Items where Year is 2017
Jump to: Thesis
Number of items: 95.
Agrawal, Shaleka (2017) A Numerical Study of Thin Liquid Film Flow over a Topographically Patterned Rotating Cylinder. MTech by Research thesis.
Arakha, Manoranjan (2017) Effects of Photocatalytic Nanoparticle Interfaces on Biological Membranes and Biomacromolecules. PhD thesis.
Atta, Debabrata (2017) Development of Robust Control Strategies for Autonomous Underwater Vehicles. PhD thesis.
Bankoti, Anil Kumar Singh (2017) Creep, tensile and corrosion behaviour of Ca and/or Sb added AZ91 Mg alloys. PhD thesis.
Barik, Sipra (2017) Production of Biodiesel from Food Waste. MTech by Research thesis.
Bendu, Harisankar (2017) Experimental and Numerical Analysis of Ethanol Fueled HCCI Engine. PhD thesis.
Bhoi, Sourav Kumar (2017) Path Selection based Routing Protocols for Urban Vehicular Ad Hoc Networks. PhD thesis.
Boddula, Rajamouli (2017) Luminescent EuIII complexes based on phenanthro-imidazole ligands for white LEDs/OLEDs and temperature sensors: Combined experimental and theoretical investigations. PhD thesis.
Choudhury, Snigdha Bharati (2017) A Study on Adams Completion and Cocompletion. PhD thesis.
Das, Deepa (2017) Intelligent Approaches for Energy-Efficient Resource Allocation in the Cognitive Radio Network. PhD thesis.
Dash, Sagarika and S., Srimeenakshi (2017) Cloning and Co-Expression of hG-CSF and hSCF in E.coli. MTech thesis.
Deepika, S (2017) Infrared and Microwave Assisted Hot Air Drying of Lemon (Citrus limon L.). MTech by Research thesis.
Devireddy, Siva Bhaskara Rao (2017) Mechanical, Thermal and Physical Properties of Hybrid Banana-Jute Fibers Reinforced Epoxy and Polyester Composites: Modeling and Experiments. PhD thesis.
Gaur, Deepanjali (2017) Synthesis and Characterization of Giant Plasma Membrane Vesicles and its Effect on Human Mesenchymal Stem Cells. MTech thesis.
Gupta P, Rama Krishna (2017) Impact of Human Resource Development Interventions on Organizational Effectiveness: A Study on Indian Cement Industry. PhD thesis.
Gurrala, Kiran Kumar (2017) Efficient Power Allocation Schemes for Hybrid Decode-Amplify-Forward Relay Based Wireless Cooperative Network. PhD thesis.
Jammu, Bhaskara Rao (2017) Development of FPGA based Standalone Tunable Fuzzy Logic Controllers. PhD thesis.
Jha, Preeti (2017) Two Stage Synthesis of Aromatic Thioethers using Hydrogen Sulfide and Reusable Phase Transfer Catalyst. PhD thesis.
Kar, Swayamsiddha (2017) Investigation of the Epigenetic Regulators and Signaling Pathways influencing Pluripotency Inducing Transcription Factors mediated Tumorigenesis. PhD thesis.
Karmakar, Srijeeb (2017) Studies on Effect of Proline Capped Gold Nanoparticles on Hen Egg White Lysozyme (HEWL) and Cytochrome C (Cyt C) Amyloidogenesis. MTech thesis.
Kashyap, Swarnima (2017) Interface Strengthened Graphene Oxide Reinforced PVA Nanocomposites. PhD thesis.
Kaur, Tejinder (2017) Development of carbon reinforced polymer-ceramic composites for bone tissue engineering. PhD thesis.
Kavuri, Naga Chaitanya (2017) Source Apportionment and Forecasting of Aerosol in a Steel City - Case Study of Rourkela. PhD thesis.
Killi, Muralidhar (2017) Development of Efficient MPPT Algorithms with Reduced Number of Sensors for Photovoltaic Systems. PhD thesis.
Kishore, M. L. Pavan (2017) Hydrodynamic Design Structural Analysis and Optimization of Marine Propeller Blade. PhD thesis.
Kumar, Anshuman (2017) Investigations on Machining Aspects of Inconel 718 During Wire Electro-Discharge Machining (WEDM): Experimental and Numerical Analysis. PhD thesis.
Kumar, Brijesh (2017) Uncertainties in the Hydrological Modelling Using Remote Sensing Data over the Himalayan Region. PhD thesis.
Kumar, Mukesh (2017) Analysis of Microarray Data using Machine Learning Techniques on Scalable Platforms. PhD thesis.
Kumari, Namrata (2017) Exploiting Local Algal Diversity for Bio-Diesel Production. PhD thesis.
Lata, Sujata (2017) Studies on removal of malachite green dye from aqueous solution using plant based biosorbents. MTech thesis.
Lohith Kumar, D H (2017) Designing and Characterization of Emulsion-Based Matrices for the Encapsulation of Bioactive Oils using Polysaccharides. PhD thesis.
Maiti, Subrata (2017) Analytical Modelling of Ultra-Wide Band Ground Penetrating Radar for Characterization of Subsurface Media. PhD thesis.
Maji, Kanchan (2017) Gelatin Chitosan And Bioactive Nanoceramic Based Composite Scaffold For Orthopaedic Application. PhD thesis.
Mallick, Arundhati (2017) An Evaluation of Core Inflation Dynamics and Its Impact on Macroeconomic Performance in India. PhD thesis.
Mehar, Amit Kumar (2017) Development, Characterization of Mechanical Properties, Wear behaviour and Machining Analysis of Ceramic Composites for Bio-Medical Applications. PhD thesis.
Mishra, Himanshu (2017) Modeling and Optimization of Micro-EDM Operation for Fabrication of Micro Holes. PhD thesis.
Mishra, Sasmita (2017) Synthesis and Reactivity of Cyclopentadienyl Based Organometallic Compounds and Their Electrochemical and Biological Properties. PhD thesis.
Mishra, Soumya (2017) Performance Analysis of Photovoltaic Fed Distributed Static Compensator for Power Quality Improvement. PhD thesis.
Mishra, Sourav (2017) Development of PEC-clay nanocomposite for hemorrhage
Mohammed, Noor (2017) Mathematical Model for Enhanced Production of Bacoside Using Batch Cultivation for Bacopa monnieri. MTech thesis.
Mohanty, Satyajit (2017) Development of Maximum Power Extraction Algorithms for PV system With Non-Uniform Solar Irradiances. PhD thesis.
Moharkar, Sharayu (2017) Production and statistical optimization of culture condition for Nattokinase from Bacillus subtilis MTCC 2616. MTech thesis.
Mondal, Ujjal (2017) Chemoselective Reduction of Nitroarenes using Hydrogen Sulphide under Phase Transfer Catalysis. PhD thesis.
Nayak, Debasish (2017) Novel Techniques for SRAM Based Memory Performance Enhancement. PhD thesis.
Nayak, Nadiya Bihary (2017) Borohydride Synthesis for Development of Porous Zirconium Oxide Nanopowders for Novel Applications. PhD thesis.
Nayak, Priyambada (2017) Synthesis and Characterization of Homovalent and Heterovalent Substituted Strontium Bismuth Titanate Ceramic. PhD thesis.
P., Saranya (2017) Development of nanoparticle-polymer based composite films
Panda, Prashanta Kumar (2017) Autophagy Dependent Cell Death, Senescence and Differentiation by Abrus Agglutinin in Cancer Therapeutics. PhD thesis.
Panda, Sukanya (2017) Effects of Organizational Capabilities on Organizational Performance: Empirical Evidences from Indian Banking Industry. PhD thesis.
Parida, Asit Kumar (2017) Heat Assisted Machining of Nickel Base Alloys: Experimental and Numerical Analysis. PhD thesis.
Patel, Ranjeeta (2017) Interleaved Buck Converter Based Shunt Active Power Filter with Shoot-through Elimination for Power Quality Improvement. PhD thesis.
Patnaik, Pratyush Kumar (2017) Designing of Optical Devices for Biomedical Applications: A
Pattanaik, Ashutosh (2017) Effect of Processing Conditions on Properties of Fly ash-Epoxy Composite. PhD thesis.
Paul, Debadrita (2017) Immunomodulation Using Micro-bead System for Chronic Wound Healing. MTech thesis.
Pradhan, Kumar Prasannajit (2017) Exploration of Novel Attributes of Hybrid FinFETs towards Analog/RF and Reliability Aspects. PhD thesis.
Rahul, (2017) Experimental Studies on Machinability of Inconel Super Alloy during Electro-Discharge Machining: Emphasis on Surface Integrity and Metallurgical Characteristics of the EDMed Work Surface. PhD thesis.
Ramajayam, Krishna Kumar (2017) An Approach to Improving Efficacy of Cryosurgery: Numerical and Experimental (Using Gel Phantoms) Studies. PhD thesis.
Roy, Satabdi (2017) Chemistry of Transition Metal Complexes with O- and/or N- Donor Ligands: Synthesis, Characterization and Study of Reactivity. PhD thesis.
S., Sivapratha (2017) Development of a Multilayer Emulsion System for the Protection of Polyunsaturated Fatty Acids in Flaxseed Oil. MTech by Research thesis.
Sahani, Pankajini (2017) Fabrication of SiC-B4C–Si and SiC-B4C–Al Cermets by Powder Metallurgy Route. PhD thesis.
Sahoo, Amarendra (2017) Assessment of Impact of Mining on Water Quality and it’s Modelling. MTech thesis.
Sahoo, Chinmaya Kumar (2017) Development of TiC Based Wear Resistance Composite Coating on AISI 304 Steel by Pulsed Laser and TIG Cladding Process. PhD thesis.
Sahoo, Deepti Moyi (2017) Interval and Fuzzy Computing in Neural Network for System Identification Problems. PhD thesis.
Sahoo, Sumanta Kumar (2017) Electrochemically Controlled Synthesis of Few-Layer Graphene Nanosheets and its Evaluation for Applications. PhD thesis.
Sahu, Manoj Kumar (2017) Studies on the utilization of red mud for environmental application. PhD thesis.
Sahu, Om Prakash (2017) Design and Development of Sensor Integrated Robotic Hand. PhD thesis.
Sakhare, Gaurav Mohan (2017) Determining Predictability of Human Gait Parameters. MTech thesis.
Samal, Padarbinda (2017) Planning of Unbalanced Radial Distribution Systems with Reactive and Distributed Energy Sources Using Evolutionary Computing Techniques. PhD thesis.
Samantaray, Saroj Kumar (2017) Experimental Determination and Prediction of Drag
Samantarrai, Devyani (2017) Investigating The Microrna-Mediated Target Regulations Associated with Metastasis of Cancer:Special Focus on Soft Tissue Sarcoma and Breast Carcinoma. PhD thesis.
Sanam, Joseph (2017) Planning and Operation of DSTATCOM in Electrical Distribution Systems. PhD thesis.
Saramekala, Gopi Krishna (2017) Modeling and Simulation of Subthreshold Characteristics of Short-Channel Fully-Depleted Recessed-Source/Drain SOI MOSFETs. PhD thesis.
Sarath Chandra, K (2017) Processing and Properties Of Polycrystalline Nd:YAG Ceramics. MTech by Research thesis.
Satpathy, Mantra Prasad (2017) Ultrasonic Spot Welding of Dissimilar Metal Sheets: An Experimental, Numerical and Metallurgical Investigation. PhD thesis.
Sen, Dilip Kumar (2017) Analysis of Decision Support Systems of Industrial Relevance: Application Potential of Fuzzy and Grey Set Theories. PhD thesis.
Seth, Biswanath (2017) Statistical Optimization of Cultivation Conditions for the Enhanced Production of Bacosides from Bacopa Monnieri Cell Suspension Culture. MTech thesis.
Shaik, Jakeer Hussain (2017) Studies on Design of Spindle-tool System and Their Effects on Overall Milling Process Stability. PhD thesis.
Shama, Shaik (2017) Comparison of Mechanical Properties of Austenitic Ductile Cast Iron with Ferritic/Pearlitic Ductile Cast Iron. MTech by Research thesis.
Sharma, Abhishek (2017) Investigations of a Direct Injection Diesel Engine Run on Non Petroleum Fuel Blends. PhD thesis.
Shaw, Sanu (2017) Mechanical Property Enhancement of PVP-PVA Nanocomposite by Graphene Oxide. MTech thesis.
Singh, Akhilesh Kr. (2017) Study on The Effect of Different Sols on High Alumina Castable Refractory. PhD thesis.
Singh, Bhisham Narayan (2017) Development of Novel Silk Fibroin/Carboxymethyl Cellulose Based Electrospun Nanofibrous Scaffolds for Bone Tissue Engineering Application. PhD thesis.
Singh, Jagarti (2017) Protein glycation and oxidative stress in pathophysiology of diabetic complications. MTech thesis.
Singh, Kanwar Abhay (2017) Effect of Graphene Quantum Dots on Health and Environment: Implications for Everyday Life. MTech thesis.
Singh, Mangal (2017) On PAPR Reduction of OFDM using Partial Transmit Sequence with Intelligent Optimization Algorithms. PhD thesis.
Singh, Vivek Pratap (2017) Niobium & Vanadium Quantum Dot and their application in Cell Imaging. MTech thesis.
Sinha, Niharika (2017) Mechanism of Tumor Inhibitory Potential of Abrus Agglutinin in Oral Squamous Cell Carcinoma. PhD thesis.
Sourav, Suman (2017) Fluoride Pollution and its Control in Mining Areas. MTech thesis.
Tiwari, Bablu (2017) Developing wireless ECG device using Bluetooth protocol for interfacing with Android based applications. MTech thesis.
Tiwari, Navneet (2017) Preparation and Characterization of Hydroxyapatite-Alumina-Zirconia Composite. MTech thesis.
Tripathy, Abinash (2017) Sentiment Analysis Using Machine Learning Techniques. PhD thesis.
Tudu, Kapura (2017) Experimental Studies of a Direct Injection Diesel Engine Fuelled with Light Fraction Pyrolysis Oil-Diesel Blend. PhD thesis.
Vishwanath, Varshini (2017) Development of Silk Fibroin/Chitosan Based Porous Scaffolds for Cartilage Tissue Engineering. PhD thesis.