Browse by Thesis Type
Number of items: 730.
Singh, Bhagat (2011) Study of damping in layered and welded
Raghavendra, Gujjala (2015) Mechanical and Tribological Behavior of Nanofiller Reinforced Polymer Nanocomposite. PhD thesis.
, Rinshu (2018) Assessing Inequity, Catastrophe and Impoverishment in Healthcare Expenditure in India. PhD thesis.
, Sachin (2018) Evolution of Dam Breach and Routing of the Flood Waves at the Downstream Reaches. PhD thesis.
., Saswati (2015) Thiosemicarbazone complexes of transition metals: Synthesis, characterization and study of reactivity. PhD thesis.
Acharya, Debiprasad Priyabrata (2008) Development of Novel Independent Component Analysis Techniques and their Applications. PhD thesis.
A V, Asha (2008) Parametric Resonance Characteristics of Laminated Composite Twisted Cantilever Panels. PhD thesis.
Alur, Sidramappa (2012) Experimental studies on plate fin
Acharya, Sharda (2015) Popular Culture and English Language Learning: A Study among Youth in India. PhD thesis.
Agrawal, Alok (2015) Thermal and Dielectric Behaviour of Polymer Composites with Hybrid Fillers. PhD thesis.
Adhikari, Sangeeta (2015) Nanostructured WO3 for Electrochromic and Photocatalytic Applications. PhD thesis.
Acharya, Bibhudendra (2015) On the Development of Novel Encryption Methods for Conventional and Biometric Images. PhD thesis.
Arakha, Manoranjan (2017) Effects of Photocatalytic Nanoparticle Interfaces on Biological Membranes and Biomacromolecules. PhD thesis.
Atta, Debabrata (2017) Development of Robust Control Strategies for Autonomous Underwater Vehicles. PhD thesis.
Acharya, Aditya (2018) Development of Some Spatial-domain Preprocessing and Post-processing Algorithms for Better 2-D Up-scaling. PhD thesis.
Agrawal, Parinita (2018) Development of Cell-Scaffold Construct for Cartilage Tissue Regeneration. PhD thesis.
Allaparthi, Muddu (2018) Three-Dimensional Finite Element Analysis of Conventional and Ultrasonic Vibration Assisted Micro-Drilling on PCB. PhD thesis.
Asthana, Shreyasi (2018) The Effects of Zinc Oxide Nanoparticle Interface on Conformational Dynamics of Protein Models From Different Structural Hierarchies. PhD thesis.
Alam, Shamshad (2018) Characterization for Effective Management and Utilization of Red Mud. PhD thesis.
Agir, Sujeevan Kumar (2019) Detection and Quantification of Arsenic in Contaminated Drinking Water Using Electronic Tongue. PhD thesis.
Ala , Charan Kumar (2019) Qualitative and Quantitative Approaches for Evaluation of Safety Risks in Coal Mines. PhD thesis.
Ayyalusamy, Sureshkumar (2019) Preparation and Characterization of Activated Carbon from Post-consumer Polyethylene terephthalate Bottles and its Applications in Carbofuran Detection and Removal. PhD thesis.
Brahma, K C (2007) A Study on Application of Strategic Planning And Operations Research Techniques in Open Cast Mining. PhD thesis.
Baral, S S (2007) Adsorption of Hexavalent Chromium from Aqueous Solution using Various Adsorbents. PhD thesis.
Bhoi, Nilamani (2009) Development of Some Novel Spatial-Domain and Transform-Domain Digital Image Filters. PhD thesis.
Behera, S K (2007) Novel Tuned Rectangular Patch Antenna as a Load for Phase Power Combining. PhD thesis.
Banjare, Yamuna Prasad (2009) Theoretical and Experimental Studies on Pulse Tube Refrigerator. PhD thesis.
Biswas, Sandhyarani (2010) Processing, Characterization and Wear Response Of Particulate Filled Epoxy Based Hybrid Composites. PhD thesis.
Badapanda, Tanmaya (2010) Structural, Electrical and Optical Study of ‘A’ Site Deficient Heterovalent Ion Doped Barium Zirconium Titanate Perovskite. PhD thesis.
Babu, B. Chitti (2012) Study of inverter-interfaced wind power generation system under balanced & unbalanced grid voltage conditions. PhD thesis.
Behera, Banita (2013) Experimental And Numerical Investigation Into Behaviour Of Fly Ash Composite Material In The Subbase Of Surface Coal Mine Haul Road. PhD thesis.
Biswal, Nihar Ranjan (2012) Studies on Adsorption and Wetting Phenomena Associated with Solid Surfaces in Aqueous Synthetic and Natural Surfactant Solutions. PhD thesis.
Beriha, Gouri Shankar (2012) Occupational Health and Safety (OHS) Issues in Social Marketing. PhD thesis.
Behera, P (2013) Experimental studies on utilization of used transformer oil as an alternative fuel in a DI diesel engine. PhD thesis.
Bagadi, K P (2014) On Development of Some Soft Computing Based Multiuser Detection Techniques for SDMA–OFDM Wireless Communication System. PhD thesis.
Behera, Rabi Narayan (2013) Behaviour of Shallow Strip Foundation on Granular Soil Under Eccentrically Lnclined Load. PhD thesis.
Babu, Korra Sathya (2013) Utility-Based Privacy Preserving Data Publishing. PhD thesis.
Bissoyi, Akalabya (2013) Cryopreservation of mesenchymal stem cell and tissue engineered constructs using non-toxic cryoprotective agents. PhD thesis.
Bhuyan, Kanhu Charan (2014) Development of controllers using FPGA for fuel cells in standalone and utility applications. PhD thesis.
Behera, DiptiranJan (2014) Numerical solution of static and dynamic problems of imprecisely defined structural systems. PhD thesis.
Bira, Bibekananda (2014) Lie group analysis and evolution of weak waves for certain hyperbolic system of partial differential equations. PhD thesis.
Bonala, Sathyam (2015) Stability Analysis and Design of Digital Compensators for Networked Control Systems. PhD thesis.
Behera, Laxmi (2015) Numerical Solution of Static and Dynamic Problems of Nanobeams and Nanoplates. PhD thesis.
Banjare, Pallavi (2016) Subjective Well-Being, Health and Healthcare Utilization: A Study of Rural Elderly in Odisha. PhD thesis.
Boxi, Siddhartha Sankar (2016) Synthesis and Characterization of Ag Doped TiO2, CdS, ZnS Nanoparticles for Photocatalytic, Toxic Ions Detection, and Antimicrobial Applications. PhD thesis.
Biswal, Achyuta Kumar (2016) Exploring the Physics and Application of biphasic La2NiMnO6 based Double Perovskites. PhD thesis.
Behera , Beauty (2016) Preparation and Evaluation of Sorbitan Monopalmitate and Sunflower Oil Based Biphasic Formulation as Matrices for Controlled Delivery. PhD thesis.
Barpanda, Soubhagya Sankar (2016) Development of Multirate Filter – Based Region Features for Iris Identification. PhD thesis.
Beura, Shradhananda (2016) Development of Features and Feature Reduction Techniques for Mammogram Classification. PhD thesis.
Biswas, Astik (2016) Performance Enhancement of Automatic Speech Recognition (ASR) Using Robust Wavelet-Based Feature Extraction Techniques. PhD thesis.
Barik, Debabrata (2016) Experimental studies on Biogas Production and Its Utilization in a Direct Injection Diesel Engine Run on Dual Fuel Mode. PhD thesis.
Behera, Santi (2015) Study of Voltage Stability Using Intelligent Techniques. PhD thesis.
Bahubalendruni, M V A Raju (2016) Computer Aided Optimal Robotic Assembly Sequence Generation. PhD thesis.
Ban, Deependra Kumar (2016) Interaction of Metal-Based Nanoparticles with Proteins: Relation to Structure, Function and Amyloid Forming Propensity of Lysozyme and α-Lactalbumin. PhD thesis.
Balabantaray, Bunil Kumar (2016) Design and Development of Robotic Part Assembly System under Vision Guidance. PhD thesis.
Behera, Ranjan Kumar (2016) Development Of Spheroidal Graphite Cast Iron For Nuclear Fuel Transport Cask. PhD thesis.
Bhoi, Sourav Kumar (2017) Path Selection based Routing Protocols for Urban Vehicular Ad Hoc Networks. PhD thesis.
Bankoti, Anil Kumar Singh (2017) Creep, tensile and corrosion behaviour of Ca and/or Sb added AZ91 Mg alloys. PhD thesis.
Bendu, Harisankar (2017) Experimental and Numerical Analysis of Ethanol Fueled HCCI Engine. PhD thesis.
Boddula, Rajamouli (2017) Luminescent EuIII complexes based on phenanthro-imidazole ligands for white LEDs/OLEDs and temperature sensors: Combined experimental and theoretical investigations. PhD thesis.
Behera, Satyananda (2017) N220 Nanocarbon Black Containing Low Carbon MgO-C Refractory. PhD thesis.
Biswal, Alok Ranjan (2017) Geometric Nonlinear Finite Element and Genetic Algorithm Based Vibration Energy Harvesting from Functionally Graded Nonprismatic Piezolaminated Beams. PhD thesis.
Behera, Suraj Kumar (2017) Tribology and Rotordynamics of Small High-Speed Cryogenic Turboexpander. PhD thesis.
Behera, Santosh Kumar (2018) Development of Improved Active Noise Control Systems and their Real-Time Evaluation. PhD thesis.
Beura, Sambit Kumar (2018) Investigation and Modeling of Urban Street Bikeability from User’s Perspective. PhD thesis.
Bhoi, Yagna Prakash (2018) Photocatalytic Application of Bismuth Based Semiconducting Nanoparticles and their Heterostructures towards Selective Organic Transformations and Degradation of Persistent Organic Pollutants. PhD thesis.
Bag, Aurobinda (2018) Development of Adaptive Controllers for Grid Integration of a Three-Phase PV System. PhD thesis.
Bhosale, Avadhoot (2018) Studies on Vertically Irregular RC Infilled Frame Buildings. PhD thesis.
Bisht, Dhananjay Singh (2019) Conceptual Design Approach for Woodworking Chisel Handle. PhD thesis.
Bharti, Santosh Kumar (2019) Sarcasm Detection in Textual Data: A Supervised Approach. PhD thesis.
Buddala, Raviteja (2019) A meta-heuristic approach for solving flexible flow-shop and job-shop scheduling problems. PhD thesis.
Behera , Gitanjali (2019) Starch Gelatinization and Drying of Paddy using Microwave Heating. PhD thesis.
Biswal, Deepak Kumar (2019) Study on Buckling, Free Vibration and Parametric Resonance of Sandwich Shell Panels with Viscoelastic Material Core. PhD thesis.
Chawla, B S (2005) An Analysis of Strain in Chip Breaking Using Slipline Field Theory with Adhesion Friction at Chip/Tool Interface. PhD thesis.
Choudhury, Bibhuti Bhusan (2009) Task Allocation Strategies in Multi-Robot Environment. PhD thesis.
Chinara, Suchismita (2011) Analysis and Design of Protocols for Clustering in Mobile Ad Hoc Networks. PhD thesis.
Chakrabarti, Arundhati (2011) Effect of Some Isovalent and Aliovalent Substitutions on Structure and Ferroelectric Properties of BaBi4Ti4O15. PhD thesis.
Chaudhuri, Rajib Ghosh (2013) Studies on Sulfur Templated Core/Shell and Hollow Nanoparticles Synthesized in Aqueous Micellar Media. PhD thesis.
Choukiker, Yogesh Kumar (2013) Investigations on some compact wideband fractal antennas. PhD thesis.
Choudhury, Balaji Kumar (2013) Design and Construction of Turboexpander based Nitrogen Liquefier. PhD thesis.
Chhotaray, Sukant Kumar (2015) Asymmetric Image Encryption based on Cipher Matrices. PhD thesis.
Chakraverty, Ananta Prasad (2015) Some Aspects of Evaluation of GFRP Composite Depending on Its End Use. PhD thesis.
Chithra, R (2016) Interference cancellation and Resource Allocation approaches for Device-to-Device Communications. PhD thesis.
Chaudhuri, Biswadeep (2016) Development of Novel Scaffolds for Skeletal Muscle Tissue Engineering Applications. PhD thesis.
Chandraker, Saurabh (2016) Modelling and Model Reduction of Viscoelastic Composite Rotors - An Operator Based Approach. PhD thesis.
Chakraborty, Jaya (2016) Diversity, Molecular Characterization and Bioremediation Potential of Cadmium Resistant and Biphenyl Degrading Marine Bacteria. PhD thesis.
Choudhury, Snigdha Bharati (2017) A Study on Adams Completion and Cocompletion. PhD thesis.
Choudhury, Suman Kumar (2017) Pedestrian Detection Surveillance Videos using Background Modeling and Feature Engineering. PhD thesis.
Chatterjee, Aditi (2018) Development Of Efficient Control Strategies For Single Phase Grid Integrated Inverters For Photovoltaic Applications. PhD thesis.
Chakraborty, Sudipta (2018) PID Controller Design for Integrating Plus Time-Delay Processes. PhD thesis.
Choudhary, Abhisek (2018) Fabrication and Characterization of Preceramic Polymer Derived Macroporous Silicon Oxycarbide. PhD thesis.
Champaty, Biswajeet (2019) Development of Electrooculogram-based Multi-Assistive Device Control System for Neuromuscular Disabled. PhD thesis.
Chhotray, Animesh (2019) Balanced Postural Control and Path Planning Analysis of a Two-Wheeled Mobile Robot Using Various Soft Computing Techniques. PhD thesis.
Chander , B Bhanu (2019) Development of Multi-Criteria Decision-making Model using Fuzzy-AHP Technique for Selection of Underground Metal Mining Method. PhD thesis.
Choubey, Mayank (2019) Modeling of Vibration Assisted Micro Electrical Discharge Machining for Fabrication of Micro Holes in Inconel 718. PhD thesis.
Chandran, Ramkumar (2019) Electrochemical Deposition of Cu-Based Chalcopyrite (CISe/CIGSe) Thin Films for Photovoltaic Applications. PhD thesis.
Dundur, S T (2005) Slipline Field Analysis of Deformation In Metal Machining with Worn Tool with Adhesion Friction in Contact Regions. PhD thesis.
Das, Susmita (2004) Adaptive Equalisation of Communication Channels Using ANN Techniques. PhD thesis.
Das, P K (2006) Variational Inequality Problems in H-Spaces. PhD thesis.
Das, Jitendra Kumar (2010) Low Power Digital Filter Implementation in FPGA. PhD thesis.
Das, S (2007) Study of Plasma Spray Alumina -Aluminide Composite Coating on Metals. PhD thesis.
Dash, Malaya Saurava (2009) Synthesis And Electrical Characterisation of Lanthanum Doped Barium Titanate Zirconate. PhD thesis.
Deo, Chitta Ranjan (2010) Polymer Matrix Composite using Natural Fiber Lantana-Camara. PhD thesis.
Dash, Amiya Kumar (2012) Multiple Damage Identification of Beam Structure
Dash, Ratnakar (2012) Parameters Estimation For Image Restoration. PhD thesis.
Debata, Bikash Ranjan (2013) Evaluation of Perceived Service Quality and Loyalty of Medical Tourists to India. PhD thesis.
Das, Harish Chandra (2009) Intelligent Diagnosis and Smart Detection of Crack in a Structure from its Vibration Signatures. PhD thesis.
Dash, Khushbu (2014) Processing and characterization of Cu-Al2O3 and Al-Al2O3 composites: an evaluation for micro- and nano- particulate reinforcements. PhD thesis.
Dewangan, Shailesh Kumar (2014) Multi-objective optimisation and analysis of EDM of AISI P20 tool steel. PhD thesis.
Dash, Subhashree Priyadarsini (2014) Nonoxido and oxido vanadium complexes featuring O- and N- donor ligands in relation to biological and catalytic activities. PhD thesis.
Das, Santos Kumar (2014) Quality of service estimation techniques for an optical virtual private network over wdm/dwdm network. PhD thesis.
Deepak, B B V L (2015) Design and Development of an Automated Mobile Manipulator for Industrial Applications. PhD thesis.
Das, Kunal Kumar (2011) Development of Novel Techniques to Study Nonlinear Active Noise Control. PhD thesis.
Das, Manab Kumar (2015) Electrocardiogram Signal Analysis for Heartbeat Pattern Classification. PhD thesis.
Deb, Moonmoon (2015) Epigenetic Signatures of Genes and Their Correlations with Various Signaling Pathways During Tumorigenesis. PhD thesis.
Das, Dushmanta Kumar (2015) New Results on Delay-Dependent Stability Analysis and Stabilization of Time-Delay Systems. PhD thesis.
Dash, Hirak Ranjan (2015) Distribution, Genetic Analysis and Bioremediation Potential of Mercury Resistant Marine Bacteria. PhD thesis.
D C , Haran Pragalath (2015) Reliability Based Seismic Design of Open Ground Storey Framed Buildings. PhD thesis.
Devi, Suman (2015) Community Participation and Sustainable Livelihoods: A Study on Watershed Management in Odisha. PhD thesis.
Das, Nabanita (2015) Socio-economic Impact of Mining on Rural Communities: A Study of the Ib Valley Coalfield in Odisha. PhD thesis.
Das, Durgesh Nandini (2015) Elucidating Mechanisms of Benzo[a]pyrene Mediated Apoptotic and Autophagic Cell Death and its Prevention with Phytotherapeutics. PhD thesis.
Das, Subhraseema (2016) Design and Physico-Chemical Properties of Cyclodextrin Incorporated Hydrogels: Application towards Controlled Delivery of Drugs. PhD thesis.
Dash, Smruti Rekha (2015) Effect of Fabrication Methods on the Porosity, Microstructure, Strength and In-Vitro Bioactivity of Porous Hydroxyapatite Scaffolds. PhD thesis.
Dhal, Jyoti Prakash (2015) Novel Metal Oxide Nanostructures for Adsorption and Photocatalytic Degradation of Organic Dyes from Aqueous Stream. PhD thesis.
Dalei, Jyotirmayee (2016) Development of Voltage Controller and Fault Analysis of Self Excited Induction Generator System. PhD thesis.
Das, Deepa (2017) Intelligent Approaches for Energy-Efficient Resource Allocation in the Cognitive Radio Network. PhD thesis.
Dalbehera, Soma (2016) Effect of Cenosphere on the Mechanical and Tribological Properties of Natural Fiber Reinforced Hybrid Composite. PhD thesis.
Das, Adya (2016) A Study on Evaluation of Indigenous Microbial Consortium for Enhanced Decolorization of Textile AZO Dyes and Feasibility for Simultaneous Bioelectricity Generation in A Microbial Fuel Cell. PhD thesis.
Devireddy, Siva Bhaskara Rao (2017) Mechanical, Thermal and Physical Properties of Hybrid Banana-Jute Fibers Reinforced Epoxy and Polyester Composites: Modeling and Experiments. PhD thesis.
Dam, Tapabrata (2017) Study of Relaxation Dynamics and Ion Conduction Mechanism of Composite Polymer Electrolyte and Gel Polymer Electrolyte. PhD thesis.
Das, Kailash Chandra (2017) Sputter Synthesis of Multifunctional Hafnium Oxide Based Thin Films for Gate Dielectric and Memory Applications. PhD thesis.
Davala, Ravi Kumar (2017) Algebraic and Geometric Aspects of some Binary Recurrence Sequences. PhD thesis.
Devi, Kamalini (2018) Flow Modelling in Straight Compound Channels with Symmetrical, Asymmetrical and Unsymmetrical Floodplains. PhD thesis.
Dash, Saine Sikta (2018) Flow Modelling of Straight and Meandering Compound Channels. PhD thesis.
Dash, Ranjita Kumari (2018) Thermal Management in Three Dimensional Network-on-Chip Based
D., Seshu Kumar (2018) Devising Numerical Methods for Simulation, Identification and Control of Fractional Order Processes. PhD thesis.
Das, Bhabani Shankar (2018) Non-uniform flow modelling in compound channels with non-prismatic floodplains. PhD thesis.
Dwivedi, Ashish Kumar (2019) Formalization and Detection of Software
De, Debajit (2019) Design and Development of Novel End-Fired Microstrip Antenna for Aircraft Collision Avoidance System. PhD thesis.
Dixit , Rahul (2019) Detection of Image Region Duplication through Digital Forensics. PhD thesis.
Das , Abhijit (2018) Study of Non-Newtonian Swirling Flows Near Rotating Disks. PhD thesis.
Dash, Santanu Kumar (2019) Performance Enhancement of Photovoltaic Integrated Unified Power Quality Conditioner for Power Quality Improvement. PhD thesis.
D, Selva Kumar (2019) Practices of Capital Structure, Ownership Concentration, Business Groups, and Corporate Performance: An Empirical Indian Evidence. PhD thesis.
Das, Rahul Kumar (2019) Luminescent Heteroatom doped Carbon Quantum Dots for Sensing and Drug Delivery Applications. PhD thesis.
Das, Satyajit (2019) Robust Active and Reactive Power Controllers for a Grid Connected Wind Energy Conversion System. PhD thesis.
Dwivedy, Biswajit (2019) Investigations on Reconfigurable Planar Antennas and Devices. PhD thesis.
Dash, Tushar Ranjan (2019) Monitoring and Prediction of Fugitive Dust Concentration in Mechanized Opencast Coal Mine. PhD thesis.
Dewangan, Smriti (2019) Organometallic compounds containing redox and fluorescent active moieties: Synthesis, characterization and biological study. PhD thesis.
Dhumal, Chanda Vilas (2020) Development and Characterization of Biopolymer-based Composite Edible Films with Antimicrobial Functionality. PhD thesis.
Dash, Ashish Ranjan (2019) Investigation of Cascaded Multilevel Inverter Based SAF with Alternative Configurations Under Ideal and Nonideal Grid Voltage Conditions. PhD thesis.
Ekka, Basanti (2017) Synthesis of Nanoporous Materials for Abatement of Inorganic and Organic Contaminants in Water. PhD thesis.
Ghosh, S K (2008) Experimental and Computational Studies on Cryogenic Turboexpander. PhD thesis.
Gottipati, Ramakrishna (2012) Preparation and Characterization of Microporous Activated Carbon from Biomass and its Application in the Removal of
Giri, Anil Kumar (2012) Removal of Arsenic (III) and Chromium (VI) from The Water Using Phytoremediation and Bioremediation Techniques. PhD thesis.
Gupta, Gaurav (2015) A Study on Using Glass Micro-Spheres in Erosion Resistant Coatings and Polymer Composites. PhD thesis.
Garnayak, Sarita (2016) Oxidation of Some Biologically Important Organic Substrates by Lipopathic Cr(VI) and Mn(VII): Kinetics and Mechanistic Study. PhD thesis.
Ganguly, Abhijeet (2016) Economic Design of Control Charts Using Metaheuristic Approaches. PhD thesis.
Ghosh, Dipak Kumar (2016) A Framework for Vision-based Static Hand Gesture Recognition. PhD thesis.
Guru, Nibedita (2016) Flood Frequency Analysis of Partial Duration Series Using Soft Computing Techniques for Mahanadi River Basin in India. PhD thesis.
Gupta, Arun Kumar (2016) Wavelet Methods for the Solutions of Partial and Fractional Differential Equations Arising in Physical Problems. PhD thesis.
Gurrala, Kiran Kumar (2017) Efficient Power Allocation Schemes for Hybrid Decode-Amplify-Forward Relay Based Wireless Cooperative Network. PhD thesis.
Gupta P, Rama Krishna (2017) Impact of Human Resource Development Interventions on Organizational Effectiveness: A Study on Indian Cement Industry. PhD thesis.
Garanayak , Lasyamayee (2017) Development and Characterization of Alkali-Activated Red Mud - Slag Cementitious Material. PhD thesis.
Godboley, Sangharatna (2017) Driving Concolic Testing to achieve higher MC/DC through source code transformations. PhD thesis.
Ghosh, Rupita (2018) Study on the Development of Calcium Phosphate based Machinable Bioceramics. PhD thesis.
Ghosh, Payel (2018) Development of a Process for Clarification and Concentration of Jamun (Syzygium cuminii) Juice using Membrane Filtration. PhD thesis.
Gupta, Ajay Kumar (2018) Performance of Plate Fin Heat Exchanger at Cryogenic Temperature. PhD thesis.
Gorinta, Jayarao (2018) Development of Li4SiO4-based Ceramics for Solid Breeder and CO2 Absorption Applications. PhD thesis.
Ghosh, Manoj Kumar (2018) New Synthetic Intrigues Towards Oxidative Dearomatization and
Giri, Jyoti Prakash (2018) Development and Evaluation of Bituminous Paving Mixtures Containing Treated and Untreated Recycled Concrete Aggregates. PhD thesis.
Goswami, Agam Das (2018) An Evaluation of Multi-point Stochastic approaches for Uncertainty Assessment in Ore Grade Estimation. PhD thesis.
George, Noby (2019) Novel Coreless Current Sensing Systems-Design, Development and Evaluation. PhD thesis.
Gupta, Saurav (2019) Distributed Strategies for Nonlinear System Identification. PhD thesis.
Gupta, Pradeep (2019) Aluminum-Cu50Zr50 Metallic Glass Interface: Deformation Behavior, Deformation Mechanisms, Structure, And Fracture Studies. PhD thesis.
Gupta, Neha (2019) Unsupervised Techniques for Change Detection in Multispectral Images. PhD thesis.
Gogikar, Priyanjali (2019) Assessment and Prediction of Particulate Matter Using In-Situ and Remote Sensing Data Sets. PhD thesis.
Govindaiah, Pilli (2019) Design, Synthesis, Pharmacological and Pharmacoinformatic Analysis of Novel Coumarin-Based Hydrazone Derivatives as Anticancer Drugs. PhD thesis.
Hansdah, Dulari (2015) Experimental Studies on Partial Substitution of Diesel With Bioethanol (Derived From Madhuca Indica Flowers) Using Different Techniques. PhD thesis.
Hmar, Baby Zaithanpuii (2018) Design and Development of a Pulper for Kendu Fruit. PhD thesis.
Hirwani, Chetan Kumar (2019) Experimental and Numerical Analysis of Nonlinear Dynamic Behavior of Delaminated Composite Shell Panel under Hygro-thermo-mechanical Loading. PhD thesis.
Hiremath, Shrishailayya M (2019) On Some Signal Processing Algorithms Applicable to Cognitive Radio Communication. PhD thesis.
Islam, Mahamudur (2008) Development of Adsorption Media for Removal of Lead and Nitrate from Water. PhD thesis.
Inala, Ramu (2015) On the Dynamic Stability of Functionally Graded Material Plates Under Parametric Excitation. PhD thesis.
Jena, H M (2009) Hydrodynamics of Gas-Liquid-Solid Fluidized and Semi-Fluidized Beds. PhD thesis.
Jena, Debasish (2010) On Protocols for Information Security Services. PhD thesis.
Jena, Debashisha (2010) Evolutionary Neuro-Computing Approaches to System Identification. PhD thesis.
Jena, A K (2013) Cu/Fe-Catalyzed C-C, C-N and C-S Cross-Coupling Reactions:
Jaipuria, Sanjita (2015) The Effect of Uncertainties on Multi-Echelon Serial Supply Chains. PhD thesis.
Jena, Sambedna (2015) Competency Based Executive Performance Assessment in Manufacturing Units: An Empirical Analysis. PhD thesis.
Jena, Subasini (2016) Studies on Drying Characteristics of Some Crops in a Portable Tapered Fluidized Bed Dryer and Its Design Optimization. PhD thesis.
Jha, Panchanand (2015) Inverse Kinematic Analysis of Robot Manipulators. PhD thesis.
Jha, Alok Kumar (2016) Intelligent Control and Path Planning of Multiple Mobile Robots Using Hybrid Ai Techniques. PhD thesis.
Jena, Shakti Prasanna (2016) Dynamic Analysis and Fault Detection of Multi Cracked Structure Under Moving Mass Using Intelligent Methods. PhD thesis.
Jha, Preeti (2017) Two Stage Synthesis of Aromatic Thioethers using Hydrogen Sulfide and Reusable Phase Transfer Catalyst. PhD thesis.
Jammu, Bhaskara Rao (2017) Development of FPGA based Standalone Tunable Fuzzy Logic Controllers. PhD thesis.
Jena, Prabir Kumar (2017) Crack Assessment of Beam Structures from Changes in Natural Frequencies Using Meta-heuristic Approaches. PhD thesis.
Jain, Jitendra Kumar (2017) Stability Analysis and Robust Controller Design of Indirect Vector Controlled Induction Motor. PhD thesis.
Jena, Adarsha kumar (2018) Estimating Parameters under Equality and Inequality Restrictions. PhD thesis.
Jena, Suprava (2018) Performance Assessment of Urban Street Facilities Addressing Improvement Issues of Automobile Mode. PhD thesis.
JOSEPH, SHINCE V. (2018) Buckling, Free Vibration and Dynamic Stability of Sandwich Plates with Functionally Graded Material Constraining Layer. PhD thesis.
Joshi, Devendra (2018) Stochastic Open Pit Mine Production Scheduling under Geological Uncertainties. PhD thesis.
Jha, Sunanda (2019) Service Sector Micro Enterprises: Informality ,Migration and Productivity. PhD thesis.
Joshi, Mahendra Chandra (2019) Control & Energy Management of Battery/Ultracapacitor Based Hybrid Energy Storage System. PhD thesis.
Jena, Shreeshan (2020) Gait Analysis of the Lower Limbs: A Systematic Approach for Design and Analysis of an Orthotic. PhD thesis.
Khan, M S (2008) Studies on Some Aspects of Service Quality Evaluation with Specific Relevance to Indian Service Industries. PhD thesis.
Kumar, A (2003) Effect of Promotor and Distributor Parameters on the Performance of Gas-solid Fluidized Beds. PhD thesis.
Khatua, K K (2007) Interaction of Flow and Estimation of Discharge in two Stage Meandering Compound Channels. PhD thesis.
Kanungo, Priyadarshi (2009) Parallel Genetic Algorithm based Thresholding Schemes for Image Segmentation. PhD thesis.
Kanungo, Priyadarshi (2009) Parallel Genetic Algorithm based Thresholding Schemes for Image Segmentation. PhD thesis.
Kar, Pravat Surya (2011) Buyer-Seller Relationship Success in Retail Selling of Financial Services. PhD thesis.
Kulkarni, Ramesh (2012) Novel Restoration Techniques for Images Corrupted with High Density Impulsive Noise. PhD thesis.
Kashyap, Sudhir Kumar (2012) Optimisation of Support Parameters in Mining Terrain using Artificial Intelegent Techniques. PhD thesis.
Kulkarni, Ramesh (2012) Novel Restoration Techniques for Images Corrupted with High Density Impulsive Noise. PhD thesis.
Kumari, Rajni (2012) Development of hybrid yeast strains for the production of bioethanol from lignocellulosic biomass. PhD thesis.
Kumari, R (2013) Investigations on possible realization of log periodic dielectric resonator antenna. PhD thesis.
Kumar, Sachin (2014) Conversion of waste high-density polyethylene into liquid fuels. PhD thesis.
Karuppanan, P (2012) Design and Implementation of Shunt Active Power
Kumar, S. Naresh (2012) Synthesis & Characterization of Sr0.53Ba0.47Nb2O6 based Ferroelectric Composites for Pyroelectric Applications. PhD thesis.
Kumar, Gaurav (2013) Vapour-liquid Equilibrium of Carbon Dioxide in Newly Proposed Blends of Alkanolamines. PhD thesis.
Kujur, Arpna (2014) Effect of Various Pinning Centers on Electric and Magnetic Transport Properties in YBa2Cu3O7-δ. PhD thesis.
Korumilli, Tarangini (2015) Studies on Pigment Production by Microorganisms Using Raw
Kar, Purabi (2015) Preparation, Characterization and Catalytic Applications of Pillared Clay Analogues and Clay-Polymer Composite Materials. PhD thesis.
Kavi, Binit (2014) Dynamics and Damping of Thin Riveted Beam Composite Structures of Various Configurations. PhD thesis.
Khapre, Akhilesh Prabhakar (2015) Numerical Study of Mixing of Different Newtonian and Non-Newtonian Fluids in Stirred Tank. PhD thesis.
Kar, Vishesh Ranjan (2015) Nonlinear Thermoelastic Static Vibration and Buckling Behaviour of Functionally Graded Shell Panel. PhD thesis.
Kumar, Abhishek (2015) Experimental Investigations on Machining of CFRP Composites: Study of Parametric Influence and Machining Performance Optimization. PhD thesis.
Khan, Irshad Ahmad (2015) Study of Computational and Experimental Methodologies for Cracks Recognition of Vibrating Systems using Modal Parameters. PhD thesis.
Kundu, Shubhasri (2015) Navigational Strategies for Control of Underwater Robot using AI based Algorithms. PhD thesis.
Kakarla, Jagadeesh (2016) Development of Energy and Delay Efficient Protocols for WSAN. PhD thesis.
Kolluru, Venkata Ratnam (2016) Design and Development of FPGA based Controllers for Photovoltaic Power System. PhD thesis.
Khadanga, Rajendra Kumar (2016) Performance Analysis of Flexible A.C. Transmission System Devices for Stability Improvement of Power System. PhD thesis.
Kondasani, Rama Koteswara Rao (2016) Managing Customer Perceived Service Quality in Private Healthcare Sector in India. PhD thesis.
Kar, Swayamsiddha (2017) Investigation of the Epigenetic Regulators and Signaling Pathways influencing Pluripotency Inducing Transcription Factors mediated Tumorigenesis. PhD thesis.
Kumar, S. Shiva (2016) Development of Efficient Soft Switching Synchronous Buck Converter Topologies for Low Voltage High Current Applications. PhD thesis.
Kumar, Mukesh (2017) Analysis of Microarray Data using Machine Learning Techniques on Scalable Platforms. PhD thesis.
Kumar, Anshuman (2017) Investigations on Machining Aspects of Inconel 718 During Wire Electro-Discharge Machining (WEDM): Experimental and Numerical Analysis. PhD thesis.
Killi, Muralidhar (2017) Development of Efficient MPPT Algorithms with Reduced Number of Sensors for Photovoltaic Systems. PhD thesis.
Kashyap, Swarnima (2017) Interface Strengthened Graphene Oxide Reinforced PVA Nanocomposites. PhD thesis.
Kavuri, Naga Chaitanya (2017) Source Apportionment and Forecasting of Aerosol in a Steel City - Case Study of Rourkela. PhD thesis.
Kumari, Namrata (2017) Exploiting Local Algal Diversity for Bio-Diesel Production. PhD thesis.
Kishore, M. L. Pavan (2017) Hydrodynamic Design Structural Analysis and Optimization of Marine Propeller Blade. PhD thesis.
Kumar, Brijesh (2017) Uncertainties in the Hydrological Modelling Using Remote Sensing Data over the Himalayan Region. PhD thesis.
Kaur, Tejinder (2017) Development of carbon reinforced polymer-ceramic composites for bone tissue engineering. PhD thesis.
Kumar, Lov (2017) Predicting Software Quality Parameters using Artificial Intelligence Techniques and Source Code Metrics. PhD thesis.
Kulanthaivel , Senthilguru (2017) Cobalt Doped Nano-Hydroxyapatite Incorporated Gum Tragacanth-Alginate Polymeric Beads: An Angiogenic-Osteogenic Matrix for Bone Tissue Engineering. PhD thesis.
Kothuru , Venkata Vara Lakshmi (2017) Kinematic Design, Dynamic Modelling and Control Studies of Revolute Planar Parallel Manipulator with Secondary Considerations. PhD thesis.
Kumar , Saurabh (2017) Study of Dynamics of Functionally Graded Structural Elements Considering Geometric Nonlinearity. PhD thesis.
Kumari, Supriya (2018) Bioremediation potential of biofilm forming lead resistant and naphthalene utilizing marine bacteria. PhD thesis.
Kumar, Aniket (2018) Metal Oxide-Decorated Graphene Oxide Nanocomposites for Catalytic and Photocatalytic Applications. PhD thesis.
Kumar, Lailesh (2017) Development of Cu and Al-Based Metal Matrix Composites using Graphite Nanoplatelets and Multiwalled Carbon Nanotubes as Reinforcement. PhD thesis.
Kajjam, Aravind Babu (2018)
Kumar, Dhananjay (2018) Changing Agricultural Practices and their Impact on Rural Social Institutions in Uttar Pradesh, India. PhD thesis.
Khan, Akhtar (2018) Machinability Assessment of Commercially Pure Titanium (CP-Ti) Grade 2 during Turning Operation. PhD thesis.
Kumar, Dhiraj (2018) Political Ecology of Everyday Resistance and State Building: A Case of the Ho of Jharkhand, India. PhD thesis.
Kumar, Ch Sateesh (2018) Effect of Surface Modifications on the Hard Turning Performance of Al2O3/TiCN Mixed Ceramic Cutting Tools. PhD thesis.
Kumar, Harinandan (2018) Estimation and Simulation of Gas Permeability as well as Stress-Strain Behaviour of some Indian Coal Seams. PhD thesis.
Karthik, Guntha (2019) Real-Time Monitoring of Slope Behaviour Using Integrated TDR Based Wireless Sensor Network. PhD thesis.
Kalathiripi, Hussain (2019) Condition Monitoring of High Voltage Transformers Using Spectrophotometric, Dissolved Gas Analysis, and Acoustic Emission Techniques. PhD thesis.
Kukkala, Vivekananda (2019) Ultrasonic Vibration Assisted Turning of a Nickel-based Superalloy: Acoustic Horn Design, Experimental Investigations and Numerical Analysis. PhD thesis.
Kumar, Pankaj (2019) Analysis of Pulse Tube Refrigerator using CFD. PhD thesis.
Kumar, Balmiki (2019) Development of Upconversion and Mesoporous Silica based Nanoparticle Systems for Therapeutic, Bioimaging and Bio-sensing Applications. PhD thesis.
Kumar, Puneet (2019) Material Modeling and Dynamic Analysis Studies of CNT-polymer Nanocomposite Structures. PhD thesis.
Kuila, Sourav (2019) Investigation of Magneto electric Effect in CoFe2O4-BiFeO3
Kumar, Priyadarshi Biplab (2019) Motion Planning Strategies for Humanoid Robots Using Computational Intelligent Techniques with Computer Vision Assistance. PhD thesis.
Kommukuri , Vinaya Sagar (2019) Design and Implementation of Single Stage Bridgeless SEPIC Power Factor Corrected AC-DC Converter. PhD thesis.
Kumari, Chandrika (2019) Experimental and numerical study for skin tumour ablation using cryotherapy. PhD thesis.
Koochana , Prashanth Kumar (2019) Facilitating Iron Acquisition from Ferritin Protein Nanocage by Reductive Pathway: Role of Electron Transfer Mediators and Chelators. PhD thesis.
Kumar, Vikram (2019) Constraint Based Quality Estimation and Performance Analysis in WDM/DWDM Network. PhD thesis.
Kotta, Anand Babu (2019) Studies on the Chemical, Physical and Mechanical Properties of Different Iron Ore Pellets Prepared under Different Conditions. PhD thesis.
Kant, Sunny (2020) A Study on Clouds, Precipitation and Radiation Response to Aerosols Over Different Parts of Indian Region. PhD thesis.
Kumar, Vikas (2020) Extraction and Recovery of Various Wastewater Contaminants Using Liquid Membrane Techniques. PhD thesis.
Koteswararao, D (2020) Dynamic Analysis and Active Control of Functionally Graded Rotor Shaft System. PhD thesis.
Kundu, Amar (2019) Anatase Titania Based Nanomaterials for Environmental Remediation. PhD thesis.
Lohith Kumar, D H (2017) Designing and Characterization of Emulsion-Based Matrices for the Encapsulation of Bioactive Oils using Polysaccharides. PhD thesis.
Locharla, Govinda Rao (2018) Variable length FFT/IFFT Processor: Algorithm to Architecture Mapping and Implementation. PhD thesis.
Lala, Himadri (2019) Detection and Localization of Faults in Distribution System Using Frequency and Time-Frequency Domain Analysis. PhD thesis.
Mohanty, S C (2005) Dynamic Stability of Beams Under Parametric Excitation. PhD thesis.
Mishra, P C (2005) Some Aspects of the Quality of Water in and around Rourkela. PhD thesis.
Meher, S (2004) Development of Some Novel Nonlinear and Adaptive Digital Image Filters for Efficient Noise Suppression. PhD thesis.
Maity, S K (2007) Multiphase Reactions (Utilization of Hydrogen Sulfide For the Production of Value-Added Chemicals). PhD thesis.
Majhi, Babita (2009) On Applications of New Soft and Evolutionary Computing Techniques to Direct and Inverse Modeling Problems. PhD thesis.
Mohanty, Yashobanta Kumar (2007) Dynamics of Promoted Gas-Solid Fluidized Bed using Secondary
Mallik, Archana (2010) Effects of Temperature and Ultrasound on Nucleation Behavior during Electrochemical Synthesis of Copper Thin Films. PhD thesis.
Mohanty, Ramesh Chandra (2010) Damping of Layered and Jointed Beams with Riveted Joints. PhD thesis.
Mohanty, Jyotiranjan (2009) Fatigue Life Prediction Under Constant Amplitude and Interspersed Mode-I and Mixed-Mode (I and II) Overload using An Exponential Model. PhD thesis.
Mohanty, Sanjeeb (2010) Some Studies on Breakdown of Solid Insulations and it’s Modeling using Soft Computing Techniques. PhD thesis.
Mohanta, Annapurna (2011) Superconducting Order Parameter Fluctuation in Doped and Composite Cuprate Superconductors. PhD thesis.
Mishra, Punyapriya (2011) Development and Characterization of Low Cost Composite from Sugarcane Bagasse Waste. PhD thesis.
Matada , Mahesh (2011) Performance Improvement of AC-DC Power Factor Correction Converters For
Mohanta, Jagadish Chandra (2011) Navigational control of multiple mobile robots in various environments. PhD thesis.
Mohanty, Jayaram (2012) Vibration, Buckling and Parametric Resonance Characteristics of Delaminated Composite Plates Subjected to In-plane Periodic Loading. PhD thesis.
Mohapatra, S (2013) Hematological image analysis for acute lymphoblastic leukemia detection and classification. PhD thesis.
Muduli, P K (2013) Evaluation of liquefaction potential of soil using genetic programming. PhD thesis.
Mohanty, P K (2013) Flow Analysis of Compound Channels With Wide Flood Plains
Mishra, D (2014) A study on thermal and dielectric characteristics of solid glass microsphere filled epoxy composites. PhD thesis.
Mehrotra, Hunny (2013) On the Performance Improvement of Iris Biometric System. PhD thesis.
Mishra, Surabala (2012) Structural, electronic and optical Properties of chalcopyrite type Semiconductors. PhD thesis.
Mishra, Sudhansu Kumar (2012) Robust and Constrained Portfolio Optimization using Multiobjective Evolutionary Algorithms. PhD thesis.
Mahapatra, Abhipsa (2013) Fabrication and Characterization of Novel Iron Oxide/ Alumina Nanomaterials for Environmental Applications. PhD thesis.
Mahapatra, Rabindra Narayan (2013) Inventory Models for Manufacturing Process with Reverse Supply Chain. PhD thesis.
Mishra, Swagatika (2013) Studies on some aspects of agility appraisement: empirical research and case studies in Indian perspective. PhD thesis.
Mikkili, Suresh (2013) Performance Analysis of Type-1 and Type-2 FLC based Shunt Active Filter Control Strategies for Power Quality Improvement. PhD thesis.
Mahapatro, Arunanshu (2012) Fault Diagnosis Algorithms for Wireless Sensor Networks. PhD thesis.
Mishra, Alekha Kumar (2014) Node replica detection in wireless sensor networks. PhD thesis.
Mishra, Uttam Kumar (2014) Vibration, Buckling and Dynamic Stability of Stepped Beams with Multiple Transverse Cracks. PhD thesis.
Meher, Janhabi (2014) Rainfall and runoff estimation using hydrological models and Ann techniques. PhD thesis.
Mishra, Vivek (2014) Physical, mechanical and abrasive wear behaviour of jute fiber reinforced polymer composites. PhD thesis.
Murmu, Meena (2014) Studies on physical, chemical and mechanical properties of lime activated slag cement. PhD thesis.
Mohapatra, Sandhya Rani (2014) Adams completion for CW-Complexes. PhD thesis.
Mohanty, Subrat Kumar (2015) Tailoring of ni: 8ysz cermet via solution-based syntheses. PhD thesis.
Meher, Preetisudha (2014) Design and Analysis of Improved Domino Logic with Noise Tolerance and High Performance. PhD thesis.
Mandal, Sandip (2015) Development of new adsorbent materials for the removal of arsenic(iii)and chromium (VI) from water & its mathematical modelling. PhD thesis.
Matawale, Chhabi Ram (2015) Evaluation of Leanness, Agility and Leagility Extent in Industrial Supply Chain. PhD thesis.
Mangwani, Neelam (2015) Understanding Biofilm Formation and Quorum Sensing in Marine Bacteria for Enhanced Utilization in Bioremediation. PhD thesis.
Mohanty, Pragyan Paramita (2015) Studies on Product Design using Ergonomic Considerations. PhD thesis.
Mothkuri, Raghavender (2015) Generation of Enamides and Enol esters: Application to Oxazole and α-Naphthol Synthesis. PhD thesis.
Mishra, Punyatoya (2014) Lead Free Ceramic Polymer Composites for Embedded Capacitor and Piezoelectric Applications. PhD thesis.
Mahanta , Sailendra Kumar (2015) Investigation of Self-Assembled Nanostructured Protein-Based Therapeutic Approaches in Breast Cancer. PhD thesis.
Mohanty, Chinmaya Prasad (2015) Studies on Some Aspects of Multi-objective Optimization: A Case Study of Electrical Discharge Machining Process. PhD thesis.
Mishra, Tusar Kanti (2015) Development of Features for Recognition of Handwritten Odia Characters. PhD thesis.
Mohapatra, Subasish (2016) On Solving Some Issues in Cloud Computing. PhD thesis.
Mohanty, Prases Kumar (2015) Analysis and Development of Computational Intelligence based Navigational Controllers for Multiple Mobile Robots. PhD thesis.
Mohapatra, Sushanta Kumar (2015) Investigation on Performance Metrics of Nanoscale Multigate MOSFETs towards RF and IC Applications. PhD thesis.
Muduli, Rakesh (2016) Dielectric, Ferroelectric and Impedance Spectroscopic Studies of Agnbo3 and Its Modified Systems. PhD thesis.
Maji, Pallab (2016) On Design and Implementation of Generic Fuzzy Logic Controllers. PhD thesis.
Mall, Susmita (2015) Connectionist Learning Based Numerical Solution of Differential Equations. PhD thesis.
Mohanta, Niharika (2016) Preparation and Characterization of Luffa Cylindrica Fiber Reinforced Polymer Composite. PhD thesis.
Mishra, Swayam (2016) A Study On Parametric Appraisal of Fused Deposition Modelling (FDM) Process. PhD thesis.
Mukhopadhyay, Subhadip (2016) Unraveling the Intricate Molecular Mechanism Between Apoptosis and Autophagy During Cellular Stress. PhD thesis.
Mohapatra, Sambit Kumar (2016) Aluminium Based Material Extrusion Through Mathematical Contoured Die: Numerical & Experimental Investigation. PhD thesis.
Mohapatra, Ramesh Kumar (2016) Handwritten Character Recognition of a Vernacular Language: The Odia Script. PhD thesis.
Mohanty, Madhusmita (2016) International Capital Flows and Financial Market Dynamics: Empirical Evidence from the Indian Stock Market. PhD thesis.
Maharana, Himanshu Sekhar (2016) Surface Modification of Copper by Electro-codeposition. PhD thesis.
Mondal, Ujjal (2017) Chemoselective Reduction of Nitroarenes using Hydrogen Sulphide under Phase Transfer Catalysis. PhD thesis.
Mishra, Himanshu (2017) Modeling and Optimization of Micro-EDM Operation for Fabrication of Micro Holes. PhD thesis.
Mishra, Sasmita (2017) Synthesis and Reactivity of Cyclopentadienyl Based Organometallic Compounds and Their Electrochemical and Biological Properties. PhD thesis.
Mallick, Arundhati (2017) An Evaluation of Core Inflation Dynamics and Its Impact on Macroeconomic Performance in India. PhD thesis.
Maji, Kanchan (2017) Gelatin Chitosan And Bioactive Nanoceramic Based Composite Scaffold For Orthopaedic Application. PhD thesis.
Maiti, Subrata (2017) Analytical Modelling of Ultra-Wide Band Ground Penetrating Radar for Characterization of Subsurface Media. PhD thesis.
Mohanty, Satyajit (2017) Development of Maximum Power Extraction Algorithms for PV system With Non-Uniform Solar Irradiances. PhD thesis.
Mishra, Soumya (2017) Performance Analysis of Photovoltaic Fed Distributed Static Compensator for Power Quality Improvement. PhD thesis.
Mehar, Amit Kumar (2017) Development, Characterization of Mechanical Properties, Wear behaviour and Machining Analysis of Ceramic Composites for Bio-Medical Applications. PhD thesis.
Mishra , Haripriya (2017) Strategies for Removal of Hexavalent Chromium from Contaminated Water in the Mining Area of Sukinda Valley. PhD thesis.
Mishra, Srimant Kumar (2018) Ratcheting and ratcheting-creep interaction in A356 aluminium
Mallam, Chandra Sekhar (2018) Synthesis and Characterization of ST and NN modified BNT-KNN, BNT-BT-BKT Ceramics for Energy Storage Applications. PhD thesis.
Majumder, Sudarshana (2017) Oxidomolybdenum Complexes of Mono- and Dibasic Polydentate Ligands: Characterization, Biological and Catalytic Evaluation. PhD thesis.
Moharana, Bikash Ranjan (2017) Mechanical and Metallurgical Investigation of AISI 304 Stainless Steel and Commercially Pure Copper Dissimilar Metal Couple Weldments. PhD thesis.
Mohanta , Dayanidhi (2018) Molecular Dynamics Studies of the Effects of Alcohols on Chymotrypsin Inhibitor 2. PhD thesis.
Mangaraj, Mrutyunjaya (2018) Design and modelling of DSTATCOM Using Various Hybrid ANN Control Algorithms. PhD thesis.
Mahapatra, Ansuman (2018) Framework and Algorithms for Multi-view Video Synopsis. PhD thesis.
Mishra, Rabi Narayan (2018) Development and Implementation of Some Controllers for Performance Enhancement and Effective Utilization of Induction Motor Drive. PhD thesis.
Mohapatra, Alivarani (2018) Optimized Parameter Estimation, Array Configuration and MPPT Control of Standalone Photovoltaic System. PhD thesis.
Mohapatra, Kasinath Das (2018) Experimental and Numerical Investigations of Machining Ti-6Al-4V Spur Gears Using WEDM Process. PhD thesis.
Mazumdar, Pramit (2018) Human Mobility Analysis in Location-based Social Networks. PhD thesis.
Mishra, Anoop Kumar (2018) Performance Evaluation of Cooperative Relaying Systems with Channel Estimation Error and RF Impairments. PhD thesis.
Mandal, Susmita (2018) On the Design of Key Exchange Protocol and its Variants. PhD thesis.
Mohapatra, Soumyaranjan (2018) Substitution Induced Modifications in Structural, Magnetic and
Mishra, Sarita (2018) Performance, Structure and Compensation Contract of Indian Venture Capital Deal. PhD thesis.
Mahapatra, Subhasish (2018) Nonlinear H∞ Control Algorithms for Autonomous
Mallappa , A. Devani (2018) Removal of Heavy Metals from Solutions Using Cajanus Cajan Husk and Butea Monosperma Leaves as Biosorbents. PhD thesis.
Mohanty, Pratap Ranjan (2018) Topological Issues in PFC Circuit and Nonlinear Controller for Improving Dynamic Performance of AC-DC System. PhD thesis.
Meenakshi, S. (2018) Graduate Attributes vis-à-vis IT Employers’ Expectations: A Study on Undergraduate Engineering Education in India. PhD thesis.
Mahapatro, Soumya Ranjan (2018) Robust Decentralized Control Algorithms for a Multivariable Liquid Level System. PhD thesis.
Mahamaya, Mahasakti (2018) Development and Characterization of Sustainable Geomaterial Using Mining and Industrial Wastes. PhD thesis.
Mohanty, Manasi Manjari (2018) Numerical Simulation of CO2 Sequestration to Enhance Methane Recovery using Multipoint Geostatistics. PhD thesis.
Mahakul, Prakash Chandra (2018) Fabrication and Characterization of Carbon Nanotubes and Graphene based Organic Photovoltaic Cells. PhD thesis.
Mohanty, Manoja Kumar (2019) Reducibility Study of Briquettes Made from Iron Bearing Metallurgical Wastes for use in Iron Blast Furnace. PhD thesis.
Majumder, Himadri (2019) Experimental Investigations on Machinability Aspects of Nickel-Titanium Based Alloys during Wire Electrical Discharge Machining. PhD thesis.
Malik, Prakash Kumar (2019) Solvatochromism and Preferential Solvation of D-Π-A
Mahapatra, Dheeren Ku (2019) Modelling of Heterogeneous SAR Clutter for Speckle Suppression using MAP Estimation. PhD thesis.
Mattan, Irshad (2019) Hypervalent Iodine-Mediated Synthesis of Ortho-Iododiaryl Ethers and Subsequent Annulation to Biologically Relevant Heterocycles. PhD thesis.
Mishra, Sambit Kumar (2019) Techniques to Minimize Energy Consumption in Cloud System. PhD thesis.
Mawatwal, Shradha (2019) Modulation of Autophagy and Its Effect on Intracellular Mycobacteria by Calcimycin. PhD thesis.
Mutra, Rajasekhara Reddy (2019) Dynamics and Control Simulations of Turbocharger Rotor-Bearing Systems. PhD thesis.
Millan, Sabera (2019) Protein stability and conformation: Impact of small molecules and cytoplasmic constituents. PhD thesis.
Moharana, Rajesh (2019) Information Measures for Truncated Random Variables. PhD thesis.
Mishra, Smruti Snigdha (2019) Deciphering the Interaction of Steroidal Biosurfactants with Some Small Molecules and Macromolecules of Biological Relevance: A Photophysical Approach. PhD thesis.
Mohanty, Satya Sundar (2020) Herbicide Bioremediation Using Hyperbutachlor Tolerant Microorganisms in Batch and Continuous Systems. PhD thesis.
Mahato, Nisha Rani (2020) Static and Dynamic Analysis of Imprecisely Defined Systems with Uncertain Parameters. PhD thesis.
Mishra, Biraja Prasad (2019) NURBS-Augmented Finite Element Method for Static, Dynamic and Stability Analyses of Arbitrary Stiffened Plates. PhD thesis.
Naik, Shrikanta (2005) Studies on Pollution Status of Bondamunda Area of Rourkela Industrial Complex. PhD thesis.
Nayak, B B (2006) Magnetic Nanocomposite Material. PhD thesis.
Nayak, Yougojoti (2010) Hydroxyapatite – TZP Composites: Processing, Mechanical Properties,Microstructure and in Vitro Bioactivity. PhD thesis.
Nayak, Jyoti Prakash (2010) Preparation and Characterization of Bioactive Silica-Based Ceramics Derived from Rice Husk Ash. PhD thesis.
Naik, H (2013) Evaluation of flow and in-place strength characteristics of fly ash composite materials. PhD thesis.
Nanda, Santosh Kumar (2012) Noise Impact Assessment and Prediction in Mines
Nayak, Priyadarshini (2013) Development of high surface area ceriaand titania modified mesoporous zirconia with tetragonal nanocrystalline framework for novel applications. PhD thesis.
Nayak, Santosh Kumar (2013) Seismic Response of Partially Filled Rectangular Liquid Tank With Internal Objects. PhD thesis.
Natarajamani, S (2014) Some studies on designs of planar antennas for UWB applications. PhD thesis.
Nayak, Nirlipta Priyadarshini (2015) Characterisation driven processing of Indian sub-marginal grade of iron ore for value addition. PhD thesis.
Narne, Rajendraprasad (2015) Enhancement of Power System Dynamic Performance by Coordinated Design of PSS and FACTS Damping Controllers. PhD thesis.
Nayak, Sukanta (2015) Numerical Solution of Some Uncertain Diffusion Problems. PhD thesis.
Nimaje, Devidas S (2015) Development of Mathematical Models for the Assessment of Fire Risk of Some Indian Coals using Soft Computing Techniques. PhD thesis.
Nayak, Bijaya Bijeta (2015) Parametric Optimization of Taper Cutting Process using Wire Electrical Discharge Machining (WEDM). PhD thesis.
Nayak, Saudamini (2016) Some Studies on Infinite-Dimensional Lie(Super) Algebra. PhD thesis.
Nuthalapati , Mohan (2016) Development of Nano-Tio2/Y2O3 Dispersed Zirconium Alloys By Mechanical Alloying Followed By Conventional and Spark Plasma Sintering. PhD thesis.
Nayak, Bibhukalyan Prasad (2016) Analysis and Quantification of Physical Fatigue in Automobile Drivers: A Biomedical Approach. PhD thesis.
Nayak, Antarjeeta (2016) Understanding the Perceived Causes of Poverty and Quality of Life: A Study of Rourkela City. PhD thesis.
Nanda, Umakanta (2016) Design Techniques of Energy Efficient PLL for Enhanced Noise and Lock Performance. PhD thesis.
Nayak, Tanaya (2016) Impact of Quality of Work Life on Turnover Intention: A Study on Private Health Care Units in Odisha. PhD thesis.
Nayak, Nadiya Bihary (2017) Borohydride Synthesis for Development of Porous Zirconium Oxide Nanopowders for Novel Applications. PhD thesis.
Naik, Bandita (2016) Flow Analysis of Compound Channels With Converging Floodplains. PhD thesis.
Nayak, Priyambada (2017) Synthesis and Characterization of Homovalent and Heterovalent Substituted Strontium Bismuth Titanate Ceramic. PhD thesis.
Nayak, Debasish (2017) Novel Techniques for SRAM Based Memory Performance Enhancement. PhD thesis.
Nanda, Aparajita (2017) Towards Mitigating Visual Ambiguity in Person Re-Identification. PhD thesis.
Nigam, Shrutee (2017) Copper Deposition on RP Parts: An Experimental Investigation. PhD thesis.
Nayak, Rajashree (2017) Development of Efficient Methodologies for Image Super-Resolution Reconstruction. PhD thesis.
Nayak, Dinesh Kumar (2018) C-N and C-O Bond Formation Reactions: Synthesis of N-Aryl Amides, Benzoxazoles and 3(2H)-Furanones. PhD thesis.
Nayak, Radharani (2019) Teaching English to Rural High-School Students in India: Identifying and Addressing the Challenges. PhD thesis.
Naik, Prajna Paramita (2019) Protective Autophagy in Inducing Stemness and
Naik, Deepak Kumar (2019) Investigation and Optimization of Plasma Arc Cutting Process. PhD thesis.
Nayak, Parth Sarathi (2019) Nanoparticle Functionalization: Implications in Corona-Modulated Biological Applications. PhD thesis.
Nagamani, Nadiminti (2019) Estimating Quantiles and Common Parameter in Certain Stochastic Models. PhD thesis.
Nayak, Deepak Ranjan (2019) Towards Designing Improved Pathological Brain Detection System
Ota, Radheshyam (2009) Kan Extension. PhD thesis.
Ojha, Shakuntala (2015) Investigation in to Mechanical and Tribological Behavior of Biomass Based Carbon Black Filled Epoxy Composite. PhD thesis.
Ogeti, Pedda Suresh (2016) Robust Active and Reactive Power Control Schemes for a Doubly Fed Induction Generator Based Wind Energy Conversion System. PhD thesis.
Obaiah, Maddela Chinna (2019) Wide-Area Damping Controllers for Power System with Time Delays and Actuator Saturation. PhD thesis.
Patra, D (2005) Brain MR Image Segmentation Using Markov Random Field Model and Tabu Search Strategy. PhD thesis.
Pradhan, Saroj Kumar (2007) Navigation Techniques for Control of Multiple Mobile Robots. PhD thesis.
Paria, S (2003) Studies on Surfactant Adsorption at the Cellulose-Water Interface. PhD thesis.
Prasad, Naresh (2006) Development and Characterization of Metal Matrix Composite Using Red Mud an Industrial Waste for Wear Resistant Applications. PhD thesis.
Patle, Sewan Das (2006) Analysis and Measurement of Thermophysical Properties by Temperature Oscilation. PhD thesis.
Patnaik, Amar (2008) Development, Characterization and Solid Particle Erosion Response of Polyester based Hybrid Composites. PhD thesis.
Padhi, Saroj Kumar (2010) Preparation and Characterization of Biodiesel from Non-Edible Oils. PhD thesis.
Pradhan, Mohan Kumar (2010) Experimental Investigation and Modelling of Surface Integrity, Accuracy and Productivity Aspects in EDM of AISI D2 Steel. PhD thesis.
Panigrahi, Manas Ranjan (2010) On the Structure and Dielectric Study of Iso- and Alio-Valent Modified BaTiO3 Ceramics. PhD thesis.
Pattnaik, Swapnajit (2011) Development of Improved Performance Switchmode Converters for Critical Load Applications. PhD thesis.
Panda, Achyut Kumar (2011) Studies on process optimization for production of liquid fuels from waste plastics. PhD thesis.
Padhi,, Biranchi Narayana (2012) Thermal modeling of short pulse collimated radiation in a participating medium”. PhD thesis.
Panigrahi, Trilochan (2012) On the Development of Distributed Estimation
Panigrahi, Trilochan (2012) On the Development of Distributed Estimation
Patra, Laxmi Narayan (2012) 3D Analysis of Combined Extrusion-Forging Processes. PhD thesis.
Palei, Prakash Kumar (2012) Structural And Electrical Properties Of Conventional And Microwave Processed Lead Free KNN Based Ceramics. PhD thesis.
Patra, Annapurna (2012) MACROMOLECULAR STRUCTURE OF SISAL FIBER AND ITS POTENTIAL APPLICATIONS. PhD thesis.
Pradhan, R (2014) Development of new parameter extraction schemes and maximum power point controllers for photovoltaic power systems. PhD thesis.
Pradhan, Santanu Kumar (2013) Development of New Adaptive Control Strategies for a Two-Link Flexible Manipulator. PhD thesis.
Parija, Bishwanath (2012) Study Of Structural, Electrical And Optical Properties Of Lead-Free (Bi0.5na0.5)Tio3 Based Ceramic Systems. PhD thesis.
Parida, Pramod Kumar (2013) Kinematic Analysis of Multi-Fingered, Anthropomorphic Robotic Hands. PhD thesis.
Pasayat, Sagarika (2013) Chemistry of Oxomolybdenum Complexes with ON- and ONO- Donor Ligands. PhD thesis.
Patel, Sumanta Kumar (2013) Synthesis, characterization and reactivity of transition metal clusters and their role towards organic transformation. PhD thesis.
Prakash, R (2013) Experimental Studies on a DI Diesel Engine Fueled with Jatropha Methyl Ester-Wood Pyrolysis Oil Emulsions. PhD thesis.
Panda, Niladri nath (2014) Development of electrospun nanofibrous silk fibroin based scaffolds for bone tissue engineering. PhD thesis.
Patra, Ashrita (2014) Study of reactor constitutive model and analysis of nuclear reactor kinetics by fractional calculus approach. PhD thesis.
Pothal, Jayanta Kumar (2014) Intelligent motion planning and obstacle avoidance for multiple mobile robots in highly cluttered environments. PhD thesis.
Panda, Meenakshi (2015) Distributed Self Fault Diagnosis in Wireless Sensor Networks using Statistical Methods. PhD thesis.
Pati, Pravat Ranjan (2015) A Study on Utilization of LD Slag in Erosion Resistant Coatings and Polymer Composites. PhD thesis.
Parida, Geetanjali (2015) Synthesis and Characterization of Intergrowth Bismuth Layered Structure Ferroelectrics in the System SrO-Bi2O3-TiO2. PhD thesis.
Pradhan, Karan Kumar (2015) Numerical Solution of Static and Dynamic Problems of Functionally Graded Structural Members. PhD thesis.
Panigrahi, Rakhee (2015) Development of Robust Control Schemes with New Estimation Algorithms for Shunt Active Power Filter. PhD thesis.
Patjoshi, Rajesh Kumar (2015) Design and Development of Advanced Control strategies for Power Quality Enhancement at Distribution Level. PhD thesis.
Patel, Bhishma (2015) Microbial Degradation of Chlorophenols in Batch and Continuous Bioreactors: Kinetic Study and Optimization of Process Parameters. PhD thesis.
Panda, Ranjit Kumar (2016) Studies on Electric and Magnetic Properties of Cobalt Ferrite and its Modified Systems. PhD thesis.
Parida, Priyadarshini (2015) Electronic and Magnetic Properties of Rough Surfaces of Transition Metals (Fe, Co and Ni) and Their Alloyed Interfaces with Metal (Ag, Cu and Au) Substrates. PhD thesis.
Panda, Himanshu Sekhar (2016) Vibration, Buckling and Parametric Instability of Delaminated Composite Panels in Hygrothermal Environment. PhD thesis.
Panda, Subhrakanta (2016) Regression Testing of Object-Oriented Software based on Program Slicing. PhD thesis.
Patnaik, Sushree Sangita (2015) Performance Enhancement of Shunt APFs Using Various Topologies, Control Schemes and Optimization Techniques. PhD thesis.
Panda, Akshaya Kumar (2016) Some Variants of the Balancing Sequence. PhD thesis.
Pradhan, Prasanta Kumar (2016) On Efficient Signal Processing Algorithms for Signal Detection and PAPR Reduction in OFDM Systems. PhD thesis.
Pandey, Anish (2016) Mobile Robot Navigation in Static and Dynamic Environments using Various Soft Computing Techniques. PhD thesis.
Patle, Bhumeshwar Kunjilal (2016) Intelligent Navigational Strategies For Multiple Wheeled Mobile Robots Using Artificial Hybrid Methodologies. PhD thesis.
Potnuru, Srikar (2016) Numerical, Analytical and Experimental Analysis of Combined Extrusion Forging Processes Applied to Collet Chuck Holders. PhD thesis.
Panda, Surjyakant (2016) Recrystallization Textures in HCP Metals. PhD thesis.
Panigrahi, Niranjan (2016) Consensus-based Time Synchronization Algorithms for Wireless Sensor Networks with Topological Optimization Strategies for Performance Improvement. PhD thesis.
Pradhan, Smita (2016) Development of Efficient Intensity Based Registration Techniques for Multi-modal Brain Images. PhD thesis.
Pradhan, Kumar Prasannajit (2017) Exploration of Novel Attributes of Hybrid FinFETs towards Analog/RF and Reliability Aspects. PhD thesis.
Parida, Asit Kumar (2017) Heat Assisted Machining of Nickel Base Alloys: Experimental and Numerical Analysis. PhD thesis.
Panda, Prashanta Kumar (2017) Autophagy Dependent Cell Death, Senescence and Differentiation by Abrus Agglutinin in Cancer Therapeutics. PhD thesis.
Patel, Ranjeeta (2017) Interleaved Buck Converter Based Shunt Active Power Filter with Shoot-through Elimination for Power Quality Improvement. PhD thesis.
Pattanaik, Ashutosh (2017) Effect of Processing Conditions on Properties of Fly ash-Epoxy Composite. PhD thesis.
Panda, Sukanya (2017) Effects of Organizational Capabilities on Organizational Performance: Empirical Evidences from Indian Banking Industry. PhD thesis.
Pradhan, Debalaxmi (2017) Experimental Studies on Co-pyrolysis of Biomass and Plastic Waste. PhD thesis.
Pradhan, Swastik (2017) Investigation of Machinability of Titanium Alloy (Grade 5): Experimental and Numerical Analysis. PhD thesis.
Prusty, Rajesh Kumar (2017) Implication of CNT Fillers on Environmental Durability of GFRP Composites: An Evaluation of Microstructural Features and Mechanical Properties. PhD thesis.
Patra, Anshuman (2017) Fabrication of Nano-Y2O3 Dispersed Tungsten Alloys by Mechanical Alloying Followed by Conventional and Spark Plasma Sintering. PhD thesis.
Patnaik, Nishant (2017) Investigation on Performance Improvement & Efficient Utilization of Unified Power Quality Conditioner. PhD thesis.
Parija , Smita Rani (2017) Investigations on Location Prediction and Resource Management of Cellular Network. PhD thesis.
Panthi, Vikas (2017) Generation and Prioritization of Test Scenarios for Object-Oriented Software using UML State Machines. PhD thesis.
Prusty, Sankata Bhanjan (2017) Design and Development of Efficient Control Strategies for Liquid Level Tank Systems. PhD thesis.
Patel, Shabna (2017) Functionalized Electrospun Polyacrylonitrile (PAN)anofibers: Synthesis, Characterization and Environmental Applications. PhD thesis.
Patel, Sucharita (2018) Development of Adsorption Media by Using Industrial Waste: Red Mud for the Removal of As (V) Ions from Water. PhD thesis.
Pradhan, Sagnika (2018) Catalytic Applications of Surface and Structurally Modified Zirconia Nanoparticles for Synthesis of Biologically Important Molecules. PhD thesis.
Patra, Jyoti Prasanna (2018) Signal Detection and Channel Estimation for Space-Time Block Coded Mobile Communication Systems. PhD thesis.
Panda, Sunita (2018) Organisational Efforts towards Effective Executive Talent Management: An Analytical Study. PhD thesis.
Patnaik, Yogananda (2017) Development of Efficient Scalable Video Compression Schemes for H.264/SVC Platform. PhD thesis.
Patnaik, Prabina Kumar (2018) Processing, Characterization and Slurry Abrasion Wear Behaviour of Needle-Punched Nonwoven Fabric Reinforced Polymer Composites. PhD thesis.
Patel, Ashok Kumar (2018) Development of an Online Vision Based Integrated Quality Monitoring Model for Mineral Industry. PhD thesis.
Pandey, Achala (2017) Development of Efficient Algorithms for Seamless Image Mosaicing. PhD thesis.
Padhee, Subhransu (2018) Topology, Modeling and Control Aspects of DC-DC Converter for an Off-Grid Operated Fuel Cell Power System Perspective. PhD thesis.
Panda, Saleema (2018) Nonlinear Finite Element Static and Dynamic Analyses of Stiffened Plates. PhD thesis.
Patel, Bhakti (2018) Identification of Immunoglobulin IgZ and IgM and the Role of Innate Immune Signaling on their Synthesis in Catla Catla. PhD thesis.
Parveen, Rasheda (2018) Religion and Sexuality: A Study of Select Indian English Poets. PhD thesis.
Parhi, Bikash Ranjan (2018) Reduction of Bauxite through Hydrogen: Future Method of Extraction of Aluminium. PhD thesis.
Parida, Jayashree (2018) Rural Livelihoods, Adaptation and Disaster Risk Governance: Understanding Flood-Induced Vulnerability in Coastal Odisha, India. PhD thesis.
Patnaik, Ashish Kumar (2018) Entry Capacity Modelling of Roundabouts under Heterogeneous Traffic Flow Conditions. PhD thesis.
Pattanayak, Ranjit (2018) Study of Grain Size Effect on Microstructural Conduction Mechanism and Multiferroism of Na0.5Bi0.5TiO3-BaFe12O19 Particulate Composites. PhD thesis.
Penthia, Trilochan (2018) Performance Analysis and Application of Superconducting Magnetic Energy Storage in a Power System. PhD thesis.
Purohit, Abhilash (2018) Processing and Tribo-Performance Analysis of Polymer Composites Filled with Linz-Donawitz Sludge. PhD thesis.
Parida, Smita (2018) On the Linear and Nonlinear Free Vibration of Functionally Graded Material Plates in the Thermal Environment. PhD thesis.
Panigrahy, Damodar (2018) Extraction of Fetal ECG Signal from the Single Channel Abdominal ECG Signal Recording. PhD thesis.
Parida, Ananya (2018) Between Rebellion and Resistance: A Study of Select Andaman Penal Narratives. PhD thesis.
Purbia, Rahul (2018) Sustainable Synthesis of Multifunctional Nanomaterials for Sensing and Catalytic Applications. PhD thesis.
Pradhan, Dillip Kumar (2019) On Maximal Monotone Operators and the Sum Problem in General Banach Spaces. PhD thesis.
Panigrahy, Saroj Kumar (2019) Human Stress Analysis using Physiological Signals from Wireless Healthcare Sensor Network. PhD thesis.
Panigrahi, Aradhana (2019) Positive Health Aspects Influencing Health Management Skills: A Study on Type 2 Diabetes Mellitus Patients. PhD thesis.
Panda, Shilpi Smita (2019) Brick Kiln Workers from Rural Odisha, India: An Analytical Study of Seasonal Migration. PhD thesis.
Panda, Deepak Kumar (2018) Development of Dynamic Background Subtraction Algorithms for Visual Surveillance Applications. PhD thesis.
Priyadarshi, Deepayan (2019) Biodiesel Production From Waste Materials: Process Development and Performance Evaluation. PhD thesis.
Pattnaik, Binaya Kumar (2017) Geochemistry of water, soil and sediment with special reference to hexavalent chromium at the sukinda ultramafic complex, India. PhD thesis.
Pani, Aparupa (2019) In-Situ Stabilization of Sedimented Ash Deposits by Chemical Columns. PhD thesis.
Panigrahi, Susant Kumar (2019) Image Denoising by Edge Preserved Curvelet Thresholding. PhD thesis.
Pujari , Jyoti Prakash (2019) Between Home and Exile:Locating Memsahibs’ Texts in British India. PhD thesis.
Pradhan, Arpan (2019) Stage-Discharge Modelling of Meandering Compound Channels with
Paul, Sourabh (2019) Development of Efficient Registration Algorithms for Remote Sensing Optical and SAR Images. PhD thesis.
Padhi, Tapaswini (2019) Development of New Environment Friendly Adsorption Media for the Removal of Hazardous Anions from Water. PhD thesis.
Pradhan, Bibhuti Bhusan (2019) Distributed MIMO Systems with ZF Detectors in Rayleigh-Inverse Gaussian Composite Fading Channels. PhD thesis.
Prasad, Elluri Venkata (2019) Vibration, buckling and dynamic stability of fiber metal laminated plates. PhD thesis.
Panda, Ansumalini (2019) Impact of Work-life Balance on Employee Retention: The Mediation and Moderation Effect of Employee Commitment, Psychological Empowerment and Organizational Citizenship Behaviour. PhD thesis.
Pradhan, Diana (2019) Evolutionary Adaptations and Host Immune Modulation by Salmonella Typhimurium. PhD thesis.
Pandit, Amiya Ranjan (2019) Seismic Response of Partially Filled Sloped Bottom Container and Tuned Liquid Damper for Vibration Control. PhD thesis.
Rout, S K (2006) Phase Formation and Dielectric Studies of Some Based Perovskite System. PhD thesis.
Roy, Pradip Kumar (2009) Influence of substitutions and Sintering Aids on Structural and Electromagnetic Properties of NiCuZn Ferrite. PhD thesis.
Roy, G K (1974) Studies on Certain Aspects of Semi- Fluidization. PhD thesis.
Ray, Prasanta Kumar (2009) Balancing and Cobalancing Numbers. PhD thesis.
Rana, Raghunath Prasad (2009) Powder Processing, Densification Behaviour, Microstructure and Mechanical Properties of Al2o3- 50 vol% zro2 Composites. PhD thesis.
Ray , Pravat Kumar (2011) Signal Processing and Soft Computing Approaches to Power Signal Frequency and Harmonics Estimation. PhD thesis.
Rout, Akshaya Kumar (2010) A Class of Solutions for Extrusion through Converging Dies. PhD thesis.
Rath, Manoj Kumar (2012) Dynamic Instability of Laminated Composite Curved Panels in Hygrothermal Environment. PhD thesis.
Ray, Mitrabinda (2012) Prioritizing Program Elements: A Pre-testing Eﬀort
Rout, Trilochan (2012) On The Dynamic Stability of Functionally Graded Material Beams Under Parametric Excitation. PhD thesis.
Rup, Suvendu (2013) Intra-Key-Frame Coding and Side Information Generation Schemes in Distributed Video Coding. PhD thesis.
Ray, Niranjan Kumar (2013) Techniques to enhance the lifetime of mobile ad hoc networks. PhD thesis.
Rout, Prakash Kumar (2015) Fast and Robust Design of CMOS VCO for Optimal Performance. PhD thesis.
Rout, Sudhansu Sekhar (2015) Some Generalizations and Properties of Balancing Numbers. PhD thesis.
Rawat, Chandan Singh D (2015) Development of Some Efficient Lossless and Lossy Hybrid Image Compression Schemes. PhD thesis.
Ray, Jashashree (2015) Magnetic and Dielectric Studies on Cobalt Substituted BiFeO3. PhD thesis.
Rout, Sarat Kumar (2015) Synthesis, Electrical and Electrochemical Behavior of Lanthanum Strontium Cobalt Ferrite for SOFC Cathode Application. PhD thesis.
Rout, Sachindra Kumar (2015) Design and Analysis of Pulse Tube Refrigerator. PhD thesis.
Rout, Smruti Ranjan (2015) Design of Multifunctional Magnetic Nanostructures for
Reddy , Bhimavarapu Sambi (2016) Zirconia Toughened Alumina Femoral Head and Acetabular Socket: Process optimization, Designing, Fabrication and Properties. PhD thesis.
Ram, Deo Karan (2016) Experimental and Computational Studies on Fluidized Bed Biomass Gasifier for Production of Clean Energy. PhD thesis.
Ramesh, Tejavathu (2016) Investigations on Direct Torque and Flux Control of Speed Sensorless Induction Motor Drive. PhD thesis.
Rajasekhar, M (2016) Dynamic Analysis, Identification and Control Studies of Aero-Engine Model Rotor-Bearing Systems. PhD thesis.
Rauta, Pradipta Ranjan (2016) Immunological Evaluation of Biodegradable Particle Based Nanoparticles Encapsulating OMP Antigen as Potential Vaccine Candidate. PhD thesis.
Ray, Sirsendu Sekhar (2016) Cryopreservation Strategy for Adipose Tissue and Adipose Tissue Derived Stem Cells by Developing Non-Toxic Freezing Solutions. PhD thesis.
Routaray, Mitali (2016) On Adams Completion and Cocompletion. PhD thesis.
Roy, Satabdi (2017) Chemistry of Transition Metal Complexes with O- and/or N- Donor Ligands: Synthesis, Characterization and Study of Reactivity. PhD thesis.
Ramajayam, Krishna Kumar (2017) An Approach to Improving Efficacy of Cryosurgery: Numerical and Experimental (Using Gel Phantoms) Studies. PhD thesis.
Rahul, (2017) Experimental Studies on Machinability of Inconel Super Alloy during Electro-Discharge Machining: Emphasis on Surface Integrity and Metallurgical Characteristics of the EDMed Work Surface. PhD thesis.
Rout, Jitendra Kumar (2018) Detection of Deceptive Online Reviews using Machine Learning Techniques. PhD thesis.
Rao D., Srinivas (2018) Development of Soft Computing Models for Noise Prediction in Opencast Mines. PhD thesis.
Reddy, K. Guru Raghavendra (2018) Development of Image Processing and Neuro-Fuzzy Based System for Ore Sorting in Mining Industry. PhD thesis.
Rout, Nilendri (2019) Solving Molecular Complexities with Oxidative Dearomatisation and Transition Metal Catalysis. PhD thesis.
Rana , Sandeep Singh (2019) Design, Development and Testing of a Peeler Cum Cutter Machine for Tender Jackfruit. PhD thesis.
Roy, Jyoti (2019) Regulatory Non-Coding RNAs as Cellular Rheostats: Modulating Biological Functions to Pathophysiology of Diseases. PhD thesis.
Raman, Rahul (2019) Pedestrian Walk Direction Estimation for Smart Surveillance. PhD thesis.
Rakshit, Manas (2019) Development of Some Efficient Schemes for ECG Signal Quality Assessment and Processing. PhD thesis.
Ravi, Kreethi (2019) Ratcheting Behaviour of 42CrMo4 Steel under Different Heat Treatment Conditions. PhD thesis.
Sudhakarapandian, R (2007) Application of Soft Computing Techniques for Cell Formation Considering Operational Time and Sequence. PhD thesis.
Samantaray, S R (2007) A New Approach to Power System Protection using Time-frequency Analysis and Pattern Recognition. PhD thesis.
Sarkar, D (2007) Synthesis and Thermo-Mechanical Properties of Sol-Gel Derived Zirconia Toughened Alumina Nanocomposite. PhD thesis.
Sarangi, S K (2006) Experimental and Computational Studies on Oil Injected Twin-Screw Compressor. PhD thesis.
Satapathy, Alok (2005) Thermal Spray Coating of Redmud on Metals. PhD thesis.
Singh, Mukesh Kumar (2009) Navigational Path Analysis of Mobile Robot in Various Environments. PhD thesis.
Sa, Pankaj Kumar (2010) Restoration Algorithms for Blurred and Noisy Images. PhD thesis.
Sahu, Ramesh Chandra (2011) Neutralization of Red Mud Using CO2 Sequestration and their Utilizations. PhD thesis.
Sood, Anoop Kumar (2011) Study on Parametric Optimization of Fused Deposition Modelling (FDM) Process. PhD thesis.
Sahu, Sitanshu Sekhar (2011) Analysis of Genomic and Proteomic Signals Using Signal Processing and Soft Computing Techniques. PhD thesis.
Sahoo, Ajit Kumar (2012) Development of Radar Pulse Compression Techniques Using
Singh, Anjuvan (2010) Chemical synthesis and development of porous hydroxyapatite from snail shell and its study of biocompatibility. PhD thesis.
Sasidharan, Priya (2012) A Needs Based Approach to Teaching and Learning of
Sahu, Niranjan (2011) Study of Crystal Structure and Electrical Properties on Lead Titanate and Lead Zirconate Titanate Based Ceramic Oxides. PhD thesis.
Samantaray , Satish (2012) Physicochemical Characterization and Catalytic Application of Nanocomposite Oxides and Clay Based Nanoporous Materials for Synthesis of Some Biologically Important Molecules. PhD thesis.
Sahoo, B (2013) Dynamic load balancing strategies in heterogeneous distributed system. PhD thesis.
Shahida, . (2012) Issues in Leadership: A Study of Select Shakespearean
Swain, Sanjaya Kumar (2013) Hydroxyapatite Nanoparticles and Nanobiocomposite Scaffold for
Sah, Mahesh Kumar (2013) Development of Silk based Bio-polymeric Porous Matrices for Tissue Engineering Applications. PhD thesis.
Senapati, Ranjan Kumar (2012) Development of Novel Image Compression Algorithms for Portable Multimedia Applications. PhD thesis.
Siddiqui M.A, Nadeem (2014) Development of chitosan based composite matrices for Bone tissue engineering. PhD thesis.
Sahoo, Manmath Narayan (2014) Design and Evaluation of Online Fault Diagnosis Protocols forwireless Networks. PhD thesis.
Singh, Manas Ranjan (2014) A study on flexible flow shop and job shop scheduling using meta-heuristic approaches. PhD thesis.
Samantarai, Shakti Prasad (2014) Tribological behaviour of rice husk reinforced polymer matrix composite. PhD thesis.
Sheeja, K L (2014) Composite right/left handed antennas for wireless lan applications. PhD thesis.
Sagiri, Sai Sateesh (2014) Studies on the Synthesis and Characterization of Encapsulated Organogels for Controlled Drug Delivery Applications. PhD thesis.
Sethi, Sanghamitra (2014) Environmental Degradation Study of FRP Composites Through Evaluation of Mechanical Properties. PhD thesis.
Sahu, Swagatika (2015) Design of Luminescent Magnetic Nanostructures for Sensor, Drug Delivery and Bioimaging Applications. PhD thesis.
Sahoo, Ganesh Kumar (2015) Synthesis and Characterization of Zr and Ca modified BaTiO3 Ferroelectric Ceramics. PhD thesis.
Sahu, Basant Kumar (2015) Development of Path Following and Cooperative Motion Control Algorithms for Autonomous Underwater Vehicles. PhD thesis.
Sahoo, Mousumibala (2015) Study of Structure and Electrical Transport Property in Composite and Doped Systems of YBa2Cu3O7-δ Superconductor. PhD thesis.
Suresh, Yeresime (2015) Software Fault Prediction and Test Data Generation Using Articial Intelligent Techniques. PhD thesis.
Sahoo, Upendra Kumar (2015) Distributed Estimation in Wireless Sensor Networks: Robust Nonparametric and Energy Efficient Environment Monitoring. PhD thesis.
Samantra, Chitrasen (2015) Studies on Risk and Occupational Health Hazards in Industrial Context: Some Case Research. PhD thesis.
Sahu, Anoop Kumar (2015) Supply Chain Performance Appraisement and Benchmarking for Manufacturing Industries: Emphasis on Traditional, Green, Flexible and Resilient Supply Chain along with Supplier Selection. PhD thesis.
Sharma, Suraj (2016) On Energy Efficient Routing Protocols for Wireless Sensor Networks. PhD thesis.
Sarma D, Srinivasa V S (2015) Design and Implementation of Novel High Performance Domino Logic. PhD thesis.
Sahoo, Kalpana (2016) Foreign Aid and Economic Development: Empirical Evidence from Select South Asian Economies. PhD thesis.
Sekhar, Pudi (2016) Assessment and Enhancement of Power System Security using Soft Computing and Data Mining Approaches. PhD thesis.
Swain, Sridevi (2016) Synthesis and Characterizations of SrBi2Ta2O9 Modified NBT-BT and NBT-KNN Ferroelectric Ceramics near Morphotropic Phase Boundary. PhD thesis.
Shashanka , R (2016) Fabrication of Nano-Structured Duplex and Ferritic Stainless Steel by Planetary Milling Followed by Consolidation. PhD thesis.
Sahoo, Sumanta Kumar (2017) Electrochemically Controlled Synthesis of Few-Layer Graphene Nanosheets and its Evaluation for Applications. PhD thesis.
Sahu, Pradeep Kumar (2016) Sliding Mode Control of Photovoltaic Energy Conversion Systems. PhD thesis.
Satapathy, Shashank Mouli (2016) Effort Estimation Methods in Software Development Using Machine Learning Algorithms. PhD thesis.
Shilpi, Arunima (2016) Profiling of DNA Methylation and Single Nucleotide Polymorphism for Diagnosis, Prognosis and Targeting DNA Methyltransferases for Therapeutic Intervention of Breast Cancer. PhD thesis.
Sahu, Shitarashmi (2016) Conversion of Cotton Gin Waste to Bioethanol: Pretreatment, Hydrolysis and Fermentation. PhD thesis.
Swain, Susanta Kumar (2015) Property Development in As-Cast Heavy Section SG Iron Castings by Alloying with Nickel and Copper. PhD thesis.
Sahu, Sasmita (2016) Inspection and Monitoring of Structural Damage Using Vibration Signatures and Smart Techniques. PhD thesis.
Singh, Jagannath (2016) Slicing of Aspect-Oriented Software and Its Application to Software Refactoring. PhD thesis.
Singh, Bhisham Narayan (2017) Development of Novel Silk Fibroin/Carboxymethyl Cellulose Based Electrospun Nanofibrous Scaffolds for Bone Tissue Engineering Application. PhD thesis.
Singh, Amiya (2016) Hierarchy Based Construction of Signature Matrices for Simplified Decoding in Overloaded CDMA. PhD thesis.
Singh, Deepak (2016) Fast and Efficient Foveated Video Compression Schemes for H.264/AVC Platform. PhD thesis.
Sahoo, Kirtikanta (2016) Studies on Concrete Made of Recycled Materials for Sustainability. PhD thesis.
Singh, Gaurav (2016) Phase Transfer Catalyzed Synthesis of Organosulfur Fine Chemicals using Hydrogen Sulfide. PhD thesis.
Sahu, Prakash Kumar (2016) Numerical Approximate Methods for Solving Linear and Nonlinear Integral Equations. PhD thesis.
Shaik, Jakeer Hussain (2017) Studies on Design of Spindle-tool System and Their Effects on Overall Milling Process Stability. PhD thesis.
Samantarrai, Devyani (2017) Investigating The Microrna-Mediated Target Regulations Associated with Metastasis of Cancer:Special Focus on Soft Tissue Sarcoma and Breast Carcinoma. PhD thesis.
Sahu, Shitarashmi (2016) Conversion of Cotton Gin Waste to Bioethanol: Pretreatment, Hydrolysis and Fermentation. PhD thesis.
Satpathy, Mantra Prasad (2017) Ultrasonic Spot Welding of Dissimilar Metal Sheets: An Experimental, Numerical and Metallurgical Investigation. PhD thesis.
Sinha, Niharika (2017) Mechanism of Tumor Inhibitory Potential of Abrus Agglutinin in Oral Squamous Cell Carcinoma. PhD thesis.
Sharma, Abhishek (2017) Investigations of a Direct Injection Diesel Engine Run on Non Petroleum Fuel Blends. PhD thesis.
Sahoo, Chinmaya Kumar (2017) Development of TiC Based Wear Resistance Composite Coating on AISI 304 Steel by Pulsed Laser and TIG Cladding Process. PhD thesis.
Sahani, Pankajini (2017) Fabrication of SiC-B4C–Si and SiC-B4C–Al Cermets by Powder Metallurgy Route. PhD thesis.
Singh, Munesh (2016) Geometric Constraint Based Range Free Localization Scheme For Wireless Sensor Networks (WSNs). PhD thesis.
Saramekala, Gopi Krishna (2017) Modeling and Simulation of Subthreshold Characteristics of Short-Channel Fully-Depleted Recessed-Source/Drain SOI MOSFETs. PhD thesis.
Singh, Akhilesh Kr. (2017) Study on The Effect of Different Sols on High Alumina Castable Refractory. PhD thesis.
Sen, Dilip Kumar (2017) Analysis of Decision Support Systems of Industrial Relevance: Application Potential of Fuzzy and Grey Set Theories. PhD thesis.
Singh, Mangal (2017) On PAPR Reduction of OFDM using Partial Transmit Sequence with Intelligent Optimization Algorithms. PhD thesis.
Sahu, Manoj Kumar (2017) Studies on the utilization of red mud for environmental application. PhD thesis.
Sahu, Om Prakash (2017) Design and Development of Sensor Integrated Robotic Hand. PhD thesis.
Sanam, Joseph (2017) Planning and Operation of DSTATCOM in Electrical Distribution Systems. PhD thesis.
Sahoo, Deepti Moyi (2017) Interval and Fuzzy Computing in Neural Network for System Identification Problems. PhD thesis.
Samal, Padarbinda (2017) Planning of Unbalanced Radial Distribution Systems with Reactive and Distributed Energy Sources Using Evolutionary Computing Techniques. PhD thesis.
Swain, Sushree Diptimayee (2017) Design and Experimental Realization of Robust and Adaptive Control Schemes for Hybrid Series Active Power Filter. PhD thesis.
Sahu , Gokulananda (2017) Design and Development of FPGA Based Controllers for DSTATCOM in Grid Connected Power System. PhD thesis.
Sahu, Vaneshwar Kumar (2017) Modelling and Prediction of Fatigue Crack Growth in Part-Through Cracked Pipes under Bending Load. PhD thesis.
Sahani, Rima (2017) Level of Service Criteria for Pedestrian Facilities in Urban Indian Context. PhD thesis.
Srivastava , Shubham (2017) Borohydride Synthesis for Development of Rare Earth Doped and Co-Doped Yttrium Borate Phosphors for Luminescent Applications. PhD thesis.
Swain, Janaki Ballav (2018) Streamflow Estimation in Ungauged Catchments through the Process of Regionalization. PhD thesis.
Swain, Priyadarshi Tapas Ranjan (2018) Mechanical, Thermal and Tribological Behaviour of Surface Modified Jute Fiber Reinforced Epoxy Composites. PhD thesis.
Saha, Sunirmal (2017) Investigation of Mechanical, Thermal and Electrical Properties of Various Carbon Nanofillers Incorporated Epoxy Composites for Marine Applications-A Comparative Study. PhD thesis.
Sahoo, Subhadarshan (2018) The Novel Analytical Methods for the Solutions of Generalized-fractional Order Differential Equations Arising in Physical Models. PhD thesis.
Singh, Vinay Kumar (2018) Development and Characterization of Sesame Oil Based Formulations for Controlled Drug Delivery. PhD thesis.
Swain, Ashirbad (2018) Viscoelastic Modelling and Dynamic Analysis of CNT-based Composite Shell Panels. PhD thesis.
Sahu, Chinmaya (2018) Navigational Analysis of Artificial Intelligence based Control Strategy for Humanoid Robot. PhD thesis.
Sahoo, Moumita (2018) Development of synbiotic functional food using potential probiotic isolates with soymilk and mushroom extracts as prebiotics. PhD thesis.
Sahoo, Sauvagya Ranjan (2019) Hardware Security: Addressing challenges through PUF and recycled IC detection. PhD thesis.
Sahoo, Mrunmayee Manjari (2018) An Integrated Hydrologic Bayesian Multi-Model Framework for Water Quality and Nutrient Analysis. PhD thesis.
Shakti, Deepti (2018) Uniformly Convergent Numerical Methodsfor Singularly Perturbed Initial and Boundary Value Problems. PhD thesis.
Sahoo, Madhulika (2018) Reproductive Healthcare Rights, Practices and Challenges among the Displaced Tribal Communities in India. PhD thesis.
Sahu, Uttam Kumar (2018) Environmental friendly iron oxide based magnetic nanomaterials : Synthesis, characterization and application for arsenic removal. PhD thesis.
Sahoo , Bibhuti Bhusan (2018) Buckling, Vibration and Dynamic Stability of Sandwich Beams with Functionally Graded Material Constraining Layer. PhD thesis.
Sahoo, Bishnu Prasad (2018) Characterization of Overburden and Fly ash Materials for Back filling in Opencast Coal Mines vis-a-vis Hydrogeochemical Analysis – A Case Study. PhD thesis.
Sahoo, Kshira Sagar (2019) Scalability and Security of the Control Plane in Software Defined Networks. PhD thesis.
Sankar, B.P. Bijay (2019) Payment Methods and Shareholders’ Gains in Mergers and Acquisitions: An Empirical Investigation into Indian Companies. PhD thesis.
Sharma, Santosh Kumar (2019) Studies on Some Aspects of Implementation of Reverse Logistics in Indian Context. PhD thesis.
Sa, Kadambinee (2018) Electrical, Mechanical and Thermalproperties of graphene-carbon Nanotubes/PMMA Hybrid Nanocomposite. PhD thesis.
Sahoo , Pradosh Ranjan (2019) Critical Delay Computation, Overlapping Interaction Selection and Output Feedback Design for Decentralized Control Systems. PhD thesis.
Sahu, Pradip Kumar (2019) An Optimized Trajectory Planning for Industrial Robots using Mathematical and Heuristic Methods. PhD thesis.
Saha, Sahely (2019) Surface Modification of Ti6Al4V Bone Implants for Enhanced Osteointegration and Antibacterial Property. PhD thesis.
Shrivastava, Sonam (2019) Distributed Secondary Control Schemes for Islanded Microgrid. PhD thesis.
Sharma, Vijay Kumar (2019) Methods for Feature Selection and Appearance Model in Visual Object Tracking. PhD thesis.
Swain, Snehaprava (2019) Development of Strategies for Fault Ride Through Capability Improvement of a Grid Connected DFIG based Wind Energy Conversion System. PhD thesis.
Swain, Sudarshan (2019) Grid Synchronization Control Schemes for a Three Phase Grid connected Photovoltaic System with Power Quality Disturbances. PhD thesis.
Singh, Kasturi (2019) Exploration of New Lanthanide Based Inorganic Phosphors Intended for Light Emitting Diodes. PhD thesis.
S, Sivamani (2019) Nanoscale Zeolite from Low-Cost Resources: Synthesis, Optimization and Application in Wastewater Treatment. PhD thesis.
Swain, Rakesh Ranjan (2019) Design and Evaluation of Composite Fault Diagnosis Protocols for Wireless Sensor Networks. PhD thesis.
Sahoo, Jitendra Kumar (2019) Iron Oxide Based Magnetic Nanocomposites: Removal of Inorganic and Organic Water Contaminants and Antimicrobial Properties. PhD thesis.
Subhashini, K.R. (2019) Development of Metaheuristic Optimization Algorithms for Antenna Synthesis with Array Factor Redefined. PhD thesis.
Shirkole, Shivanand Shankarrao (2019) Finish Drying and Microbial Inactivation of Paprika by Combined Microwave-Infrared Radiation. PhD thesis.
Soni, Amita (2020) Existence and Multiplicity of solutions to some problems in local and nonlocal elliptic PDEs. PhD thesis.
Saxena, Nainsi (2020) Evaporation and Magnetic Field Induced Organization of Nanoparticles for Wetting and Catalytic Applications. PhD thesis.
Sahu, Sushanta Kumar (2020) An Investigation of Dissimilar Pipe Welding of AISI 304 Stainless Steel with CP Copper. PhD thesis.
Sahoo, Shraban Kumar (2019) Novel Graphene Oxide Based Nanocomposites: Synthesis and Application Towards Adsorptive Removal of Toxic Inorganic/Organic Pollutants from Aqueous Media. PhD thesis.
Satish, Lakkoji (2019) Insight into The Impact of Ionic Liquids On the Structure, Stability, And Activity of Proteins. PhD thesis.
Sultan, Eram (2019) Identification and Characterization of a Nonhost Resistance Gene in Arabidopsis against Rice Blast Pathogen Magnaporthe oryzae. PhD thesis.
Therattil, Jose P (2012) Dynamic Modeling and Control of Multi-Machine Power System with FACTS Devices for Stability Enhancement. PhD thesis.
Tripathi, Nagesh Kumar (2012) Production, Purification and Characterization of Recombinant Viral Proteins. PhD thesis.
Tripathy, Satya Narayan (2015) Phase Transition and Magnetoelectric Properties of BiFeO3-RMnO3 (R: Y3+, Gd3+, Dy3+) and Bi1-xBaxFe1-xZrxO3 Multiferroic Nanoceramics. PhD thesis.
Tiwari, Jai Narain (2015) Characterization of Blast Furnace Slag. PhD thesis.
Tripathy, Asis Kumar (2016) Development of Application Specific Clustering Protocols for Wireless Sensor Networks. PhD thesis.
Thakur, Aruna (2016) Influence of Advanced Coated Tools on Machinability Characteristics of Incoloy 825. PhD thesis.
Thomas, Benedict (2016) Vibration Analysis of Functionally Graded Carbon Nanotubes Reinforced Composite Shell Structures. PhD thesis.
Talla, Gangadharudu (2016) Powder-mixed Electric Discharge Machining (PMEDM) of Inconel 625. PhD thesis.
Tudu, Kapura (2017) Experimental Studies of a Direct Injection Diesel Engine Fuelled with Light Fraction Pyrolysis Oil-Diesel Blend. PhD thesis.
Tripathy, Abinash (2017) Sentiment Analysis Using Machine Learning Techniques. PhD thesis.
Tirkey , Vijaylakshmi (2017) Synthesis, Characterization and Reactivity of Ferrocene Containing Organometallic Compounds. PhD thesis.
Thomas, Shweta B. (2018) Coal Layer Thickness Estimation Using GPR Signal Processing Techniques. PhD thesis.
Thomas, Joji (2019) Studies on some Aspects of Meta-Heuristic Algorithms in Solving Engineering Optimization Problems. PhD thesis.
Tripathy, Nilakantha (2019) Investigation of RF Sputtered Calcium Copper Titanate Thin Films and Nanorods for Gate Dielectric and Memory Applications. PhD thesis.
Talapaneni, Trinath (2019) Physicochemical Properties of CaO-MgO-SiO2-Al2O3 Synthetic Slag. PhD thesis.
Tiwari, Ravi (2019) Estimation of User Velocity for Mobility Management in Heterogeneous Networks. PhD thesis.
Tiwari, Nishant (2019) Conjugate Heat Transfer in Single-Phase and Two-Phase Flow Boiling in Mini/ Microchannels. PhD thesis.
Thakre, Kishor (2019) Development of Symmetric and Asymmetric Topology for Multilevel Inverter with Reduced Number of Switches. PhD thesis.
Upadhyaya, Swarnabala (2016) Fast Characterization of Power Quality Events Based on Discrete Signal Processing and Data Mining. PhD thesis.
Vipsita, Swati (2014) Protein Superfamily Classification using Computational Intelligence Techniques. PhD thesis.
Varghese, George Tom (2015) Design and Implementation of a Novel Flash ADC for Ultra Wide Band Applications. PhD thesis.
Vishwanath, Varshini (2017) Development of Silk Fibroin/Chitosan Based Porous Scaffolds for Cartilage Tissue Engineering. PhD thesis.
V, Dani. (2018) Geoinformatics Application in Land use
V, Senthil (2018) Electrical and Photocatalytic Characterizations of Rare Earth Modified Layered Ferroelectric SrBi2Ta2O9 Ceramics. PhD thesis.
Wamankar, Arun Kumar (2015) Experimental Studies on Analysis,Performance,Emissions and Combustion Characteristics of Carbon blends as Fuel in a CI Engine. PhD thesis.
Y, Suresh (2012) Investigation on Cascade Multilevel inverter for Medium and High-Power Applications. PhD thesis.
Yadao, Adik Ramdayal (2016) Dynamic Analysis of Cracked Rotor in Viscous Medium and its Crack Diagnosis Using Intelligent Techniques. PhD thesis.
Yadav, Satyendra Singh (2018) Development of Wireless Communication Algorithms on Multicore/Manycore Architectures. PhD thesis.
Yadav, Arvind (2019) Estimation and Forecasting of Suspended Sediment Yield in Mahanadi River Basin: Application of Artificial Intelligence Algorithms. PhD thesis.
Yadav, Sushree Arpitabala (2019) Synthesis of Enesulfonamides and Benzoxazolidines through Transition-metal Catalyzed C-N Bond Formation. PhD thesis.