Items where Subject is "Engineering and Technology > Electrical Engineering > Power Electronics"
Group by: Creators | Item Type
Number of items at this level: 130.
Biswas, Rajashree (2013) Active power filter based on interleaved buck converter. MTech thesis.
Fathah, Abdul (2013) Design of a Boost Converter. BTech thesis.
Garain , Gour Sunder (2014) Current Control of Self-Excited Induction Generator using Shunt Active Filter. MTech thesis.
Jain, Suman and Rana, Jyoti Prakash (2013) Design and Simulation of some Controllers for Speed Control of Chopper fed DC Motor. BTech thesis.
Joshi, Mahendra Chandra (2013) Modeling and Control of BidirectionalDC DC Converter Fed PMDC Motor(for HEV Applications). MTech thesis.
Kanth, Chaganti Sarath and Mayor, Tejas Anishwar (2013) Modeling and design of an audio amplifier system. BTech thesis.
Murmu, Ishwar Chandra and Yadav, Laloo Kumar (2013) Low cost automatic water level control for domestic applications. BTech thesis.
Roy, Tulika Dutta (2013) Simulation and Analysis of Photovoltaic Stand-Alone Systems. MTech thesis.
Samantaray, Devadutta and Pattnaik, Debasmita and Sahu, Bonani (2013) Microcontroller based implementation of a fuzzy knowledge based controller. BTech thesis.
Sethy , Badal Kumar and Sinha , Abhishek Kumar (2013) Speed Control of DC Motor Using Chopper. BTech thesis.
Sowmya, Tontepu Naga and Marandi, Debati (2013) Optimal filter design and switching loss reduction in single phase grid connected inverter system. BTech thesis.
Sowmya , Tontepu Naga and Marandi, Debati (2013) Optimal filter design and switching loss reduction in single phase grid connected Inverter system. BTech thesis.
Surykantrao, Shirnewar Gajanan (2013) Digital Pulse Width Modulation Generation Using 8051 for DC DC Buck Converter. MTech thesis.
Agarwal, Pramod Kumar (2013) Modeling & Simulation of High Performance Nanoscale MOSFETs. MTech thesis.
Agrawal, Chirag (2014) Comparative Study and Simulation of Boost Converter and Buck Converter for a Photovoltaic System. BTech thesis.
Agrawal, Chirag (2014) Comparative Study and Simulation of Boost Converter and Buck Converter for a Photovoltaic System. BTech thesis.
Anand, Abhishek and Minz, Avinash (2013) Design of high performance class B push pull amplifier. BTech thesis.
Anurag, Anup (2013) Decoupled control strategy of grid interactive inverter system with optimal LCL filter design. BTech thesis.
Avisek, M.P. and ., Shubham (2013) Study of Input Power Factor Correction in Single Phase AC-DC Circuit Using Parallel Boost Converter. BTech thesis.
Babu, B. Chitti (2012) Study of inverter-interfaced wind power generation system under balanced & unbalanced grid voltage conditions. PhD thesis.
Badi, Manjulata (2012) Power quality improvement using passive shunt filter, TCR and TSC combination. MTech thesis.
Bal, Satarupa (2013) Experimental validation of ZVS boost converter with resonant circuit for low power photovoltaic applications. BTech thesis.
Balachandran, Sanjeev and Hansdah, Sunil and A, Narendra Babu (2007) Study and analysis of three phase multilevel inverter. BTech thesis.
Barik, Sobha Chandra (2007) Sliding mode vector control of three phase induction motor. MTech thesis.
Behera, B (2014) Virtual instrument based maximum power point tracking of a solar panel. MTech thesis.
Behera, Jyoti Ranjan and Barik, Rajesh Kumar (2012) Voltage to Frequency Converter: Modeling and Design. BTech thesis.
Behera, Minakhi (2012) Cascaded Multilevel Inverter Based Transformerless Traction Drive for Railway Applications. MTech thesis.
Behera, Satyasuranjeet and Mohapatra, Sibasis and Bisoi , Monalisa (2007) Automatic power factor correction by microcontroller 8051. BTech thesis.
Behera, Soumya Ranjan and Meher, Thabir Kumar (2013) Design of single ended primary inductor DC-DC converter. BTech thesis.
Bhatia, Amitpal Singh I. S. and Gupta, Vinit Kumar and Sethi, Sourav Anand (2012) Simulation and Speed Control of Induction Motor
Bhatt, Keshav and Pradhan, Om Prakash (2009) Effects of Numerical Oscillation in Switching of Power Transformer Connected To A Power Network. BTech thesis.
Biswal, Mahasweta (2014) A hybrid recursive least square pso based algorithm for harmonic estimation. MTech thesis.
Biswal, Mousumi (2011) Control Techniques for DC-DC Buck Converter with Improved Performance. MTech by Research thesis.
Choudhury, Satish (2011) Performance Analysis of Doubly-fed Induction Generator in Wind Energy Conversion System. MTech thesis.
Das, Debashis and Pradhan, Shishir Kumar (2011) Modeling and simulation of PV array with boost converter : An open loop study. BTech thesis.
Das, Dipak Kumar (2013) Voltage Control of Dc-Dc Buck Converter and its Real Time Implementation Using Microcontroller. MTech thesis.
Das, Dushmanta Kumar (2010) Robustness Improvement by Dynamic State Feedback Stabilization. MTech by Research thesis.
Dash, Amalendu (2014) Direct torque control of switched reluctance motor drives. MTech thesis.
Dash, Malaya Saurava (2009) Synthesis And Electrical Characterisation of Lanthanum Doped Barium Titanate Zirconate. PhD thesis.
Dash, Roma (2011) Power factor correction using parallel boost converter. BTech thesis.
Dash, Rudra Narayan (2010) Fault Diagnosis in Induction Motor Using Soft Computing Techniques. MTech by Research thesis.
Dash, Smruti (2013) A Lyapunov-Function Based Control For A Three-Phase Shunt Hybrid Active Power Filter. MTech thesis.
Dash , Tusar Kumar (2013) Modeling and control of 3-Ф grid connected inverter system for distributed power generation system. MTech thesis.
Deepak, M L and Mishra, A (2014) Speed control of DC motorusing chopper. BTech thesis.
Dushyant , Sharma and Binita , Sen (2012) Grid synchronization algorithm for distributed generation system during grid abnormalities. BTech thesis.
Faizy, A and Kumar, S (2010) DC Motor Control using Chopper. BTech thesis.
G, Venkata RamaKrishna (2007) Torque ripple reduction in direct torque controlled induction motor drive by using fuzzy controller. MTech thesis.
Gedam, Prashant (2014) Design and Implementation of bidirectional DC DC converter fed DC motor. BTech thesis.
Ghosh, Antip and Kandpal, Mayank (2010) State-space average Modeling of DC-DC Converters with parasitic in Discontinuous Conduction Mode (DCM). BTech thesis.
Gunda , Suman and B.V.S , Pavan Kumar and M , Sagar Kumar (2013) Modeling, Analysis and Design of Synchronous Buck Converter Using State Space Averaging Technique for PV Energy System. BTech thesis.
Gupta, Suvra (2014) Fuzzy logic based soft starting of induction motor with current control. MTech thesis.
Gupta , Rahul Kumar (2014) Implementation of Shunt Active Power Filter(SAPF) algorithms. BTech thesis.
Hansdah, Subash and Bharti, Pankaj Kumar (2010) Performance Study of Nano-Scale Transistor with
Harjai, Arjav and Bhardwaj, Abhishek and Sandhibigraha, Mrutyunjaya (2011) Study of Maximum Power Point Tracking (MPPT) Techniques in a Solar Photovoltaic Array. BTech thesis.
J P, Jagannath Prasad Mishra and Paplu, Rutwik Rath (2011) Input Power Factor Correction using Buck Converter in Single Phase AC-DC Circuit. BTech thesis.
Jee, Devraj and Patel, Nikhar (2013) V/f Control of Induction Motor Drive. BTech thesis.
Jena, Swetananda (2012) Performance Improvement of Sensorless Direct
K, Aroul (2009) Development of efficient power supply For low voltage high current Applications. MTech by Research thesis.
Kaarthik, R. Sudharshan and Dalei, Nayan Kumar and Vigneshwaran, R. and Das, Rabinarayan (2010) Modeling, simulation and implementation of low power photovoltaic energy conversion system. BTech thesis.
Kanojiya, Manjeet Vashistha and Banoth, Madhu and Dannana, Santosh (2012) Instantaneous Active and Reactive Current Component Method for Active Filters under Balanced & Unbalanced mains Voltage Conditions for 3-ph 3-wire System. BTech thesis.
Kaur, Kamaljeet (2007) Fuzzy logic based control of variable speed cage wind generation system. MTech thesis.
Kaushik, Gaurav (2014) Compensator Design for DC-DC Buck Converte using Frequency Domain Specifications. MTech thesis.
Kawaduji, Chaudhari Khushal (2013) Discrete-time slip control algorithms for a hybrid electric vehicle. MTech thesis.
Khan, Huma (2012) Improving the Performance of Single Phase Power Factor Correction Circuit using Parallel Boost Converters. BTech thesis.
Kumar, Ch. S and Kumar, G and Bhalotia, A (2010) Design of an Intelligent Power Supply System. BTech thesis.
Kumar, S and Baranwal, V (2010) Speed Control of Separately Excited DC Motor using Neuro Fuzzy Technique. BTech thesis.
Kumar, Shankar and Pattanayak, Byaktiranjan and Singh, Ravi Shankar (2009) Power Electronics: Computer Simulation and Analysis. BTech thesis.
Kumari, D (2014) Optimal LCL filter design for grid-interfaced distributed power generation system. MTech thesis.
Kurma , Sai Mallika (2007) Topological issues in single phase power factor correction. MTech thesis.
Ladwa, Tuljappa M (2010) Fault diagnosis, design and implementation of control circuit for instron fatigue testing machine. BTech thesis.
Mahakhuda, R K (2014) Application of sliding mode controller in DC/AC and DC-DC power converter system. MTech thesis.
Mahapatra, Amrit Anand (2014) Improved braking performance of an electric vehicle by integrating plug braking with regenerative braking. MTech by Research thesis.
Mahapatra, Debabrata (2013) Control System Design of Tilt Rotor Unmanned Aerial Vehicle (UAV). BTech thesis.
Mahapatro, Soumya Ranjan (2014) Control algorithms for a two tank liquid level system: An experimental study. MTech by Research thesis.
Mahesh, Ramavath (2014) Input power factor correction in a single phase AC-DC circuit using parallel boost converter. BTech thesis.
Majhi, Bijoyprakash (2012) "Analysis of Single-Phase SPWM Inverter". BTech thesis.
Majhi, Sudam Charan and Thakur, Prasanta Kumar (2011) Study the effect of input filter for buck converter. BTech thesis.
Mandal, S (2014) Speed control of SVPWM inverter fed BLDC motor drive. MTech thesis.
Meher, Hrushikesh (2013) Performance analysis of interior permanent magnet synchronous motor (IPMSM) drive system using different speed controllers. MTech thesis.
Mikkili, Suresh (2013) Performance Analysis of Type-1 and Type-2 FLC based Shunt Active Filter Control Strategies for Power Quality Improvement. PhD thesis.
Mishra, Anupam and Panda, Sunil and B, Srinivas (2009) Control of Voltage Source Inverters using PWM/SVPWM for Adjustable Speed Drive Applications. BTech thesis.
Mishra, B (2014) Study of power conditioning system of superconducting magnetic energy storage system. MTech thesis.
Mishra, Tanuj (2009) Dynamic Performance Estimation of DFIG Wind Turbine under
Mishra , G (2013) Design of Passive High Pass Filter for Hybrid Active Power Filter Applications. MTech thesis.
mohanty, A and Sahoo, A (2014) Analysis and Simulation of Direct Torque Controlled Induction Motor Drive. BTech thesis.
Mohanty, Mahendra Kumar (2014) Direct torque control of permanent magnet synchronous motor drives with conventional and svm approach. MTech thesis.
Mohanty, P R (2014) Power Factor Correction (PFC) of AC-DC system using boost-converter. MTech thesis.
Mohanty, Piyus and Sahoo, Saransh (2010) Analysis of two level and three level inverters. BTech thesis.
Mohanty, Toshali (2013) Design of a hybrid electric vehicle. BTech thesis.
Mohapatra, B and Jena, A K and Pradhan, K (2010) Modeling and Simulation of a Dynamic Voltage Restorer (DVR). BTech thesis.
Muduli, Mayadhar and Sharma, Ashok Kumar (2014) Dynamic performance Improvement Of SPWM-VSI. BTech thesis.
Panda, Anwesha (2014) Direct Torque Control of Permanent Magnet Synchronous Motor. BTech thesis.
Panda, Biswajeet and Sahoo, Ashirbad (2012) Study of Soft Switching Boost Converter using an Auxiliary Resonant Circuit. BTech thesis.
Panda, Smruti Ranjan (2013) Phase Estimation for Grid Synchronization of DG System Using Cordic Algorithm. BTech thesis.
Panda, Yashobanta (2010) Analysis Of Cascaded Multilevel Inverter Induction Motor Drives. MTech by Research thesis.
Patel, Rupesh (2014) Design and Implementation of an Isolated Solar Photovoltaic Power Generation System. MTech thesis.
Patel, Sanjukta (2014) Modeling and control of a grid connected wind-PV hybrid generation system. MTech thesis.
Pati, Nivedita (2012) Design of robust controllers for dc-dc converters. MTech thesis.
Pati, Swagat (2011) Performance and Power Factor Improvement of Indirect Vector Controlled Cage Induction Generator in Wind Power Application. MTech by Research thesis.
Patra , Nirupama (2013) Study of Induction motor drive with Direct Torque Control scheme and Indirect Field Oriented control scheme with Space Vector Modulation. MTech thesis.
Pattanayak , Suchi Sraba (2013) Development of efficient power supply for microprocessors using zero voltage switching. BTech thesis.
Pattnaik, Swapnajit (2011) Development of Improved Performance Switchmode Converters for Critical Load Applications. PhD thesis.
Pradhan, Kumar Prasannajit (2013) Modeling & Performance Enhancement Analysis of Some Nanoscale MOSFET Structures. MTech by Research thesis.
Pradhan, Parul (2012) Design of resonant circuits based Embedded
Pradhan, Santanu Kumar (2013) Development of New Adaptive Control Strategies for a Two-Link Flexible Manipulator. PhD thesis.
Pradhan, Subarni (2013) Multilevel inverter based electric traction drives. MTech thesis.
Prasad, Bheeshm Narayan (2014) Economic load dispatch in power system using PSO. MTech thesis.
Priyadarshanee, Lipsa (2012) Modeling and control of hybrid ac/dc microgrid. MTech thesis.
Prusty, Smruti (2011) FPGA Based Active Power Filter for Harmonics Mitigation. MTech thesis.
Pujhari, Truptimayee (2009) Islanding Detection in Distributed Generation. MTech thesis.
Ray , Pravat Kumar (2011) Signal Processing and Soft Computing Approaches to Power Signal Frequency and Harmonics Estimation. PhD thesis.
Reddy, B Raghuma (2013) Stability Analysis and Compensator design for Cascaded Converters. MTech thesis.
Roushan, Satish (2014) Inductive power transfer technology for mobile battery charger. BTech thesis.
Rout, Raja (2012) Control of Autonomous Underwater
Sahoo, Nirjharini (2009) Investigation of Power Factor Correction in Single Phase AC-DC Converters. MTech by Research thesis.
Sahu, Gyana Ranjan and Dash, Rohit and Behera , Bimal Prasad (2010) Design and Implementation of ZCS BUCK Converter. BTech thesis.
Sahu, Rakesh Kumar and Mahapatra , Debasish (2013) Comparative study between active and hybrid power filters for power quality enhancement. BTech thesis.
Samajpati, Dipanjan (2014) Distributed Generation Allocation For Power Loss Minimization And Voltage Improvement Of Radial Distribution
Samal, Smruti Ranjan and Dalai, Sanjaya Kumar (2010) Power factor correction in a single phase AC to DC converter. BTech thesis.
Satapathy, A and Nayak, R R (2010) Modelling of Twin Rotor MIMO System (TRMS). BTech thesis.
Satpathy, Saurav (2012) Photovoltaic power control using MPPT and boost converter. BTech thesis.
Siddhant, Kumar (2014) Implementation of fractional open circuit voltage mppt algorithm in a low cost microcontroller. BTech thesis.
Singh, A and Sahoo, H S and Mahala, P S (2014) Modelling, analysis and design of synchronous buck converter using soft switching technique for PV energy system. BTech thesis.
Singh, Praveen Kumar and Arya, Kapil (2010) Control and designing of the DC motor drive using p-i controllers with the help of matlab simulation. BTech thesis.
Singh , Nishant (2013) An improved grid connected PV generation inverter control system. BTech thesis.
Sowjanya, Lakshmi (2014) Improved control strategy of grid interactive inverter system with LCL filter using active and passive damping methods. MTech thesis.
Sriharsha , Ramineni and Ashwin Kumar, M V and Nikhil , Saraogi (2011) Design and implementation of synchronous buck converter based PV energy system for battery charging applications. BTech thesis.
T , Rakesh Krishnan (2012) On Stabilization of Cart-Inverted Pendulum System: An Experimental Study. MTech by Research thesis.
Thakre, Kishor (2009) Dynamic Performance of DFIG under Unbalance Grid Voltage Condition. MTech thesis.
Verma, Vivek Kumar (2014) Practical simulation and modelling of lightning impulse voltage generator using marx circuit. BTech thesis.