Items where Year is 2017

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Number of items: 62.

Agrawal, Shaleka (2017) A Numerical Study of Thin Liquid Film Flow over a Topographically Patterned Rotating Cylinder. MTech by Research thesis.

Arakha, Manoranjan (2017) Effects of Photocatalytic Nanoparticle Interfaces on Biological Membranes and Biomacromolecules. PhD thesis.

Bankoti, Anil Kumar Singh (2017) Creep, tensile and corrosion behaviour of Ca and/or Sb added AZ91 Mg alloys. PhD thesis.

Barik, Sipra (2017) Production of Biodiesel from Food Waste. MTech by Research thesis.

Bhoi, Sourav Kumar (2017) Path Selection based Routing Protocols for Urban Vehicular Ad Hoc Networks. PhD thesis.

Choudhury, Snigdha Bharati (2017) A Study on Adams Completion and Cocompletion. PhD thesis.

Das, Deepa (2017) Intelligent Approaches for Energy-Efficient Resource Allocation in the Cognitive Radio Network. PhD thesis.

Deepika, S (2017) Infrared and Microwave Assisted Hot Air Drying of Lemon (Citrus limon L.). MTech by Research thesis.

Devireddy, Siva Bhaskara Rao (2017) Mechanical, Thermal and Physical Properties of Hybrid Banana-Jute Fibers Reinforced Epoxy and Polyester Composites: Modeling and Experiments. PhD thesis.

Gurrala, Kiran Kumar (2017) Efficient Power Allocation Schemes for Hybrid Decode-Amplify-Forward Relay Based Wireless Cooperative Network. PhD thesis.

Jammu, Bhaskara Rao (2017) Development of FPGA based Standalone Tunable Fuzzy Logic Controllers. PhD thesis.

Jha, Preeti (2017) Two Stage Synthesis of Aromatic Thioethers using Hydrogen Sulfide and Reusable Phase Transfer Catalyst. PhD thesis.

Kar, Swayamsiddha (2017) Investigation of the Epigenetic Regulators and Signaling Pathways influencing Pluripotency Inducing Transcription Factors mediated Tumorigenesis. PhD thesis.

Kashyap, Swarnima (2017) Interface Strengthened Graphene Oxide Reinforced PVA Nanocomposites. PhD thesis.

Kavuri, Naga Chaitanya (2017) Source Apportionment and Forecasting of Aerosol in a Steel City - Case Study of Rourkela. PhD thesis.

Killi, Muralidhar (2017) Development of Efficient MPPT Algorithms with Reduced Number of Sensors for Photovoltaic Systems. PhD thesis.

Kumar, Anshuman (2017) Investigations on Machining Aspects of Inconel 718 During Wire Electro-Discharge Machining (WEDM): Experimental and Numerical Analysis. PhD thesis.

Kumar, Arvind (2017) Preparation and Characterization of Novel Activated Carbons for Adsorption and Adsorption Assisted Biodegradation of Organic and Inorganic Water Pollutants. PhD thesis.

Kumar, Mukesh (2017) Analysis of Microarray Data using Machine Learning Techniques on Scalable Platforms. PhD thesis.

Lohith Kumar, D H (2017) Designing and Characterization of Emulsion-Based Matrices for the Encapsulation of Bioactive Oils using Polysaccharides. PhD thesis.

Maiti, Subrata (2017) Analytical Modelling of Ultra-Wide Band Ground Penetrating Radar for Characterization of Subsurface Media. PhD thesis.

Maji, Kanchan (2017) Gelatin Chitosan And Bioactive Nanoceramic Based Composite Scaffold For Orthopaedic Application. PhD thesis.

Mallick, Arundhati (2017) An Evaluation of Core Inflation Dynamics and Its Impact on Macroeconomic Performance in India. PhD thesis.

Mishra, Himanshu (2017) Modeling and Optimization of Micro-EDM Operation for Fabrication of Micro Holes. PhD thesis.

Mishra, Sasmita (2017) Synthesis and Reactivity of Cyclopentadienyl Based Organometallic Compounds and Their Electrochemical and Biological Properties. PhD thesis.

Mohanty, Satyajit (2017) Development of Maximum Power Extraction Algorithms for PV system With Non-Uniform Solar Irradiances. PhD thesis.

Mondal, Ujjal (2017) Chemoselective Reduction of Nitroarenes using Hydrogen Sulphide under Phase Transfer Catalysis. PhD thesis.

Nayak, Debasish (2017) Novel Techniques for SRAM Based Memory Performance Enhancement. PhD thesis.

Nayak, Nadiya Bihary (2017) Borohydride Synthesis for Development of Porous Zirconium Oxide Nanopowders for Novel Applications. PhD thesis.

Nayak, Priyambada (2017) Synthesis and Characterization of Homovalent and Heterovalent Substituted Strontium Bismuth Titanate Ceramic. PhD thesis.

Panda, Prashanta Kumar (2017) Autophagy Dependent Cell Death, Senescence and Differentiation by Abrus Agglutinin in Cancer Therapeutics. PhD thesis.

Parida, Asit Kumar (2017) Heat Assisted Machining of Nickel Base Alloys: Experimental and Numerical Analysis. PhD thesis.

Patel, Ranjeeta (2017) Interleaved Buck Converter Based Shunt Active Power Filter with Shoot-through Elimination for Power Quality Improvement. PhD thesis.

Pattanaik, Ashutosh (2017) Effect of Processing Conditions on Properties of Fly ash-Epoxy Composite. PhD thesis.

Pradhan, Kumar Prasannajit (2017) Exploration of Novel Attributes of Hybrid FinFETs towards Analog/RF and Reliability Aspects. PhD thesis.

Roy, Satabdi (2017) Chemistry of Transition Metal Complexes with O- and/or N- Donor Ligands: Synthesis, Characterization and Study of Reactivity. PhD thesis.

S., Sivapratha (2017) Development of a Multilayer Emulsion System for the Protection of Polyunsaturated Fatty Acids in Flaxseed Oil. MTech by Research thesis.

Sahani, Pankajini (2017) Fabrication of SiC-B4C–Si and SiC-B4C–Al Cermets by Powder Metallurgy Route. PhD thesis.

Sahoo, Amarendra (2017) Assessment of Impact of Mining on Water Quality and it’s Modelling. MTech thesis.

Sahoo, Chinmaya Kumar (2017) Development of TiC Based Wear Resistance Composite Coating on AISI 304 Steel by Pulsed Laser and TIG Cladding Process. PhD thesis.

Sahoo, Sumanta Kumar (2017) Electrochemically Controlled Synthesis of Few-Layer Graphene Nanosheets and its Evaluation for Applications. PhD thesis.

Sahu, Manoj Kumar (2017) Studies on the utilization of red mud for environmental application. PhD thesis.

Sahu, Om Prakash (2017) Design and Development of Sensor Integrated Robotic Hand. PhD thesis.

Samantaray, Saroj Kumar (2017) Experimental Determination and Prediction of Drag
Coefficient of Newtonian Fluids Flowing Over Solid
and Hollow Objects.
MTech by Research thesis.

Samantarrai, Devyani (2017) Investigating The Microrna-Mediated Target Regulations Associated with Metastasis of Cancer:Special Focus on Soft Tissue Sarcoma and Breast Carcinoma. PhD thesis.

Saramekala, Gopi Krishna (2017) Modeling and Simulation of Subthreshold Characteristics of Short-Channel Fully-Depleted Recessed-Source/Drain SOI MOSFETs. PhD thesis.

Sarath Chandra, K (2017) Processing and Properties Of Polycrystalline Nd:YAG Ceramics. MTech by Research thesis.

Satpathy, Mantra Prasad (2017) Ultrasonic Spot Welding of Dissimilar Metal Sheets: An Experimental, Numerical and Metallurgical Investigation. PhD thesis.

Sen, Dilip Kumar (2017) Analysis of Decision Support Systems of Industrial Relevance: Application Potential of Fuzzy and Grey Set Theories. PhD thesis.

Shaik, Jakeer Hussain (2017) Studies on Design of Spindle-tool System and Their Effects on Overall Milling Process Stability. PhD thesis.

Shama, Shaik (2017) Comparison of Mechanical Properties of Austenitic Ductile Cast Iron with Ferritic/Pearlitic Ductile Cast Iron. MTech by Research thesis.

Sharma, Abhishek (2017) Investigations of a Direct Injection Diesel Engine Run on Non Petroleum Fuel Blends. PhD thesis.

Shaw, Sanu (2017) Mechanical Property Enhancement of PVP-PVA Nanocomposite by Graphene Oxide. MTech thesis.

Singh, Akhilesh Kr. (2017) Study on The Effect of Different Sols on High Alumina Castable Refractory. PhD thesis.

Singh, Bhisham Narayan (2017) Development of Novel Silk Fibroin/Carboxymethyl Cellulose Based Electrospun Nanofibrous Scaffolds for Bone Tissue Engineering Application. PhD thesis.

Singh, Mangal (2017) On PAPR Reduction of OFDM using Partial Transmit Sequence with Intelligent Optimization Algorithms. PhD thesis.

Sinha, Niharika (2017) Mechanism of Tumor Inhibitory Potential of Abrus Agglutinin in Oral Squamous Cell Carcinoma. PhD thesis.

Sourav, Suman (2017) Fluoride Pollution and its Control in Mining Areas. MTech thesis.

Tiwari, Navneet (2017) Preparation and Characterization of Hydroxyapatite-Alumina-Zirconia Composite. MTech thesis.

Tripathy, Abinash (2017) Sentiment Analysis Using Machine Learning Techniques. PhD thesis.

Tudu, Kapura (2017) Experimental Studies of a Direct Injection Diesel Engine Fuelled with Light Fraction Pyrolysis Oil-Diesel Blend. PhD thesis.

Vishwanath, Varshini (2017) Development of Silk Fibroin/Chitosan Based Porous Scaffolds for Cartilage Tissue Engineering. PhD thesis.

This list was generated on Mon Sep 18 21:04:15 2017 IST.