Items where Year is 2018
Number of items: 411.
, Rinshu (2018) Assessing Inequity, Catastrophe and Impoverishment in Healthcare Expenditure in India. PhD thesis.
, Sachin (2018) Evolution of Dam Breach and Routing of the Flood Waves at the Downstream Reaches. PhD thesis.
A, Aswin Jagadeesh. (2018) Numerical investigation of Taylor bubble flow distribution in multi cross-branched microchannels. MTech thesis.
MISHRA, ABHISHEK (2018) Effect of Magnesia and Spinel doping on the Densification
Pabari, Pooja (2018) Development of Chitosan/Silk Fibroin based scaffold for bone tissue engineering application. MTech thesis.
., Annu (2018) Assessment of Hydrological Variables With Land Use Change. MTech thesis.
., Nitin (2018) Robot Control Using Motor Imagery in Real Time. MTech thesis.
., Praneta (2018) Development of cyber–crime detection software for Re–compression based Multimedia Forensics. MTech thesis.
., Ritesh Prasad (2018) Study the Microstructural and Mechanical Behaviours
., Ritvik (2018) Control of an Autonomous Underwater Vehicle attached with a Manipulator. MTech thesis.
., Shubham (2018) A Hybrid Trust Based Access Control Framework for Cloud Computing. MTech thesis.
., Vivekanand (2018) Characterization of Arsenite Oxidizing Bacteria with respect to their Application in the Development of Arsenic Biosensor. MTech thesis.
Aadhithiyan , A K (2018) Studies on Hard Chrome Plating on Cylinder Liner of Air Compressor and Numerical Analysis of Cascade Cooler for an Air Separation Unit. MTech thesis.
Acharya, Aditya (2018) Development of Some Spatial-domain Preprocessing and Post-processing Algorithms for Better 2-D Up-scaling. PhD thesis.
Agrahari, Shashank (2018) Designing of Feeding Networks for TCAS Antenna. MTech thesis.
Agrawal, Parinita (2018) Development of Cell-Scaffold Construct for Cartilage Tissue Regeneration. PhD thesis.
Ahmad, Shahzad (2018) Monocular Vision Aided Drone Localization in Indoor Corridor. MTech thesis.
Akbar, Md Taueef Ahamad (2018) Extraction of Maximum Power from Battery connected PV system under Partial Shading Condition. MTech thesis.
Alam, Shamshad (2018) Characterization for Effective Management and Utilization of Red Mud. PhD thesis.
Allaparthi, Muddu (2018) Three-Dimensional Finite Element Analysis of Conventional and Ultrasonic Vibration Assisted Micro-Drilling on PCB. PhD thesis.
Ammaji, Dasari (2018) Improving Localization Ratio in Wireless Sensor Networks using Efficient Path Planning. MTech thesis.
Annam, Dinesh Kumar (2018) Microstructure and Impression Creep Behaviour of AZ91 Alloy with Trace Additions of Sb and Sr. MTech thesis.
Arora, Shashank (2018) Thermo-Hydrodynamics Analysis of Offset Fin in Compact Heat Exchanger using ANSYS Fluent. MTech thesis.
Asthana, Shreyasi (2018) The Effects of Zinc Oxide Nanoparticle Interface on Conformational Dynamics of Protein Models From Different Structural Hierarchies. PhD thesis.
Athira, A. (2018) Hardware Simulation for Face Detection. MTech thesis.
B., Chetankumar (2018) Performance Study of an Automotive Fresh Air Subwoofer. MTech thesis.
Babu, Myneni Sukesh (2018) Modelling and Controller Design of Isolated Buck(Fly-buck) converter. MTech thesis.
Bag, Aurobinda (2018) Development of Adaptive Controllers for Grid Integration of a Three-Phase PV System. PhD thesis.
Balaji, Gunda (2018) Manufacturing and utilization of Fly Ash Angular Aggregate for Sustainable Construction. MTech thesis.
Balaji , C. D. (2018) Effect of Different Milling Operations on the
Bangarraju, K. (2018) Analysis of Device to Device Relay based Communication Network Capacity in Overlay and Underlay modes. MTech thesis.
Baruah, Biswajit (2018) Sintering and mechanical properties of Zr-doped Al2O3. MTech by Research thesis.
Behera, Amarendu (2018) Mitigation Of Power Quality in a Grid Connected PV System Using UPQC under condition of 3 phase fault. MTech thesis.
Behera, Ambika Prasad (2018) Laminar Jet Cooling with Surfactant: A Novel Methodology to Enhance Quenching by Augmenting Stagnation and Parallel Zone Length. MTech thesis.
Behera, Biplab (2018) Selection of vacuum pressure and vacuum implication
Behera, Gitanjali (2018) Authentication in Wireless Body Area Network (WBAN). MTech thesis.
Behera, Kishore Kumar (2018) Optimisation of Ferrochrome Addition Using Multi-Objective
Behera, Santosh Kumar (2018) Development of Improved Active Noise Control Systems and their Real-Time Evaluation. PhD thesis.
Behera, Soumya Ranjan (2018) Influence of Silica Nanoparticles (SiO2)on Electrical and Physical Properties of Mineral Oil and Vegetable Oils. MTech thesis.
Beura, Sambit Kumar (2018) Investigation and Modeling of Urban Street Bikeability from User’s Perspective. PhD thesis.
Bhan, Vijay (2018) Identification of Psoriasis Disease In Dermatology Using Machine Learning Technique. MTech thesis.
Bhansali, Pratik Santosh (2018) Optimisation of Purge Seal for Turbopump. MTech thesis.
Bharadwaj, Diksha (2018) Application of Compressive Sensing in Wideband Cognitive Radio Network. MTech thesis.
Bhattacharyya, Shamik (2018) Development of Advanced MPPT Algorithms and Power Management
Bhave, Swati (2018) Sparse Representation Algorithms and their Applications. MTech thesis.
Bhoi, Yagna Prakash (2018) Photocatalytic Application of Bismuth Based Semiconducting Nanoparticles and their Heterostructures towards Selective Organic Transformations and Degradation of Persistent Organic Pollutants. PhD thesis.
Bhosale, Avadhoot (2018) Studies on Vertically Irregular RC Infilled Frame Buildings. PhD thesis.
Bhuyan, Pranjal (2018) Effect of Operating Conditions, Lobe-number, Clearance Size and Rotor Profile on the Transient Hydrodynamics, Heat Interaction, and Performance of a Root Blower. MTech by Research thesis.
Bisht, Santoshi (2018) Challenges pertaining to Software Engineering in Health Care Systems (A Case Study on Deep Learning based Mammogram Classification). MTech thesis.
Bondada , Vinay (2018) Effect of Magnetic Field on MRR and surface Roughness in Electrochemical Machining. MTech thesis.
Bopche, Vivek (2018) Face Recognition Under Different Lighting Conditions. MTech thesis.
C, Madan Raj (2018) Determination of Safety Integrity Level of a Sugar Plant
Chaitanya, Maddu (2018) Acquisition, Feature Extraction and Classification of ECG Signals. MTech thesis.
Chak, Parul (2018) Fixing up links in social network based on Content Matching. MTech thesis.
Chakrabarty, Avijit (2018) Improvement of Accuracy and Time Requirements in Traditional
Chakraborty, Sudipta (2018) PID Controller Design for Integrating Plus Time-Delay Processes. PhD thesis.
Chandaluri, Sumedh (2018) Robust Dictionary Learning by Error Source Decomposition. MTech thesis.
Chandana, Inapagurthi (2018) Lightweight Anonymous Authentication Protocol in Wireless Sensor Networks. MTech thesis.
Chandra, Shweta (2018) Adaptibe Beamforming using Harmony Search Algorithm for Smart Antenna. MTech thesis.
Charanteja, Rongali (2018) Comparative Analysis of Hysteresis Current Control and SVPWM on FLC based Indirect Vector Controlled Induction Motor Drive. MTech thesis.
Chatterjee, Aditi (2018) Development Of Efficient Control Strategies For Single Phase Grid Integrated Inverters For Photovoltaic Applications. PhD thesis.
Chattopadhyay, Sourav (2018) Human Gait Analysis using Hidden Markov Model Technique. MTech thesis.
Chaudhari, Rohit (2018) Vibration Analysis of Tapered Pre-Twisted Functionally Graded Rotating Blade. MTech thesis.
Chaudhari, Vijay (2018) Trust-Based access control in Cloud Computing using machine learning. MTech thesis.
Chaudhuri, Anik (2018) Document Identification using Allographic Features. MTech thesis.
Chauhan, Arvind Kumar (2018) Assessment of Water Quality Indices of Some Opencast Mines. MTech thesis.
Chaurasia, Bipin Kumar (2018) Mechanical and Tribological Behavior of Eulaliopsis Binate (Short Fiber) Reinforced Epoxy Polymer Composite. MTech thesis.
Chavali, Sai Prakash (2018) Design of Modified LEACH(Low Energy Adaptive Clustering hierarchy) Protocol for Wireless Sensor Networks. MTech thesis.
Choudhary, Abhisek (2018) Fabrication and Characterization of Preceramic Polymer Derived Macroporous Silicon Oxycarbide. PhD thesis.
Chowdary, Chava Venkata Appaiah (2018) Sintering Behaviour and Mechanical Properties
D., Seshu Kumar (2018) Devising Numerical Methods for Simulation, Identification and Control of Fractional Order Processes. PhD thesis.
Dalai, Diptimayee (2018) Modelling of Bicycle Operations at Signalized Intersections. MTech thesis.
Dandapat, Asit Kumar (2018) Evaluation of loss models and effect of LULC changes on surface runoff in Subarnarekha River Basin in India. MTech thesis.
Das, Aparna (2018) Impact of Land use Land Cover Change on Streamflow of upper
Das, Bhabani Shankar (2018) Non-uniform flow modelling in compound channels with non-prismatic floodplains. PhD thesis.
Das, Gobinda (2018) Estimation of Settlement of Shallow Strip Foundation Resting on Soft Clay Subjected to Vertical Cyclic Loading. MTech thesis.
Das, Indranil (2018) Studies on Impacts of Long Distance BRTS on Some Intermediate Stop Location. MTech thesis.
Das, Kaustuv (2018) Amyloid like Property of Large Protein Fibers & its application as a Biomaterial. MTech thesis.
Das, Prateek Kumar (2018) Industrial Wastewater treatment Using Aerobic Inverse Fluidized Bed Biofilm Reactor. MTech thesis.
Das, Prithika (2018) Development and Characterization of Composites filled with Coal Mine Overburden Material and other Industrial Wastes. MTech by Research thesis.
Das, Ritesh (2018) Effect of Xanthan Gum Biopolymer on Engineering Properties of Expansive Soil. MTech thesis.
Das, Soumanti (2018) Effect of a Romantic Song on the Autonomic Nervous System and the Heart of Indian Male Volunteers. MTech thesis.
Das, Sushree (2018) Cost-effective and Fault-tolerant Model for Real-time Analysis. MTech thesis.
Das , Tisan (2018) Range Free Localization in Wireless Sensor Network. MTech thesis.
Dash, Jyoti Ranjan (2018) Modelling and Implementation of a DC Motor Based Wind Turbine Emulator with Self-Excited Induction Generator. MTech thesis.
Dash, Ranjita Kumari (2018) Thermal Management in Three Dimensional Network-on-Chip Based
Dash, Saine Sikta (2018) Flow Modelling of Straight and Meandering Compound Channels. PhD thesis.
Dash, Sudipta (2018) Non-linear Dynamic Analysis and Application of TMD in Controlling Vibration of Building Structures. MTech thesis.
Dawoochund, Renu (2018) Impact of LULC Change on Streamflow in a Mauritius Catchment using IHACRES and HEC-HMS Models. MTech thesis.
Debta, Malaya Kumar (2018) Characterisation of Texture Evolution in Commercially Pure Titanium through VPSC Simulation: a Case Study to Investigate the Role of Strain-Paths on Texture Evolution. MTech thesis.
Dehury, Jitendra Pratap (2018) Random Forest-Based Intrusion Detection System (IDS). MTech thesis.
Delvadia, Soham Dineshbhai (2018) Improved Stand – Alone Solar Battery Charger with MPPT and TSC Algorithms for Quick Charging with Excess Power Extrication. MTech thesis.
Devi, Kamalini (2018) Flow Modelling in Straight Compound Channels with Symmetrical, Asymmetrical and Unsymmetrical Floodplains. PhD thesis.
Dewangan, Gainendra Kumar (2018) Fatigue Crack-macrocrack Interaction in 316 Stainless Steel Sheet. MTech thesis.
Dey, Biswajit (2018) Selection of Dielectric Media (Kerosene and Used Transformer Oil) towards Improving Efficiency of Powder-Mixed EDM. MTech thesis.
Dhananjay , Adarsh (2018) Effects of Various Nanofluids on Different Machinability Aspects of AISI 4340 Hardened Alloy Steel. MTech thesis.
Dhanuk, Umesh (2018) Detailed Study, Modeling and Control of Grid Connected Photovoltaic System with Battery Storage. MTech thesis.
Dhomne, Amit (2018) Age, Gender, Expression Recognition Through Face Using Secure Deep Learning. MTech thesis.
Dixit, Pragya (2018) Fabrication and Characterization of PVDF-Ba0.8Ca0.15Zr0.1Ti0.9O3 (BCZT)
Dutta, Jayita (2018) Emphasizing Safety in Industrial Context: Some Case Studies of MCPI Private Limited. MTech thesis.
Eqbal, Ammar (2018) Development of Highly Anisotropic Porosity in YAG Ceramic by Unidirectional Freeze Casting Method. MTech thesis.
Fopase, Rushikesh Rupchandrao (2018) Immobilization of Urease on Porous Silicon for Chromium Detection in Drinking Water. MTech thesis.
Fulmali, Abhinav O. (2018) Effect of CNT/CNT-COOH Addition on Creep Performance and Water Absorption Behaviour of Embedded Glass Fiber/Epoxy Composites. MTech thesis.
Ganti, Prafulkumar (2018) Review of Electrical Parameters and Performance Evaluation of Shovels in Opencast mines. MTech thesis.
Garg, Vivek (2018) Fly Ash utilization in the Manufacture of Wall Panels. MTech thesis.
Gavel, Vikas (2018) Modelling and Analysis of Pineapple Honeycomb Core Sandwich Composites. MTech thesis.
Ghosh, Abhijeet (2018) Study of Mechanical and Tribological Properties of AZ91/SiC Composites. MTech thesis.
Ghosh, Manoj Kumar (2018) New Synthetic Intrigues Towards Oxidative Dearomatization and
Ghosh, Payel (2018) Development of a Process for Clarification and Concentration of Jamun (Syzygium cuminii) Juice using Membrane Filtration. PhD thesis.
Ghosh, Rupita (2018) Study on the Development of Calcium Phosphate based Machinable Bioceramics. PhD thesis.
Giri, Jyoti Prakash (2018) Development and Evaluation of Bituminous Paving Mixtures Containing Treated and Untreated Recycled Concrete Aggregates. PhD thesis.
Goel, Anuj Kumar (2018) Upgradation of Bio-Gas Using Cryogenic Upgradation Technique. MTech thesis.
Gopinath, Swagathnath (2018) Investigation of biochar application in the growth enhancement of Oryza sativa and the associated soil microbial ecology through PLFA characterization. MTech thesis.
Gorinta, Jayarao (2018) Development of Li4SiO4-based Ceramics for Solid Breeder and CO2 Absorption Applications. PhD thesis.
Gujjula, Vishnu Priyanka (2018) Privacy Preserving Zone Based Service Provisioning in Intelligent Transportation Systems using CL-PKC. MTech thesis.
Gundugolanu, Vijayakumar (2018) Synthesis and Characterization of
Gupta, Ajay Kumar (2018) Performance of Plate Fin Heat Exchanger at Cryogenic Temperature. PhD thesis.
Gupta, Kriti (2018) Isolation and characterization of marine bacteria for value-added products. MTech thesis.
Gupta, Pallavi (2018) Effect of Pre-Strain on Low Cycle Fatigue Behavior of Aluminium 7075 T6 Alloy. MTech thesis.
Gupta, Prashant (2018) Studyon Thermal Characteristics of Epoxy Composites Filled with Micro Size Rutile Particles. MTech thesis.
Gupta, Rajan Kumar (2018) Assessment of Whole Body Vibration Exposure of Hemm Operators in Mechanized Opencast Mines. MTech thesis.
Gupta, Rohit Kumar (2018) Mitigating Distributed-Denial of Service(DDoS) attacks in Software-Defined Networking (SDN). MTech thesis.
Gurmaita, Shival Kumar (2018) An Experimental Investigation on Braided Channel Pattern Due to Variation in Discharge. MTech thesis.
Halder, Arjya (2018) Estimation of Cyclic Period for Blind Cyclostationary Detection. MTech thesis.
Hazarika, Bhaskor Jyoti (2018) Studies on Separation of Curcumin from its Solution Using Liquid Membrane Technique. MTech thesis.
Hazra, Deveshree (2018) Hazard Identification and Risk Assessment and Formulation of Safety Report of Blast Furnace
Hmar, Baby Zaithanpuii (2018) Design and Development of a Pulper for Kendu Fruit. PhD thesis.
Hossain, Md. Mosarraf (2018) Investigation on Electromagnetic Welding (EMW)for Tubular Jobs using FEA. MTech by Research thesis.
Hossain, Sabir (2018) Development of Nano-fibrous Polyelectrolyte Complex (PEC) powder for haemorrhage control. MTech thesis.
Jalli, Sagar Kumar (2018) Numerical study to optimize the heat transfer rate of
Jena, Adarsha kumar (2018) Estimating Parameters under Equality and Inequality Restrictions. PhD thesis.
Jena, Suprava (2018) Performance Assessment of Urban Street Facilities Addressing Improvement Issues of Automobile Mode. PhD thesis.
Jha, Aman Kumar (2018) Structure-property correlation of wear plates. MTech thesis.
Jindal, Nikhil (2018) Development of Lead Free sn-bi-cu Solder Alloy. MTech thesis.
JOSEPH, SHINCE V. (2018) Buckling, Free Vibration and Dynamic Stability of Sandwich Plates with Functionally Graded Material Constraining Layer. PhD thesis.
Joshi, Devendra (2018) Stochastic Open Pit Mine Production Scheduling under Geological Uncertainties. PhD thesis.
K, Bhagya (2018) Properties of Fly ash based Controlled Low Strength Material. MTech thesis.
K, Philip Luke (2018) Seismic Performance of Asymmetric Buildings. MTech thesis.
Kajjam, Aravind Babu (2018)
Kamal, P Raj (2018) Implementation Battery-less Power Management Circuit for Energy Harvesting System. MTech thesis.
Kanaujiya , Prashant (2018) Qualitative Analysis Of Pedestrian Level Of Service In Signalized And Unsignalized Crossing. MTech thesis.
Kapgate, Sachin Nimbraj (2018) Distributed Least Mean Square Volterra Model for the Identification of Nonlinear Systems Using WSNs. MTech thesis.
Kattaguri, Rani (2018) Resistance of CNF Modified Glass Fiber/Epoxy Composites
Kaushik, Shubham (2018) Expulsion of Fluoride and Arsenate from Water Solution by Mg/Fe Layered Double Hydroxide. MTech thesis.
Kesarwani, Abhishek (2018) Development of Trust Based Access Control Models Using Fuzzy Logic in Cloud Computing. MTech thesis.
Khan, Akhtar (2018) Machinability Assessment of Commercially Pure Titanium (CP-Ti) Grade 2 during Turning Operation. PhD thesis.
Kharwar, Jyotsna Singh (2018) Design and Analysis of Different Digitizer Circuits for Non-Intrusive AC Voltage Measurement. MTech thesis.
Kintso, Zapovil (2018) Improving Accuracy of Recommender System using Stack Autoencoder. MTech thesis.
Kiran, Karinki Ravi (2018) Identification of Drought and developing a crop yield model using Meteorological and Geospatial data. MTech thesis.
Koustubh, Bhosarkar (2018) Numerical Simulation of 3 Buffer type Pulse tube Cryocooler. MTech thesis.
Krishnatreya, Dravida (2018) Numerical Analysis to Visualize the Flow Pattern
Kujmar, Kundrapu Shyam (2018) Fabrication and Characterization of Porous Mullite
Kumar, Ajay (2018) Studies on Porous Body of Mgal2o4 Spinel Prepared by Slurry Casting. MTech thesis.
Kumar, Amit (2018) Mapping intricacy in drivers’ satisfaction to define Urban Street Level of Service using Fuzzy logic. MTech thesis.
Kumar, Aniket (2018) Metal Oxide-Decorated Graphene Oxide Nanocomposites for Catalytic and Photocatalytic Applications. PhD thesis.
Kumar, Ankit (2018) Development of Solid-State Derived Strontium Aluminate Based Luminescent Materials. MTech thesis.
Kumar, Ashutosh (2018) Strength and Permeability Characteristics of Indian
Kumar, Avinash (2018) Free Transverse Vibration Analysis of Thin Rectangular Plates Having Arbitrarily Varying Non-Homogeneity Along Two Concurrent Edge. MTech thesis.
Kumar, Ch Sateesh (2018) Effect of Surface Modifications on the Hard Turning Performance of Al2O3/TiCN Mixed Ceramic Cutting Tools. PhD thesis.
Kumar, Deepak (2018) Distributed Traversal Based FaultDiagnosis in Wireless Sensor Network. MTech thesis.
Kumar, Dhananjay (2018) Changing Agricultural Practices and their Impact on Rural Social Institutions in Uttar Pradesh, India. PhD thesis.
Kumar, Dhiraj (2018) Political Ecology of Everyday Resistance and State Building: A Case of the Ho of Jharkhand, India. PhD thesis.
Kumar, Dindukurthi Prasanth (2018) Entry Capacity Modelling of Unsignalized Roundabouts using semi Microscopic approach. MTech thesis.
Kumar, Harinandan (2018) Estimation and Simulation of Gas Permeability as well as Stress-Strain Behaviour of some Indian Coal Seams. PhD thesis.
Kumar, Kilaparthi Praveen (2018) A Simple Direct Power Control of Three-Phase PWM Rectifier using Virtual Flux Estimation. MTech thesis.
Kumar, Nitin (2018) Heart Disease Detection using Machine Learning Techniques. MTech thesis.
Kumar, Pradeep (2018) Heading Control of Autonomous Underwater Vehicle. MTech thesis.
Kumar, Rahul (2018) DataBase Generation for Eye Detection with Spectacles. MTech thesis.
Kumar, Rahul (2018) Resource-Allocation and Load-Balancingin Cloud Radio Access Network for 5G Network. MTech thesis.
Kumar, Rahul (2018) Separation of overlapped latent fingerprints (OLFs). MTech thesis.
Kumar, Randhir (2018) Seismic Performance of Open Ground Storey Building Strengthened with RC Shear Wall. MTech thesis.
Kumar, Ranjit (2018) Identifying Maximal Cliques in Large Scale Network. MTech thesis.
Kumar, Rohit (2018) Analysis of Microstrip Patch Antenna Array using Defected Ground Structure. MTech thesis.
Kumar, Shailesh (2018) LTE based C-IoT Network Security Issues and Protocols. MTech thesis.
Kumar, Sudhanshu (2018) Processing Bio-char and Study of Dielectric Behaviour of Castor Plant Biomass. MTech thesis.
Kumar, Sunil (2018) Effect of Different Heat Treatment Parameters and Copper Addition on the Mechanical Properties of Austempered Ductile Iron (ADI). MTech thesis.
Kumar, Varinder (2018) A Secure Mutually Authenticated Radio Frequency Identification (RFID) Protocol. MTech thesis.
Kumar , Abhishek (2018) Studies on Effect of Wind Induced Pressure on Varying Front and Lateral Faces of ‘C’ Shape of Building. MTech thesis.
Kumar , G Suneel (2018) Chemical Compatibility of a Fly ash-bentonite based
Kumari, Botsa Vasanthi (2018) Active Power Control of Single Phase Standalone Inverter Systems. MTech thesis.
Kumari, Rashmi (2018) Active and Reactive Power Control of Single-Phase Two-Stage Grid-Tied PV System in dq-frame. MTech thesis.
Kumari, Rupam (2018) Software Fault Prediction using Machine Learning Techniques. MTech thesis.
Kumari, Supriya (2018) Bioremediation potential of biofilm forming lead resistant and naphthalene utilizing marine bacteria. PhD thesis.
Kumari, Sweta (2018) Analysis of One-Way and Two-Way Relay Networks Affected by Hardware Impairments. MTech thesis.
L, Bobbiannaik (2018) Autonomic Resource Allocation for Cloud Computing. MTech thesis.
Locharla, Govinda Rao (2018) Variable length FFT/IFFT Processor: Algorithm to Architecture Mapping and Implementation. PhD thesis.
M, Abhinav (2018) Process Aware design & Optimization of Operational Transconductance Amplifier. MTech thesis.
M, Aparna (2018) Synthesis and characterization of titanium dioxide decorated mesoporous silica nanoparticles for bone tissue engineering. MTech thesis.
Mahakul, Prakash Chandra (2018) Fabrication and Characterization of Carbon Nanotubes and Graphene based Organic Photovoltaic Cells. PhD thesis.
Mahamaya, Mahasakti (2018) Development and Characterization of Sustainable Geomaterial Using Mining and Industrial Wastes. PhD thesis.
Mahanto, Parbati (2018) Generation and Prioritization of MC/DC Test Cases using UML Communication Diagram. MTech thesis.
Mahapatra, Ansuman (2018) Framework and Algorithms for Multi-view Video Synopsis. PhD thesis.
Mahapatra, Subhasish (2018) Nonlinear H∞ Control Algorithms for Autonomous
Mahapatro, Soumya Ranjan (2018) Robust Decentralized Control Algorithms for a Multivariable Liquid Level System. PhD thesis.
Maharana, Anmol (2018) Development of saliency based algorithm for brain tumor detection. MTech thesis.
Mal, Suparna (2018) Development of Encapsulated Macrophage Cells Based Immunomodulatory Platform. MTech thesis.
Mallam, Chandra Sekhar (2018) Synthesis and Characterization of ST and NN modified BNT-KNN, BNT-BT-BKT Ceramics for Energy Storage Applications. PhD thesis.
Mallappa , A. Devani (2018) Removal of Heavy Metals from Solutions Using Cajanus Cajan Husk and Butea Monosperma Leaves as Biosorbents. PhD thesis.
Mallick, Nirmal Charan (2018) Study of Algae Growth Using co2 From the Engine Exhaust. MTech thesis.
Mandal, Mithun (2018) Effect of Plastic Waste on Strength of Clayey Soil and Clay Mixed with Fly Ash. MTech thesis.
Mandal, Susmita (2018) On the Design of Key Exchange Protocol and its Variants. PhD thesis.
Mangaraj, Mrutyunjaya (2018) Design and modelling of DSTATCOM Using Various Hybrid ANN Control Algorithms. PhD thesis.
Manhare, Devendra Kumar (2018) Static and Vibration Analysis of Aluminium and Carbon Hybrid Composite Plate. MTech thesis.
Mazumdar, Pramit (2018) Human Mobility Analysis in Location-based Social Networks. PhD thesis.
Meenakshi, S. (2018) Graduate Attributes vis-à-vis IT Employers’ Expectations: A Study on Undergraduate Engineering Education in India. PhD thesis.
Midathada , Sai Venkat Ravi Kishor (2018) Characterisation of Bricks Fabricated Using fly-ash with Different Additive Materials Namely Granite-powder,Alite-
Mishra, Anoop Kumar (2018) Performance Evaluation of Cooperative Relaying Systems with Channel Estimation Error and RF Impairments. PhD thesis.
Mishra, Anshumali (2018) Development of Sulphate and Corrosion resistant mortar using coarse fraction of red mud. MTech thesis.
Mishra, Rabi Narayan (2018) Development and Implementation of Some Controllers for Performance Enhancement and Effective Utilization of Induction Motor Drive. PhD thesis.
Mishra, Ritusnata (2018) Dam Breach Parameters and its Effects on Propagation of Flood Wave at the Downstream of Sarabgarh Irrigation Project. MTech thesis.
Mishra, Sarita (2018) Performance, Structure and Compensation Contract of Indian Venture Capital Deal. PhD thesis.
Mishra, Srimant Kumar (2018) Ratcheting and ratcheting-creep interaction in A356 aluminium
Mohanta , Dayanidhi (2018) Molecular Dynamics Studies of the Effects of Alcohols on Chymotrypsin Inhibitor 2. PhD thesis.
Mohanty, Manasi Manjari (2018) Numerical Simulation of CO2 Sequestration to Enhance Methane Recovery using Multipoint Geostatistics. PhD thesis.
Mohanty, Pratap Ranjan (2018) Topological Issues in PFC Circuit and Nonlinear Controller for Improving Dynamic Performance of AC-DC System. PhD thesis.
Mohapatra, Alivarani (2018) Optimized Parameter Estimation, Array Configuration and MPPT Control of Standalone Photovoltaic System. PhD thesis.
Mohapatra, Kasinath Das (2018) Experimental and Numerical Investigations of Machining Ti-6Al-4V Spur Gears Using WEDM Process. PhD thesis.
Mohapatra, Mousumi (2018) Hazard Identification and Risk Assessment of Rail and Structural Mill and Different Maintenance Activities. MTech thesis.
Mohapatra, Soumyaranjan (2018) Substitution Induced Modifications in Structural, Magnetic and
Mondal, Trinay (2018) Preparation and Characterization of Sintered Mullite Based Ceramics Using Alumina-Fly Ash Mixture. MTech thesis.
Mourya, Vishal Kumar (2018) Non-linear Behaviour of Masonry Infill RC Frame: Influence of Masonry Mechanical Properties. MTech thesis.
N, Jeyashree (2018) Three Dimensional Framework from Graphene Quantum Dots &
Nag, Mamta (2018) Power Aware SQL. MTech thesis.
Namdeo, Himanshu (2018) Strength characteristics of Lightweight Geopolymer and Effect of Pre Heat Curing on Geopolymerization. MTech thesis.
Navane, Vishal Sagar (2018) RS, GIS and MCDM technique based approach for groundwater planning and development in Latur district of Maharashtra in India. MTech thesis.
Naveen S, Namasivaya (2018) Microwave assisted calcium phosphate coatings on carbon fiber reinforced polyether-etherketone composite scaffolds for implant applications. MTech thesis.
Nayak, Dinesh Kumar (2018) C-N and C-O Bond Formation Reactions: Synthesis of N-Aryl Amides, Benzoxazoles and 3(2H)-Furanones. PhD thesis.
Nayak, Kiran Kumar (2018) Design of Electronic Speed Controller for Quadcopter Motors. MTech thesis.
Nayak, Pritish Kumar (2018) Processing, Characterisation and Mechanical Behaviour of Rice Husk Filled Jute Epoxy Hybrid Composite. MTech thesis.
Nayak , Praveen Kumar (2018) Effect of Process Parameters on the Mechanical Behaviour of FDM and DMLSBuild Parts: an Experimental Investigation. MTech thesis.
Nikose, Ritesh Dhananjay (2018) Design of a RESTful architecture for a mobile assisting real-time Health-care system. MTech thesis.
Padhee, Subhransu (2018) Topology, Modeling and Control Aspects of DC-DC Converter for an Off-Grid Operated Fuel Cell Power System Perspective. PhD thesis.
Pagidipalli, Bhanu Chandar (2018) Numerical Analysis of Pulse Tube Refrigerator using Mixture of Gases as the Working Fluid. MTech thesis.
Pai A, Ashwin (2018) Development of a Slope Monitoring System With Long Distance Signalling. MTech thesis.
Painkara, Virendra kumar (2018) Design of Brushless Direct Current Ceiling Fan. MTech thesis.
Pal, Birju (2018) Determination of Hydraulic Properties of Locally Available Soils using Double Ring Infiltrometer. MTech thesis.
Pal, Ketu (2018) Improved Direct Torque Control of Induction Motor Drives to Reduce Torque Ripple. MTech thesis.
Palsule, Prasad S (2018) Studying the behavior of Sodium Lignosulfonate treated expansive soil. MTech thesis.
Panda, Saleema (2018) Nonlinear Finite Element Static and Dynamic Analyses of Stiffened Plates. PhD thesis.
Panda, Sunita (2018) Organisational Efforts towards Effective Executive Talent Management: An Analytical Study. PhD thesis.
Pandey, Vishal (2018) Language Model For Sanskrit. MTech thesis.
Panigrahi , Akash (2018) Experimental Study on Strength Characteristics of Lightweight Concrete with Fly Ash Aggregate. MTech thesis.
Panigrahy, Damodar (2018) Extraction of Fetal ECG Signal from the Single Channel Abdominal ECG Signal Recording. PhD thesis.
Parhi, Bikash Ranjan (2018) Reduction of Bauxite through Hydrogen: Future Method of Extraction of Aluminium. PhD thesis.
Parhi, Debasis (2018) Numerical Study of Shell and Tube Heat Exchanger Using C.F.D. MTech thesis.
Parida, Ananya (2018) Between Rebellion and Resistance: A Study of Select Andaman Penal Narratives. PhD thesis.
Parida, Gati Ranjan (2018) Heat Transfer and Flow Friction Characteristics of Rectangular Plain Fin Heat Exchanger. MTech thesis.
Parida, Jayashree (2018) Rural Livelihoods, Adaptation and Disaster Risk Governance: Understanding Flood-Induced Vulnerability in Coastal Odisha, India. PhD thesis.
Parida, Lukesh (2018) Axial Vibration Of Bar Using Material Point Method (MPM). MTech thesis.
Parida, Sabyasachi (2018) Anomaly Detection in ECG Signals using Deep Long Short Term Memory Networks. MTech thesis.
Parida, Smita (2018) On the Linear and Nonlinear Free Vibration of Functionally Graded Material Plates in the Thermal Environment. PhD thesis.
Parveen, Rasheda (2018) Religion and Sexuality: A Study of Select Indian English Poets. PhD thesis.
Patel, Ashok Kumar (2018) Development of an Online Vision Based Integrated Quality Monitoring Model for Mineral Industry. PhD thesis.
Patel, Bhakti (2018) Identification of Immunoglobulin IgZ and IgM and the Role of Innate Immune Signaling on their Synthesis in Catla Catla. PhD thesis.
Patel, Dhruv (2018) Real-Time ECG Monitoring System Using Android Smart Phone. MTech thesis.
Patel, Sucharita (2018) Development of Adsorption Media by Using Industrial Waste: Red Mud for the Removal of As (V) Ions from Water. PhD thesis.
Patidar, Divyank (2018) Estimation of Power Generation Potential of Agricultural Based Biomass Residues and Coal–Biomass Mixed pellets. MTech thesis.
Patidar, Mohit (2018) Soft Computing Analysis Approach on Spontaneous Heating of Indian Coals. MTech thesis.
Patnaik, Akash (2018) Breakdown Voltage Analysis of High Electron Mobility Transistor. MTech thesis.
Patnaik, Ashish Kumar (2018) Entry Capacity Modelling of Roundabouts under Heterogeneous Traffic Flow Conditions. PhD thesis.
Patnaik, Prabina Kumar (2018) Processing, Characterization and Slurry Abrasion Wear Behaviour of Needle-Punched Nonwoven Fabric Reinforced Polymer Composites. PhD thesis.
Patra, Abhishek (2018) Static and Vibration Analysis of Glare Hybrid Composite. MTech thesis.
Patra, Jyoti Prasanna (2018) Signal Detection and Channel Estimation for Space-Time Block Coded Mobile Communication Systems. PhD thesis.
Patra, Tapas Kumar (2018) A DCT and SVM based Odia Handwritten Character Recognition. MTech thesis.
Patro, Sharmili (2018) Modelling Automobile LOS of Uncontrolled Unsignalized Intersections in Urban Indian context. MTech thesis.
Pattanaik, Jagannath (2018) Comparative analysis of Pedestrian Flow Activities at Railway Stairways: Case Study. MTech thesis.
Pattanayak, Ranjit (2018) Study of Grain Size Effect on Microstructural Conduction Mechanism and Multiferroism of Na0.5Bi0.5TiO3-BaFe12O19 Particulate Composites. PhD thesis.
Pattnaik, Deepankar (2018) Processing Value Added Material From Bamboo
Paul, Binay Kumar (2018) Performance of Additive mixed Electro-Discharge Machining of Inconel 718 Super Alloys. MTech thesis.
Paul, Binay Kumar (2018) Performance of Additive Mixed Electro-Discharge Machining of Inconel 718 Super Alloys. MTech thesis.
Penthia, Trilochan (2018) Performance Analysis and Application of Superconducting Magnetic Energy Storage in a Power System. PhD thesis.
Perumalla, Ram Mohan (2018) Application of Fuzzy Logic for Prediction of Roof Fall Area in the Goaf in Coal Mines. MTech by Research thesis.
Phanideep, Kallepalli (2018) Mineral Identification Using Hyperspectral Image: a Case Study of Gua Iron Ore Mine, Jharkhand. MTech thesis.
Pradhan, Biren Kumar (2018) Static and Dynamic Analysis of Gas Foil Journal Bearing for High-Speed Rotor. MTech thesis.
Pradhan, Prachiprava (2018) Synthesis of modified zeolite and its photocatalytic activity towards dye degradation. MTech thesis.
Pradhan, Sagnika (2018) Catalytic Applications of Surface and Structurally Modified Zirconia Nanoparticles for Synthesis of Biologically Important Molecules. PhD thesis.
Praharaj, Ami t Kumar (2018) Simulation of Electrolyte Flow Pattern and Variation of MRR With Machining Variables in ECM for L-shaped Tool using CFD. MTech thesis.
Prajapat, Vivek (2018) Synthesis and Characterization of Ni-WC-Zr Nanocomposite Coating by Electrodeposition. MTech thesis.
Prakash, Ved (2018) Mechanical and Erosion Wear Behavior of Syngonanthus Nitens Fiber Reinforced Epoxy Composite. MTech thesis.
Pramanick, Sagorica (2018) Static and Dynamic Hand Gesture Recognition Technique using RGB-D Information. MTech thesis.
Pramod, Chaudhari Saurabh (2018) A Comparative Analysis on Factors Affecting Functioning of Airports in India. MTech thesis.
Prasad, Baddi (2018) Effect of Coal Properties on the Generation of
Prusty, Raunak Manoranjan (2018) Climate Change Impact Assessment under CORDEX South-Asia RCM Scenarios on Brahmani-Baitarani River Basin. MTech thesis.
Pulagam, Madhu Kalyan Reddy (2018) Numerical Analysis of a High Pressure Helical Coil
Purbia, Rahul (2018) Sustainable Synthesis of Multifunctional Nanomaterials for Sensing and Catalytic Applications. PhD thesis.
Purohit, Abhilash (2018) Processing and Tribo-Performance Analysis of Polymer Composites Filled with Linz-Donawitz Sludge. PhD thesis.
Raj, Amit Kumar (2018) Natural Period Of Setback Buildings -Assessment Of Is 1893: 2016 Guidelines. MTech thesis.
Raj, Vivek (2018) Experimental and Numerical Studies on Effects of Wind Pressure on “C” Shape of Buildings with Varying aspect ratio. MTech thesis.
Rajesh, Ravi (2018) Numerical Investigation of NACA Airfoil and Wind Turbine Airfoil. MTech thesis.
Rajput, Devanshu (2018) Hazard Identification and Risk Assessment. MTech thesis.
Rakesh, Matla (2018) Spectrum sharing in Cognitive Radio. MTech thesis.
Rao, Karaka Nageswara (2018) Modelling and Simulation of DFIG Based Standalone Wind Energy System with Battery Backup. MTech thesis.
Rao D., Srinivas (2018) Development of Soft Computing Models for Noise Prediction in Opencast Mines. PhD thesis.
Rath, Sushresulagna (2018) Weather Forecasting Using Machine Learning Approach. MTech thesis.
Rathor, Akash Vijaykumar (2018) Authentication in Telecare Medicine Information System (TMIS). MTech thesis.
Ratnam, Aeturi Penchala (2018) Online Detection and Localization of Partial Discharge inside the Power Transformer by using Acoustic Emission Technique. MTech thesis.
Rawat, Himanshu (2018) Path Planning and Control of various moving robots using Artificial Intelligence techniques in unknown cluttered environment. MTech thesis.
Rayudu, Jarapala (2018) Dynamic Behaviour of Buildings Resting on Sloppy Ground. MTech thesis.
Reddi, Krishna Kumar (2018) Measurement of Velocity of Detonation (VOD) of Explosives using Dautriche and Electronic Methods. MTech thesis.
Reddy, K. Guru Raghavendra (2018) Development of Image Processing and Neuro-Fuzzy Based System for Ore Sorting in Mining Industry. PhD thesis.
Reddy, Sadhu ReddySekhar (2018) Grid Synchronisation of IVS based MPPT PV Array Using Damped SOGI Control Algorithm. MTech thesis.
Reddy, Suryakapa Jaipal (2018) Performance Study on Flexible Pavements. MTech thesis.
Ritanjali, Sushree Ritu (2018) Synthesis and Characterization of Anisotropic Nanostructures of Noble Metals (Au, Ag) for Enhanced Optical and Catalytic Applications. MTech by Research thesis.
Rout, Debasis (2018) Engineering Control Measures for Electric Overhead Crane
Rout, Jitendra Kumar (2018) Detection of Deceptive Online Reviews using Machine Learning Techniques. PhD thesis.
Roy, Abhisek (2018) Modification of trip generations following formation of a new district: a study in Kalimpong. MTech thesis.
Roy, Kanchan (2018) Study of Damping in Epoxy-Al2O3/Glass Composite Beams. MTech thesis.
Roy, Pinkar (2018) Optical Music Recognition. MTech thesis.
Roy , Bijoy Krishna (2018) Evaluation of Concrete Strength using Maturity Method. MTech thesis.
S, Jeeva (2018) Bond Strength between the Old and the New Concrete. MTech thesis.
S , Sujaykhosh (2018) Effect of Silicon Carbide as Filler Reinforcement on the Damping properties of Glass-Fibre Epoxy Composites. MTech thesis.
Sahoo, Bishnu Prasad (2018) Characterization of Overburden and Fly ash Materials for Back filling in Opencast Coal Mines vis-a-vis Hydrogeochemical Analysis – A Case Study. PhD thesis.
Sahoo, Biswajit (2018) Study and Analysis of Mobile and Humanoid Robots using Intelligent Optimization Techniques. MTech thesis.
Sahoo, Gyana Manjari (2018) Effect and Analysis of Partial Discharge in Cross Linked Polyethylene Underground Cable Insulation. MTech thesis.
Sahoo, Krishna Kalyani (2018) Optimization of Bacoside a Production in Cell Suspension Culture of Bacopa monnieri for Scale-Up using Stirred Tank Reactor. MTech thesis.
Sahoo, Madhulika (2018) Reproductive Healthcare Rights, Practices and Challenges among the Displaced Tribal Communities in India. PhD thesis.
Sahoo, Moumita (2018) Development of synbiotic functional food using potential probiotic isolates with soymilk and mushroom extracts as prebiotics. PhD thesis.
Sahoo, Mrunmayee Manjari (2018) An Integrated Hydrologic Bayesian Multi-Model Framework for Water Quality and Nutrient Analysis. PhD thesis.
Sahoo, Subhadarshan (2018) The Novel Analytical Methods for the Solutions of Generalized-fractional Order Differential Equations Arising in Physical Models. PhD thesis.
Sahoo , Bibhuti Bhusan (2018) Buckling, Vibration and Dynamic Stability of Sandwich Beams with Functionally Graded Material Constraining Layer. PhD thesis.
Sahu, Akash Kumar (2018) Performance Study of Cryogenic Turboexpander Using Gas Foil
Sahu, Chinmaya (2018) Navigational Analysis of Artificial Intelligence based Control Strategy for Humanoid Robot. PhD thesis.
Sahu, Devasish (2018) Ultimate Bearing Capacity of Strip Footing on Clay Soil Under Eccentric Inclined Load. MTech thesis.
Sahu, Madhusmita (2018) Performance of Used Transformer Oil as Dielectric Media During EDM of Inconel 718 Super Alloys. MTech thesis.
Sahu, Shakti Samanta (2018) Gap acceptance Behaviour and Operational analysis of Bicyclists at Unsignalized Intersections. MTech thesis.
Sahu, Srikanta (2018) Influence of Geosynthetic Encased Stone Columns over Coal Ash Bed. MTech thesis.
Sahu, Uttam Kumar (2018) Environmental friendly iron oxide based magnetic nanomaterials : Synthesis, characterization and application for arsenic removal. PhD thesis.
Sangram, Sangle Priya (2018) Detection of Optic Disc Boundary in Fundus Image of Eye. MTech thesis.
Sangram, Sangle Priya (2018) Detection of Optic Disc Boundary in Fundus Image of Eye. MTech thesis.
Satapathy, Monalisha (2018) Simultaneous Estimation of Speed–Dependent Dynamic Parameters and Residual Unbalances in Rotor–Bearing–Coupling Systems. MTech by Research thesis.
Sekhar, Jonnagiri Chandra (2018) Effect of Interference on Ultimate Bearing Capacity of Strip Footings Resting over Multi-Layered Reinforced Soil. MTech thesis.
Semwal , Nikhil (2018) Experimental determination of apparent fracture toughness of aluminium sheet for varying strain rate. MTech thesis.
Seth, Saurabh (2018) Securing Test Wrapper for SoC using Physical Unclonable Function. MTech thesis.
Sethy , Kiranbala (2018) Development of an Efficient Wireless Power Transfer System. MTech thesis.
Sha, Bibhu Bhusan (2018) Numerical and experimental investigation of common header pulsating heat pipe. MTech thesis.
Shakti, Deepti (2018) Uniformly Convergent Numerical Methodsfor Singularly Perturbed Initial and Boundary Value Problems. PhD thesis.
Shakya, Deepti (2018) Modeling and Validation of Routing Protocol using Timed Colored Petrinet. MTech thesis.
Shankar, Ravi (2018) Assessment of Transport Scenario in Planned and Unplanned Cities. MTech thesis.
Sharma, Ankit (2018) Development of Beta-Tricalcium Phosphate Bioglass Composite Scaffold. MTech thesis.
Sharma, Nitin (2018) Performance Analysis of Heavy Earth Moving Machineries (hemm) in Opencast Mines. MTech thesis.
Sharma, Rohit Kumar (2018) High Volume Fly Ash Concrete. MTech thesis.
SHARMA, SARDA (2018) Wireless sensor network application in monitoring mine
Shinde, Sagar Sangappa (2018) Experimental study on shear streanthening of RC T-Beams using steel wire mesh. MTech thesis.
Shukla, Jaya (2018) Sensor Selection for IoT Services in Fog Environment. MTech thesis.
Shukla, Suyash (2018) Application of Machine Learning Techniques for Assessing Software Reliability. MTech thesis.
Siddiqui, Mohammad Tabish (2018) Study of Sloshing Force in 3-D Rectangular Tank with and without Baffles Under Linear Acceleration. MTech thesis.
Sikder, Sayantani (2018) Abatement of Chromium (VI) and Mobilization of Selected Pollutants Including Cr(VI) in Aquatic Food Chain. MTech by Research thesis.
Singh, Vivek pratap (2018) Comparative Study of Different Faliure Criterion on rock. MTech thesis.
Singh, Anshuman (2018) A Parametric Study of Slope Stability and Comparison of Breach Parameter for Different case of Earthen Dam. MTech thesis.
Singh, Aradhana (2018) Characterization of Bacterial Species by Impedance Measurement
Singh, Gaurav Jaiprakash (2018) Static and Vibration Analysis of Glass Aluminium Reinforced Epoxy(glare) Cylindrical Panel. MTech thesis.
Singh, Naresh (2018) Design of Active Power Filter for a Grid Integrated Photovoltaic System. MTech thesis.
Singh, Ram Ashish (2018) Experimental study on Ternary and Quaternary Blended Cement Mortar. MTech thesis.
Singh, Rohit (2018) Tensile Behavior of Cold Welded Metal-Metallic Glass: a Molecular Dynamics Simulation Study. MTech thesis.
Singh, Sandeep Kumar (2018) Enhancement of Recirculation Process for RH Degasser Steel Making Through Bottom purging Inert Gas: A CFD based Investigation. MTech thesis.
Singh, Subhajit (2018) Surface Roughness Estimation of FDM and DMLS Build Parts. MTech thesis.
Singh, Vinay Kumar (2018) Development and Characterization of Sesame Oil Based Formulations for Controlled Drug Delivery. PhD thesis.
Singh, Vinay Kumar (2018) Engineering Properties of Red Mud and other by-Products based Controlled Low-Strength Material. MTech thesis.
Singh , Vivek Pratap (2018) Investigations on Sudden Unbalance Effects in Overhung Bowed Rotor System. MTech thesis.
Sinha, Yash (2018) Production and Performance of Aggregates Using Two Types of Fly-ash for Lightweight Concrete using Glass Powder as Binder. MTech thesis.
Solanki, Madhav Singh (2018) Fatigue Behavior Analysis of Medium Carbon Steel. MTech thesis.
Soni, Vivek (2018) Improving the corrosion resistance of AE42 magnesium alloys for cardiovascular stents. MTech thesis.
Sreekanth, Peddinti (2018) Eigenvalue Based Blind Spectrum Sensing Techniques for Cognitive Radio Systems Under Low Sample Environment. MTech thesis.
Srinivas, Arava (2018) Estimation of Time Varying Parameters Using Distributed Techniques. MTech thesis.
Srinivasanaik, Azmeera (2018) AFM and STM Characterization of Electrochemically Synthesized Few-Layer Graphene Nano-Sheets. MTech thesis.
Srinivasu, Ulli (2018) Semi-Supervised Learning in Random Forest Classifier for Human Action Recognition. MTech thesis.
Srivastava, Apoorva (2018) Path Following Control of Autonomous Underwater Vehicles. MTech thesis.
Subba, Devyani (2018) Analysis of the Public Transport Network for a Multiple-core Hill City, Darjeeling. MTech thesis.
Sunil, Kanchi (2018) Development of Sensor-less MPP Tracker using Adaptive Ramp Technique for Photovoltaic (PV) Applications. MTech thesis.
Sunil, Pidathala (2018) Gate Operations of Multi-Purpose Rengali Dam for Flood Management in Downstream Areas. MTech thesis.
Swain, Ashirbad (2018) Viscoelastic Modelling and Dynamic Analysis of CNT-based Composite Shell Panels. PhD thesis.
Swain, Janaki Ballav (2018) Streamflow Estimation in Ungauged Catchments through the Process of Regionalization. PhD thesis.
Swain, Mahendra Kumar (2018) Forced Vibration of Isotropic and Nonhomogeneous Rectangular Plate of Linearly Varying Thickness. MTech thesis.
Swain, Priyadarshi Tapas Ranjan (2018) Mechanical, Thermal and Tribological Behaviour of Surface Modified Jute Fiber Reinforced Epoxy Composites. PhD thesis.
Swapna, Tentu (2018) Adjustable Windowing for Transmit Beam forming in MIMO Wireless Rayleigh Fading Channel. MTech thesis.
Talekar, Vikram Rambhau (2018) Fabrication and Characterization of Various Nano-oxides Dispersed W-Ni Alloys by Mechanical Alloying and Conventional Sintering. MTech thesis.
Teja , Undru Prasanna Ravi (2018) Synthesis of Cu/Gr Nano-composites by Electrodeposition Route. MTech thesis.
Thakre, Deeksha (2018) Study and Development of Error Diffusion Techniques for Digital Halftoning. MTech thesis.
Thomas, Shweta B. (2018) Coal Layer Thickness Estimation Using GPR Signal Processing Techniques. PhD thesis.
Thorat, Ninad (2018) Human Activity Recognition Using Deep Learning. MTech thesis.
Toppo, Neha Mary (2018) Control of Three Phase Grid Connected Photovoltaic System. MTech thesis.
Trivedy, Saibal (2018) Production of High Reactivity Coke by Utilization of Low-Grade Coal and Steel Plant Wastes. MTech thesis.
V, Akhila (2018) Application of Artificial Intelligence Techniques in Calibration of Ground Penetrating Radar. MTech thesis.
V, Amrutha (2018) Generation of MOSFET Switch Operated High Electric Field for Electroporation Application. MTech thesis.
V, Dani. (2018) Geoinformatics Application in Land use
V, Senthil (2018) Electrical and Photocatalytic Characterizations of Rare Earth Modified Layered Ferroelectric SrBi2Ta2O9 Ceramics. PhD thesis.
Varghese, Soniya Mariya (2018) Development of Functionalised Nano-catalysts for Enhanced Catalytic/photo-catalytic Applications. MTech thesis.
Vasimalla, Mounika (2018) ECG Arrhythmia Classification Using Convolutional Neural Networks. MTech thesis.
Verma, Anmol (2018) Assessment of Operators Exposure to Whole Body Vibration in Iron Ore Mines. MTech thesis.
Verma, Sachin (2018) UAV Pose Estimation in Indoor Corridor Using Monocular Vision and Deep Learning. MTech thesis.
Verma, Sarthak (2018) Milling Characteristics of BCC, FCC and HCP Metals. MTech thesis.
Vijayakumar, Greeshma (2018) Speech Recognition System for Malayalam Language. MTech thesis.
Vishwakarma, Bharat Kumar (2018) Modelling of Kinetic Energy and Momentum Correction Coefficients in Straight, Meandering and Braided Channel. MTech thesis.
Vishwakarma, Sunil Kumar (2018) Effect of Pumice Stone Aggregate on the Fresh and Hardened
Visvakarma, Ravi Kant (2018) Modeling of Distributed Maximum Power Point Tracking Photovoltaic System. MTech thesis.
Yadav, Satyendra Singh (2018) Development of Wireless Communication Algorithms on Multicore/Manycore Architectures. PhD thesis.
Yadav, Sunil Kumar (2018) Recrystallization Texture Evolutionin Ti-6Al-4V Alloys. MTech thesis.
Yadav , Surendra Prasad (2018) Study on Effective Thermal Conductivity of Fiber Reinforced Epoxy Composites. MTech thesis.
Yadlapalli , Bharath Kumar (2018) Synthesis and Characterization of Cr-WC Composite Coatings by Electrocodeposition. MTech thesis.
Yadu, Gitika (2018) Understanding the physiological effect of a motivational song on the heart and the autonomic nervous system of male volunteers by ECG and RR interval signal processing and analysis. MTech thesis.
Yeole, Shashank (2018) Fingerprint Recognition System Using Method of Sectoralization. MTech thesis.