using bootstrap method. BTech thesis.

Bal, Kalinga Simant (2012) Performance appraisal of cryo‐treated tool by turning operation. MTech thesis.

Balasankula, Praneeth Kumar (2012) Comparison of damping on various joint structures. MTech thesis.

Bansal, Rajan (2011) Improving dimensional accuracy of fused deposition modelling (FDM) parts using response surface methodology. BTech thesis.

Baral, Ansuman (2014) Flexible job shop scheduling operation. BTech thesis.

Barik, A K (2010) Joining of Dissimilar Materials using:Yag Laser Welding. BTech thesis.

Behera, A (2014) Optimization of process parameters in laser welding of dissimilar materials in lap joint configuration using multi-objective Taguchi analysis. MTech thesis.

Behera, Bikash Chandra (2011) Development and experimental study of machining parameters in ultrasonic vibration-assisted turning. MTech thesis.

Behera, Bismay Kumar (2011) Parametric optimizartion of microdrilling in aerospace material. BTech thesis.

Behera, Lokanath (2013) A conceptual design of pattern to replace investment casting. BTech thesis.

Behera, S (2010) Study on Mechanical Behavior of Polymer based Composites with and without Wood Dust Filler. BTech thesis.

Behera, Swayatt (2013) Finite Element Modelling and Analysis of Hot Turning Operation. BTech thesis.

Behera, Umakanta (2012) Application of Fuzzy Logic and TOPSIS in the
Taguchi Method for Multi-Response Optimization in Electrical Discharge Machining (EDM).
BTech thesis.

Benarji, Koyilada (2015) Effect of Tool Coating and Cutting Environment on Machinability Characterstics of Nimonic C-263. MTech thesis.

Bhanja, Aditya (2009) Design of Instrumented Gripper. BTech thesis.

Bhuyan, Pranjal (2018) Effect of Operating Conditions, Lobe-number, Clearance Size and Rotor Profile on the Transient Hydrodynamics, Heat Interaction, and Performance of a Root Blower. MTech by Research thesis.

Bhuyan, Rajat Narayan (2011) Material Flow System in Robotic Assembly. BTech thesis.

Biswal, Deepak Kumar (2019) Study on Buckling, Free Vibration and Parametric Resonance of Sandwich Shell Panels with Viscoelastic Material Core. PhD thesis.

Boipai, Budhram (2014) FEM analysis for WEDM process. MTech thesis.

Boity, Biswajit (2011) Dry sliding wear response of LD slag filled poly-ether-ether ketone composites. BTech thesis.

Bondada , Vinay (2018) Effect of Magnetic Field on MRR and surface Roughness in Electrochemical Machining. MTech thesis.

C, Madan Raj (2018) Determination of Safety Integrity Level of a Sugar Plant
using Modified LOPA and Modified Safety Design of
a Vacuum Breaker Valve.
MTech thesis.

Chaine, Sarat Chandra (2020) Investigation of Micro-drilling of Aerospace Materials: Modeling and Optimization. PhD thesis.

Chakravarty, Maussam (2015) A Theoretical Decision Making Framework on the Assessment of Leagility Index in a Supply Chain Management. BTech thesis.

Chatterjee, D (2010) Prediction of Multi Responses in Radial Drilling Process using Mamdani Fuzzy Inference System. BTech thesis.

Chaturvedi, Vedansh (2009) Parametric Optimization of Fused Deposition Modeling using Response Surface MEthodology. MTech thesis.

Chaubey, Santosh (2011) Modeling and Design of Die Profile of Extrusion of Square Section from Round Billet through Non-linear Converging Dies. MTech thesis.

Cherukuri, Surinarayana (2016) Experimental and Numerical Analysis of Angular Error in Taper Cutting Using Wire Electrical Discharge Machining. MTech thesis.

Chide, Punit Shankar (2017) Experimental Investigation of Various Surface Integrity Aspects in Hard Turning of AISI 4340 Alloy Steel With Coated and Uncoated Cermets. MTech thesis.

Choudhury, Ajoy Kumar (2011) Investigation on electrochemical machining(ECM) for optimization of surface roughness using response surface methodolgy(RSM). BTech thesis.

Choudhury, Gourav (2014) Barrelling test of t-section aluminium billet at room temperature. BTech thesis.

Choudhury, Malay Milan (2015) Use of Multi-Criteria Decision Making in Establishment of Solar Power Plant in NIT Rourkela. BTech thesis.

Choudhury, Suryansh (2012) Multi Objective Optimization of Cutting Parameters in Turning Operation to Reduce Surface Roughness and Cutting Forces. BTech thesis.

Chouksey, Ashutosh (2012) Study of parametric optimization of fused deposition modelling process using response surface methodology. BTech thesis.

D, Tijo (2014) Electrical discharge coating of ceramic metal composite on metal substrate using powder compact electrodes. MTech thesis.

Dalai, Harekrushna (2011) Case studies on productivity improvement and supplier selection. BTech thesis.

Darun , Prasath.L (2011) Economic design of X-bar control chart using simulated annealing. BTech thesis.

Das, A (2010) Project on Silk Reinforced Fiber Composites. BTech thesis.

Das, Jayadev (2015) Design and Development of a Powder Feeding system For Tungsten Inert Gas (TIG) Cladding. BTech thesis.

Das, M K (2014) Selected heuristic algorithms for solving job shop and flow shop scheduling problems. BTech thesis.

Das, Nishan (2012) A study on analysis and prediction of erosion response of plasma sprayed alumina coatings. BTech thesis.

Das, Samarendra and Nanda, Gopal Krishna (2007) Development of an erosion testing machine. BTech thesis.

Das, Siddharth (2015) Multi-Objective Optimization in Machining (Turning) of Copper. BTech thesis.

Das, Soumyajit (2015) CFD Modeling and Optimization of Magneto-rheological Abrasive Flow Finishing (MRAFF) Process. MTech thesis.

Dash, Anshuman (2010) A Case Study to Solve Multi-Response Optimization Problem. BTech thesis.

Dash, Sudhir Kumar (2012) Multi Objective Optimization of Cutting Parameters in Turning Operation to Reduce Surface Roughness and Tool Vibration. BTech thesis.

Dash, Vaibhav (2010) Bulging Test of Aluminium at room temperature. BTech thesis.

Debasish, Das (2009) ANT Colony Optimisation Applied to Job Shop Scheduling Problem. BTech thesis.

Dehury, Janaki (2013) Processing & characterization of jute/glass fiber reinforced epoxy based hybrid composites. MTech thesis.

Deo, Chitta Ranjan (2010) Polymer Matrix Composite using Natural Fiber Lantana-Camara. PhD thesis.

Devireddy, Siva Bhaskara Rao (2017) Mechanical, Thermal and Physical Properties of Hybrid Banana-Jute Fibers Reinforced Epoxy and Polyester Composites: Modeling and Experiments. PhD thesis.

Dewangan, Shailesh kumar (2010) Experimental Investigation of Machining Parameters for EDM Using U-shaped Electrode of AISI P20 Tool Steel. MTech thesis.

Dewangan, Shailesh Kumar (2014) Multi-objective optimisation and analysis of EDM of AISI P20 tool steel. PhD thesis.

Dey, Biswajit (2018) Selection of Dielectric Media (Kerosene and Used Transformer Oil) towards Improving Efficiency of Powder-Mixed EDM. MTech thesis.

Dhakal, Bijay (2013) A study on the effect of fiber loading and orientation on mechanical behaviour of jute fiber reinforced epoxy composites. BTech thesis.

Dhananjay, Adarsh (2018) Effects of Various Nanofluids on Different Machinability Aspects of AISI 4340 Hardened Alloy Steel. MTech thesis.

Dhananjay , Adarsh (2018) Effects of Various Nanofluids on Different Machinability Aspects of AISI 4340 Hardened Alloy Steel. MTech thesis.

Gajannavar, Benakanaik (2009) Creative Design of Pattern for Sand Casting of Turbine Blade. BTech thesis.

Ganguly, Abhijeet (2016) Economic Design of Control Charts Using Metaheuristic Approaches. PhD thesis.

Ganguly, Krishanu (2021) Modelling and Analysis of Various Issues in Viscoelastic Composite Rotors. PhD thesis.

Ganjir, Rahul (2011) Optimisation of Process Parameter in ECM by using Rotary U Shaped tool. MTech thesis.

Ganti, Vinay (2011) Analysis of 4-dof force/torque sensor for intelligent gripper. BTech thesis.

Garanayak , Shakti Ranjan (2013) CFD analysis and Optimization of Abrasive Flow Machining. MTech thesis.

Garg, Akhil (2010) A Fuzzy-Taguchi Approach for Improving Dimensional Accuracy of Fused Deposition Modelling (FDM) Built Parts. BTech thesis.

Gattu, Naga Pavan Kumar (2016) Surface Modification of AISI 304 Stainless Steel by Electrical Discharge Coating Using Powder Suspension Method. MTech thesis.

Gautam, A K (2014) Solution of different multi-criteria decision making engineering problems by PROMETHEE II and VIKOR. BTech thesis.

Geoffrey, Omosa B Michael (2015) Decision Support System for Managing Reverse Supply Chain. MTech thesis.

Ghosh, Abhijeet (2018) Study of Mechanical and Tribological Properties of AZ91/SiC Composites. MTech thesis.

Gidhi, Pradyumna Kumar (2012) Scheduling of Flexible Manufacturing Systems using Intelligent heuristic search algorithm (IHSA*). BTech thesis.

Gochhayat , Soumya Ranjna (2015) Tungsten Inert Gas (TIG) Assisted TiC-NiCoating on AISI 304 Stainless Steel. BTech thesis.

Goutam, Rohit Kumar (2012) Optimization and Experimental Investigation on EN19 Using Hexagonal Shaped Electrode in ECM. BTech thesis.

Goyal, Sumit (2010) Evalutaion of chip breaker using flank wear. BTech thesis.

Gupta, Jaykant (2009) Mechanical and Wear Properties of Carburized Mild Steel Samples. MTech thesis.

Gupta, Nand Lal (2011) Optimization of Micro-Wire EDM Operation Using Grey Taguchi Method. BTech thesis.

Gupta, Rishi and Namdeo Pendam, Ashish (2007) Navigation of mobile robots using artificial intelligence technique. BTech thesis.

Gupta, S K (2014) A study on mechanical behavior of bamboo fiber based polymer composites. BTech thesis.

Gupta, Sanyukta (2011) Preparation and Characterization of Waste Silk Fiber Reinforced Polymer Composites. MTech by Research thesis.

Haldar, Nimai (2018) Experimental Studies on AA6063-Cu Dissimilar Friction Stir Welding Using Inconel 601 Tool. MTech thesis.

Haldigundi, Tapan (2012) Compression test of aluminium at high temperature. BTech thesis.

Hansda, Sanjib Kr. (2011) Machinability Study of AISI 316 Grade Austenitic Stainless Steel Using P 30 Grade Cemented Carbide Insert. BTech thesis.

Haridas, B (2014) A study on mechanical and thermal behavior of coir fiber reinforced epoxy composites. MTech thesis.

Hasda, Ranjan Kumar (2013) Optimization of EDM Process Parameters through Teaching Learning Based Optimization Algorithm. MTech thesis.

Hati, Dinesh Prasad (2015) Comparative Study of Conventional And Minimum Quantity Lubrication During Machining 17-4PH Stainless Steel. BTech thesis.

Hemanth, Poripireddy (2014) Laser coating of titanium carbide and titanium boride on aluminium substrate. BTech thesis.

Irshad , K T (2015) Anvil Design and Experimental Investigation for Ultrasonic Welding of Thin Dissimilar Metals. MTech thesis.

Isaac Ivo , de Souza (2018) Development of a Stirling cycle based cryocooler. MTech thesis.

Islam, Tayyab (2014) Analysis of Dissimilar Metal Welding of 1020 Mild Steel and 304 Stainless Steel. MTech thesis.

Jain, Ashish (2016) Multi-Objective Optimization of Process Parameters for Through-Hole Machining of Ti-6Al-4V Alloy by EDM. MTech thesis.

Jalli, Sagar Kumar (2018) Numerical study to optimize the heat transfer rate of
tube in tube type helical coil heat exchanger.
MTech thesis.

Jaypuria, Sanjib (2009) Heat Treatment of Low Carbon Steel. BTech thesis.

Jena, Priyanka (2012) Estimation of bullwhip effect in supply chain management. MTech thesis.

Jena, Shakti Prasanna (2016) Dynamic Analysis and Fault Detection of Multi Cracked Structure Under Moving Mass Using Intelligent Methods. PhD thesis.

Jha, Panchanand (2009) Novel Artificial Neural Network Application for Prediction of Inverse Kinematics of Robot Manipulator. MTech thesis.

JOSEPH, SHINCE V. (2018) Buckling, Free Vibration and Dynamic Stability of Sandwich Plates with Functionally Graded Material Constraining Layer. PhD thesis.

Joshi , Mayank (2013) Optimization of Micromillingprocess Using Grey Taguchi Method. BTech thesis.

Juvvala, Rambabu (2015) Economic Design of X-bar Control Chart Using Gravitational Search Algorithm. MTech thesis.

Kalo, Roupyakanta (2011) Design of reconfigurable manufacturing system. BTech thesis.

Kanaujia, Kamal Kumar (2011) An Investigation of Dissimilar Welding Joint of AISI 304L
Stainless Steel with Pure Copper by Nd:YAG Pulse Laser: Optimization of Tensile Strength.
MTech thesis.

Kandi, Rudranarayan (2016) Acoustic Horn Design, Numerical and Experimental Investigations of Ultrasonic Vibration Assisted Turning of Ti-6Al-4V. MTech by Research thesis.

Karuturi, Poorna Chandu (2013) Application of Fuzzy Logic on Understanding of Risks in Supply Chain and Supplier Selection. MTech thesis.

Kesarwani, Vishal (2011) Investigation on Electric Discharge Machine for optimization of Surface Roughness using Response Surface Methodology approach. BTech thesis.

Kesharwani, Ramkumar (2010) High Temperature Behavior of Copper. MTech thesis.

Khan, M S (2008) Studies on Some Aspects of Service Quality Evaluation with Specific Relevance to Indian Service Industries. PhD thesis.

Khandelwal, Samir (2009) Designing a Valveless Micropump. BTech thesis.

Khandey, Umesh (2009) Optimization of Surface Roughness, Material Removal Rate and cutting Tool Flank Wear in Turning Using Extended Taguchi Approach. MTech thesis.

Khuntia, Tanmayee (2022) Processing, Characterization and Flammability Behavior of Coir Fiber/Sirisha Bark Filler Reinforced Hybrid Polymer Composite. PhD thesis.

Kindo, S (2010) Study on Mechanical Behavior of Coir Fiber Reinforced Polymer Matrix Composites. BTech thesis.

Kukkala, Vivekananda (2012) Experimental study and optimization of the machining parameters in ultrasonic vibrationassisted turning (UVT). MTech thesis.

Kulkarni, Prathamesh Ghanashyam (2017) Study of Damping Characteristics in Fiber Reinforced Composite Beams. MTech thesis.

Kumar, Anshuman (2017) Investigations on Machining Aspects of Inconel 718 During Wire Electro-Discharge Machining (WEDM): Experimental and Numerical Analysis. PhD thesis.

Kumar, Anshuman (2012) Modelling of micro wire electro discharge machining in aerospace material. MTech thesis.

Kumar, Gautam (2013) Multi Objective Optimization of Cutting and Geometric parameters in turning operation to Reduce Cutting forces and Surface Roughness. BTech thesis.

Kumar, K Sayan (2013) Experimental investigation of MRR and surface roughness of EN-18 steel in ECM. BTech thesis.

Kumar, Krishna (2017) Experimental Study on Drilling of GFRP and CFRP Composites. MTech thesis.

Kumar, Manoj (2018) Experimental Studies of EDM Performance on TI-6AL-4V Alloy: Effects of Process Factors on Machinability. MTech thesis.

Kumar, Nishant (2011) Optimizing the cutting parameters using taguchi method to reduce the cutting tool vibration. BTech thesis.

Kumar, S (2014) Study on mechanical behaviour of banana fiber reinforced epoxy composites. BTech thesis.

Kumar, V Rakesh (2013) Teaching Learning based Optimization Applied to Mechanical Constrained Design Problems. MTech thesis.

Kumar , A (2014) A study on mechanical behaviour of hair fiber reinforced epoxy composites. BTech thesis.

Kumar Abhishek, . (2012) Turning of polymers: a novel multi-objective approach for parametric optimization. MTech thesis.

Kumari, Shilpi (2015) Study of TiC Coating on different type Steel by Electro Discharge Coating. MTech thesis.

Kundu, Pritam Kumar (2014) Design and fabrication of work holding device for a drilling machine. BTech thesis.

Luha , Shyam Sundar (2015) Study of Effect of Advanced PVD coating on Drilling of Nickel-Based Super Alloy Inconel 825. MTech thesis.

M, Baburaj (2012) CFD Analysis of Flow Pattern in Electrochemical Machining for L-Shaped Tool. MTech thesis.

M, Chaithanya (2007) Processing & Characterization of Nickel-Aluminide Coating on Metal Substrates. MTech thesis.

Madhaw, Sunny (2013) Surface Modification by Electro-Discharge Coating (EDC) with WC-Cu P/M Electrode Tool. BTech thesis.

Mahanand, Tribed Kumar (2015) Differential Evolution Optimization Technique to Design Gear Train System. BTech thesis.

Mahananda, Ranjan (2015) Optimization of Machining Performance Yields during Turning of GFRP Composites: A Grey based Taguchi Approach. BTech thesis.

Mahapatra, Rabindra Narayan (2013) Inventory Models for Manufacturing Process with Reverse Supply Chain. PhD thesis.

Maharana, Ashwini Kumar and Sahoo, Manas Ranjan (2007) Layout Planning with Isles: A Genetic Approach. BTech thesis.

Maharana, Birendra Kumar (2011) Optimization of Process Parameters in Laser Sheet Metal Bending. BTech thesis.

Mahato, Tapas Kumar (2013) Experimental investigation of microdrilling operation of printed circuit board. BTech thesis.

Malhotra, Rishabh (2014) Differential Evolution Optimization Technique To Design
Gear Train System.
BTech thesis.

Mali, Venkat Reddy (2016) Optimization of Machining Performances in CNC Drilling CFRP (Epoxy) Composites. MTech thesis.

Mallick, S (2014) Study on pulsed Nd:YAG laser butt welding of high carbon steel. BTech thesis.

Mallick, Umasankar (2009) Estimation of MRR Using U-Shape Electrode in Electrochemical Machining. MTech thesis.

Mandal, Abhijeet (2015) Gravitational Search Algorithm: A Novel Optimization for Economic Design in Discontinuous Model. BTech thesis.

Mandapati, Ravi Kumar (2017) Influence of PVD AlCrN Coating and Surface Treatments on Characteristics and Performance of Cutting Tools during Machining of Incoloy 825. MTech thesis.

Mansaram, Mahajan Vaibhav (2018) Experimental Study on Dimensional Accuracy of FDM Build Part. MTech thesis.

Mazumdar, Avijit (2009) Application of Multi-Criteria Decision Making (MCDM) Approached on Teachers' Performance Evaluation and Appraisal. BTech thesis.

Md., Riazuddin (2017) Optimization of Process Parameters in Wire Electro Discharge Machining during Taper Cutting of Inconel 625. MTech thesis.

Meena, Aniruddha (2010) Tensile test of aluminium at high temperature. BTech thesis.

Meher, Anil (2009) ECM Process Characteristics. BTech thesis.

Minj, Amit Prem Prakash (2014) Green supply chain performance assessment: exploration fuzzy logic to tackle linguistic evaluation information. BTech thesis.

Mishra, Ashutosh (2012) Modelling Of Micro Wire-EDM. BTech thesis.

Mishra, Dileep Kumar (2017) Experimental Investigation on Through Hole making by Electro-Discharge Machining (EDM) of Inconel 625 Super Alloy Using Hollow Copper Tool Electrode. MTech thesis.

Mishra, Diptatej (2014) A Fuzzy Based Decision Making Approach for Selecting and Evaluating Green Suppliers. BTech thesis.

Mishra, Kaushik (2011) Scheduling of automated guided vehicles in a FMS Environment using particle swarm optimization. BTech thesis.

Mishra, Punyapriya (2011) Development and Characterization of Low Cost Composite from Sugarcane Bagasse Waste. PhD thesis.

Mishra, Punyapriya (2007) Effect of environment on mechanical properties of bagasse fiber reinforced polymer composite. MTech thesis.

Mishra, Purushottam (2015) Multi-Objective Optimization in Electro Discharge Machining of Al/B4c Metal Matrix Composites. MTech thesis.

Mishra, Shankar (2007) Estimation of power generation potential of nonwoody biomass species. MTech thesis.

Mishra, Srimant Kumar (2012) PROCESSING, CHARACTERIZATION AND EROSION WEAR RESPONSE OF PARTICULATE FILLED ZA-27 METAL MATRIX COMPOSITES. MTech by Research thesis.

Mishra, Subrat (2014) Combined loose piece pattern for a complex job. BTech thesis.

Mishra, Swayam (2016) A Study On Parametric Appraisal of Fused Deposition Modelling (FDM) Process. PhD thesis.

Mishra, Tanmaya (2011) Machine Loading in Flexible Manufacturing system using Artificial Immune algorithm. BTech thesis.

Mishra, Vivek (2014) Physical, mechanical and abrasive wear behaviour of jute fiber reinforced polymer composites. PhD thesis.

Mohan, P (2014) Study the effects of welding parameters on TIG welding of aluminium plate. MTech thesis.

Mohanta, Dillip (2012) A combined PCA and ANN approach for prediction of multiple responses in turning of AISI 1020 steel. MTech thesis.

Mohanta , Manoj Kumar (2013) Optimization of Micro Wire Electro Discharge Machining Process Parameters Using Aerospace Material. MTech thesis.

Mohanty, A (2014) Influence of CVD multilayer coating on machinability characteristics of aerospace grade stainless steel. MTech thesis.

Mohanty, Bikash (2012) Use of GRA-Fuzzy and TOPSIS for Multi-Response Optimization in CNC end Milling. BTech thesis.

Mohanty, S K (2014) Thermal energy distribution and optimization of process parameters during electrical discharge machining of AISI D2 steel. BTech thesis.

Mohanty, Suranjan (2014) Modelling of hard turning process. MTech thesis.

Mohapatra, Lopamudra (2018) Characterization & Abrasive Wear Behavior of Bio-fiber Based Carbon Black Reinforced Epoxy Composites. MTech thesis.

Mohapatra, Sambit Kumar (2016) Aluminium Based Material Extrusion Through Mathematical Contoured Die: Numerical & Experimental Investigation. PhD thesis.

Moharana, Bikash Ranjan (2017) Mechanical and Metallurgical Investigation of AISI 304 Stainless Steel and Commercially Pure Copper Dissimilar Metal Couple Weldments. PhD thesis.

Moka, Vijay Krishna (2012) Estimation of calorific value of biomass from its elementary components by regression analysis. BTech thesis.

Mondal, Arpan Kumar (2011) An investigation on characterization of bio-composites. MTech thesis.

Mukhopadhyay, Akash (2015) Experimental Investigations and Optimization of the Machinability Aspects of AISI 4340 Alloy Steel Using Uncoated Carbide and Coated Cermet Inserts in Dry Hard Turning. MTech thesis.

Murmu, Mithun (2009) Three Dimensional Analysis of Extrusion through Taper Die. MTech thesis.

Nageendrababu, Kona (2015) Development of Arrayed Structures Using Reverse EDM (R-EDM). MTech thesis.

Nahak, Nibedit (2015) Design of Fish Descaling Machine. BTech thesis.

Nahak, Rajat Kumar (2014) Conceptual design of casting patter. BTech thesis.

Naik, Saroj Kumar (2013) Study the Effect of Compact Pressure of P/M Tool Electrode on Electro Discharge Coating (EDC) Process. BTech thesis.

Nathan, Senthil (2011) Service Quality in Power Sector. BTech thesis.

Nayak, Anshul Abhijit (2015) Modelling, Simulation and Experimental Investigation for Generating ‘I’ Shaped Contour Using Electro Chemical Machining. BTech thesis.

Nayak, B (2014) Multi-response optimization in machining: exploration of TOPSIS and Deng’s similarity based approach. MTech thesis.

Nayak, Kanhu Charan (2013) Three Dimensional Analysis of Combined Extrusion-forging Process. MTech thesis.

Nayak, Prashit Kumar (2016) Modelling and Experimental Investigation of HASTELLOY C-276 Using Electro Discharge Machining (Edm). MTech thesis.

Nayak, Sarthak (2011) Study of chip breaker on turning of stainless steel. BTech thesis.

Nayak, Shweta and Mishra, Swetaleena (2007) Effects of addendum modification on root stress in involute spur gears. BTech thesis.

Nayak , Praveen Kumar (2018) Effect of Process Parameters on the Mechanical Behaviour of FDM and DMLSBuild Parts: an Experimental Investigation. MTech thesis.

Nayak , S K (2014) Comparative study of machinability characteristics during machining nimonic c-263 with uncoated and cvd multicoated carbide inserts. BTech thesis.

Nigam, Shrutee (2017) Copper Deposition on RP Parts: An Experimental Investigation. PhD thesis.

Nitesh, . (2016) Effect of Pulsed Current for Autogenous TIG Welding of AISI 304 Stainless Steel. MTech thesis.

Pachalasiya, Mahendra Singh (2013) Modeling of extrusion through curve die. MTech thesis.

Padaseti, Bijaya Kumar (2018) Experimental and Numerical Investigation on the Key Machinability Measures of Hastelloy C276 During Wire-EDM Operation. MTech thesis.

Padhee, Chinmaya Kumar (2018) Microstructure Evolution and Mechanical Performance of W-Niti Composite Coating Produced on Ti-6Al-4V Titanium Alloy by TIG Cladding Method. MTech thesis.

Padhy, Durga Madhab (2011) A case study on Application of FUZZY logic in Electrical Discharge Machining(EDM). BTech thesis.

Padhy, Jukti Prasad (2013) Design and Fabrication of Abrasive Jet Machine. MTech thesis.

Pal , Ansuman Dutta (2015) Modelling of Abrasive Flow Machining. BTech thesis.

Panda, Manas Ranjan (2015) A Numerical and Experimental Approach to Study the Parametric Effect of Ultrasonic Welding. MTech thesis.

Panda, Ojaswi (2012) A Study on the Effect of Fiber Parameters on the Mechanical Behavior of Bamboo-Glass Fiber Reinforced Epoxy Based Hybrid Composites. BTech thesis.

Pandey, Ashitosh (2010) Laser welding of dissimilar material. BTech thesis.

Pandey, Krishna Kant (2020) Intelligent Trajectory Planning and Navigational Analysis of Wheeled Mobile Robot in Cluttered Workspace. PhD thesis.

Pandey, Prashant (2015) Multi-Objective Optimization in Electro Discharge Machining of Al/Al2O3 Metal Matrix Composite. MTech thesis.

Panigrahi, Soumya (2014) Fuzzy-TOPSIS for Appropriate Site Selection for Establishing a Thermal Power Plant. BTech thesis.

Panigrahi, Sudhir Kumar (2012) Damping of composite material structures with bolted joints. BTech thesis.

Panwariya, Chirag (2016) Evaluation of Nitride Layer on Ti-6Al-4V Titanium Alloy by Tungsten Inert Gas (TIG) Nitriding Method. MTech thesis.

Parida, Pravas Janmejay (2015) Design of Mechanical Device to Transfer a Seriously Ill Person to the Operation Theater. BTech thesis.

Parijat, Kumar (2015) Multi-Objective Optimization in Machining (Turning) of Aluminium. BTech thesis.

Patel, Bhanupratap (2017) An Experimental Investigation of Ultrasonic Spot Welded Dissimilar Joint of 304SS to Al3003 With Interlayer. MTech thesis.

Patel, Debabrata (2009) Economic Design of Control Chart. BTech thesis.

Patel, N K (2014) Parametric optimization of process parameters for EDM of stainless steel 304. MTech thesis.

Patel, Nirmal (2013) A Comparative Analysis of TOPSIS & VIKOR Methods in the Selection of Industrial Robots. BTech thesis.

Pathak, Rohit (2009) Multi Objective Optimization using Grey Taguchi Method. BTech thesis.

Patnaik, Amar (2008) Development, Characterization and Solid Particle Erosion Response of Polyester based Hybrid Composites. PhD thesis.

Patnaik, Prabina Kumar (2018) Processing, Characterization and Slurry Abrasion Wear Behaviour of Needle-Punched Nonwoven Fabric Reinforced Polymer Composites. PhD thesis.

Patnaik, Sibasish and Sachdev, Ankur (2009) Design and Development of Micro Turbine. BTech thesis.

Patra, Prabir Kumar (2015) Finite Element Simulation of Machining of Inconel 825, a Nickel Based Superalloy. BTech thesis.

Pattanaik, Samarendra (2016) Improvement in Service Life of Skip Car by Using Chromium Carbide Overlay Plate with Special Reference to Rourkela Steel Plant. MTech by Research thesis.

Paul, Binay Kumar (2018) Performance of Additive Mixed Electro-Discharge Machining of Inconel 718 Super Alloys. MTech thesis.

Poddar, Ayush (2012) Experimental investigation of MRR, surface roughness and overcut of AISI 304 stainless steel in EDM. BTech thesis.

Pradhan, Bidhan Kumar (2009) Service Quality Indicators in Education Setting:Application of RIDIT Method to Likert Scale Surveys. BTech thesis.

Pradhan, Krushna Prasad (2009) Design and Fabrication of Abrasive Jet Machine. BTech thesis.

Pradhan, Mohan Kumar (2010) Experimental Investigation and Modelling of Surface Integrity, Accuracy and Productivity Aspects in EDM of AISI D2 Steel. PhD thesis.

Pradhan, Protsahan (2013) Comparative study of different adsorbent materials in a charcoal canister. BTech thesis.

Pradhan, Ranbir Pratik and Shivadas, Patil Gagan (2015) Design and Development of Automated Filler Rod Feeding System for TIG Welding. BTech thesis.

Pradhan, Satya Prakash (2012) An investigation into the friction stir welding of aluminium pipe with stainless steel plate. BTech thesis.

Pradhan, Subhrajit (2022) Mechanical and Tribological Behaviour of Natural Fiber (Eulaliopsis Binata) Reinforced Polymer Composite. PhD thesis.

Pradhan , Dilip Kumar (2016) Improvement of Surface Finish in Boring Operation Using Composite Material. MTech thesis.

Praharaj, Ami t Kumar (2018) Simulation of Electrolyte Flow Pattern and Variation of MRR With Machining Variables in ECM for L-shaped Tool using CFD. MTech thesis.

Prasad, Gourav (2016) FE Modelling of EDM Process. MTech thesis.

Priyadarshini, Amrita (2007) A study of the effect of cryogenic treatment on the performance of high speed steel tools and carbide inserts. MTech thesis.

Puhan, Debaprasanna (2012) Non-conventional machining of Al/Sic metal matrix composite. MTech thesis.

Rajan, Rohit (2012) Performance Analysis of Synthetic Control Chart. BTech thesis.

Ramana , Kukarasi (2018) Development of Cryogenic Helium Turboexpander. MTech thesis.

Ranjan, R (2014) Surface modification by Electro-Discharge Coating (EDC) with Tic-Cu P/M electrode tool. BTech thesis.

Ranjan, Rahul (2012) Application of DEA in the Taguchi Method for
Multi-Response Optimization.
BTech thesis.

Rath, Usharani (2013) Two phase flow analysis in electrochemical machining for L-shaped Tool: A CFD approach. MTech thesis.

Richhariya, Vipin (2013) Surface Modification of AISI 1020 Mild Steel by Electrical Discharge Coating with Tungsten and Copper Mixed Powder Green Compact Electrodes. MTech thesis.

Rout, Matruprasad (2011) Flow stress and barreling behavior of aluminum alloy during upset forging at elevated temperature. MTech thesis.

Rout, Sarbeswar (2013) Parametric Optimization of Turning Operation on Stainless Steel Using a Carbide Tool. BTech thesis.

Roy, Abhijit (2014) Economic Design of X-bar Chart Using Genetic Algorithm. MTech thesis.

Roy, Kanchan (2018) Study of Damping in Epoxy-Al2O3/Glass Composite Beams. MTech thesis.

Roymohapatra, Debasis (2009) Part Feeding System for FMS. BTech thesis.

S , Sujaykhosh (2018) Effect of Silicon Carbide as Filler Reinforcement on the Damping properties of Glass-Fibre Epoxy Composites. MTech thesis.

Saha, Saurav (2011) A study on effect of fiber parameters on mechanical behavior of natural fiber based polymer composites. BTech thesis.

Sahay, Suyash (2012) A Study on the Effect of Chemical Treatment on the Mechanical Behavior of Bamboo-Glass Fiber Reinforced Epoxy Based Hybrid Composites. BTech thesis.

Sahoo, Ajitesh (2015) Study on Ultrasonic Welding of Aluminimum Sheets. BTech thesis.

Sahoo, Alok Kumar (2011) Dry Sliding Wear Response of Fly Ash Filled Poly-Ether-Ether-Ketone Composites. BTech thesis.

Sahoo, Binay Kumar (2013) Obtain makespan of job shop scheduling operation. BTech thesis.

Sahoo, Biranchi Narayan (2011) Effect of Cryogenic Treatment of Cemented Carbide Inserts on Properties & Performance Evaluation in Machining of Stainless Steel. MTech thesis.

Sahoo, Chinmaya Kumar (2017) Development of TiC Based Wear Resistance Composite Coating on AISI 304 Steel by Pulsed Laser and TIG Cladding Process. PhD thesis.

Sahoo, Pradeepta Kumar (2012) Design and development of a concentric driven serial chain manipulator. BTech thesis.

Sahoo, Ranjan and Samantaray, Pinaki (2007) Study of friction welding. BTech thesis.

Sahoo, Sujit Kumar (2012) Welding of stainless steel with pure copper by Nd:YAG laser, optimizing the tensile strength. BTech thesis.

Sahoo, Sushanta Kumar (2016) Environmental Friendly Electroless Copper Metallization on FDM Build ABS Parts. MTech thesis.

Sahoo , Smrutiranjan (2011) Prediction of machining parameters for optimum Surface Roughness in turning SS 304. BTech thesis.

Sahu, Anoop Kumar (2015) Supply Chain Performance Appraisement and Benchmarking for Manufacturing Industries: Emphasis on Traditional, Green, Flexible and Resilient Supply Chain along with Supplier Selection. PhD thesis.

Sahu, Anshuman Kumar (2021) Performance Assessment of Rapid Tool Electrodes During Electrical Discharge Machining of Titanium and Its Alloy. PhD thesis.

Sahu, Atul Kumar (2009) Efficient Heuristics for Scheduling Tasks on a Flo Shop Environment to Optimize Makespan. MTech thesis.

Sahu, Bighnesh Kumar (2017) Electro-Discharge Machining of Super Alloy Inconel 718: Emphasis on Material Removal Efficiency and Surface Integrity of the End Product. MTech thesis.

Sahu, Binaya Kumar (2015) Experimental Investigation of Turning of Austenitic Steel. BTech thesis.

Sahu, J K (2014) TiB2-TiC-Al2O3 coating on Aluminium substrate by in-situ laser coating process using pulsed Nd: YAG laser. MTech thesis.

Sahu, Jambeswar (2012) An intelligent approach for multi-response optimization: a case study of non-traditional machining process. MTech thesis.

Sahu, Madhusmita (2018) Performance of Used Transformer Oil as Dielectric Media During EDM of Inconel 718 Super Alloys. MTech thesis.

Sahu, Pankaj (2015) Experimental Investigation and Optimization of Parameters in Electrochemical Machining Operation. MTech thesis.

Sahu, Ranjeet Kumar (2011) An investigation on dimensional accuracy of fused deposition modeling (FDM) processed parts using fuzzy logic. MTech thesis.

Sahu, Santosh Kumar (2014) Development of decision support systems towards supply chain performance appraisement. MTech by Research thesis.

Sahu, Shiba Narayan (2012) Neural Network Modelling and Multi-Objective
Optimization of EDM Process.
MTech thesis.

Sahu, Suraj Kant (2013) Agility Evaluation in Fuzzy Environment. BTech thesis.

Sahu, Sushanta Kumar (2009) An appraisal of Characteristic Mechanical Properties of Aluminium 6061 alloy – Silicon Carbide (SiCp) Metal Matrix Composite (MMC) exposed to different thermal conditions. MTech thesis.

Sahu , Sharwan Kumar (2015) Drilling of Glass Fiber Reinforced Polymer (GFRP) Composites: Multi Response Optimization Using Grey Relation Analysis with Taguchi’s Method. MTech thesis.

Sahu , Supriya (2012) Performance evaluation of uncoated and multi layer TiN coated carbide tool in hard turning. MTech thesis.

Samal, C (2014) Study of process parameters towards improving efficiency of closed die hot forging process. MTech thesis.

Samal, Sumit Kumar (2009) Study of Parameters of Ultrasonic Machining. BTech thesis.

Samant, Abhijit (2016) An Experimental Investigation in Hard Turning of AISI 4140 Steel. MTech thesis.

Samantaray, Sambeet (2015) Experimental Analysis on Surface Roughness of En-24 Hardened Steel. BTech thesis.

Samantra, Chitrasen (2012) Decision-making in fuzzy environment. MTech thesis.

Sarangi, Sangita (2011) Optimization of Robot Motion Planning using Ant Colony
Optimization.
MTech thesis.

Sarma, Sushanta (2011) Parametric optimization of turning operation on stainless steel using a carbide tool. BTech thesis.

Satpathy, Mantra Prasad (2017) Ultrasonic Spot Welding of Dissimilar Metal Sheets: An Experimental, Numerical and Metallurgical Investigation. PhD thesis.

Sethy, Soumya Ranjan (2011) A Study on Mechanical Behavior of Surface Modified Natural Fiber Based Polymer Composites. BTech thesis.

Sha, Bibhu Bhusan (2018) Numerical and experimental investigation of common header pulsating heat pipe. MTech thesis.

Shah, Prakash (2013) A Fuzzy Based Service Quality and Performance Evaluation Model: A Case Study in Hostel Mess. BTech thesis.

Sharma, Rahul (2017) Drilling of Inconel Superalloy: A Numerical Modelling. MTech thesis.

Sharma, Santosh Kumar (2019) Studies on Some Aspects of Implementation of Reverse Logistics in Indian Context. PhD thesis.

Singh, A (2014) Processing, characterization and sliding wear behavior of functionalized carbon nanotube reinforced epoxy matrix composite. MTech thesis.

Singh, Abhishek (2014) Effect of pre and post mechanical treatment on pvd coated tools' characteristics and machining performance. MTech thesis.

Singh, Ankita (2012) Studies on some aspects of composite machining. MTech by Research thesis.

Singh, Ashish (2015) Design, Analysis and Fabrication of a Reconfigurable Stair Climbing Robot. MTech thesis.

Singh, Kalebar (2016) A Predictive System for Blast Furnace Cooling Stave Using Heat Transfer Model and Neural Network. MTech thesis.

Singh, Mahendra (2016) Effect of Cutting Parameters and Cutting Environment on Surface Integrity During Machining of Nimonic C-263. MTech thesis.

Singh, Sandeep Kumar (2013) Simulation of R.F window Brazing process: Thermal-Structural analysis of ceramic to metal vacuum brazing joints. MTech thesis.

Singh, Subhajit (2018) Surface Roughness Estimation of FDM and DMLS Build Parts. MTech thesis.

Singh, Vivek (2012) Analysis of process parameters of plasma arc cutting using design of experiment. MTech thesis.

Singh , Abhishek (2015) Drilling of Glass Fiber Reinforced Polymer (GFRP) Composites: Parametric Appraisal and Multi Response Optimization. MTech thesis.

Sinha, Saikat and Patel, Bimal (2007) Solid particle erosion of jute fibre reinforced red-mud filled epoxy resin composite. BTech thesis.

Soni, Lalit (2015) TiC Coating on AISI 304 Stainless Steel by Tungsten Inert Gas (TIG) Cladding Using Preplaced Powder. MTech thesis.

Sonkar, V (2014) Multi-objective optimization in machining of GFRP and MMC composites: two case experimental research. MTech thesis.

Soreng, Ajit (2011) Performance of multilayer coated tool in dry machining of AISI 316 austenitic stainless steel. BTech thesis.

Srikanth, Rupavath (2016) Experimental and Numerical Analysis of Free Vibration and Dynamic Behaviour of Laminated Composite Shallow Shell under Hygrothermal Condition. MTech thesis.

Sriramka, Irshant (2012) Scheduling of Flexible Manufacturing Systems using Genetic Algorithm. BTech thesis.

Subudhi , Ashutosh (2014) Modelling of residual stress as a function of temperature in EDM. BTech thesis.

Sudhakarapandian, R (2007) Application of Soft Computing Techniques for Cell Formation Considering Operational Time and Sequence. PhD thesis.

Sudheepth, K (2015) Optimization of Machining Performance during the Turning of GFRP Composites:Topsis Based Taguchi Method. BTech thesis.

Suniya, Naveen Kumar (2013) Analusis and Modeling of Flexible Manufacturing System. MTech thesis.

Sutar, R (2014) Multi objective optimization of cutting parameters in turning operation using Taguchi method. BTech thesis.

Swain, Ashirbad (2018) Viscoelastic Modelling and Dynamic Analysis of CNT-based Composite Shell Panels. PhD thesis.

Swain, D P (2014) Supplier selection in risk consideration: a fuzzy based topsis approach. BTech thesis.

Thejavath, Mangilal (2015) CFD Analysis and Optimization of Process Parameters of Abrasiveflow Machining. MTech thesis.

Thrinadh, Jadam (2017) Experimental Investigation on EDM of Inconel 718 Alloy Using Triangular Cross Sectioned Copper Tool Electrode. MTech thesis.

Tirkey, Nelson (2009) Evaluation of Chip Breaker. BTech thesis.

Tirkey, Nirmal (2017) Investigation of Various Machining Characteristics Of AISI 4340 Hardened Alloy Steel With Different Uncoated Cermet Inserts. MTech thesis.

Tirupataiah, Kasani (2017) Effects of Surface Treatment and PVD ta-C Coated Tool on Properties and Performance Evaluation during Dry Turning of Al 7075-T6 Alloy. MTech thesis.

Tripathy, Anshuman (2013) Machine loading in a flexible manufacturing system. BTech thesis.

Tripathy, Gyanendra (2015) Multi-Objective Optimization in Machining (Turning) Of Brass. BTech thesis.

Tripathy, Lalitendu (2010) Analysis And Prediction Of Plasma Sprayed Alumina-Titania Coating Deposition Using Neural Computation. BTech thesis.

Tripathy, Satyabrata (2015) Characterization and Estimation of Power Generation Potentials Of Some Agricultural Wastes. MTech by Research thesis.

Upadhyay, Avadhesh (2009) Design of a Micropump. BTech thesis.

Upadhyay, Chandramani (2016) An Experimental Investigation Emphasizing Surface Characteristics of Electro-Discharge Machined Inconel 601. MTech thesis.

V, Vinay (2013) Study on Mechanical Behaviour of Surface
treated Coir Fiber Reinforced Polymer Matrix Composites.
BTech thesis.

Vasanth, S.V.A (2012) Economic Design of X-bar Control Chart by Ant Colony Optimization. BTech thesis.

Verma, Akash (2017) Turning of Superalloy- A Numerical Modelling. MTech thesis.

Verma, Neelam Kumar (2013) Experimental Investigation of Process Parameters in Electrochemical Machining. MTech thesis.

Verma, Rajesh Kumar (2012) Fuzzy rule based optimization in machining of glass fiber reinforced polymer (GFRP) composites. MTech thesis.

Vinjamuri, Raviteja (2014) Experimental investigation and 3d analysis of combined extrusion-forging process. MTech thesis.

Vishwakarma, Umesh Kumar (2011) Modelling of Micro Electro Discharge Machining in Aerospace Material. MTech thesis.

Waghmare , Dipak Tanaji (2018) Niti Coating on Ti-6Al-4V Alloy by TIG Cladding Process for Improvement of Wear Resistance: Microstructure Evolution and Mechanical Performances. MTech thesis.

Xess, Prity Aniva (2012) Erosion wear behaviour of bamboo fiber based hybrid composites. MTech thesis.

Yadav, Ritlal Kumar (2013) A study on mechanical behavior of surface modified jute fiber reinforced epoxy composites. BTech thesis.

Yadav, Utkarsh (2011) Multi-criteria decision making approach for vendor selection. BTech thesis.

Yadav , Sushil Kumar (2013) Optimization of green electro-discharge machining using VIKOR. MTech thesis.

Yuva Raju, Bonda Atchuta Ganesh (2015) Experimental Investigation and Numerical Analysis of Combined Extrusion-Forging Process. MTech thesis.

Yuva Raju, Bonda Atchuta Ganesh (2021) Signal Analysis and Chatter Control Studies in Internal Turning Operations. PhD thesis.

This list was generated on Mon Dec 23 08:00:37 2024 IST.